Unable to connect to Apple double Airport wireless broadband unless 5 mhz is disabled

Similar Questions

• Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Unable to connect XP laptop to my wireless network. Diagnotics says 'error trying to validate the Winsock base providers' couldn't get cable or Internet.

  Hello

  Try the methods below to solve the problem.

  Method 1:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Method 2:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

  http://support.Microsoft.com/kb/811259

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

• Unable to connect to Apple ID after upgrade to ElCapitan 10.11.5

  I have the Macbook Air 11 "1.4 Ghz i5 with 4 GB 1600 MHz DDR3 (early 2014)

  I can't connect to the Apple ID (iCloud, Appstore...) after upgrade in ElCapitan 10.11.5

  About 3 weeks ago I improve my OS in ElCapitan as there was a signal of the Appstore upgrade.

  The download process and the installation was successful, but stuck on 'prepare your mac' session. It took about 2 hours, with cursor processing... Then I closed (push the power button on the keyboard) and turn.

  My Mac can work and in "about this Mac" already made it known that the OS is ElCapitan 10.11.5.

  But unfortunately, since then, I can't sign my Apple ID in the Mac (I use several apple 'iphone', 'ipad' products and my apple ID still works)

  

  I came to the nearby authorized Apple service, they don't have that one solution to re - install my Mac and I have to pay

  Maybe someone has a solution...

  Hi atiqurrakhman,

  From the information provided, it appears that you are unable to connect to your Apple ID for several services on your Mac from your update of OS X El Capitan 10.11.5. I know it's very important to have access to these services on your Mac, then I would be happy to provide assistance.

  Before you start, I recommend that you create a backup of your data using Time Machine. This website will provide more information:

  Use Time Machine to back up or restore your Mac - Apple Support

  Since the update seems stuck, it can not been installed properly on your system. The next step, I would recommend that you reinstall OS X from recovery using the steps here:

  How to reinstall OS X on your Mac - Apple Support

  Reinstall OS X from recovery

  If a recent Mac, you can use OS X Recovery to reinstall OS X.

  

  1. Turn on your Mac.
  2. As soon as you hear the startup tone, hold down the command and R on your keyboard.
  3. Release the buttons after the appearance of the Apple logo.
  4. If you are prompted, select a Wi - Fi network, or connect your Mac to the Internet via an Ethernet cable.
  5. After that the recovery menu will appear, select the option to install OS X.
  6. Follow the prompts on the screen to select your destination drive and install OS X.

  Once this process is complete, try to sign in with your Apple ID using multiple services to see if the problem has been resolved.

  Have a great rest of your day!

• HP Deskjet 3050 - unable to connect to the WPA secure wireless network

  Hello

  My first post here so please excuse any misstep on my part.  I bought this HP Deskjet 3050 a week ago and have since been war with it.  I would be really grateful if someone could possibly give advice on how I can solve this problem.

  I am unable to connect the printer to my secure wireless network, even if the other computers, cell phones, etc. are connected without problem.  I tried WPA, WPA2 and WPA2-Mixed modes with the same failure security. Specifically, the 66% reached Connection Wizard, then displays the error that the wizard can not find/network printer.  If I disable the security, the printer connects very well.

  I use a Linksys WRVS4400N router with firewall and associated firewall disabled settings.  The router broadcasts on 802. 11 g / N mixed mode.

  I install the software provided on the CD for installation on a Windows XP SP3 System.  I confirmed that the PC and the printer are connected to the network are the same.

  The issue as well, if you will allow me: I have not yet tried these drivers, but I see there are any updated drivers for the printer in date from 14/12/2010.  The release notes indicate the improvement of networks, but do not develop beyond that.  Does anyone know if there was a known problem with the connection to secure networks that has now been corrected?

  Finally, just a note that I am partially blind and using a screen on all systems reader.  I'll try my best to be as helpful as I can to please forgive me if I can't find the settings, etc. on screen and sometimes need help for a little more detail.

  Thanks in advance for your help, I really enjoyed.

  Have a nice day,

  All the best for now and take care,

  Hussein.

  It is not the fact that it is impossible, is the fact that this was not done, yet.

