Unable to complete virus scanning - unexpected errors

Similar Questions

• Transcend Jet 360 Lite SD care & "the operation cannot be completed because an unexpected error occurred (error code - 50)"

  Have used the SD Transcend 360 256 MB card for data storage with success during the last 6 months on my MBP to mid-2014.  Installed their wake from sleep early support software.

  Above error code invite you in this context: I wake up Mac in the morning after sleep.  Transcend icon "wake up" and appear on the desktop (as it should).  I check disk utility and the card is recognized.  HOWEVER, about 1/3 of those mornings, despite appearing and functional map icon (folder open when I click on it), when I try to write/copy a file or folder to it, I get the above error code?  For about a week I missed that everything seemed normal.  My current 'fix' is to eject the card (requires a 'forced ejection"which I'm concerned could damage the card?), but the card ejects without delay.  90% of the time when I remove and reinsert the card, the operating system recognizes, all right.  (There are a dozen times when I had to reboot for it to be recognized.)

  All the others did this experiment with the Transcend (I submitted a request for tech support to them with a persistent response of 'Question Mac'... (LOL).  This error has been noted several times on the Forum discussion, but in the context of external drives and with no apparent solution.  FYI, I use the Transcend (in addition to external systems) b/c it works essentially like a hard drive internal and I use it mainly for Google Drive perfectly... except for the above inconveniences.  Thanks in advance!

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Duplex charger HP 8620 document Mac error - 'the scanner could not complete the scan.

  Hello

  When the analysis attempted double helped since the document feeder, I get the following error:

  the scanner was unable to complete the scan

  If I don't select duplex option, the printer scans very well. I really need the duplex feature was that the printer was purchased for.

  I uninstalled the printer, reset and all that gubbins.

  my setup is the following, configure the printer as wireless on mac osx mavericks last generation last drivers/HP utility. Ipgraded for the latest firmware of the printer also. all without success, and now support is not open until Monday

  For more information on this...

  So I think that I managed to fix it. Different solutions etc. then forums all about I thought I would include it here. This is the steps that I found to work for Mac OS x 10.9.

  I need to follow the steps:

  1. Remove the power cable while the printer is turned on wait about 15 seconds and plug it in again.
  2. When the installation of the printer using the selection HP not the Airprint, which is added by default on Mac OS x 10.9 - capture screen attached and operating.

     

     If everything is working great and then if not go to step 3.

  3. If the printer is already installed with AirPrint go to the printer main & scanners, right click in the box on the left where you printer is displayed and click on reset printing system. -This will remove all printers found here also.
  4. Download of the latest version of the software for your operating system
  5. Install the software, restart the computer.
  6. Download the latest firmware, if it is available for your printer
  7. Add your printer and follow the steps 1 & 2. It should work and allows you to copy double-sided.

  Don't know if this is a limitation of the software or drivers but ADF allows up to 300 dpi, as the manual scanner allows all the way up to 1200 dpi.

  See you soon

  Ed

• Help! Computer hangs during attempts to complete or defragmentation (MS) (MSE) virus scan or CHKDSK C: /f

  Help, please!  My computer freezes whenever I try to run a full scan or use the MS defrag it came with.  I have an important job who needs to back up, but I'm afraid that I shouldn't be where it is a virus.  I would really appreciate the help.

  Details:

  Windows XP Home Edition
  Microsoft Windows
  Version 5.1 (... Service Pack 3)

  Current system:
  Microsoft Windows XP
  Home Edition
  Version 2002
  Service Pack 3

  Fujitsu Siemens Computers
  Intel (r) Core (TM) 2 CPU
  T7200 @ 2.00 GB of RAM

  Info of current Disk Defragmenter:
  C: NTFS 112 free capacity space 47 GB space 43%
  (Was only 15% of free space at the beginning of the problems, before I removed or reduced the old files)

  Antivirus:
  Originally from Norton 2006, now uninstalled and replaced with the current Microsoft Security Essentials

  Browser: firefox version 3.5.9 (IE too but do not use)

  The story so far:

  FIRST PROBLEM: ACCIDENTS CAUSING SLEEP/HIBERNATE / SCREENSAVER?
  I am back from vacation and turned on my computer.  Soon, he wanted to upgrade me to the latest Firefox (must have been 3.6?).  He may have also updated my windows automatically.  Then whenever the standby/hibernation/standby screen came (not sure what was the culprit), the computer would crash - I would just get a gray screen when I tried to find by moving the mouse.

