UBEE access point appear on my network infrastructure

Similar Questions

• RalinkAPS wifi chipset appears in the network infrastructure

  I just noticed a device appear in my 'Network Infrastructure' called RalinkAPS. I didn't have it there a week, I've been doin a little bit of research and it could be the chipshet of wifi on my router?

  The router is a Thomson/Technicolor TG585 v7; or would it be an ad-hoc link somehow to the router?

  Hello

  The APS Ralink is a WiFi chipset on the router.

  RALink chipsets are used in various consumer-grade routers made by Gigabyte Technology, Linksys, D-Link, Asus and Belkin, as well as adapters Wi - Fi for USB, PCI, Express Card interfaces, PC and PCI Express cards.

  For more information about Ralink see the link below.

  http://www.ralinktech.com/about-us.php

• Pavilion 15 ab214TX: access point does not (hosted network supported: No.) (Realtek RTl8723BE)

  I am not able to hotspot with the software or cmd. I have only checked in the Device Manager, there are no drivers "Hosted Microsoft Virtual network adapter" available. I have the latest driver for my wifi (Realtek RTl8723BE) card. Also in the cmd... supported hosted network said NO! can someone please me the latest drivers

  

  installed this version of the driver... I think it is assigned by microsoft... everything works fine now

  

• UNMANAGE an access point light on the MAIN Infrastructure

  Hi guys,.

  is there a way to unmanage a lightweight AP (LAP) on the Cisco Infrastructure FIRST, but keep it on the WLC management?, we want some of the life cycle free licenses.

  Currently, we have a problem of license because when we add a WLC FIRST automatically adds all of its associated towers (115 aprox.) and they consume almost all lifecycle licenses available (125), causing that we cannot add another 10 aircraft for their FIRST management.

  Is it possible some of these tricks FIRST unmanage but to keep their management of their corresponding WLC (in order to free some licenses of life cycle)?

  Thank you in advance!

  Kind regards

  Sorry, but only you can do.

  Once you succeed a WLC, all its associated with APs are also managed and therefore consume licenses of life cycle.

• Set up home network of multi access point

  Recently, I cut the string so to speak with directv and is passed to a streaming cable through view PlayStation. However this left me with a little slower network I want to. I have a 3-storey house in a crowded area and my cable modem is on the lower floor.

  Currently, I have a linksys ea3500 connected to a modem cable in the basement. I have a family room on floor 2, where I connected PlayStation. On the third floor, I have a Roku in the bedroom for live tv broadcast and also a Home Office.

  I can work around 70mbps down when connected via Ethernet to the ea3500 on the ground floor, but a signal wirelessly on the second floor is about 25mbps down and falls to 15 or so away on the third floor.

  I ordered a new router (wrt 1900ACS) and also a netgear powerline 1200 kit. My plan is to connect the line adaptor to the ea3500 and place another line on two ground adapter. To which I would link the wrt 1900 and run as an access point for the existing network. I would also link the PlayStation to the wrt1900 through cat 5 to improve the reliability of the connection.

  My hope is that this will greatly increase my speed of download available in the House. We are connected fairy and at any time have probably 10 to 15 devices (tablets, phones, laptops, TVs, desktop, nest, etc.)

  Given my current gear (and the warning that I won't have to run wires through the wall or through the vents) is the configuration I describe the best way to increase the signal strength and bandwidth bandwidth/speed? Does it matter if I use the new wrt 1900acs as a slave to the ea3500, since it will be connected via the power line to the ea3500 lan port? Should I just unplug the ea3500 and only use the 1900acs on the Middle floor and connect the power supply line direct adapter to the cable modem?

  Any idea to my plan or recommended changes to my plan would be appreciated!

  It's good then let the EA3500 and add the WRT1900ACS in via PowerLine Bridge Mode.

• Print Epson printer States: a router/access point channel conflict detected - improve your wireless network environment?

  I try to print from my laptop on my Epson printer.  It will not work on any of the documents or the internet.  The Epson prints what follows: a conflict of channel router/access point - improve your wireless network environment, has been detected.  My router is sitting next to my printer and the laptop.  The Green WiFi light on the front of the printer is on.  I have no problem using my Ipad in the other room.  So does mean printing?

  It's that all the documents, both new & saved and the same Wordpad?

  Maybe

  http://support.Epson.ru/products/manuals/102044/Panel/g_html/external/manual_e01.htm

• How connect N600 router wndr3400v3 to another hotspot or wifi ssid access point

  I want to connect to my router to an another ot hotspot or access point ssid to increase network range

  I tried but not found any option

  Help, please

  Ok thank you

• A WRT160N V3 can be used as wireless access point.

  I have an AT & T's broadband router.  A WRT160N is connected, so I now have Wireless N capabilities.  I have a second WRT160N I want to put in my living room as a point of access, so I can connect my BluRay player and video stream.  How can I configure the second WRT160N as access point?

  Thank you in advance,

  Andrew

  Topic 1. Yes, you can use your second WRT and put in place as a second access point to your network. First of all, unplug the second WRT to your network and wire a computer in one of its LAN ports. Open the web interface at http://192.168.1.1/ on the main configuration page, change the address LAN IP of 192.168.1.1 to 192.168.1.2 and disable the DHCP server. Save the settings. Unplug the computer and connect the cable to the first router on one of the second router's LAN ports. Do not use the internet port of the second router! Now you can use the wireless access point in the second router as access point additional for your network.

