Unable to access the configuration of the EA6900v1.1 web page
Hi guys,.
I bought a second hand ea6900, the guy had its ssid wifi in there, so I took over and reset immediately.
to reset that, I like the reset button, waited for the flash logo and then become solid.
I can connect to it wired and wireless, however, when I type in 192.168.1.1. He takes me to smart wifi configuration page, that requires the internet connection or the router access password, I tried admin, password, empty, etc. non of them work.
I plugged a cable to the internet port of my router/box of fiber, and it does not connect to the internet either.
I also tried to update the firmware, http://www.linksys.com/us/support-article?articleNum=159332
using the management http://www.linksys.com/nz/support-article?articleNum=140001 mode
or TFTP method http://www.linksys.com/nz/support-article?articleNum=137928
the two did not work, he brings me to the page of the wifi chip, when I tried to access the management mode,
and it's the same thing when I press reset for a minute. always take back me to the wifi secruit and need this password.
These items are Linksys live chat, after they discovered that his warranty has expired
anyone would be able to help?
Thank you
Adam
OK... This is simply ridiculous. I use IE to connect with admin, chrome does simply not work.
Tags: Linksys Routers
Similar Questions
-
Unable to open the links on Web pages.
I use a computer dv6-3025dx laptop with Win7 64 bit. "When you try to open the links on Web pages, it opens a new tab and say" connection "but everything goes ever further. In this case with most sites, even trusted sites. There are some who do, it is may be a parameter that HP put in place. My neighbor has the same problem on a HP laptop.
Hello
Try to download and install Firefox and see if you still have the same problem with opening of Web links.
Kind regards
DP - K
-
Unable to access the Windows Update Web site.
When you try to access the Microsoft Windows Update site, the following occurs. the Web page that says "checking to see if you have the latest version of..." "is displayed briefly. It is immediately replaced by a page of information. This has "[error number: 0x800A0005] the website has encountered a problem and cannot display the page you are trying to display." The options provided below may help you solve the problem,"with the other possibilities in clickable (I went through them but nothing helped...
I tried Microsoft FixIt Center, but all she could do is to tell me that "necessary attachment components" but not which.
I also tried to reset Windows Update components according to the instructions on "http://support.microsoft.com/kb/971058".. .no luck.
I am running XPPro SP3 IE8.
Symantec Endpoint Protection version 11.0.7101.1056.
Any help much appreciated.
Hello
Perform the steps mentioned below and check if that helps:
Method 1
Check if the Windows Update Service is selected as a starting point.
To do this, follow these steps:
1. on Start, run and type services.msc in the Open box, and then click OK.
In services.msc find the automatic updates service and double-click it.
1. click on the tab log and ensure that the "Local System account" is selected for the account logon and the box "Allow service to interact with desktop" is DISABLED.
2. in the hardware profile sectionin the log tab, check that the service is activated.
3. on the general tab, the Startup Type should be Automatic, otherwise, the drop-down list box and select automatic.
4. under "Status of Service" under the general tab, the service must be started, click the Start button enable.Repeat the above steps for the service "BITS Background Intelligent Transfer Service ()".
Method 2:
You can also re - register dll in Windows Update.
To do this, follow these steps:
1. Start, run, type CMD and click ok
2. in the black command window, type the following command and press enterREGSVR32 WUAPI. DLL
Wait until you receive the "DllRegisterServer in WUAPI. DLL succeeded"message and click OK."
* Repeat the same step for each of the following commands:
REGSVR32 WUAUENG. DLL
REGSVR32 WUAUENG1. DLL
REGSVR32 ATL. DLL
REGSVR32 WUCLTUI. DLL
REGSVR32 STINKS. DLL
REGSVR32 WUPS2. DLL
REGSVR32 WUWEB. DLLMethod 3:
Delete the corrupted Windows Update files. To do this, follow these steps:
a. at the command prompt, type the following command and press enter
net stop WuAuServ
b. at the command prompt,
type cd %windir% , and then press enter
c. in the opened folder, type the following command and press ENTER to rename the Software Distribution folder
Ren C:\Windows\SoftwareDistribution SD_OLD
d. restart the Windows Update Service by typing the following at the command prompt
net start WuAuServ
Type Exit and press ENTER to close the command prompt.
e. restart the computer and check if you have a similar question.