  'SOLVED' BY:
  I restored the system to a few points saved from before I agreed to install the new firefox.  I also stopped the computer goes on standby or into hibernation.  I couldn't work on how to disable the screen saver.  Standby/hibernation/standby order screen blocks the computer after that, and I took care not to upgrade to firefox 3.6, once again just in case, stay with the version that I was on, but continued to accept upgrades (now on 3.5.9).  I have always been accepting the automatic updates of windows however, because I was told that I should do.

  UNRESOLVED ISSUE: ANTI-VIRUS AND DEFRAGMENTATION DOWN EACH RUN
  So, I now had a more usable computer.  I tried to check virus, but the virus check (Norton, 2006) would be broken whenever I tried to do a full audit.  I analyzed in the MS Defrag tool that came with my computer and I saw that I had 15% free space, so I tried to Defrag.  Defragmentation has also crushed every time, usually at 3%.

  26 January:
  CRASHED ON THESE FILES:
  -Defrag crashed on A0044502.rbf
  -(J'ai remarqué que le nom était semblable à celle de la vérification de virus s'est écrasée avant)
  -Defrag then crashed over the other in a different file type, but I didn't note it (tmp.edb?)
  -Defrag crashed on C:/System volume information/_RESTO~1/RP320/A0045026.rbf (I think that virus check then crashed on this one too)
  -virus scan crashed on A0045030.rbf

  I ran cmd chkdsk_/f, as told to a friend.  He made 3 times and the screen went too fast to see writes said before he started.

  -defragged once again, it crashed on A0045107.rbf

  CLEANUP TO FREE UP SPACE FOR SPRING:
  I then had the end of emergency work, so did not have to try to solve this problem for weeks.  I just don't have the virus scan and did not try to defragment, therefore had no crashes.  When I had spare time, I went through removing unnecessary programs, deleting unnecessary files of old works and by reducing the great graphics work at smaller sizes.  At the time I had finished my rush job and could return to the problem, I got 43% free space.

  Wednesday, April 8:
  BACK TO ATTEMPTS TO SOLVE THE PROBLEM:
  -J' uninstalled Norton 2006 and then installed Microsoft Security Essentials to see if it would take viruses.  QuickScan revealed no.  Full analysis has crashed every time unfortunately.
  9 April:
  -CHKDSK C: /f or crashed was working incredibly slow (1/2 hour on the same file) both times I tried to do.  Both times it crashed on 66% to check the data of the file (4 of 5)
  SFC - typed term: the black box will Flash up but then disappears so fast, you can hardly see.  Nothing else happens.  I tried several times.
  -J' restarted the computer in "safe mode with command prompt" and tried SFC/scannow and got the following error:
  "Windows file protection could not initialize a scan of protected system files.
  The specific error code is 0x000006ba [the RPC server is unavailable]. »
  -J' rebooted 'safe mode' and typed SFC term.  Same thing happened as has happened before in the windows.
  -J' rebooted 'safe mode' and tried a full analysis of the MSE virus.  After an hour of working, it crashed in this file: C:/System Volume Information/_restore{5C5FC002-5FB5-4560-96DA-E32D8569FB2E}/RP320/A0045038.rbf.  This happened just after I clicked on a tiny with my notes Notepad document, although I don't know if that's what he did or has not already been blocked.  I managed to take a break and he reactivated just before it crashed.  The complete virus check was almost over, guessing 80% to the green bar.
  -J' tried to Defrag in 'safe mode', which soon crushed on C:... A0070595. MSI
  All these accidents April just cause the screen appearing to freeze because the virus check or defrag did not move from the file it says that it was on... then when I would try to stop it, the screen completely freezes so I have to manually shut down.

