UCS Manager emulator - cannot launch KVM

Similar Questions

• Error UCS Manager Console KVM to open after Java Update

  After the upgrade to version 1.7_21 Java I tried to access the KVM console from within the UCS Manager (v2.1 (1 d)) and get the error message:

  "Cannot run the program"C:\\Program": CreateProcess = 2 error, the system cannot find the file specified."

  I tried to remove installed applications and applets as well as temporary files from the Java console inside, but it does not solve the problem. We also tried to launch the console KVM in KVM Manager and that works very well. Everything works correctly when you run Java 1.7_17.

  Everyone knows about this problem since upgrade to 1.7_21?

  Thank you.

  In the meantime, you can install Java in a directory path that has no space to work around the problem. For example: c:\Java\jre7

  This will give you access KVM again.

• Cannot launch Adobe Application Manager

  Under Mac OSX Lion Macbook Pro with Adobe Creative Cloud. When I try to launch Acrobat Pro, Application Manager tries to launch, but none came. Occurs whenever I try to launch Acrobat, so Acrobat will not work. Suggestions? I noticed there is no uninstall for Application Manager. I can just trash and try to reinstall?

  Hi Dave,.

  Acrobat X has already worked? I would try to run uninstaller for Acrobat applications > utilities > Adobe Installers if avaiable, restart and then start Adobe Application Manager first of all within the Applications and then reinstall Acrobat.

  -Dave

• 6120 link down on mgmt0 triggers not UCS Manager failover cluster - is?

  Hello friends

  We have recently installed a cluster consisting of two 6120 UCS s configured for HA. When executing fail during test cases, we removed the network cable in mgmt0 on 6120 elementary. Immediately the cluster IP address is not responding ping (as expected) and we lost connectivity to the UCS Manager GUI (also as expected.) At one point, however, we expected the 6120 subordinate to detect that this link was down and launch a failure over the UCS. This is not moved after 20 minutes of waiting.

  My questions are the following:

  1. Is this expected behavior?
  2. If this is not the case, what should us review to ensure that failover occurs in the future?

  I know we can force a failover of the subordinate by issuing a command to the main cluster of local-mgmt but would be interested to see if it should be automatically produced on the failure of primary mgmt0 binding.

  Thank you for your time.

  Configured by default which is the expected behavior.

  You can configure management interface and failover if the management interface loses connectivity such as your test scenario.  That's what you're looking for.

  Admin - Communication Management - Management Interfaces - Management Interface tab strategy control tab.

  

  Kind regards

  Robert

• UCS Manager 2.2 - LDAP authentication

  Hello

  I have some general questions about authentication LDAP and UCS Manager.

  I hope it's unterstandable...

  We have the following structure:

  • DC = Company.domain.com
    • OU = Domain Administration
      • OU =Administrators
        • UO = Germany
          • CN = User1-SMA
          • CN = SMA-user2
      • OU = Test-UO
        • CN = ucstestuser
        • CN = ucsadmingroup--> Member = SMA-user1, user2-SMA
          

  I added an LDAP provider

  binduser is the SMA-User1

  Base DN = OU = Domain Administration, DC = company, DC = domain, DC = com

  attribute = empty

  filter = sAMAccountName = $userid

  password for User1 SMA

  group permission / recursive enabled.

  I have not add some attributes or map the group. Now I can connect with ucstestuser (read-only), but not with SMA-user1 user2 SMA oder.

  If I add ucstestuser to ucsadmingroup a map of this group, ucstestuser can access and have right to admin, ADM-user1 and user2-adm cannot access (user authentication failed).

  I don't understand, why ucstestuser can access and other users in a different OU not. Unique database name is domain Administration, so that UCSM should see all three users, not?

  Can anyone help? Thank you.

  / Danny

  With UCS remote authentication when a user connects using a temporary account on the FI as a UCS-MyAuthDomain\myusername, which is limited to a total of 32 characters.  If you shorten the name of domain authentication defined in UCSM domain.com to a shorter name as AD, it will allow for the use of a username any longer.

  Note

  For systems using the remote authentication protocol, the authentication domain name is considered to be part of the user name and the limit of 32 characters for usernames created locally. Because Cisco UCS inserts 5-character formatting, the authentication will fail if the name and the user character domain name combined total is greater than 27.

  http://www.Cisco.com/c/en/us/TD/docs/unified_computing/UCS/SW/GUI/config/Guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_1_chapter_01000.html

• Cisco UCS Manager does not discover C240 Server

  Hello, Cisco community!

