Udated Video Driver, now can NOT START

Similar Questions

• I just upgraded to Safari 10 and now can not watch videos on youtube

  I just upgraded to Safari 10 and now can not watch videos on youtube

  If the videos require Flash, you can copy the Chrome URL and watch videos. Chrome has a built in flash player.

• I had an old iMac and had 2 external drives attached to it.  I got a new iMac and now can not plug old external drives were firewire 400

  I had an old iMac and had 2 external drives attached to it.  I got a new iMac and now can not plug old external drives were firewire 400 how can I hook up t he old external hard drives?

  You need a FireWire 400 adapter FireWire 800 and one FireWire 800 adapter Thunderbolt.

  (141473)

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• Computer failure, hard drive readable: can not find the 5 Lightroom Catalog.

  Computer failure, hard drive readable: can not find the 5 Lightroom Catalog. Help appreciated.

  I used 5.3 LR on Win7, never pay attention in the name of the catalog used. My photo files were on the same physical hard disk D: partition.

  Now that I have a new computer Intel NUC, with Win7 installed on drive C: (SSD M.2), I plugged my old drive hard drive E: (old C :) and drive F (old d :))

  I have re-installed LR 5.3 and also upgraded to LR 6, , but the problem is that I can't find the catalog I was using with LR 5.3

  I searched for *.lrcat and see all previous catalogues lightroom starting with LR 2, 3, 4, 5, getting bigger and bigger, but not catalog 5 including the current date.

  The catalog would have another name or extension?

  I have the old C: drive. Is there a config file that would confirm where the catalogue is supposed to be?

  Help!

  HM, it is clear that it is not found on your old C: (so E :). )

  And there is no config file to tell where to find the catalog to Lightroom. It's just that the catalog is in the place you choose (most of the people chose to have the catalog to the location by default...).

• Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running.

  Somewhere, I messed up my permissions, turn off the computer to see if it helped, now will not start at all. The start bar stops a quarter turn along. I tried in SafeMode as well do. I ' on a Yosemite iMac running. I can't enter to give more details. Can anyone help? There are a load of work due to deliver to the printing press Monday

  Have you tried to boot from the Partition Recovery and repair then the disc from there, using disk utility?

• can not start any other os that mac os install dvd

  I can not start any version of windows or ubuntu on my mac pro 1.1.

  Tried:

  Windows 98

  Windows 2000 Professional

  Windows 2008 Server

  Windows XP home

  versions of Windows 7 Professional 32 & 64

  Ubuntu 10.04 lts 32-bit

  Ubuntu 14.04 32-bit and 64-bit

  most will show a cd when you hold down the ALT to start up

  and those that I could start supposibly to give me a symbol of apple in alternation with the no symbol.

  searching the Internet, it seems many people have this problem.

  Details of my machine:

  Model name: Mac Pro

  Model identifier: MacPro1, 1

  Name of the processor: Dual-Core Intel Xeon

  Processor speed: 3 GHz

  Number of processors: 2

  Total number of Cores: 4

  L2 Cache (per CPU): 4 MB

  Memory: 16 GB

  Bus speed: 1.33 GHz

  Boot ROM version: MP11.005D.B00

  Version of the SCM (System): 1.7f10

  Chipset model: NVIDIA GeForce 7300 GT

  Type: GPU

  Bus: PCIe

  Slot: Slot-1

  The PCIe track width: x 16

  VRAM (Total): 256 MB

  Provider: NVIDIA (0x10de)

  Device ID: 0 x 0393

  Revision ID: 0x00a1

  ROM revision: 3011

  
  

  The system version: Mac OS X 10.7.5 (11 G 63)

  Kernel version: Darwin 11.4.2

  Boot volume: OSX

  Boot Mode: Normal

  Ensure the virtual memory: enabled

  64-bit kernel and Extensions: No.

  We window directly on the hardware, you must install via Boot Camp

  http://www.Apple.com/support/Bootcamp/

  a 64 bit OS will not work unless you use an add-on as the EFI on 2006-2007 Mac Pros is only 32-bit.

  The CD of Ubuntu 64 regular bits have to begin on older Intel Mac, as MacPro1, 1, because of incompatibilities EFI. You must download a special + mac CD of Ubuntu to work around this problem. To 11.04, you can get it here:http://cdimage.ubuntu.com/releases/11.04/release/

  http://Forum.Netkas.org/index.php?topic=1123.90

  Also:

  https://help.Ubuntu.com/community/MacPro

  http://AskUbuntu.com/questions/507354/how-to-install-Ubuntu-14-04-on-my-Mac-Pro-1-1-with-a-raw-hard-drive-by-a-bootabl

• drive Windows does not start a cd or dvd. it keep said to incert cd after I insert it

  drive Windows does not start a cd or dvd.  it keep said to incert cd after I insert it.  It can not read the cd or the dvd to start.  I rip, but it tells me to put it on cd.  I made a full recovery but still does not.  I have a Lenovo all-in

  Hi Kenneth,

  1. are you able to read files with another player?

  2 have you made changes to your computer recently?

  3. from when are you facing this problem?

  4. what operating system is installed on the computer?

  I suggest you follow the method and check if it helps.

  Follow the link and check if that helps.

  Your CD or DVD drive cannot read or write media

• Update Windows xp caused my computer blue screen and now will not start.

  Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

  It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

  Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

  Ben River

  I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

  If nothing else works, try reinstalling your operating system. It worked for me.

