UILoader jump location unspecified?

Similar Questions

• Lenovo G510 cmos jumper location

  Hello

  I have a problem, because I changed a few settings in my bios (on the Advanced Options tab), and now the computer starts, but no display at all since the beginning (computer is turned on, but it is everything, will not start the system or anything).
  Because of this problem, I need to locate the jumper cmos or something similar to reset the bios (I can't do this via recovery key because of the screen thingy, so I need for this equipment way). Can I please have info about this bios reset jumper location?
  My motherboard is viwgq/gs la - 9641p rev 1.0

  In the hope of answers.
  Have a nice day y ' All
  L.K.

  Unfortunately, he got solved by buying the new bios chip and replacing the old.

• HP Omni 120-1106er: HP Omni 120-1106er cmos bios Password Reset

  Hello

  How 2 reset password "bios cmos" on HP Omni 120-1106er desktop PC (all-in-one) Info

  I tried this

  "jumper located near the memory modules", not for the bios, I guess.

  jumper next to the batarey cmos have # on the pins.

  " "

  My MB pic1 pic2

  Reset the password on HP OMNI 120-1204er PC Aio by this method

  In the factory settings bracelet pins 2 & 4

  1 you need strapping pins 3 and 4
  2. turn on the unit
  3 close
  4. remove the jumper to pins 3 & 4

  5. replace pins 2 & 4
  6. turn on the unit and your password is deleted.

  10 x 2 http://h30434.www3.hp.com/t5/user/viewprofilepage/user-id/2510297

• HP 120 omni power ALL IN ONE on passworde

  Obtained and hp 120 omni all-in-one who came in a palette to mix all THE computers in ONE OFFICE, IN

  This one in particular has a POWER ON PASSWORD

  I figured out how to circumvent some of these passwords by getting an error code.

  the problem is that it does not give an error code, but a character (*)

  any suggestions help?

  I already tried to remove the jumpers and they are put back in place without success.

  ANY HELP WILL BE REALLY APPRECIATED

  Hello

  Whether you are able to remove the power on password, you must remove the back cover, and then remove the metal cover that protects the motherboard and remove the jumper located near the memory modules.

  Then try to turn on the system and see if that solved your problem.

  Thank you

• Place keyframes makes the playhead to jump to another location

  This nagging irritation has been with me for a long time. 35 to 50% of the time, when I place a keyframe on an element in the project timeline (using the little star in the Inspector), my head will jump to a completely random place. The keyframe appears usually there, but sometimes, it will be invisible when I press Ctrl V to expand. However, I can locate using the triangle next to the star in the Inspector. Someone please confirm this phenomenon. I'm the only person I know who knows this. As I said, he has been with me since the beginning. I wait for it to be fixed, but I'm starting to think that it will always be around when our sun goes supernova.

  This is a known bug that some users encounter.  Some saw that he solved in the latest version, but not all.  Should be fixed in the next update.

• Why I have problems with my cursor randomly jumps to a random location when entering?

  It's maddening. My cursor randomly jumps to a place randomly on Windows 7, whenever I type... I wind with locate in jumpted when my slot is no longer type my text, back out the junk in the place text at random, back to my slot and continue typing.

  This product CONSTANTLY all the 100 characters or so... and it's okay if it's Word, Notepad or a textbox on the form online.

  @Bill2010 only! =>

  Please report all further follow-up replies to your new thread in the forum of the Performance-online http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/cursor-spontaneously-jumping-to-random-text/2a986a8e-2d82-4c25-acf2-5f09233602c5

  TIP: If it's a laptop, be sure not accidentally brushing the touchpad with the fingers or inadvertently press the Ctrl, Alt and Fn keys you type.

• My VX-5000 WebCam is to jump and static. Can not locate the identification number

  I have WebCam VX-5000.   I works fine except it jumps and is static.  I was not able to get

  rid of the static method tried all suggestions on the Microsoft site.   I can't get an identification number to ask questions

  on the Microsoft site.

  Hello

  · With which application is the webcam to jump?

  · Do you remember all the recent changes on the computer before the show?

  · What is the service pack installed on the computer?

