Unable to connect except in safe mode

Similar Questions

• El capitan update fails to restart except in safe mode. can I recover the operating system in safe mode?

  ElCapitan updated (from apple update) fails to complete restart, except in safe mode. How can I recover or reinstall the OS of a restart to safe mode?

  Boot into Recovery (R command) and run disk utility > first aid on your MacintoshHD

  You can always reinstall the os x from here, if necessary

  OS X: on OS X Recovery - Apple Support

• Vista does not, except in safe mode?

  Have a frined, dell sent him a new hd. It crashes except in safe mode. He has tried to restore factory reimage.

  Is it sounds like a virus or a hardware problem? Any suggestions would be helpful. Thanks, Bruce

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Inspiron 6000 connect only in safe mode

  Hi I have a very complicated problem with this dell inspiron 6000 would initially connect to the internet fine and now connect only in safe mode with networking support.

  Windows XP pro, all updates and the drivers installed and the latest drivers for the hardware as well.

  I am connected ATM threw a wired router with the onboard broadcom 440 when in normal mode, I get a DNS error and I am in safe mode without error LOL. I ran ipconfig with each listed switch.

  It is setup exactly the same thing in normal mode as in trunk then yes time for a punt and hope for a field goal.  nothing has been changed any software added recent updates installed were the 8th of this month. It comes from spending a couple of days.

  I used the winsockfix corrupt but also removed all the network hardware in normal conditions and then restarted in safe and removed there as well. Following is the display of the ipconfig command.

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\Misty > ipconfig/all

  Windows IP configuration

  Name of the host...: mistysdammit
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: hsd1.or.comcast.net.

  Ethernet wireless network connection card:

  The connection-specific DNS suffix. :
  ... Description: Intel (r) PRO/Wireless 2200BG Network
  Connection
  Physical address.... : 00-15-00-1B-73-0E
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... Autoconfiguration IP address: 169.254.156.42
  ... Subnet mask: 255.255.0.0.
  ... Default gateway. :

  Adapter Ethernet Local Area Connection 3:

  The connection-specific DNS suffix. : hsd1.or.comcast.net.
  ... Description: Broadcom 440 x 10/100 integrated Cont
  roll
  Physical address.... : 00-12-3F-E6-C1-E6
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.1.101
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 68.87.69.146
  68.87.85.98
  Lease obtained...: Wednesday, April 23, 2008 06:16:41

  End of the lease...: Wednesday, May 14, 2008 02:16:41

  C:\Documents and Settings\Misty > ipconfig/all

  Windows IP configuration

  Name of the host...: mistysdammit
  Primary Dns suffix...:
  Node... type: broadcast
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: hsd1.or.comcast.net.

  Adapter Ethernet Local Area Connection 3:

  The connection-specific DNS suffix. : hsd1.or.comcast.net.
  ... Description: Broadcom 440 x 10/100 integrated Cont
  roll
  Physical address.... : 00-12-3F-E6-C1-E6
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.1.101
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 68.87.69.146
  68.87.85.98
  Lease obtained...: Wednesday, April 23, 2008 06:22:23

  End of the lease...: Wednesday, May 14, 2008 02:22:23

  C:\Documents and Settings\Misty >

  now, you'll notice the wireless is on a different dns so I disabled it because I do not use home wireless. I can still connect if its active but only in safe mode.

  So in conclusion, I hope that im missing an obvious problem and that people will notice it for me until I break a toe to try this investment option.

  
  

• Unable to connect to the server under any account except in safe mode - Windows Server 2008 R2 Standard.

  My Windows Server 2008 R2 does not all connect directly to the server - level of the console or via the desktop remotely.  The symptom is that Active Directory is not running.  I tried to connect computers MacBook with OS X (10.5) to active directory.  I can log on to your desktop and see all the network shares, so all users seem to work OK - performance is slower than usual.  Logging indicates the user ID or password is not valid, but they are working on the jobs or when we book in safe mode.  DCDiag does not work because it cannot log in with credentials.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet forum
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Unable to connect to the internet, except in safe mode

  I worked with the cable co and co wireless router and they said that I must have some settings on my computer that let me access the internet unless in safe mode.  It seemed to have happened right after that I tried to hang a new wireless router.  Once I followed the steps for the wireless router, I got a message that there is no internet connection.  I know that the modem works, because I can hard wire on my laptop and log in safe mode with network and be well.  There must be a setting that I did not find, but which must be modified to allow access to the internet the way "normal".  Anyone have any ideas?

