Unable to connect to eA4500 to Cisco in bridged mode

Similar Questions

• Unable to connect to the internet, except in safe mode

  I worked with the cable co and co wireless router and they said that I must have some settings on my computer that let me access the internet unless in safe mode.  It seemed to have happened right after that I tried to hang a new wireless router.  Once I followed the steps for the wireless router, I got a message that there is no internet connection.  I know that the modem works, because I can hard wire on my laptop and log in safe mode with network and be well.  There must be a setting that I did not find, but which must be modified to allow access to the internet the way "normal".  Anyone have any ideas?

  
  

• Unable to connect to the ftp to EA4500 usb storage device

  I am unable to connect to my hard drive on the EA4500 from a remote device (pc or mobile) using the ftp protocol.

  The drive is a WD 1 TB and is supported. I use cisco smartwifi to set it up. The player is accsessable on my local network, capable of map and data flow of the connected player on all LAN devices. I have ftp on and implement a file secured with username and password. I tried to connect with the "filter anonymous internet customers' on and outside. I have reset the router 3 - 4 times. Maybe im does not connect make properly. WiFi Smart Displays the FTP server: ftp: / / 172.30.1.19:21. Whenever I try to connect to 172.30.1.19 port 21 in a web browser or ftp program, I get "cannot find server message. I've read through the forums and have not been able to find a solution. Help, please. Thank you.

  So the fix for MY problem was just re-aranging my network would invest and the linksys as being the first unit WAN/LAN on the network of front loading.

• Unable to connect to the Cisco VPN you use native client: El Capitan

  I'm unable to connect to the Cisco VPN using native client server Cisco OSX via IPSec. Before the upgrade for connections VPN El Capitan has worked without any problems. VPN uses the shared secret of group. It seems, I get the error "raccoon [2580] ': could not send message vpn_control: Broken pipe ' during the connection."

  When I upgraded to El Capitan, VPN connection has stopped working. I tried to do the following:

  * connect using the old work VPN connection: without success

  Config: Hand [server address, account name],

  AUTH settings [shared secret, the Group name].

  Advanced [mode to use the passive FTP = TRUE]

  errors:

  "authd [124]: copy_rights: _server_authorize failed.

  "raccoon [2580]: could not send message vpn_control: Broken pipe"

  ...

  * Add new VPN connection using L2TP over IPSec: without success

  Config: Hand [server address, account name],

  Authentication settings [user authentication: password, identification of the Machine: Shared Secret].

  Advanced [send all traffic on the VPN = TRUE]

  errsors:

  "pppd [2616]: password not found in the system keychain.

  "authd [124]: copy_rights: _server_authorize failed.

  ...

  
  

  * Add new connection using Cisco via IPSec VPN: without success

  Main config: [server address, account name].

  AUTH settings [shared secret, the Group name].

  Advanced [mode to use the passive FTP = TRUE]

  errors:

  "authd [124]: copy_rights: _server_authorize failed.

  "raccoon [2580]: could not send message vpn_control: Broken pipe"

  VPN server is high and does not work and accepts connections, this problem is entirely on the client side.

  I. Journal of Console app existing/Legacy VPN connection:

  26/03/16 10:24:01, 000 syslogd [40]: sender ASL statistics

  26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: received an order to start SystemUIServer [2346]

  26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: changed to connecting status

  26/03/16 10:24:01, nesessionmanager 313 [2112]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:24:01, 316 nesessionmanager [2112]: phase 1 of the IPSec from.

  26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

  26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

  26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 339 [2580]: connection.

  26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:24:01, racoon 349 [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

  26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

  26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

  26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

  26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

  26/03/16 10:24:01, nesessionmanager 404 [2112]: phase 1 of the IPSec from.

  26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 405 [2580]: connection.