  You can see below, which contains information about how to contact Microsoft for unit material: http://www.microsoft.com/hardware/en-us/support/contact-us

• How to stop the slider to jump to a new location when the keyboard?

  As I type, the letters can appear at the beginning of a sentence or a paragraph which was completed OR in the middle of a Word.  I have no control, except to stop and reposition the cursor to continue my message.  It is important now that I'm in word or create a gmail message or a comment on Facebook.  Very annoying.  By writing this message, it behaved well; almost as if he's teasing me.  What a Rascal.

  I'll guess that you are using a laptop with a touchscreen mouse. Chances are you are brushing and causing your cursor jump. Try with an external keyboard and see if you still have the same problem. In some cases, you can go to control panel > mouse and check the settings to see if you can adjust the sensitivity to it.

  I hope this helps.

• How can I fix the problem with the cursior jump to a location unwanted when I type

  I am using windows 7 and the cursor will jump as I type and sometimes the page will be highlighted in blue as if I chose this. How can I fix this problem.  I had Dell representatives tell me that this is a problem in windows7.

  Looks more like a Dell driver problem

• Be able to jump up to a point located on an interactive PDF

  I want to be able to create a button in an interactive PDF and when you click on it it will go up to a point on a page. Not to a particular page, but a point on a page, a bit like an anchor point in the web. I tried to set a bookmark that I want and then using the button "go to destination", but need me only the top of the page, Special No. point.

  Thank you.

  Is not possible in a PDF file. You can go to a particular page, and you can adjust your view of the page. You cannot jump to a specific point in a page. That's all.

  Remember, that the PDF specification was created a long time ago and has no improvements new slick HTML/CSS/JavaScript for a few years.

• When ever I type text in the curusor anyprogram jumps to the location of the pointer and I find myself typing anywhere in my document.

  OK im typimeitmes jumo will slider autour, I ng this document and so

  I think it might have something to do with the mouse pad.

  Hello

  1 did you change on your computer?

  2. not this problem occurs only with the particular application or other applications?

  3. What is the brand and model of the computer and the mouse?

  4 are you using cable or wireless mouse?

  5. you are using laptop or desktop?

  Method 1:

  I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I suggest you to update the mouse drivers and check.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings

• Location of BIOS jumper battery, HP s5610f PC

  My PC HPs5610f did not have a signal (no video to monitor) at startup. I disassembled the PC to remove and replace the BIOS battery to attempt recovery. It worked. After a period of inactivity of several weeks, I once have now no signal on the screen when you attempt to start. Passing by the similar battery removal/replacement procedure may or may not succeed, but I guess that's. Why is that happen? is there a CMOS Jumber on this computer in order to avoid the complete disassembly to access the battery? Is there a replacement start-up procedure (for example, the keyboard entries) to clear the problem?

  Help me someone, HB

  Hello

  You will find the jumpers CMOS by the SATA ports on the motherboard.  See the image below.

  

• How can I jump off image Loader UI to a marked section of the main site?

  I got my layout of the entire site in Flash CS4 and using AS3. I'm new to Flash and managed to properly segment the site with labels, add UI Chargers to the sections you want to make the smallest site and work faster, I was able to put a close button above the charger of the UI, that closes and brings back a user to a designated section of the site.

  And then I encountered a problem. I have a few images in each AC charger that I would work like buttons and also to bring the user to the desired section on the main site, but it seems to be a problem that the buttons are located inside the IU charger I can't figure out how to jump out of the charger to the main site.

  Is there a specific code for it or the whole layout must be restructured in some way?

  That error looks like ended you up talking to the UILoader.  Try to add another parent in there.

• Has anyone found a fix for Airport Express music jump Apple?

  I searched for weeks for a solution to my intermittent gaps in music, aka jump. It's so frustrating. I really don't want to have to go to a wired solution. It will take too long and a cable unattractive in my rooms.

  I use the Bright House Networks 5 ghz Arris DG1670 router/modem that my provider rents for me.

  The router is less than 30 feet of my Airport express

  The airport express is on the ground, hooked by fiber TosLink Cable to my Focusrite Safire Pro 24.

  • Thinking that this could be a problem I have since turned sideways to try it as a cure for that surface in contact with the ground is less. The next step, I'll try is put on something instead of on the floor. But given the proximity is is not much of a problem anyway.