  
  

• My pc is unable to load the program except in safe mode, which is a recent problem. Time must also be reset whenever I start. any suggestions

  At startup the program do not load beyond the xp logo and then a black screen. The only way to load is in safe mode. The clock needs daily update, is it connected?  I can't restore, but might do at the beginning, but not more. My antivirus is also disabled, it's because its in safe mode. Could all this be reduced to a battery of spleen?

  people suggestions.

  Hi Mike,.

  ·         You did changes to the computer before the show?

  Try the following.

  Method 1: Read the following article.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

  Method 2: Follow the steps in the article mentioned below.

  After the Windows Logo appears or after you log in to Windows, a Windows XP computer cannot display the wallpaper, a black screen or a blue screen

• Firefox opens not except in safe mode

  When I clicked to open Firefox a few days ago, a small window opens with this message:

  A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends.
  
  Script: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:623
  
  
  I found the solution page about this to Firefox and followed the instructions - closed FF, open in Mode safe, is go to Add - ons and changed my theme to the default.

  Then I closed FF and it has reopened.

  The solution worked. (yay)

  Later, however, I had the same problem when I tried to open Firefox again.

  I went through the steps of opening Safe Mode but my theme was already by default, so I changed to another and then changed back to the value default, FF closed and then reopened.

  When I had the same problem, once again, I went through the above step and then uninstalled all the themes, but the default value. (Or so I thought).

  The next time I tried to open FF, the same ole error message came. I did the fix mode safe, FF has closed and then reopened.

  However, another message came:

   FLAGFOX VERSION: null (missing IPDB!)
  
  

  ERROR MESSAGE: Error starting Flagfox Fatal!

  LIFTING EXCEPTION: TypeError: ExtensionManager.getItemForID (id) is null

  STACK TRACE: start (@file:///C:/Users/Donna/AppData/Roaming/Mozilla/Firefox/Profiles/ilt58l3p.default/extensions/%7B1018e4d6-728f-4b20-ad56-37578a4de76b%7D/chrome/flagfox/modules/flagfox.jsm:40)
  ([object ChromeWindow])@file:///C:/Users/Donna/AppData/Roaming/Mozilla/Firefox/Profiles/ilt58l3p.default/extensions/%7B1018e4d6-728f-4b20-ad56-37578a4de76b%7D/chrome/flagfox/modules/flagfox.jsm:159
  Flagfox_loadForThisWindow ([Object Event]) @chrome://flagfox/content/overlay.xul: 16

  BROWSER: Mozilla Firefox (Gecko 1.9.2.8/20100722155716) 3.6.8/20100722155716 settings regional US on WINNT x 86-msvc'
  

  Ugh.

  There was a link to click on but before I could click on it, another window open with this old error:

  A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script ends.
  
  Script: file:///C:/Program%20Files/Mozilla%20Firefox/components/nsExtensionManager.js:623
  
  
  So, I could not click on the link for Flagfox error because I had to close the 2 windows to go to FF Safe-Mode to get rid of the error Add-ons/themes.

  After closing then opening again FF, it opens but crashes. At one point, I had dinner and then came back, and he was still suspended. So, I opened the end of task task manager in FF to close.

  A few weeks ago, I had installed Chrome. Since I saw 'ChromeWindow' in the error of Flagfox, I thought maybe Chrome was to ruin FF so I uninstalled Chrome, turned off and turned back on my computer.

  Then I tried to open FF, only to have these two errors pop up again.

  BTW, after the opening of the FF mode safe (for the moment zillionth), I went to "themes" and they were all there - I thought I had uninstalled all except the default value, but they were all there.

