UCS in switch mode

Similar Questions

• Fabric of interconnection in the care of the CF NPIV Switch mode? If anyone can confirm?

  Hello

  I'm working on a scenario where a client will make Direct Attach Storage for a pair of UCS fabric of interconnections. It will also need to connect a device of backup based on the CF to the FI. So let's run the s FI mode Switch CF.

  There apparently is a virtual machine on the blades which must have virtual HBA running in order to access their specific LUN.

  The question is whether the fabric interconnect (version 2.1(3b)) will support NPIV when running in the FC switch mode. Or the GUI or CLI Configuration guide mentions this, and I have not any FI to connect to check.

  Can anyone confirm this, either by pointing to a URL where it can be clarified or by connecting a FI Switch FC mode and by:

  connect nxos

  have SH

  or see the race |  feature Inc.

  and check if the npiv feature is enabled or not?

  Thanks a lot for your help

  Gustavo

  NPIV is by default active! See screenshot below

  Tanti saluti

  Walter.

• Yoga 2 Pro: randomly switches modes even when closed and the peripheral use

  I recently bought a Yoga 2 Pro, and I love it, except for an extremely annoying issue.

  It toggles randomly modes on me without moving the screen. I have not been able to develop a model for switching, it seems to be completely random. This morning I use this connected to a monitor of periperal via HDMI with the lid closed, and it was fine for about an hour and then started switching of the modes - tablet, back to laptop, the marquee, stand up, back to laptop, for tent...

  One of the benefits of its use with peripheral keyboard are the other modes don't disable the keyboard, but it is to randomly change the orientation of the screen. When I used it on its own without the devices, I can be typing away in the configuration of the laptop and all of a sudden it switches modes and the laptop is disabled.

  Sometimes, it is very well for hours and then will be randomly 10 times in 30 seconds.

  I know that I can turn on the rotation lock, but I just that it works correctly. He has been behaving in this way since the first night I bought it.

  All my windows updates are current and I reinstalled the drivers of transition of Yoga.

  Help, please. I need my computer for United work and cannot have a malfunction all the time and also cannot afford to lose if, during a period of time to have it fixed.

  I think it's finally fixed, but he forced me to return the unit for repair.

  Repair Center took two will solve the problem, but the ultimate fix seems to have required the replacement of the LCD: I guess there is some kind of sensor attached to the LCD unit. They replaced the motherboard and reconfigured the unit before replacing the LCD screen, so I can't be certain that he was not also a problem with the motherboard.

  So I guess I would recommend all those who encounter this issue gets their unit in a Service Center for repair before the warranty runs out. The warranty repair process wasn't as smooth as I would have liked, but ultimately it looks like my machine works fine now, and I don't think that any amount of waiting for updates of pilot would have set it.

• Switching mode of EPC 3925 / router E3000 speed 20% loss

  my setup is EPC 3925 Switch mode - E3000 router mode

  my ISP speed is 200 Mbps I only have 160 MB/s maximum and is not stable

  When I use the EPC 3925 I get 200 Mbps

  can someone explain why this happens

  takwansani wrote:

  Thanks Meegosh and nerD_sayer for answers

  one last question what happens if ask my ISP to swap the 3925 to a modem router as the 3208

  I gain speed?

  Yes. It is better to have just a modem ordinary to avoid double NAT issues as well as port easier opening if it is necessary to do so.

• E2000 in Switch Mode

  My home network is configured with a box from Netgear 8 port that the server DHCP and an E2000 to wireless access (and some wired so ports) to set the mode.

  Since the E2000 is no longer a DHCP server, it loses its IP 192.168.1.1 address and appears to be assigned as 192.168.0.8.  When I try to access the E2000 this new address using the browser based utility, the expected login screen appears, but it doesn't seem to be a password that works.  According to the instructions of the key WAP is supposed to be the password and it worked before when the E2000 has been implemented as a router.

  I think that I do not understand something here.  Comments?  If I need/want to change the settings am I forced to reset the E2000 and start every time if I use switch mode?

  Nevermind... According to the best information I can find, a switch is not displayed as a separate device in a table of DHCP addresses

• MS NLB Multicast configuration on Cisco Bladecenter switches mode

  We seek to MS NLB Multicast configuration on Cisco Bladecenter switches mode. We are adding static ARP and CAM entries for each port on the switches kernel that

  the Bladecenters are connected to, or just the port of the virtual machine arrives at

  push traffic at this time here? If we add it to a single port,

  How vmotion will work... because it seems that we have to manually

  transfer the arp from one port to the other entry.

  We add the static ARP entry to the entire Cisco switch. If you can VMotion VMs NLB to another host that is physically connected to another switch, then this switch have thus added ARP entry. We have not tested the configuration only on the specified ports. But if you do, make sure that you include all the ports connected to the physical switch (if for DS you have four natachasery configured in a vSwitch...).

  Here's a guide to how we have configured it several times in our society.

  http://www.VI-tips.com/2009/04/NLB-in-VMware.html

• UCS to SAN Brocade FC Switch mode

  Is it possible to connect a network SAN FC Brocade for interconnections of fabric once to have them put in place mode Switch CF?