  Hello

  first of all, my apologies for the delay getting back to you.  Poor health means that I had little time or want to do great thing on the side of the computer of htings.

  In any case, I am please to say the problem with the HP 3050 failing to connect to my network is now resolved.  There seems to be a bug with the installer, and that seems to include the version the most recent publication Dec 2010.

  To resolve this problem, I did the following:
  1. disable all security for the network options, so it's just an open network.
  2. connect the HP 3050 to the network by using the installation wizard. This time it connected OK for me.
  3. Locate the IP address of the printer.  I used the table of customer list accessed by my router interface. You may be able to get this through the printer on the menu screen, but as I am partially blind, it wasn't an option for me.
  4. Enter the control panel of the printer to http://ip.address.of.printer for example http://192.168.2.108
  5. under Advanced options, configure the network settings, including the password and the Security Protocol.  Don't forget to enter the SSID of the network exactly as it is configured on the router.
  6. apply settings, disconnect from the control panel of the printer.
  7 log in the router configuration panel and re-apply the security options.  Make sure they match these match those entered for the printer.

  I hope it will be useful to others in the same position.

  Thanks again for your time.

  Best,

  H.

• Unable to connect to the Dell 966 wireless printer.

  Original title: unable to connect to my wireless printer

  My laptop is a dell running windows vista and I have a Dell 966 printer all-in-one. I can't have printer to pick up the signal from my laptop wireless. Im not to share the printer also. All the indicators are on my laptop and printer. I also have no ip and not the gateway ip address.

  Hi gus,.

  Than you for your message.

  "I can't printer to pick up the signal from my laptop wireless."

  You use a wireless router to share your network?

  "I also have no ip and not the gateway ip address."

  Is - with reference to the computer or the printer?

  "The question is my cell phone and my printer can not communicate. My printer does not have an IP address.

  You try to get the laptop to deliver the IP address of the laptop?

  I propose to move the printer closer to the network router to isolate the interference problems.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to the wired or wireless network.

  wireless network

  OK so my comcast Internet got off because my husband was laid off anyway so now my computer connecting to the tired all wireless network as power ang unplugimg cable everything is hanging Strip tight ideas?

  Hello

  1. are you trying to connect to the home or public network?
  2. what version of Windows are you using?
  3. you receive an error message trying to connect to the network?
  4. What is the brand and model of the computer?
  If you try to connect to the home network, contact the Internet service provider and make sure that the Internet service is activated.
  
  If you try to connect to the public network, try the following methods.
  Method 1:
  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2: Temporarily disable the security software.
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• PhotoSmart 6520: unable to connect to the site w / wireless

  I recently had an unsolvable problem with my Photosmart 6520 involving his inabilaty to print photos.  It has now almost completely off.  I use it with my desktop (using WIN XP) and two other laptops in the House (the one with WIN 7, the other with 8)

  Last week, we noticed that it's no longer access wireless.  The two laptops showed that it among their devices, but he showed in offline mode.  After being unable to reset it online, I deleted the WIN phone 7 to to see if I could find him.  He is unable to do so.  The machine to WIN 8 had no better luck.

  I don't know if the two problems are related, and while I rarely print from the laptop, I'm worried that it may be symptomatic of a breakdown coming in the opposite direction.

  Earlier today, he gave a paper size mismatch message when I tried to run a normal report for the main tray.  I ran diagnostics on this topic and got to resume printing, but I see the smear of ink on the edges of a few leaves.

  The unit is a little less than two years.  Should I waive this subject, or is - this salvagable?

  Hello @PFR443,

  I understand that, as well as a print quality problem, you are also not able to print wirelessly with your all-in-one Photosmart HP 6520. Now, I previously working with you on the following thread: Photosmart 6520 refuses to print photos and had exhausted all efforts to solving the problems with you. In the end, I had to refer you to our queue of Technical Support for the hardware support that your product has met a hardware failure, from which it cannot recover from.

  Part of our troubleshooting was to run a semi Full Reset. We had done that on March 2, 2015. If you remember, this semi Full Reset resets all the settings of your printer. This includes wireless information. Therefore, the wireless feature will need to be reconfigured from scratch on your product. The printer should also be added to each computer that you use with to re-establish the wireless connection.