For reference:You can access the event viewer on your computer and check the newspaper of windows for messages/error codes important related to the question and after return from errors in the event viewer.
See the link below for more details:
What are the information contained in the logs of the event (Event Viewer)?
http://support.Microsoft.com/kb/308427
Let us know if it helps.
-
Cannot access the Microsoft Updates Web pages
using XP Home Edition on a laptop. Victim of a crisis (virus/trojan/worm - don't know what) in the new year, she launched the system restore and all of the restored data. Downloaded AVG to analyse the system, checked MS Security Center and I saw it worked not - says, he had been arrested. Much research for corrections, tried several of them, including uninstall AVG and other scanners, antivirus, installation SP 3 and MS Security Essentials and all other MS security downloads I could find. Still no access pages of MS update, always "THIS webpage IS NOT AVAILABLE". Also downloaded mpam - fe.exe and MPAs - fe.exe but does not - get access denied when select current to run user. How can I get updates MS if I can't access Web pages? I don't know what updates I've missed.
Mosty likely, the computer can be infected by ROOTKITS.
Try TDSSKILLER to find rootkits.
Download and run from here
http://support.Kaspersky.com/downloads/utils/TDSSKiller.exe>
-
Unable to get the Auto Refresh Web page in Windows XP. It works on my laptop.
original title: refresh automaticallyOn the page of the PGA Tour ranking on my desktop, I can't the page to refresh automatically. It refreshes automatically on my laptop. I use Windows XP on both platforms, so that tells me that this is not the page of the PGA Tour, rather something in my settings on my desk. Can anyone help?
Hello
· What browser are you using and what version?
I suggest you to check in no add mode if the problem persists. Follow the steps mentioned in the link mentioned below.
Internet Explorer does not start or stops responding
-
Hello. I have download Adobe Acrobat Pro DC, after loading it is a window that is unable to access the Internet or is configured incorrectly. Tried to change the time and the Internet works fine. What can we do?
Log, activation, or connection errors. CS5.5 and later, Acrobat DC
https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-
remote VPN and vpn site to site vpn remote users unable to access the local network
As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config
The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.
ASA Version 8.2 (2)
!
host name
domain kunchevrolet
activate r8xwsBuKsSP7kABz encrypted password
r8xwsBuKsSP7kABz encrypted passwd
names of
!
interface Ethernet0/0
nameif outside
security-level 0
PPPoE client vpdn group dataone
IP address pppoe
!
interface Ethernet0/1
nameif inside
security-level 50
IP 192.168.215.2 255.255.255.0
!
interface Ethernet0/2
nameif Internet
security-level 0
IP address dhcp setroute
!
interface Ethernet0/3
Shutdown
No nameif
no level of security
no ip address
!
interface Management0/0
Shutdown
No nameif
no level of security
no ip address
management only
!
passive FTP mode
clock timezone IST 5 30
DNS server-group DefaultDNS
domain kunchevrolet
permit same-security-traffic intra-interface
object-group network GM-DC-VPN-Gateway
object-group, net-LAN
access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
MTU 1500 Internet
IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
ICMP unreachable rate-limit 1 burst-size 1
enable ASDM history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 1 0.0.0.0 0.0.0.0
Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-registration DfltAccessPolicy
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
AAA authentication http LOCAL console
AAA authentication enable LOCAL console
LOCAL AAA authentication serial console
Enable http server
x.x.x.x 255.255.255.252 out http
http 192.168.215.0 255.255.255.252 inside
http 192.168.215.0 255.255.255.0 inside
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto-map dynamic dynmap 65500 transform-set RIGHT
card crypto 10 VPN ipsec-isakmp dynamic dynmap
card crypto VPN outside interface
card crypto 10 ASA-01 set peer 221.135.138.130
card crypto 10 ASA - 01 the transform-set RIGHT value
crypto ISAKMP allow outside
crypto ISAKMP policy 10
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 65535
preshared authentication
the Encryption
sha hash
Group 2
lifetime 28800
Telnet 192.168.215.0 255.255.255.0 inside
Telnet timeout 5
SSH 0.0.0.0 0.0.0.0 outdoors
SSH timeout 5
Console timeout 0
management-access inside
VPDN group dataone request dialout pppoe
VPDN group dataone localname bb4027654187_scdrid
VPDN group dataone ppp authentication chap
VPDN username bb4027654187_scdrid password * local store
interface for identifying DHCP-client Internet customer
dhcpd dns 218.248.255.141 218.248.245.1
!