  26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:24:01, 407 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

  26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

  26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

  26/03/16 10:24:01, 463 raccoon [2580]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

  26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

  26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

  26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

  26/03/16 10:24:01, 463 raccoon [2580]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

  26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

  26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

  26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

  26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

  26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

  26/03/16 10:24:01, nesessionmanager 485 [2112]: IPSec asking extended authentication.

  [26/03/16 10:24:01, 494 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed by disconnecting

  26/03/16 10:24:01, 495 nesessionmanager [2112]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 495 [2580]: IKE Packet: forward the success. (Information message).

  26/03/16 10:24:01, racoon 495 [2580]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

  26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

  26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

  [26/03/16 10:24:01, 496 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed to offline, last stop reason no

  26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

  26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

  26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

  $VPN_SERVER_IP

  II. new VPN connection using L2TP over IPSec Console app log:

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetFillColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetStrokeColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextFillRects: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontAntialiasingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveTrackingHandler:-1856

  26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveReceiveHandler:-1856

  26/03/16 10:37:28, com.apple.xpc.launchd [1 393]: (com.apple.SystemUIServer.agent [2346]) Service was released due to the signal: Broken pipe: 13

  26/03/16 10:37:28, Spotlight 461 [459]: spot: logging agent

  26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

  26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

  26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: received an order to start com.apple.preference.network.re [2539]

  26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: changed to connecting status

  26/03/16 10:37:28, com.apple.SecurityServer [75 536]: rules of problem opening the file "/ etc/authorization ': no such file or directory

  26/03/16 10:37:28, com.apple.SecurityServer [75 536]: sandbox has denied authorizing the right "system.keychain.modify" customer "/ usr/libexec/nehelper" [184]

  26/03/16 10:37:28, 536 pppd [2616]: NetworkExtension is the controller

  26/03/16 10:37:28, 538 pppd [2616]: NetworkExtension is the controller

  26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: cannot copy content, returned SecKeychainItemCopyContent user interaction is not allowed.

  26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: SecKeychainItemFreeContent returned the user interaction is not allowed.

  26/03/16 10:37:28, 570 pppd [2616]: password not found in the system keychain

  26/03/16 10:37:28, 572 pppd [2616]: publish_entry SCDSet() failed: success!

  26/03/16 10:37:28, 573 pppd [2616]: publish_entry SCDSet() failed: success!

  26/03/16 10:37:28, 573 pppd [2616]: pppd 2.4.2 (Apple version 809.40.5) started by $VPN_SERVER_USER, uid 501

  26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

  26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceDisconnectedCallback

  26/03/16 10:37:28, authd 720 [124]: copy_rights: _server_authorize failed

  26/03/16 10:37:28, sandboxd 748 [120]: nehelper (184) ([184]) refuse the authorization-right-get system.keychain.modify

  III. New connection of Cisco VPN through IPSec Console app log:

  26/03/16 10:18:26, 917 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

  26/03/16 10:19:43, 975 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

  [26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: received an order to start SystemUIServer [2346]

  [26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: changed to connecting status

  26/03/16 10:19:56, nesessionmanager 267 [2112]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:19:56, nesessionmanager 270 [2112]: phase 1 of the IPSec from.

  26/03/16 10:19:56, authd 284 [124]: copy_rights: _server_authorize failed

  26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

  26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

  26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:19:56, racoon 296 [2576]: connection.

  26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:19:56, racoon 308 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

  26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

  26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

  26/03/16 10:19:56, nesessionmanager 352 [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

  26/03/16 10:19:56, nesessionmanager 353 [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

  26/03/16 10:19:56, nesessionmanager 373 [2112]: phase 1 of the IPSec from.

  26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

  26/03/16 10:19:56, 374 raccoon [2576]: connection.

  26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

  26/03/16 10:19:56, racoon 376 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

  26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

  26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

  26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

  26/03/16 10:19:56, racoon 432 [2576]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

  26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

  26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

  26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

  26/03/16 10:19:56, racoon 432 [2576]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

  26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

  26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

  26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

  26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

  26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

  26/03/16 10:19:56, 454 nesessionmanager [2112]: IPSec asking extended authentication.