  The furthest (more?) I've come is to be able to click on the link of FlagFox open FF, but then this happens:

  Flagfox.servehttp.com takes too long to respond

  and FF is suspended... and hangs...

  I'm so frustrated!

  So I can open only FF mode without failure.

  I came here on the forum and connected, etc. to post this message, but none of the boxes issue-details were visible, so I am currently using Opera.

  I'd appreciate any help. Please keep in mind that I'm not 12 years old so I don't know much about computers, lol. In other words, please answer with simple and easy words then I'll understand.

  Thank you!

  By chance you have Personas Plus installed, if you do so in safe mode you can access the Add-ons Manager and either disable or uninstall, that should solve your problems.

  The error messages indicate that the add-on FlagFox is the cause of the problems, but Personas Plus version 1.6 is currently havoc with Add-ons. For more details on how to disable or uninstall modules see Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems

• shortcuts don't work not except in safe mode

  original problem - could not access the files on server - received ID username/password invalid even after reset of net admin user. What new user created on the desktop icons and start menu has stopped working (double-click appeared to do nothing).

  After experimentation, found that the opening of any .lnk returns fileNotFound exception. In safe mode without problem.

  A ran two separate a / v verifies - ESET and MalwareBytes.

  Tried to disable as many external services and relevant as appeared startup tasks, without result.

  Problem with new shortcuts and newly created the local administrator user.

  This is updated from windows. No effect.

  Help, please! Thank you.

  Hello chaim handler1,.

  I suggest to try in a clean boot in order to eliminate any possible conflict of third parties:

  Step 1: Perform a clean boot
  Note If the computer is connected to a network, network policy settings may prevent you from following these steps. We recommend strongly that you do not use System Configuration utility to change startup options on the computer, unless a support engineer Microsoft directs you to do so. This can make the computer unusable.
  a. log in the computer using an account with administrator rights.
  b. ClickStartCollapse this includes this image, typemsconfig.exe in the search box, theStart then press ENTER to start the System Configuration Utility.Collapse this includes this imageIf you are prompted for an administrator password or for confirmation, type your password, or clickContinue.
  c. arencontre, clickSelective Startup tab and then click on clear theLoad startup items check box. (Use Boot check box is not available.)
  d. on theServicestab, select hide it all the box, check Microsoft services, and then clickDisable all.

  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
  e. click OK, and then to clickRestart.
  Step 2: Enable half the services
  a. follow steps 1a and 1B to start the System Configuration utility.
  b. click on the services tab and then click to select theHide all Microsoft services checkbox.
  c. Click to select half of the check boxes in the service list.
  d. click OK, and then to clickRestart.
   
  Step 3: Determine whether the problem returns
  If the problem persists, repeat steps 1 and 2. In step 2, click to clear half of the check boxes that you have initially enabled in the service list.

  If the problem does not occur, repeat steps 1 and 2. In step 2, select only half of the remaining check boxes that are cleared in the service list. Repeat these steps until you have selected all the check boxes.

  If only one service is selected in the list of services, and you the problem persists, the service selected the cause of the problem. Go to step 6. If no service is causing this problem, go to step 4.
  Step 4: Enable half of the startup items
  a. perform a clean boot by repeating step 1.
  b. click the theStartup tab and then click to select half of the check boxes in the list of items of theStartup.
  c. click OK, and then to clickRestart.
   
  Step 5: Determine whether the problem returns
  If the problem persists, repeat steps 1 and 4. In step 4, click to clear half of the check boxes that you have initially enabled in the list of items of theStartup.

  If the problem does not occur, repeat steps 1 and 4. In step 4, select only half of the remaining check boxes that are disabled in the list of items of theStartup. Repeat these steps until you have selected all the check boxes.

  If only one startup item is selected in the startup item list, and you still experience the problem, start selected in the list element is the service that is causing the problem. Go to step 6.