  Currenlty UCS manager shows two interconnections of fabric and two extensions of fabric, but for some reason, my server isn't appear

  Birds seen are:

  I have my C240 connected with two 10GbE twinax cables, each going to a fabric Extender. (Total FEX 2)

  I have two 10GbE twinax cables connected each interconnections FEX fiber modulus in each tissue. (Total of 2 FI)

  The fabric interconnect ports L1 and L2 are connected to their corresponding ports. If their connected to each other.

  I run 'show cluster extended State' on the primary FI and this is what I get:

  FI - A # show cluster extended State

  The ID of the cluster: 0xebaad0e28ded11e3-0x86d4002a6a153d84

  Start time: Thu Feb 5 16:07:44 2014

  Last election period: Thu Feb 5 16:23:26 2014

  A: UPWARD ELEMENTARY SCHOOL

  B: UP, SUBORDINATE

  A: Member State UP, lead, State State PRIMARY, mgmt services: UP

  B: Member State UP, lead SUBORDINATES, mgmt services state: to the TOP

  State of PRIMARY_OK heartbeat

  INTERNAL NETWORK INTERFACES:

  eth1, up to

  eth2, up to

  HA IS NOT READY

  Any device attached to this fabric of interconnection

  After you set up server-side on each FI ports, the server still does not appear

  Any ideas are highly appreciated!

  -Alex

  Hi Miguel

  It seems to me, you're running a rather old version of UCS.

  In my screenshot you see the pool ext - mgt KVM on the LAN tab

  In an older version (I think< 2.1),="" this="" was="" under="" the="" admin="" tab.="" please="" have="" a="">

• SQL7.0 Enterprise Manager query cannot be executed because some files are missing or is not registered.

  Hello

  We have a VB 6.0 application and MS SQL 7.0 with windows XP operating system.
   
  We get the msg of error as shown below
  SQL7.0 Enterprise Manager query cannot be executed because some files are missing or is not registered.
   
  as well as when we give the impression of application (front-end server as VB 6.0) is not impression (from ast 2 weeks).
  previously, it works fine.
  But all other printed documents are works of MSword to Notepad etc...
  Please help me how to solve this problem.
  Thank you & best regards
  SURESH
    
    

     

  Hi Suresh,

  The issue of Windows XP, you have posted is related to Windows XP in a domain environment. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet forums for assistance.

  Hope the helps of information.

• Windows Movie Maker "the file is protected using digital rights management and cannot be imported."

  I downloaded a large .wmv file last night and have to divide into 8 smaller parts, but when I try to "import media" in Movie Maker is stipulates that "the file is protected using digital rights management and cannot be imported.

  Is it possible to import the file to edit?

  Turnbite removes the DRM http://download.cnet.com/Tunebite/3000-2140_4-10783040.html but I still don't know if it would work with Movie Maker (only because I haven't used products - looks like it would work, but I'm not sure).  Here is a review of version 6 (the current version is 7): http://mp3.about.com/od/audiotools/fr/Tunebite_6_Rev.htm.  Apparently, he's copying your DRM files and so it is required to have at least some degradation (but not a lot from what I've read - not noticeable).  Because it's free, it can't hurt to try it and see if it solves the problem.

  AVS looks like he got a number of good products http://www.avsmedia.com/, but I don't think that one of them address the DRM issue.  I really didn't listen to music or watch videos on my PC very often so I'm not familiar with the products to do such things.  May I suggest you post your question in the music and its Forum: http://social.answers.microsoft.com/Forums/en-US/vistamedia/threads , where issues of music specialists will be more than happy to help you with your questions.   Or in the photos and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where the video specialists will be happy to help with you project of filmmaking.

  As for Shane Childs, I suspect that Karthik copied an answer, he used for this person to respond to your question and everything just forgot to change the username - just a typing error.

  Good luck and I hope this helps. Lorien - a - MCSE/MCSA/network + / A +.

• cannot launch windows mobility Center help feature pop up

  cannot launch windows mobility Center help feature pop up

  Many thanks to you I found how do not so long ago but Bravo for your help.

• Integrating Active Directory and UCS Manager

  I'm looking to create an LDAP authentication provider in the UCS Manager that will authenticate users in Active Directory. I see the configuration guide UCS that a schema change is required to add a new attribute for user accounts and the guide details what the new attribute should be. However there are no detailed instructions on how to make the change to AD. I imagine some sort of import LDIFDE is required, but does anyone have more detailed steps on how to do it?