  I tried:

  • change the channel on my router from 11 to 40 to 47 to the automobile. They all jump.
  • I tried the 5 ghz and 2.4 ghz for connections.
  • Streaming of my Macbook Pro, streaming from my iPad 2 Air
  • Change the setting of joint A/N to N only (since the Express a N)
  • Activation and deactivation of WMM in the router configuration.
  • Pass bandwidth of 20/40 to 20 only and then back again to 20/40.
  • Change the interval of tag to 500 ms 100. (This allows supposedly with the flow and the battery life).

  All jumps. But after change the channel to a 44 superior to WMM and putting the Express with nothing around him to block the antenna inside, he seems to ignore a little less. It is likely that there are too many networks in my home nearby that are fighting in the spectra of bandwidth, but I hope someone may be able to offer something else.

  I suggest anyone with the same problems to try some of the "fixes" I tried above reading.

  Thank you.

  It may just be possible that you have a bad AirPort Express...

  I'm assuming that you have a 2nd generation 802.11n AirPort Express AND that you have configured to join the wireless network provided by your gateway Arris... correct?

  The router is less than 30 feet of my Airport express

  As you probably already know the AirPlay flow is from your MacBook Pro or iPad 2 Air to the Arris first, then, the Express. In theory, you should get the best streaming when all these devices are co-located. As you can imagine, if you take a camera from another room or floor, the stream will pass through a number of walls, floors, ceilings, etc., which will affect the overall available bandwidth.

  • Change the setting of joint A/N to N only (since the Express a N)

  Not quite correct. The Express supports modes radio 802.11a/b/g/n. 802. 11A only works on band 5 GHz. 802. 11 b or g only works on the 2.4 GHz band, and 802.11n can operate on either.

  • Activation and deactivation of WMM in the router configuration.

  AirPort base stations do not QoS support for this parameter shouldn't have any effect.

  • Pass bandwidth of 20/40 to 20 only and then back again to 20/40.

  This setting is usually only on the 2.4 GHz radio. All AirPort base stations do support 20 MHz channels across this tape. I suggest you leave this set to "20 option."

  and put the Express with nothing around him to block the antenna inside, he seems to ignore a little less.

  Most likely, it was the most effective solution. All wireless routers must be placed so that they are in a (possible) clear space for their antennas to be clear... especially of metal objects.

  It is likely that there are too many networks in my residence nearby which are fighting in the spectra of bandwidth...

  It is unfortunately a real problem... and maybe deserves to be studied more, if only to verify that it can be a cause. In an intense environment of Wi - Fi, most people will try to get the "best" of the performance of their network. This could mean, they have implemented their wireless routers to produce a network that can interfere with others without thinking.

  At best, you can try to change the channels that you already find one located on a less used channel... but without duplication of canals, including on the 2.4 GHz band are very limited. (1, 6 or 11 to the United States).

• iPad Mini location Service no longer works

  Last month, I've updated my Mini iPad for iOS 7.1 to 9.3.2 just to play PokeGO (the first time after 2 1/2 years of use without updating my iPad). After the update, the location of Services/GPS works fine on Apple and Google Maps maps with no signs of problems, I could even enter the game PokeGO (even if the game is buggy mess from the start).

  But one day when 9.3.3 update went live, he always ask me to update my iPad, but when I tried to open all cards, the location of GPS and Services no longer works. I tried to reset the router, turning the deactivation/activation of location Services, and then reset network settings and location on my iPad, but still not solved.

  And just recently I've updated my iPad to 9.3.4 because my theory is that the location/GPS will not work without having to install the last update, but I gave up that my iPad is already bricked because the location Services and applications required GPS are now rendered useless.

  Your iPad mini is a cell with GPS model if it is not the case, your location is only estimated from IP addresses and WiFi. That said, you should check the settings for applications, in order to ensure that access to the site is enabled. And if this is the case, turn it and turn it back on for each of them. You did such a big jump in versions of iOS it is difficult to know what security changes have been made. You should probably reconsider all your settings, as if it were a new configuration. Also, make sure that your applications are all updated.