  If no startup item causes this problem, a Microsoft service most likely the cause of the problem. To determine which Microsoft service may be the cause of the problem, repeat step 1 and step 2 without selecting theHide all the box Microsoft services at every step.
  Step 6: Resolve the problem
  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.
  Step 7: Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. ClickStart collapse that includes this image, typemsconfig.exe in the search box and press ENTER. Collapse this includes this image
  If you are prompted for an administrator password or for confirmation, type your password, or clickContinue.
  b. on the arencontre tab, click Start zone option, and then click OK.
  c. When you are prompted to restart the computer, clickRestart.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Firefox crashes all the time when I open it. I'm unable to open it in safe mode and reinstall the app did not work.

  I've been running Firefox v. 18.0.2 and for a few days the application continually crashes whenever I open it. I am currently not able to enter in safe mode and it happens to all profiles on the computer. I went through and updated all my Add-ons, but the problem persists. I decided to re - install the application by deleting all the configurations that have been previously configured. I also tried to delete the entire folder to % APPDATA%\Mozilla. Up to this point, I am unable to get Firefox running.

  Try to remove the profiles.ini file to force Firefox to create a new default profile.

  • http://KB.mozillazine.org/profiles.ini_file
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Some applications keep constantly suspended - except in safe mode

  Since a few days some apps (Lightroom, VLC, JDownloader, EtreCheck) keep suspended / beach balling right after I have started them.

  VLC has the exception that the video that you open is normal but the GUI just does not respond.

  When it is started in Safe Mode, all normal function programs.

  I have a number of things without result:

  -Recovery mode reinstall then installed Version 10.10

  -Put to upgrade to 10.11.4 (before the 10.11.4 upgrade also Chrome and the system preferences window have been affected)

  -Updated apps all affected to their latest Version.

  -Repeated of Diagnostics and HDD check. No errors.

  -Launch Agents/demons of deactivation. Tested and reactivated

  -kextstat | grep - v apple to see what remains is launched a startup. Most of them have uninstalled or disabled.

  3.5 i7 iMac 27 "end 2013, 32GB, GTX 780 M 4 GB, OS X 10.11.4

  Any ideas?

  EtreCheck version: 2.9.11 (264)

  Report generated 2016-04-16 11:28:33

  Download EtreCheck from https://etrecheck.com

  Time 01:25

  Performance: Excellent

  Click the [Support] links to help with non-Apple products.

  Click [details] for more information on this line.

  Problem: Beachballing

  Hardware Information: ⓘ

  iMac (27 inch, at the end of 2013)

  [Data sheet] - [User Guide] - [warranty & Service]

  iMac - model: iMac14, 2

  1 3.5 GHz Intel Core i7 CPU: 4 strands

  32 GB of expandable RAM - [Instructions]

  BANK 0/DIMM0

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 8 GB DDR3 1600 MHz

  0/DIMM1 BANK

  OK 8 GB DDR3 1600 MHz

  BANK 1/DIMM1

  OK 8 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en1: 802.11 a/b/g/n/ac

  Video information: ⓘ

  NVIDIA GeForce GTX 780M - VRAM: 4096 MB

  Software: ⓘ

  OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour

  Disc information: ⓘ

  SD0128F SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) < not mounted >: 210 MB

  Boot OS X (disk0s3) < not mounted >: 134 MB

  Macintosh HD (2) /: 1.11 TB (214.30 GB free)

  Storage of carrots: disk0s2 120.99 GB Online

  Storage of carrots: disk1s2 999.35 Go online

  ST1000DM003 disk HARD APPLE disk1: (1 TB) (rotation)

  EFI (disk1s1) < not mounted >: 210 MB

  Recovery HD (disk1s3) < not mounted > [recovery]: 650 MB

  Macintosh HD (2) /: 1.11 TB (214.30 GB free)

  Storage of carrots: disk0s2 120.99 GB Online

  Storage of carrots: disk1s2 999.35 Go online

  USB information: ⓘ

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Hub keyboard Apple, Inc.

  Logitech USB receiver

  Apple Inc. Apple Keyboard

  Lightning information: ⓘ

  Apple Inc. Thunderbolt_bus.