  Thank you

  You can ssh in your UCS, go to the NxOS prompt and test authentication as follows:

  Laurel - A (nxos) # test cpaggen aaa cisco group ldap
  the user has been authenticated
  Laurel - A (nxos) # test aaa group ldap cpaggen cisco1
  user authentication failed
  Laurel - A (nxos) # test aaa group ldap foo doesntexist
  user authentication failed
  Laurel-a. (nxos) #

  Make sure that this part of work. The role assignment comes from CiscoAVPair and the value must be a shell: roles = 'admin' If you want the user to be an administrator. CiscoAVPair must be an attribute of the user object. I've attached a screenshot of Wireshark for a successful authentication and authorization.

  You will also find the definition of the user and configuration of my UCS.

• UCS Manager &amp; Vmware

  Hi guys,.

  Before we set our Cisco UCS solution in we have Vmware running with Nexus 1000v switch. After the installation of the Cisco UCS solution, we migrated a lot off the coast of the old system to the new. By reading the manual on setting up vCenter, Port and VMS profiles in UCS Manager, it seems that this creates a new on the nexus 1000v vsm. Anyway is to import what we have so that we see in the UCS Manager?

  David, the functionality of the UCS you speak is known as VN-Link in the material while the Nexus 1000v is known as VN-link in the software. Installation and configuration is very similar to the Nexus 1000v but they are separated distributed virtual switches.

  Unfortunately, you can't use both because they require the VEM loaded on ESX hosts and the UCS VN-link requires a login policy dynamic UCS vNIC. If you use the 1000v, you will not be able to use the VM tab in UCSM and you will not see anything on the virtual computers tab on a Service profile.

  In my opinion the Nexus 1000v is preferable because is offer more features, more scalable and is managed/set NX - OS. Of the UCS VN-link option also limits the number of virtual machines, you can run on a host computer, because the dynamic vNIC takes in charge a maximum of 56 depending on how rising your chassis to your FIs. If you have only 2 uplinks of your chassis then the max machines virtual host when using the UCS VN-Link is 20-24, according to the number of vNIC ESX host, you create as part of your Service profile.

• UCS Manager 2.0 (1W) read only role grayed out

  Hi, I want to create a user authenticated locally in UCS Manager with read-only permissions, but when I go to add the role of read-only user is not available for selection (it is grayed out). No idea how to solve this problem and make the read-only role available for selection? Screenshot attached. Thank you.

  It is activated by default.

  Don't assign it not all roles to your new user and they will automatically get the read-only.

  Kind regards

  Robert

• XenServer on UCS Manager 2.1

  Hello

  According to the compatibility matrix, XenServer is not supported on the blades of the UCS in UCS Manager 2.1...

  I wonder if that is a documentation error, or simply true...

  In case this is the last... How is that possible?

  Thank you

  He has not qualified yet, but it should be in the near future.

  Robert

• UCS Manager release Upgrade Advisor

  Hello

  We have a UCS with UCS Manager 2.0 infrastructure (3) output and vSphere 4.1.

  Now, we would like to improve our infrastructure to vSphere to version 5.1. Taking into account the fact that 2.0 (3) UCS Manager does not support vSphere 5.1, is it interesting in the UCS Manager upgrade to 2.0 (4) or 2.0 (5) compared to upgrade to the latest version 2.1 (1)? I think the stability, or maybe other reasons...?

  Thank you

  Yes - all build train which is more mature (ie. more frequently patched) must inheritly be more stable.  When you introduce new features, as there are a lot of difficulties in the case of 2.1 added after that we discover strange things visitors try to do with the product.  It is impossible to QA a product for each customer & deployment disparity.

  If you don't need the new features, specific HW or SW OS supports, then stay with the current 2.0 train.  It's just more mature than 2.1.  We should have our first 2.1 patch temporarily to come in a few months.  At that point I would start to promote the 2.1 as being the more stable & recommended version.

  Kind regards

  Robert

• installation document ucs Manager

  someone can tell us where ucs manager is executed or can antbody can tell us where we can find a facility for ucs document manager with c-series single pedestal.

  Thanks in advance

  Erick,

  I think you are talking about two different things.  UCS Manager is for blades of series B and C-Series, which are built/managed by UCSM.  Stand-alone C-series is no manager of UCS.  Each C-Series is managed independently by the MMIC (Cisco integrated management controller).

  Kind regards

  Robert