  [26/03/16 10:19:56, nesessionmanager 464 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed by disconnecting

  26/03/16 10:19:56, nesessionmanager 464 [2112]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:19:56, racoon 465 [2576]: IKE Packet: forward the success. (Information message).

  26/03/16 10:19:56, racoon 465 [2576]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

  26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

  26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

  [26/03/16 10:19:56, nesessionmanager 465 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed to offline, last stop reason no

  26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

  26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

  26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

  26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

  It seems that I solved the problem, but I'm not sure it helped.

  After restart of the operating system, the two connections: old and new Cisco via IPSec connection, began to work.

• Unable to connect to network WPA2 with Windows 7 64-bit (Intel 4965 and Cisco WUSB600N)

  Connect to a WPA2 network seems to be a fairly common problem.  Again, I can't be able to find a solution.

  OS: Windows 7 Ultimate 64-bit

  Wireless adapter (s): Intel 4965AGN (integrated into Dell XPSM1330) and Cisco/Linksys WUSB600N

  Drivers: latest windows 7 64 bit drivers from the two websites of companies.  Intel (v12.4.1.4), Linksys (3.0.10.0)

  Network properties: WPA2 enterprise, encryption of the ACS, authentication EAP - P, several types of routers around the world

  History: has been able to use the same laptop with Vista32 on this network without any problem

  I can not connect to networks non - WPA WPA networks simply not.

  When you try to connect to my companies WPA2 network (at any of our locations around the world).

  Method #1:

  1. Select "Other network" in the list of network
  2. Enter the SSID of the network
  3. Windows could not connect to the SSID
  Method #2
  1. Open network and sharing Center
  2. Select set up a new connection or network
  3. Select manually connect to a wireless network
  4. Select one of my adapters
  5. Enter the SSID, as WPA2-Enterprise security type, type of encryption like AES, check the boxes to connect automatically and connect even if the network is not broadcasting
  6. An unexpected error has occurred

  Method #3: Try to trick windows

  1. Open network and sharing Center
  2. Select set up a new connection or network
  3. Select manually connect to a wireless network
  4. Select one of my adapters
  5. Enter the SSID but select an open network
  6. Adds the network
  7. Then try to change properties
  8. WPA2-Enterprise security type
  9. Set to AES encryption type
  10. "Choose a network authentication method:" drop-down menu is empty!
  11. Windows has encountered an error saving the wireless profile.  Specific error: the profile has an invalid length field.

  I'm pretty desperate for a solution.

  Kind regards

  John

  There are a few people with Win7 x 64 that cannot connect to WPA2 P/EAP Corporate/business networks and no solution?

  Come on, guys, it's the microsoft answers site! someone give me something! I have two asus laptops, both with network cards Intel having this problem on two networks separate enterprise (school).

  Edit:

  RESOLVED:

  Here's the thread of the resolution:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/unable-to-connect-to-company-wireless-network/3bcd12b1-A0D8-4357-bded-07da96259920?page=3

  The problem occurs when you perform a Wizard for easy transfer to a computer that was Symantec Endpoint Protection installed to one without him.

  Answer, copypasted:

  Inspect the key mentioned above - that is of HKLM\System\CurrentControlSet\services\RasMan\PPP\EAP.

  In each of the number keys look something like ConfigPathBackup and its corresponding ConfigPath - there are a number of them.