  Configuration files: ⓘ

  / etc/sudoers, 1319 but file size expected 2299

  /etc/sysctl.conf - file exists but not expected

  Guardian: ⓘ

  Mac App Store and identified developers

  Kernel extensions: ⓘ

  / Library/Extensions

  [loading] at.obdev.nke.LittleSnitch (3.6.3 - SDK 10.8 - 2016-04-15) [Support]

  com [loading]. Logitech.Control Center.HID Driver (3.9.1 - SDK 10.8 - 2016-04-15) [Support]

  com [loading]. Driver Logitech.Unifying.HID (1.3.1 - SDK 10.8 - 2016-04-15) [Support]

  [loading] com.seagate.driver.PowSecDriverCore (5.2.7 (26996) - 10.4 SDK - 2016-04-15) [Support]

  / Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

  com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.7 (26996) - 10.4 SDK - 2015-12-04) [Support]

  com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.7 (26996) - SDK 10.5 - 2015-12-04) [Support]

  com.seagate.driver.SeagateDriveIcons [no charge] (5.2.7 (26996) - 10.4 SDK - 2015-12-04) [Support]

  / System/Library/Extensions

  com.nvidia.CUDA [no charge] (1.1.0 - 2016-04-15) [Support]

  [no charge] com.waltop.iokit.driver.USBAtTablet (USBAtTablet 1.1.0-2016-04-15) [Support]

  Launch system officers: ⓘ

  [loaded] 7 tasks Apple

  [loading] 161 tasks Apple

  [operation] 70 tasks Apple

  Launch system demons: ⓘ

  com.Apple.watchdogd.plist [failure]

  [loaded] 42 tasks Apple

  [loading] 161 tasks Apple

  [operation] 85 tasks Apple

  Launch officers: ⓘ

  at.obdev.LittleSnitchUIAgent.plist [no charge] (2016-04-15) [Support]

  com [no charge]. Logitech.Control Center.Daemon.plist (2015-09-19) [Support]

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-04-16) [Support]

  com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist [no charge] (2015-10-15) [Support]

  com.adobe.AdobeCreativeCloud.plist [no charge] (2016-02-15) [Support]

  com.DivX.DMS.agent.plist [no charge] (2014-11-17) [Support]

  com.Google.keystone.agent.plist [no charge] (2016-03-02) [Support]

  com.hyperpen.hyperpen.plist [no charge] (2011-06-30) [Support]

  com.nvidia.CUDASoftwareUpdate.plist [no charge] (2016-04-15) [Support]

  [no charge] com.oracle.java.Java - Updater.plist (2016-04-15) [Support]

  net.culater.SIMBL.Agent.plist [no charge] (2016-01-07) [Support]

  org.macosforge.Xquartz.startx.plist [no charge] (2014-08-11) [Support]

  Launch demons: ⓘ

  at.obdev.littlesnitchd.plist [no charge] (2016-04-15) [Support]

  com.adobe.ARMDC.Communicator.plist [no charge] (2015-10-15) [Support]

  com.adobe.ARMDC.SMJobBlessHelper.plist [no charge] (2015-10-15) [Support]

  com.Adobe.adobeupdatedaemon.plist [no charge] (2016-04-14) [Support]

  com.Adobe.agsservice.plist [no charge] (2016-04-14) [Support]

  com.Adobe.fpsaud.plist [no charge] (2016-04-05) [Support]

  com.Bombich.ccchelper.plist [no charge] (2015-04-13) [Support]

  [no charge] com.edb.launchd.postgresql - 8.4.plist (2015-12-08) [Support]

  com.Google.keystone.daemon.plist [no charge] (2016-03-02) [Support]

  com.nvidia.Cuda.Launcher.plist [no charge] (2016-02-03) [Support]

  [no charge] com.oracle.java.Helper - Tool.plist (2016-04-15) [Support]

  com.seagate.TBDecorator.plist [no charge] (2013-10-12) [Support]

  NET.TunnelBlick.TunnelBlick.tunnelblickd.plist [no charge] (2015-06-01) [Support]

  org.macosforge.Xquartz.privileged_startx.plist [no charge] (2014-08-11) [Support]

  org.wireshark.ChmodBPF.plist [no charge] (2015-07-16) [Support]

  org.wireshark.XQuartzFixer.plist [no charge] (2015-07-16) [Support]