dhcpd address 192.168.215.11 - 192.168.215.254 inside
dhcpd allow inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
Des-sha1 encryption SSL
WebVPN
allow outside
tunnel-group-list activate
internal kun group policy
kun group policy attributes
VPN - connections 8
Protocol-tunnel-VPN IPSec
Split-tunnel-policy tunnelspecified
Split-tunnel-network-list value split tunnel
kunchevrolet value by default-field
test P4ttSyrm33SV8TYp encrypted password username
username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
username kunauto attributes
Strategy Group-VPN-kun
Protocol-tunnel-VPN IPSec
tunnel-group vpngroup type remote access
tunnel-group vpngroup General attributes
address pool VPN_Users
Group Policy - by default-kun
tunnel-group vpngroup webvpn-attributes
the vpngroup group alias activation
vpngroup group tunnel ipsec-attributes
pre-shared key *.
type tunnel-group test remote access
tunnel-group x.x.x.x type ipsec-l2l
tunnel-group ipsec-attributes x.x.x.x
pre-shared key *.
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
Review the ip options
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the icmp
!
global service-policy global_policy
context of prompt hostname
call-home
Profile of CiscoTAC-1
no active account
http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
email address of destination [email protected] / * /
destination-mode http transport
Subscribe to alert-group diagnosis
Subscribe to alert-group environment
Subscribe to alert-group monthly periodic inventory
monthly periodicals to subscribe to alert-group configuration
daily periodic subscribe to alert-group telemetry
Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
: end
kunauto #.Hello
Looking at the configuration, there is an access list this nat exemption: -.
192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
But it is not applied in the States of nat.
Send the following command to the nat exemption to apply: -.
NAT (inside) 0 access-list sheep
Kind regards
Dinesh Moudgil
P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community
-
Firefox is unable to access the internet
Hello
Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages appear. The strange thing is that Firefox Sync seems to be able to connect to the server, and I can download plugins.
Best regards
Joel HedestigYou can try using the beta version of firefox mobile?
https://play.Google.com/store/apps/details?ID=org.Mozilla.firefox_beta
-
MY mail server hardisk full so cannot start services & also unable to access the mail server
I have the server messaging, but Hardisk ful then failed to start Services and also unable to access the e-mail mail server troubleshooting steps.
Hello
The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions. I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago. Can anyone help?
Assume that:
http://support.Microsoft.com/kb/316524
You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site
http://support.Microsoft.com/kb/189126
Microsoft's strategy concerning lost or forgotten passwords
What I can offer: http://support.microsoft.com/kb/321305
How to connect to your Windows XP-based computer if you forget your password or if your password expires
-
I'm unable to access the internet with my CV due to the reception of the following - xp Antispyware 2011 alert. How can it be deleted? I have McAfee Total Protection Plus, but which apparently does not work. Help, please.
This problem existed for about a week.Hello
· What is the exact error that you are experiencing?
· How long have you been faced with this problem?
· Remember to make changes to the system?
It seems that your system is infected by a virus or malware. I suggest you to run a scan on the system online to make sure that your system is free from viruses and malware. Click on the link below.
http://OneCare.live.com/site/en-us/default.htm
Also, I suggest you to download and install Microsoft Security Essentials on the system. Click on the link below.
Microsoft Security Essentials
http://www.Microsoft.com/security_essentials/
I suggest install Malicious Software Removal Tool from the link below and then install it on the system and are looking for malware.
Malicious software removal tool
http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx
-
After I 'google' a web site address, I am unable to access the page directly by clicking on the link in the address; the page hangs and does not respond.