  For each, I deleted the original key (e.g., ConfigPath) and restored the original by renaming ConfigPathBackup to ConfigPath

  For each of them, the State is now restored to her pre State Symantec - each key pointed to a Symantec location that is no longer present and by restoring the path key backs up everything was fine

• Unable to connect to the Internet, the error message "Cisco AnyConnect VPN agent service is not responding. Please restart this application after a minute"

  Original title: unable to connect to the internet

  Whenever I connect to my computer and get it on my desk, it goes on to say that Cisco AnyConnect VPN Service not available. How can I fix? I am not connected to the internet and I can't connect to the internet as well. He said also Cisco AnyConnect VPN service agent is not an answer. Please restart this application after a minute. Also, I can't use my firewall for some reason, if I try to allow its loading and the greenbar's going that far - then stops and says that there is an error. I forgot where I tried to activate.

  Oh thanks for the help but I fix it myself. I just did a system restore to a month before

• EA6500 unable to connect to the router after Time Machine

  Just got an EA6500 - updated to the latest firmware available.

  I have attached 2 x WD NAS and 1 x WD through the USB port of the device.

  Each time after I finished running Time Machine on the MacBookPro (written to one of the WD NAS), I can no more connection to the router as neither the local IP, or the cisco connect cloud. The error message I get (loosely formulated) is: unable to connect to the router. Please ensure that the router is connected to the internet.

  At this point, all the devices connected to the router (wired and wireless) still can access Internet perfectly. Only the console of the router is therefore more accessible.

  Anyone else have the issue?

  Any ideas on how to solve it?

  Contact support for Cisco and the person advised me to do a factory reset (even if the router is new with no customization!). Regardless, it now works correctly. Cisco Cloud Connect works always before, during, and after a Time Machine.

  "When in doubt, try to turn the grid and the.

• EA3500 unable to connect USB printer

  I'm unable to connect to a printer using the USB port on my new Linksys EA3500 router.

  I followed the instructions here: Support Page , but my version of Cisco Connect not not the option "connect a USB printer»

  I'm on a macbook pro OSX 10.7.4 and my version of Cisco Connect is 1.4 (12005.2). Version of the firmware on my router is 1.0.30.126544. A screenshot of what I see after having clicked on "Add a device" in Cisco Connect is below. The printer is a HP DeskJet F4280.

  

  Please notify.

  Thank you.

  I began to question my purchase of this router, as it was rather costly unitl a mod contacted me and asked me to try to update my firmware again. This time, there was an update available installed tonight firmware Cisco Connect Cloud (version 1.1.38.138143) that I was able to connect my USB printer. I know that this sounds like a commercial of Cisco, but the Cloud Connect software and interface is amazing! It's a management tool complete recommended router on the web making it pretty useless old Cisco Connect.  Cisco thank you, I am happy that I now have a refreshed and awesome router! (which printed on my printer usb too)

• Unable to connect to network WPA2-Enterprise with Broadcom BCM4352HMB 802.11ac WiFi 2 x 2

  HP Envy 15 t-J100 using BCM4352HMB 802.11ac 2 x 2 WiFi driver version 6.30.223.221 on Windows 8.1 Pro 64-bit.

  I get an error trying to connect to my network wireless to work with "Unable to connect to this network." using WPA2-Enterprise authentication.

  The network appears in the list of available networks and the guests for my credentials (username & password), then it attempts to connect to it.

  A co-worker next to me has no problem with Win8.1, but has a 802.11n chipset (non - ac).

  I connect very well to my home network (802.11n) using the WEP protocols.

  I saw a post that might be one that this driver tries initially to connect with the COMPUTER instead of the USER name?  He suggested demotion to a Win7 64 bit, but I'm not find driver that I am willing to try.

  In the network configuration (802.1 x settings), I set myself to SPECIFY the MODE of AUTHENTICATION = "User authentication" without success.

  Solved the problem by installing the version of the driver 6.30.223.9 Win7-specific (sp64737).

  I can now connect to WPA2-Enterprise through Cisco Access Points.

  Driver is here:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D3%257CswItem%253Dob_126926_1%257CswEnvOID%253D%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Solution found in this post:

  http://h30434.www3.HP.com/T5/desktop-operating-systems-software-recovery/Windows-7-x64-envy-700-109cb-only-missing-2-drivers/TD-p/3352711

• Unable to connect to the network because the parameters of the computer do not match the requirements of the network.