  User launch officers: ⓘ

  [no charge] com.adobe.AAM.Updater - 1.0.plist (2014-07-21) [Support]

  [no charge] com.c - command.SpamSieve.LaunchAgent.plist (2016-04-16) [Support]

  com.linotype.FontFolderProtector.plist [no charge] (2015-12-27) [Support]

  [no charge] net .infinite - labs.SIMBLEnablerForSandboxedApps.plist (2016-01-07) [Support]

  net.tunnelblick.tunnelblick.LaunchAtLogin.plist [no charge] (2015-03-30) [Support]

  Other applications: ⓘ

  [ongoing] com.adobe.Lightroom6.51872

  [ongoing] com.etresoft.EtreCheck.226272

  [ongoing] com.google.Chrome.66912

  [ongoing] JP.co.Canon.cijscannerregister.154912

  [loading] 425 tasks Apple

  [operation] 167 tasks Apple

  Plug-ins Internet: ⓘ

  AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2016-04-14) [Support]

  FlashPlayer - 10.6: 21.0.0.213 - SDK 10.6 (2016-04-08) [Support]

  QuickTime Plugin: 7.7.3 (2016-03-12)

  AdobePDFViewerNPAPI: 15.010.20060 - SDK 10.8 (2016-03-10) [Support]

  Flash Player: 21.0.0.213 - SDK 10.6 (2016-04-08) [Support]

  AdobePDFViewer: 15.010.20060 - SDK 10.8 (2016-03-10) [Support]

  DivX Web Player: 3.2.4.1250 - SDK 10.6 (2014-11-26) [Support]

  Default browser: 601 - SDK 10.11 (2016-03-12)

  OVSHelper: 1.1 (2014-11-26) [Support]

  JavaAppletPlugin: Java 8 updated 77 03 (2016-04-15) check the version of build

  Safari extensions: ⓘ

  AdBlock - Michael Gundlach - https://getadblock.com (2015-09-09)

  Ghostery - GHOSTERY, Inc. - https://www.ghostery.com/ (2016-03-14)

  YoutubeWide - Pedrocc - http://www.pedrocc.com/safari (2014-07-17)

  3rd party preference panes: ⓘ

  Preferences CUDA (2016-02-03) [Support]

  Flash Player (2016-04-05) [Support]

  Java (2016-03-21) [Support]

  Logitech Control Center (2016-04-15) [Support]

  Paragon NTFS for Mac® OS X (2016-04-15) [Support]

  Seagate for Mac OSX dashboard (2016-04-15) [Support]

  Teleport (2013-10-22) [Support]

  Time Machine: ⓘ

  Skip system files: No.

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 1.11 TB disc: 899,85 GB

  Destinations:

  Time Maschine [Local]

  Total size: 998,79 GB

  Total number of backups: 12

  An older backup: 01.03.16, 02:03

  Last backup: 23.03.16, 12:11

  Backup disk size: too small

  998,79 GB backup size < (disc 899,85 GB X 3)

  Top of page process CPU: ⓘ

  264% Google Chrome Helper (9)

  14% Google Chrome

  3% fontd

  kernel_task 2%

  1% adobe Lightroom

  Top of page process of memory: ⓘ

  Kernel_task 1.25 GB

  983 MB Adobe Lightroom

  786 MB Google Chrome Helper (9)

  Ocspd 492 MB

  197 MB Google Chrome

  Virtual memory information: ⓘ

  26,00 GB of free RAM

  5.76 used GB RAM (1.56 GB being cached)

  Used Swap 0 B

  Diagnostic information: ⓘ

  16 April 2016, 11:24:52 self-test - spent

  April 16, 2016, 11:24:36 /Library/Logs/DiagnosticReports/EtreCheck_2016-04-16-112436_[redacted].hang