  Please help me solve this problem!  Should I save my work?  If I back up and there is a virus, then my backup external hard drive could be infected.  But if I do not support, I could lose a lot of work.

  Thank you very much.

  Speedlauncher Adobe is a legitimate program, while orangefirefox.exe presents itself as an infection by the worm on a google search.

  It's a little unusual that Kaspersky would freeze even in SafeMode... perhaps running a chkdsk might help take the files that programs AV and defrag crash on: http://support.microsoft.com/kb/315265

  You may disable the system restore: http://support.microsoft.com/kb/310405 and this should get rid of all the restore points and then hopefully no longer break when scanning, but make sure you turn it!

  But sometimes I come across systems that had infections as well as at the end of all the damage that has been caused, it is better just to do a reinstall.

  --> I hope this helps! Please vote or mark as correct answer if it doesn't :)<>

  http://www.xinx.co.uk - my website
  http://www.systems-and-solutions.co.uk - where I work

  
  Microsoft info on phishing
  Information for Microsoft on the fake security software

• virus scan starts and stops immediatrly and I have error message an error has occored in a script on this page

  Have windows xp service Pack 3

  Hello

  ·         What anti-virus program do you use?

  ·         What is the full error message?

  ·         Where exactly you get this error message?

  ·         Are you do online virus scan? If so, what web browser do you use?

  Please provide us with more information about ht question so we can help you further. In the meantime, I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Error - subsystem spooler constantly "has a problem and needs to close" after downloading the latest McAfee Virus Scan.

  Original title: restarted to pick up McAfee download and now subsystem spooler remains standing.

  After the restart to activate the download of McAfee Virus Scan latest subsystem spooler constantly "encounters a problem and needs to close" I sent in many reports to Microsoft today.  Help!  Steve

  Original title: restarted to pick up McAfee download and now subsystem spooler remains standing.

  After the restart to activate the download of McAfee Virus Scan latest subsystem spooler constantly "encounters a problem and needs to close" I sent in many reports to Microsoft today.  Help!  Steve

  Thanks for the recommendation to use the FIX IT utility.  When running it I get the same message, and it reports that it is unable to solve the problem.

  You ask "exactly when the problem happens" it happens 3 times at the start and at any time an application wants to check on the spooler.

  I don't know if the subsystem spooler itself is damaged or if anything is damaging the spooler when starting.

  I asked McAfee to watch.  They said that my Virus Scan is not installed correctly and had me download and reinstall a new version of the anti-virus.  I did a full scan last night that completed without encountering any problems.

  Help, please.  Thank you, Steve

• Get "communication error with kernel" message when you try to run a virus scan program

  Get "communication error with kernel" message when you try to run a virus scan program

  Hello

  What antivirus do you use?

  Follow the steps in the article mentioned below and check if this solves the problem.

  
  The error message "error communicating with kernel":
  http://KB.eset.com/esetkb/index?page=content&ID=SOLN2280

• After a virus scan I now get this message when I go to my Outlook Express: error number: 0x800CCC90

  After a virus scan I now get this message when I go to my Outlook Express... I can't bring in mail or send... Thanks a lot for all the help... Dave

  The server responds with an error. Account: "pop.embarqmail.com', server: 'pop.embarqmail.com', Protocol: POP3, server response: '-ERR cannot establish TLS with POP server 208.47.184.129:110, SSL_connect error 5', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC90

  In addition to the suggestion of Firedog, after disabling email scanning (see www.oehelp.com/OETips.aspx#3) you may need to remove your e-mail account, close and reopen OE and then add it back back.

  Steve

• Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Downloaded and paid of Minecraft and having problems with Java, Anti Virus Scan and Windows Update - error code 800F081F

  Would you advice, thank you.

  Hi Hugo,.

  1. what anti-virus software you have installed in the computer?