What antivirus you have installed before? Is the virus/malware-free system? If you have a current antivirus installed and you went through at least some of the malware removal steps I list in the link I have given if you are sure that the system is clean, uninstall McAfee and see if that solves your problem. If you connect to the Internet behind a router, you can be sure for this quick test. If you are connected directly to a cable/dsl modem, then firstly download Avast or even Microsoft Security Essentials (both free). Then, disconnect from the Internet and uninstall McAfee. Install the antivirus of your choice and test. If all goes well, your problems have been caused by McAfee. This is not surprising since McAfee is perhaps the worst choice for safety, we could do.
If you had any antivirus installed before McAfee, then you must go through all stages of thorough removal of malware listed in the my link before anything else. MS - MVP - Elephant Boy computers - don't panic!
-
We have a Nextbook but are unable to access the Internet at home
We have a Nextbook but are unable to access the Internet at home, even if we have a laptop and PC. How to solve this problem? Thank you.
Hi Vernon,
1. you are trying to connect the Nextbook to wireless (Wi - fi) network in your home?
It is a tablet based on Google's Android. As it comes to one product other than Microsoft, I suggest that get you in touch with the manufacturer about this issue. You can contact them at the following link:
http://www.nextbookusa.com/techsupport.php
Hope this information is useful.
-
I'm unable to access the Web site rewards club mail
I'm unable to access the Daily Mail online REWARDS CLUB site WEB TO ENTER MY NUMBER ONE
Hi BrianSheridan,
1. what happens when you try to connect to the site?
2. you receive an error message?
3. what web browser do you use?
4. what version of IE are you using?
5. are you able to open the Web site in the other computer?
If you use Internet Explorer, then perform the following troubleshooting methods:
Method 1:
Optimize Internet Explorer, and then check how it works.
Check out the following link to optimize Internet Explorer.
How to optimize Internet Explorer
Note: This article is also applicable to Internet Explorer 9.
Method 2:
Also perform the following troubleshooting steps.
Can't access some Web sites in Internet Explorer
Method 3:
If you use Internet Explorer 9, then perform the steps in troubleshooting at the following link.
Some sites Web may not behave as expected in Internet Explorer
-
Unable to access the network using Edimax N300 universal Wi - Fi extender
Original title: Edimax Extender will not get internet access
I naoual got a N300 Eimax universal Wi - Fi extender but I am unable to connect to the internet. They suggest setting up near the wi - fi access point to get the signal stronger and I got to show connected in the window ' currently logged in ', but it does not connect to the network. EDIMAX has proposed upgrading the firmware, but I was unable to get any joy with that either. Anyone with any ideas would be appreciated.
Hi Gofchap,
Thanks for the question of validation in Microsoft answers community!
I imagine the frustration you feel when you are unable to access the network.
The problem may be because of the Extender, diverter, or with the network adapter.
1 did you do changes on the computer before the show?
2. do you receive any error messages?
3. What is brand and model computer?
4. have you tried to connect without using the extender?
I suggest you to visit:
Wireless and wired network problems
I hope this helps. If the problem persists, let know us and we would be happy to help you.
Maybe you are looking for
-
How to select all the other files in a folder?
I have the folder with 1200 jpg - each 1 a 24 fps movie image. I want to select other images to import in my animation program manager (so my film output will be 12 fps) How easily - without having to buy an app - select all OTHER files in the folder
-
Keyboard does not work on my old Pro of Satellite 420
I know, it's a very old book, but I have a big problem, maybe someone of you can help me. I bought the laptop only for wrighting reports. But the main problem is, when I try to write for example after the sentence: I had a lot information on... the f
-
C6280 will not SCAN when it is set at 14 Touchsmart sleekbook running windows 8 (have not improved to 8.1). Old printer 4480 combo scans very well with the sleekbook.
-
8 GB or 4 GB max? (HP G62-a15SA)
Just had an email from Crucial by saying that my phone can take up to 8 GB of memory! Upgrade to 8 GB? But the HP site says 4 GB: HP G62-a15SA Really confused by there!
-
Error1722 problem with the windows package install.
I try to install the Cisco VPN software and I get error 1722. Says that there is a problem with the windows package install. How can I fix it?