  If you still want to attempt to reconfigure and reinstall your printer wireless, I can provide you with these steps. But your product is defective. Therefore, things will continue to act on you until you get that fix the printer or replace it with another model.

  Please let me know if you want to continue troubleshooting wireless. I look forward to hear from you!

• Unable to connect to the network with wireless connection on Windows 7.

  Original title: wireless Internet access

  I have good network and internet connectivity when I am connected via CAT - 5 to my router/modem.  However, when I access the wireless network, I always have good connectivity and access to internet but can't send or receive emails or access Web sites.  My client browser and internet messaging turns just until it times out.  Any ideas on the cause of this problem?

  Hi Michael,

  Thanks for posting on the Microsoft Community.

  I understand that you are unable to access e-mails or browse the site when you are connected using wireless network. I appreciate your time and patience to try to resolve the problem.

  1. What is the brand and model of the computer?
  2. What internet browser do you use?
  3. What mail client do you use?
  4. You receive an error message?

  This can occur due to missing updates, hardware or software problem on the computer.

  Initially, run the network troubleshooter from the link below, go to step 3.

  If the problem persists, then check out the link below which helps to fix the network connectivity issues. Wireless and wired network problems:

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab4&V2H=win7tab2&V3H=winvistatab1&v4h=winxptab1

  Hope this helps to solve the issue if the problem persists get back to us. We will be happy to help you.

• Equium L300 unable to connect to my router using wireless

  I have a laptop Equium L300 and can't connect to my router using the wireless option.

  I am told that the wireless feature is disabled on my pc but the switch on the front is activated.

  Can connect with the cable is the wireless.

  Anyone know what this could be?

  Try pressing Fn + F8, only the activated Wifi become?

  In Device Manager, the wireless device is reported to work ok?

  Try a BIOS update as well.

• HP Photosmart B110a all-in-one: unable to connect to the home network wireless HP B110

  Hello

  I haven't used my printer for a while, so put in a new cartridge and tries to connect to my wireless network - domestic (the printer is next to the Belkins router). I've also upgraded to Windows 10 recently (also have a laptop with W7).

  The printer detects the SSID for wifi and after you type the router password wireless (WPA - PSK), it is NOT authenticated.

  The password IS CORRECT (100%) but it fails on the section of SECURITY depending on the display and the summary diagnosis. The message of the report is:

  Your route wireless requires a password WPA securitg. The password configured on your HP printer does not exactly. Run the network setup wireless for re0enter your network wireless WPA security passphrase.

  I need this because the only way I print is wireless email / I send it to the email address designated and it prints - it is not physically connected to any laptop / pc.

  I tried several times, including inputtingthe SSID manually, swtiching OFF etc.

  Please help - thank you in advance.

  Best regards

  Disable and remove temporarily the password on your routers SSID. Now try to connect to your SSID unsecured. Are you successful? If Yes, go back and add WPA2-AES with a password and try again.

• WRT310N V2 - unable to connect to the wired LAN, wireless is OK

  I know that there are similar problems posted everywhere, but I can't seem to find the right solution. My WiFi works fine but cable did not see the router or on the internet. A few details:

  I can communicate between hosts and wireless on the router.

  The router assigns the IP both wired and wireless.

  The wired connection works on the laptop and wireless works on it, too.

  Wired does not work on the desktop, there is no wireless capability.

  Cable cannot reach 196.168.1.1, wireless can.

  I have updated the firmware of the router.

  I installed the latest drivers for the NIC.

  The office (cable) connects to the internet via cable modem, without going through the router.

  I have no firewall active or other security features.

  Same results with Firefox, IE, and Casimir FTP.

  I turned off, turned on, rebooted, changed the ports and everything else I can think.

  Here are the details of the ipconfig command:

  Microsoft Windows [Version 5.2.3790]
  Copyright (C) 1985-2003 Microsoft Corp.