  /Users/user/downloads/EtreCheck.app/Contents/MacOS/EtreCheck

  April 16, 2016, 11:23:52 /Library/Logs/DiagnosticReports/EtreCheck_2016-04-16-112352_[redacted].hang

  April 16, 2016, 11:07:07 AM/Library/Logs/DiagnosticReports/Adobe Lightroom_2016-04-16-110707_ [redacted] .hang

  / Applications/Adobe Lightroom/Adobe Lightroom Lightroom.app/Contents/MacOS/Adobe

  April 15, 2016, 14:21:02 /Library/Logs/DiagnosticReports/VLC_2016-04-15-142102_[redacted].hang

  /Applications/VLC.app/Contents/MacOS/VLC

  April 15, 2016, 14:02:06 ~/Library/Logs/DiagnosticReports/Adobe Desktop Service_2016-04-15-140206_ [redacted] .crash

  com.adobe.acc.AdobeDesktopService - / Library/Application Support/Adobe / * / Adobe Office Service.app/Contents/MacOS/Adobe Office Service

  April 15, 2016, 13:59:21 /Library/Logs/DiagnosticReports/VLC_2016-04-15-135921_[redacted].hang

  April 15, 2016, 13:43:57 /Library/Logs/DiagnosticReports/VLC_2016-04-15-134357_[redacted].hang

  April 15, 2016, 01:37:34 PM/Library/Logs/DiagnosticReports/Adobe Lightroom_2016-04-15-133734_ [redacted] .hang

  April 15, 2016, 13:37:29 /Library/Logs/DiagnosticReports/VLC_2016-04-15-133729_[redacted].hang

  April 15, 2016, 01:34:20 PM/Library/Logs/DiagnosticReports/Adobe Lightroom_2016-04-15-133420_ [redacted] .hang

  April 15, 2016, 13:28:24 ~/Library/Logs/DiagnosticReports/dynamiclinkmanager_2016-04-15-132824_[redacted] .crash

  com.Adobe.dynamiclinkmanager.application - ntents/MacOS/dynamiclinkmanager/Applications/Adobe Bridge CC / Adobe Bridge CC.app/Contents/MacOS/Required/dynamiclinkmediaserver/dynamiclinkmanager.app/Co

  April 15, 2016, 13:28:20 /Library/Logs/DiagnosticReports/VLC_2016-04-15-132820_[redacted].hang

  April 15, 2016, 01:27:08 PM/Library/Logs/DiagnosticReports/JavaApplicationStub_2016-04-15-132708_ [redacted] .hang

  /Users/user/*/JDownloader2.app/Contents/MacOS/JavaApplicationStub

  April 15, 2016, 01:23:50 PM/Library/Logs/DiagnosticReports/JavaApplicationStub_2016-04-15-132350_ [redacted] .hang

  April 15, 2016, 01:14:21 PM/Library/Logs/DiagnosticReports/JavaApplicationStub_2016-04-15-131421_ [redacted] .hang

  /Applications/JDownloader.app/Contents/MacOS/JavaApplicationStub

  April 15, 2016, 01:06:01 PM/Library/Logs/DiagnosticReports/JavaApplicationStub_2016-04-15-130601_ [redacted] .hang

  April 15, 2016, 12:52:25 /Library/Logs/DiagnosticReports/VLC_2016-04-15-125225_[redacted].hang

  April 14, 2016, 12:04:08 PM/Library/Logs/DiagnosticReports/Adobe Lightroom_2016-04-14-120408_ [redacted].cpu_resource.diag [details]

  April 14, 2016, 11:48:42 AM/Library/Logs/DiagnosticReports/Adobe Lightroom_2016-04-14-114842_ [redacted] .hang

  April 14, 2016, 11:39:18 AM/Library/Logs/DiagnosticReports/Adobe Lightroom_2016-04-14-113918_ [redacted] .hang

  April 14, 2016, 11:39:02 AM/Library/Logs/DiagnosticReports/Adobe Lightroom_2016-04-14-113902_ [redacted] .hang

  Try to uninstall Little Snitch and tests. Also, if you are not using CUDA you unnstall who.