  For a wireless roaming the two Wrds with identical wireless settings (SSID, wireless security, etc.) and don't forget to enable the SSID broadcast. Only the channel assignments should be different. Different channels spaced at least 5 avoids duplication of canals. Now your laptop can connect to your network via either WRT and internet through the first WRT. It must also be able to move between the two Wrds without losing the connection.

  Re 2. Because the WRT160N has only the ethernet 10/100 ports a CAT5e cable should do. Of course, you can consider getting a better cable, for example a cat6 for future enhancements to your network. It depends on how much effort it is necessary to replace the cable later if you decide to go for gigabit ethernet on your local network.

• Unknown to router in the Network Infrastructure

  Hello

  There is a unknown router which is not mine not appearing in the Network Infrastructure.

  I understand why it show up under available wireless networks. But not the network infrastructure.

  I have not connected to it, is not my router, and it is not there. It is a little disconcerting, to say the least.

  Here is a screenshot:

  http://www.imagebam.com/image/2ed1ec73539535

  Cisco Wireless VPN router - N is mine.

  WNR1000v2 isn't.

  Is this a security risk? Why is this, and how do I get rid of him?

  Thank you.

  (Essentially the same problem as this):

  http://social.answers.Microsoft.com/forums/en-us/w7network/thread/34a7d2d7-1498-43C9-ACEC-2bc8a7087613

  OK so I would like to know what criteria determines why a router is listed in the network infrastructure... and how to get rid of him?

  Why is windows 7 this? It makes no sense at all...

  Can't really answer. I can only say that turning on the Details view for the page shows that the alien router isn't listed in my network location. A network infrastructure device is that in theory I 'could' connect to research a little further into the router configs (properties because it gives model, series No, MAC address and unique identifier #) indicates that the owner has set up to use WiFi Protected Setup to allow wireless devices to connect (requiring a fixed number of pine).  So, if I had the PIN to the router, I was able to connect to its network. Maybe that's why it appears. If your mystery router is configured in the same way, this could be a further indication as to why these routers being listed in the title of the Network Infrastructure while all other neighboring routers are not.

• Error message 'Please select the access point or wireless router to set up' when you set up a network

  Original title: set up a network.

  I want to create a wireless network for the games, and when I click on the network. A screen comes written on this "Choose the access point or wireless router to set up" and that "it might take 90 s for devices reconfigured to appear on your computer.

  But no device never appears below it, even after 90 minutes.
  Please help me with this.
  It was so easy in windows 7.

  Hi Manas,

  What is the brand and model of the Wireless Router/Access Point?

  Given that the issue has not persisted in Windows 7, there is a chance that the wireless router/Access Point is not compatible with Windows 8.

  Please check the links below on the implementation of a network.

  http://Windows.Microsoft.com/en-in/Windows-8/Setup-home-network

  http://Windows.Microsoft.com/en-in/Windows-8/what-you-need-Setup-home-network

  http://Windows.Microsoft.com/en-in/Windows/set-up-wireless-router#set-up-wireless-router=Windows-8

  http://Windows.Microsoft.com/en-in/Windows-8/Add-device-or-PC-to-network

  Answer please if you have any questions.

• Satellite C660 - no access Internet - yellow exclamation point appears

  Hello

  I have a toshiba Satellite c660 and there serious internet problems.
  When I turn it on, it says that I don't have access to the internet but when I try to use it, a yellow exclamation point will appear then down down on the wifi icon.

  If I click on the internet icon and it says im connected to the internet, but I have no internet access.
  I'm really confused as to what to do. Internet days might work for a while and then all of a sudden the exclamation point appears there and I can't get working again.

  If anyone has any ideas on what is wrong or how to fix Tournay would be GREAT. as for now I can't use the internet wireless on my laptop.

  Thank you.

  Hello

  I think there could be a problem with your WLan router.
  I recommend to reset the router and try again

  If this is not enough, clear all settings of encryption like encryption, password encryption, mac address filtering, etc. and try to connect again to open WLan.
  But this just for testing purposes

  If the connection would be functions, you must configure the router once more.

• PS B110a - wireless configuration will fail if the network has multiple access points

  Photosmart B110a (CN245B) wireless AIO printer.

  I have several wireless access points using the same SSID to provide coverage over a large area. When you install the printer on the screen TouchSmart wireless installation fails. Print report reveals the following error:

  "More than one access point/router wireless was found which matches your network name (SSID). If this is not intended, your HP printer can connect to the wrong network. »

  In my case this IS planned but there seem to be no available option to answer "OK, just connect to any point of access by using my SSID.  If I turn off all but one the APs configuration complete OK. If I have to do every time I turn on the printer the printer is USELESS for me.

  Did I miss something?

  sijomi

  This should not be a problem.  I have a B110 (and another 10 or so HP wireless printers) on a network of airports with 5 access points and they just connect.

  Here are a few suggestions:

  1. don't use WEP - use WPA or WPA2 with a 13 + character password.

  2. enable the SSID broadcast on all access points

  3. do not use the MAC filtering acddress

  4. make sure "AP isolation" or "isolated wireless" is disabled.

  5. make sure that you are not on a private network, virtual, or connected to your network of comments.

  6. If different strings on access points do not work, try the same channel.

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet.

  I have my laptop can't detect a wireless adapter or access point. It shows that the network connection is excellent but I can't always connect to the internet. It happened suddenly and with no warning or cause. I tried to turn off the modem for 10 seconds and turning it back on, but I still had the same problem. What should I do? Help, please.

  Hello

  Maybe this can help, http://www.ezlan.net/wireless.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• How to install a HP printer wireless network using an Access Point in Windows 7

  
  

  Let me know if you have any questions or need help to install a HP printer wireless network using an Access Point in Windows 7.