  Thank you

  Hello Dani

  No! We do not support interop modes!

  the only solution is running FI in NPV mode and Brocade in Access Gateway (NPIV)

  Why is this not possible? We have many installations of UCS, connection to a cloth of Brocade with NPV mode

  Walter.

• Uplink Ethernet UCS Portchannel LACP mode

  Hello

  UCS just support LACP uplin portchannel, someone could advise the mode (active, passive or on) the portchannel LACP is running on?

  Thank you very much!

  I checked and 'Active' mode is the only option in EHM mode and switch.

  Kind regards

  Robert

• ZBook17: How can I keep my laptop switch mode 'sleep'

  How can I keep my computer to switch into mode 'sleep'. At the moment, the screen turns off in a minute about. I adjusted all the settings of power, but nothing seems to help.

  I regret that none of these steps seems to fix your problem, it's frustrating. Here are some more that you can try to see if the problem is resolved or changes in some way:

  1. Installation/update antivirus application and definitions, then run a virus in Windows scan check that no virus or malware
  2. Disabling hybrid sleep in Windows
  3. Disabling the requirement for password during the resumption of the mode standby
  4. Try a different power source

  If you need instructions on how to perform these tasks, see the following document:

  http://support.HP.com/us-en/document/c03383935#AbT2

  Thank you!

• No LAN after the switch mode user or sleep on Satellite L555-135

  If it can help someone,
  I had some problems after my L555-135 of wake-up after a sleep or when I used the switch user on Seven 64 mode.
  No network detected.

  I can't find any update on the Toshiba site or windows update.

  I download from the realtek site this driver and everything is OK now.

  http://218.210.127.131/downloads/downloadsView.aspx?langid=1&PNid=7&PFID=7&level=5& Conn = 4 & DownTypeID = 3 & GetDown = false

  It is really strange and shouldn't happen with the original preinstalled recovery image. All images are tested.
  In any case, thanks for the info and the link.

• Yoga 2 Pro - how to disable notifications from switch mode - for example mode "attempts", "tablet mode", etc.?

  Anyone know how to disable the notifications that appear in the upper right say you that you have just changed from one configuration to another - for example switch from the tent to the Tablet mode?

  It is not enough to uninstall the "Yoga Picks" modern application, you will need to uninstall the office by going to the desktop control panel > programs and features > uninstall a program > Yoga Picks > Uninstall.

• switch mode

  Hi all. I am a student of the University (currently in thesis) required instrumentation OR its function. The University has made avaiable for me an NI USB-6289 data acquisition and LabView software for the manipulation of data. For the first part of the experiment was quite simple to implement software and hardware (even though I'm no expert so) and I have no problem. Now for the second part, I need to know if it is possible with the DAQ 6289 to simulate a sort of switch between 2 power supplies of entry mode (which will describe a square wave current) automatically. In the first part, in fact, I manually generate the 2 inputs (0.5 intensity, ON1 for 30 sec, OFF1 for 20 sec, ON2 for 30 sec OFF2 for 20 dry and recycled) because of the few cycles I had to do. Now, I want to simulate a fatigue test so I want at least 500 times his cycle. I hope I explained my problem. Sorry for my bad English, I know that I need to improve.

  Thanks in advance.

  Manuele

  PS: now power supplies are not directly related to the acquisition of data, because the input power that generates I move a target for a laser. So I measure the movement of this goal (the laser is a data acquisition channel) which is the variable that I'm interested in. For my new goal I would connect the feeds too, but I don't know if it is possible to simulate what I want.

  I recommend you find some static relays to control your diet.  You can then control the relays with the OID on the acquisition of data.

• Mini of the UCS + 4 switches, no VLAN

  Hi all

  I have a mini UCS with 6324 modules e/s with B200 m3 x 5 blades, each ESXi 6.0 running.

  I want to uplink the UCS mini with four cables to four switches separated for traffic, and I wish that each host ESXi b200 see four separate vmincs, one on each network. The switches have no VLAN, but running DHCP. I want to get DHCP from each card.

  How can I go on the correspondences between the vNIC?  Groups of LAN Pin?

  Hi Alex,

  That is right. You can also implement Layer 2 disjoint explained in the guide below for more secure access.

  http://www.Cisco.com/c/en/us/solutions/collateral/data-center-virtualiza...

  I hope this helps.

  Qiese Sa'di

• interface of the router switching modes

  I would like to know the best type of mode switching for router interfaces. I have connections VPN site to site on the Wan. Can I use the command interface "no ip route-cache"? What other options are there? No matter if you run VPN vs frame relay? Is there an article someone can show me?

  Thank you

  RJ

  1. turn on all interfaces, the router will handle the buffering if it cannot transmit data fast enough, it'll be even less load on the CPU of the router.

  2. Yes, definitely do.

• Before issuing with pictures to develop the switch mode

  I use lightroom cc 2015.5 on windows 7 for specific this question, but I also run lightroom 5.7 at home on a mac that doesn't have this problem.

  When I am in library mode, photos looked fine. When I switch to develop fashion, the same picture looks like the attached screenshot. In addition, the images load much more slowly that waiting for a processor quad-core i5 @ 3.1 GHz box. I tried to update but LR "updates" in the Help menu option is gray - I don't know what that means.

  

  Any help would be appreciated!

  Stu

  Got to edit > Preferences > Performance and uncheck CPU chart use.