• Vista 64 return failure - now will not start

  For about a week, my system would auto-update and rebooted... but Windows Explorer could not function if I would return to a previous state. But this morning when I tried to return it never completed.  After more than an hour, I have concluded that he had failed and attempted to restart. No luck. Now, does not start. I don't have a recovery disc, so decided to upgrade... bought Windows 7 (64 bit), but before I installed it, I read that I'll lose data (Outlook, etc) and need to reconfigure/reinstall all software.  No there is no way of starting from a generic, temporary operating system and then ask him to come back at a time where my original OS worked well?  I would then be the transition to Windows 7 the simple and smooth way, keep all the settings program and data, etc.

  Furthermore, I read emails via webmail from verizon on another pc, without going through Outlook.

  UPDATE: sorry to take so long... I decided to bite the bullet and install the new operating system (also changed for Windows 7-64), and then reinstall all the software and settings.  In it, I bought an SSD for C: and moved the boot drive initial one of the removable slots, allowing to recover all Outlook email and folders, files etc.  Overall, it was a major event, but now that it's over I'm pleased with the results.  Thanks for all the help and suggestions.

• Vista: The device can not start (error Code 10) for a USB CDC device which works fine in XP

  I have a USB device 2.0 DCC which works very well under all of our Windows XP machines, but not based on Vista.  The device uses the usbser.sys driver and emulation of the virtual Comm Port.

  The text of the listing shows the same information on Xp and Vista, except under vista it shows no open pipes.  Shows Device Manager: device can not start (error Code 10).

  Using Vista I can't connect to the vista of CDC through concentrators or device to any other device wireless hub except for a Dlink Wireless hub, which has a layer of software between the CDC device and the PC.  With Xp, it all works very well on more than one PC, with Vista, there are questions.  I use the INF manufacturer provided for Vista, still no results.

  Any ideas on this would be greatly appreciated.

  Hi NuWaveDC,

  Thank you for taking the time to post on the Microsoft answers Forums.

  Please see the following article for an explanation of this error code 10.

  Explanation of error codes generated by Device Manager

  http://support.Microsoft.com/kb/310123

  Follow the steps listed for the error Code 10 see if this helps solve your problem or not.

  Please post back to let us know if this information was useful or not, so that we can help you if need be.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get an error message: The Nvidia OpenGL driver lost connection with the display driver and can not continue. Error code 8

  When I play the virtual Interactiver - Second Life Community. The screen turns white and windows tells me the display adapter stopped responding and has recovered. While the second life Viewer is still Virgin (white). I get the error in a box: The Nvidia OpenGL driver lost connection with the display driver and can not continue. The application must close. Please visit http://www.nvidia.com/page/support.html for help. Error code 8. Now, I worked with Nvidia to do a clean install of the latest version of the driver. a driver in safe mode installation. They suggested to try an earlier version of the driver. Nothing that they worked me and told me to see Microsoft. The pilot hangs every 30 min or so, all online in the second game of life. Can someone help me?

  Information System
  ------------------
  Time of this report: 13/06/2011, 19:40:20
  Machine name: BEN - PC
  Operating system: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.110408) - 1631
  Language: English (regional setting: English)
  System manufacturer: HP-Pavilion
  System model: GC670AA-ABA a6120n
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 Duo CPU E4400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 4096 MB RAM
  Available OS memory: 3582MB RAM
  Page file: 1690MB used, 5472 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  User DPI setting: 96 DPI (100%)
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  Two monitors

  Display devices
  ---------------
  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1600 x 900 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: G205H (Acer)

  Card name: NVIDIA GeForce 7600 GT
  Manufacturer: NVIDIA
  Track type: GeForce 7600 GT
  DAC type: Integrated RAMDAC
  The device key: Enum\PCI\VEN_10DE & DEV_0391 & SUBSYS_201F19F1 & REV_A1
  Memory display: 1768 MB
  Dedicated memory: 248 MB
  Shared memory: 1519 MB
  Current mode: 1280 x 1024 (32 bit) (60 Hz)
  Name of the monitor: generic PnP monitor
  Monitor model: NEC LCD7V

  Hello

  I suggest that you have watch the following link below:

  http://forums.developer.nvidia.com/index.php?showtopic=5331

  I hope this helps.

• Hello. Accidentally, I bought the Adobe Lightroom 6 box set (CD ROM) support when I need to download the application. I opened the package and now can not return it. Is there a way I can be provided with a license so that I can download the software and t

  Hello. Accidentally, I bought the Adobe Lightroom 6 box set (CD ROM) support when I need to download the application. I opened the package and now can not return it. Is there a way I can be provided with a license so that I can download the software and avoid paying twice for the product? I can return the package open, if necessary. He was ordered on Amazon.ca. Thank you

  Use the serial number located inside the retail box to save the download version

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a way to go to a page to download the Adobe programs if you do not have a disk or drive

• upgraded to adobe reader XI now can not see/open online documents, pdfs etc.

  upgraded to adobe reader XI now can not see/open online documents pdfs etc. even when I myself save them that they wont open after the download. can save in documents and open them to the document file.

  Try to open the drive by itself, and then disable the Protected Mode (Edit |) Preferences | (Advanced) security).

• in Firefox can not see the window of downloads, specialist of the jump in the trunk to be saw - the speed downloaded a lot and now can not see how to fix it?

  in Firefox can not see the downloads window, specialist of the jump in the trunk to see - the download speed
  Downloaded a lot and now can not see how to fix it?

  The download Panel has been moved to the upper right corner with a circle arrow down. You can also visit on: downloads of your browser to visit all your downloads.