  2. What is the full error message/code?

  3. the issue occurred after you install Minecraft?

  4. are you able to play Minecraft without any problem?

  5. what happens with Antivirus and Java?

  Windows Update can occur if one or more of the following conditions are met:

  1. the Windows Update database is damaged.

  2. antivirus software is configured to scan the %Windir%\SoftwareDistribution folder.

  3. the service (BITS) Background Intelligent Transfer Service does not receive a content link header.

  4. a required system file is incorrectly registered.

  5. Windows Installer has encountered an error.

  6. the manifesto of component maintenance (EC) is damaged.

  7. the Windows Update service has stopped during the installation.

  8. a version of the file conflict exists with Windows Update agent files.

  Please follow the steps described in the methods to solve the problem:

  Method 1: We will try the steps from the following link and check the result:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058?WA=wsignin1.0

  Method 2:

  To correct the errors that occur when you use Windows Update, install, and run the system update readiness tool. The tool analyzes inconsistencies on your computer and fixes as its current installation.

  You can view the following link to download the system update readiness tool and check:

  System tool update that corrects problems of Windows Update is available for Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Details of the event log to find what caused the Antivirus and Java to fail:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Hope that the information provided is useful.

  For any help related to this problem or any question of Windows, you can still display in the Microsoft Community Forum!

• Cannot format DVD error "unable to complete the format."

  Original title: Impossible to format error DVDs

  Can anyone help. I have Windows Vista Home Premium 32-bit with service pack 2. I'm unable to format a DVD RW it comes back with an error message saying unable to complete the format. I have tried different brands of DVD, I saw it was a mistake before service pack 2 and there was a fix. I have SP2 and it will not apply the hotfix that is a quite old. Any ideas?

  Hello

  It seems that you are unable to format DVD, you get an error that it is unable to complete the format.

  You format the drive by using the "active file system?

  Here are a few troubleshooting steps that you can try to solve this problem.

   

  Method 1: Run the following fix - it.
  

  Your CD or DVD drive cannot read or write media.
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Method 2: Remove and reinstall the drivers for the CD or DVD drive

  To do this, follow these steps:

  a. Click Start and then click Control Panel. Click system and security, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  b. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK. Restart the computer.

  e. After you restart the computer, the drivers will be installed automatically.

  Method 3: Refer to this link.
  Format a CD or DVD

  http://Windows.Microsoft.com/en-us/Windows-Vista/format-a-CD-or-DVD

  If you have additional problems, please reply to this post and we will be happy to help you further.

• 0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted

  Hello! I got this message from malware (I clicked to delete) in surfing on firefox and after awhile the explorer.exe closes with an error. I try to open the Task Manager and it says explore cannot be found!
  I rebooted and then I got this message "0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted" and can't get anywhere.
  I can't even go in safe mode, the same error messages appears.

  Hi James,

  You could try the Startup Repair to see if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• "unable to complete backup" error Code 0 x 80070002

  Original title:

  Error 0 x 80070002

  Windows 7 Home Premium Version

  Seagate external hard drive / software Acronis

  I am unable to complete my WIndows 7 Home Prem to backup on my Segate external drive.  63% in the backup, I get "unable to complete backup" error Code 0 x 80070002.  How can I get my support to end?

  Hello

  Welcome to the Microsoft Community Forums.

  From your post, it seems that the backup is not complete and give you an error code: 0 x 80070002.

  Quick questions:

  1. What is the full error message?

  2. how many profiles user is there is your computer?

  3. What Backup program do you use?

  This problem may occur if:

  Cause of scenario 1

  This problem occurs if you save a library that contains custom folders that are located under your user profile.

  Cause of scenario 2

  This problem occurs if the following conditions are met:

  ·         Backup Windows tries to back up files in folders LocalLow, Contacts and research.

  ·         These files are not present on your computer.

  Note These files are only created if certain applications are installed on the computer.

  Cause of scenario 3

  This problem occurs if the following conditions are met:

  ·         The computer has an NVIDIA USB EHCI Enhanced Host Controller Interface () chipset.