• I can only connect to Windows safe mode. I get a blank screen otherwise

  Original title: I can only connect to my computer in safe mode. Start windows normally my screen begins to blink on the logon to the black screen. What should I do?

  I was told it had something to do with internet explorer and that I need to update my windows, but my computer won't let me.

  Safe mode is a number of things.  First, he starts using the clean boot programs needed to operate.  Second, he began to use a screen resolution 'safe' which is supported by all monitors (usually 640 x 480).  Your problem may be due to your video card being assigned to a resolution that your monitor does not support or does not reach.  If it is a recent development, the fastest solution may be to perform a system restore to a time before you had this problem.  You can do safe mode.

  "How to restore Windows XP to a previous state"
    <>http://support.Microsoft.com/kb/306084 >

  Another suggestion is that, after the safe boot mode, change the display resolution (right click Desktop-> properties-> settings tab).

  If those who do not resolve your issue, you can use Microsoft System Configurator, msconfig, to choose what programs launch at startup.

  "How to solve configuration errors by using the System Configuration utility in Windows XP"
    <>http://support.Microsoft.com/kb/310560 >

  HTH,
  JW

• Unable to start XP in safe mode, stuck at mup.sys; BSOD with installation disc

  My computer is a computer laptop Asus eeePC 1000H with no material changes and default OS. I left the machine all night and came to see the machine with the error text:

  "Reboot and select proper boot device."
  "or Insert Boot Media in some boot device and press a key.

  Restart in safe mode gave me the same error, except that I could see that the boot process failed at mup.sys.

  Then I tried to repair my installation by using a Windows XP installation disc so I could use the Recovery Console, but I got a BSOD and error:

  STOP 0X0000007E (0XC0000005, 0XF75DE0BF, 0XF7A2A208, 0XF7A29F08)
  PCI.sys-address F75DE0BF base at F75D7000 Datestamp 3b7d855c

  I have turned off unnecessary equipment in the BIOS and still have the same result. The next step here is to erase completely the machine and retemplate TI - something I'm eager to avoid.

  I've been surfing on support forums all morning and I noticed that there is a spike in people with this problem. Is there a virus going around or was there a windows update last night? I use McAfee if it makes a difference.

  From your description of the problem, it sounds like the hardware failure, no software (virus). First test the drive and RAM. Since you don't have a CD player with eeePCs, you need to use bootable USB based on keys of an external optical drive or troubleshooting tools. Or, if the computer is under warranty, contact Asus support.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  If you can not do the test yourself and/or are uncomfortable opening your computer, take the machine to a professional computer repair shop (not your local equivalent of BigComputerStore/GeekSquad).
  MS - MVP - Elephant Boy computers - don't panic!

• Consumer ir device does not not on HP laptop and windows that do not open except in safe mode

  I had problems since late April and early May.  I have a high tower of HP Pavilion dv6.  When you try to start, the computer will show the Windows logo then a disappearance back quick page, then to the boot in safe mode prompt. I deleted everything that has been added since April with the exception of ITunes. I did a search of system and found that the infrared device consumer does not work.  I read a few posts, but do not seem to be able to try the suggestions around turning off windows system updates since the trouble began.  Is my only option the total system restore?  How can I get that since nothing came with the computer?

  Hello

  Thank you for the reply back, I suggest that you contact HP support and answer if the problem is solved and please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• Windows deleted files to space, now my computer does not start except in safe mode. Any ideas?

  I got a message pop up saying I've been low on free space, I select the files to delete the computer option. He ran through the process and deleted files. I shut down the computer and have not used for a few days.

  I tried to connect this morning it took forever to get to the password page, when I chose my name once again it took forever to load the password box. He then told the welcome as usual, but for several minutes and then the screen turns off, I left for almost an hour and nothing. I removed the battery and connected in safe mode that began end.

  My system using windows Vista. I'm not good with computers so all ideas/help would be great.

  Hello CarrieWilliams,

  Thanks for your post.  Try a Startup Repair before leaving for the new facility.  Let us know the results, we look forward to hearing back on your part.

  See you soon