  C:\Documents and Settings\Administrateur > ipconfig/all

  Windows IP configuration

  Name of the host...: topdog
  Suffix main Dns...: topdog.local
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: topdog.local
  KC. RR.com

  Ethernet connection to the Local Server network card:

  The connection-specific DNS suffix. : News:[email protected]
  ... Description: Intel(r) PRO/1000 MT Network Connection
  Physical address.... : 00-0C-F1-A4-82-50
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.1.101
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCP server...: 192.168.1.1.
  DNS servers...: 192.168.1.1.
  76.85.229.110
  76.85.229.111
  Lease obtained...: Saturday, June 4, 2011 16:54:48
  End of the lease...: Sunday, June 5, 2011 16:54:48

  C:\Documents and Settings\Administrateur >

  The office is a Dell Poweredge, NIC is an Intel Pro/1000MT (on the MB), OS is Win 2003 small Bus. Server

  Please, ask/offer away. I am at a total loss.

  Thank you!

  Jeff

  I installed a new gigabit NIC $ 30 and all is well. The old NIC is circa 2002-3.

  Thanks for trying!

  Jeff

• Unable to connect to the network and wireless interface does not appear in ipconfig/all on Vista32

  My niece has a laptop of HP under vista32 who cannot access the network wirelessly or wired.  She is in College and needs the laptop on the network as soon as possible for his class work.  I tried to reload the driver wireless driver (Atheros AR5007 b/g) and reset the tcp/ip stack using the command netsh addressed in the microsoft article, but nothing works.

  I brought the laptop to work where we have an unsecured wireless lan (called comments) for visitors and the laptop can go out and find all points of access wireless including comments.  When I select the comments and try to connect it times out and tells me to watch driver and tcp/ip connections.

  Another clue may be that the wireless card does not appear when I type ' ipconfig/all', or the adapter wireless and wired adapters are not displayed:

  C:\Users\Admin>ipconfig/all

  Windows IP configuration

  Name of the host...: Hannah-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Device Bluetooth (personal area network)
  Physical address.... : 00-21-86-39-EE-22
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  C:\Users\Admin >

  I'd appreciate any help I can get.

  Thank you!

  In the case where somone has this same question, I wanted to post my final resolution of the problem. I backed up its data and restored the laptop to factory default using HP restore and now everything works fine.  Better I would say loading Zone Alarm on Vista was a bad thing for my niece to do.  Would have been nice to find a magical solution to avoid restoring but never found one.  Even after the alarm zone using their instructions by removing completely, there was apparently a problem with the registry who wouldn't let networks are working properly.  One thing I noticed after that the restoration was the HP Wireless Assistant poped up and told me about available networks, etc.  Assistant wireless didn't pop-up at all whne the cell was dismantled so maybe assistant was broken?  Well, I'm out...

• Unable to connect to apple in new iPhone 6 s ID

  I saw recently a problem with the new iphone can't connect to itunes 6 s means it strucks on initial configuration page itself.

  I tried via wifi and 4 G cellular network. But always without success. Any idea?

  What do you mean exactly when you say you watched him. Is this not your phone.

• Unable to connect to the CLI as admin (collectorplugin and the root are disabled)

  I am trying to troubleshoot a problem described in https://supportforums.cisco.com/discussion/12927451/unable-login-cli-cspc download of inventory is a failure and I want to confirm that all Cisco servers are available and listed in the hosts file. When I try to open a CLI session as "admin", it shows the home page, the error of java and then returned to the connection. I have created the accounts collectorlogin and root during the initial set-up. Is it possible to activate these accounts now (from the web console, for example) or to resolve the problem with the w/o access CLI admin account? Thank you.

  It does not exist. Please re - deploy the EGGS. You can follow the steps here:

  https://supportforums.Cisco.com/blog/12696871/self-service-onboarding-setting-CSPC-25-collector

  Thank you

  Lynden

• Unable to connect to secure linksys WRT54GS2 V1 wireless router

  I just moved in with my friend and I'm unable to connect to linksys WRT54GS2 V1 wireless router.  My roommate can connect his computer laptop and desktop to the wireless router, but my iphone and the laptop cannot connect.  I tried both of my devices on a wireless network to a friend, and all both worked well.  We even changed AND removed the password and it won't let me log on to internet.  I went through the forumns and FAQS on the site, looking for suggestions.

  Thank you

  Are you MAC to your iphone and laptop addresses in the filter?