  ·         The computer has at least 4 GB of RAM.

  ·         You try to copy data from the computer to an external USB storage device.

  If you use the Windows backup program then please go and follow the methods mentioned below and later a update on the State of the question.

  Method 1: 0x8100002F error code and error code 0 x 80070002 when you back up files in Windows 7:http://support.microsoft.com/kb/979281

  Method 2: Try to run the check disk on the system using the link below.

  Check your hard drive for errors: http://windows.microsoft.com/en-US/windows7/Check-a-drive-for-errors

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost.

  Hope that it helps post back if you have questions about Windows and we will be happy to help you.

• Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!

  Please help me! ....
  Audio service does not
  I tried Services.msc and tried starting windows Audio...
  The following error has come!
  Windows could not start the service audio windows on the local computer. Error 1067: The process is completed in an unexpected way!
  There is a sign of X in the audio icon...
  and when I click on this audio icon... TROUBLESHOOTER OPENS...
  all this happened all of a sudden!
  Please help me!
  Thank you.
  Nischal Sp

  Please provide the error screenshot more better assitance. Also, try this:

  Try to copy and merge the audio from another Windows 8 or better service.

  You can do this by going to the Registry Editor (make sure that the other computer is also a 32-bit system)

  Go to HKLM/system/current control set/services/audiosrv click audiosrv and then on the file menu, select export and save the file to a USB key or drive.

  While copy on your machine and merge. Then restart your system.

  Otherwise reset Windows 8:

  http://www.kapilarya.com/how-to-reset-Windows-8

  Good luck once again :)

• Unable to connect to sync Firefox (when I try to sign saying unexpected error)

  This morning when I opened firefox I noticed that I lost all my saved passwords. When I tried to connect with my sync account, it says simpliy the unexpected error.

  Hello
  Usually when there is an unexpected error, the registration of the account on the computer with the question and then to solve this problem.
  Please try this:

  1. Open the Firefox Menu, then click options
  2. Open an account Sync and delete
  3. Close and open Firefox
  4. Repeat 1 and reconnect.

  Does this solve the error?

• Time machine unable to complete upward "an error occurred when creating a backup folder".

  Hi, I just graduated to El increase captain and since I had problems with my hard drive backup and the Time Machine. After you have installed the El captain, I get an error message that says 'save the failure. Full backup impossible. An error occurred during the creation of the backup folder. "Run disk utility to repair your backup disk.  When I made that I received the error "update boot support partitions for the volume as required.  Failed to dismount the volume for repair. Operation failed.  I can see the name of the hard disk in the sidebar of finder, but it has no history icon to eject so I right click on it and select "Force eject". Unplug the USB and reconnect USB for hard disk reappears in the side bar of the Finder. Once again same message execution utility disk first aid. I try to partition the drive in disk utility, but the button is grayed until I have change the disc name in the text field "Partition" 'apply' reselect "OX extended extended (journaled)" in the menu drop-down "Format". I then click on apply and get the error message that it "cannot unmount disk '. "Move up" button at the top of the disk utility window seems to do nothing. I then tried to drive 'Erase' and got the error message "disc remove POSIX reports: operation could not be completed." Input/output error. Operation failed. "So I clicked once more"Force eject", disconnected and reconnected USB, hard drive selected in the sidebar"Finder"ran"Set_Up.dmg"that was on the hard drive. Who seemed to rise to recording on the Seagates Web site. Player again activated in selected Time Machine preferences 'Back Up Now' of Time Machine in the Menu bar has obtained progress bar "Preparation to Back up...". "in Time Machine preferences for half an hour... Back at the beginning of the loop. States of Error Message 'save the failure. Full backup impossible. An error occurred during the creation of the backup folder. "Run disk utility to repair your backup disk.

  Ref: http://pondini.org/TM/Troubleshooting.html see espically - http://pondini.org/TM/C10.html

  Full backup impossible. An error occurred during the creation of the backup folder.