  The main computer in my house is connected to the web via a modem to our ISP (Cox).  We use a Cisco's Linksys wireless router.  We have configured a new laptop to connect through the router yesterday.  Now my laptop, which had been the connection very well, can't access the network.  When I go in the "network and sharing Center" and pull up nearby wireless networks, our network shows is even more bars, just a red X.  Reads the error message "unable to connect to this network because the settings of that computer to match the parameters required network.»

  I don't know what has changed on our network, but I was unable to understand what these "required parameters" are, so I was unable to change the settings of my laptop to match the requirements.  Pls help.

  Hi Sharpdale,

  Step 1

  I first suggest you to perform network troubleshooting in Windows 7 and check if it finds problems, and if he is able to fix it.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Step 2

  Use Windows to configure wireless settings and check if it helps to solve the problem.

  a. click on Start menu and select run

  b. type ncpa.cpl, and then click OK to open the menu of the network connections.

  c. Select your Wi - Fi connection service and choose the option change settings of this connection.

  d. go to the wireless tab and select (tick) labeled use Windows to configure my wireless network

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect wireless, "ACS user exceeded max sessions" users

  Some corporate users are unable to connect to the wireless company.

  On the WLC, I get the following logs:

  Authentication failure AAA for UserName:dto029 user Type: USER WLAN

  The GBA, I get the error:

  Authentic doesn't have a default group for ACS user exceeded max sessions (by default) 192.168.47.46 DTO029......

  That means "user ACS exceeded max Sessions? How can I solve this problem? Connection problem faces few users, while others are able to connect.

  Corporate SSID, Session Timeout & Client Exclusion is not enabled. The WLC version is 7.0.98.0 and the version of the CSA 4.2.0.124

  The problem is solved the ACS is restarted. Is there a permanent solution?

  Thanks in advance.

  Hello

  the error means that the users belong to the ACS Group (or the user themselves) has a "max session" setting, as described here:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/Overvw.html#wp826493

  .. and the user exceeds this limit.

  ACS can indeed limit the number of concurrent sessions for the same user name; This counter is based on the RADIUS account management information received from the AAA client: the session counter is increased when receiving a 'Start' accounting and it is decreased when you receive a "Stop" on accounting package.

  ACS for a reason if any don't receive an Acct-Stop, it won't reduce the number of session, so it may happen that your users exceed the max concurrent sessions allowed indeed.

  You can check the active sessions on the "users" ACS report:

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.2/user/guide/LgsRpts.html#wp680304

  If you restart ACS, this info is reset, so everything will work again, as you say; as an alternative, you can also use the options 'Purge logged in users' on the logged users page, but it would be wiser to really solve this problem by checking if... :

  -do you really need the config of max sessions? Otherwise, you can simply disable this on users/groups configuration

  -If you need for this limitation and the problem is related to the session that overlap, which means that the WLC should not send the Acct-Stop because there is always a session active and a new one is created at the same time, you can consider increasing the number of maximum session.

  HTH,

  Federico

  --

  If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.

• Unable to connect to app store after iOS iphone 10 6 update

  Hello

  Since the upgrade to IOS 10 my iPhone 6 with stubbornly refuses to connect to the App store. The error message is "unable to connect to the app store, try again."

  The phone is connected to the internet (I can surf and send emails) by wifi. Turn off the wifi and the use of mobile (cellular) only link cause the same error. I also did a reboot hot and cold, without result.

  Any suggestions?

  Thank you

  Bill...

  ANSWER: this theme has the best 3 options. In my case, I had to sign out and in the app store of settings, iTunes and app store. Fixed

  PLE-3598048 http://www.Macworld.co.uk/How-to/iPhone/What-do-If-You-cant-connect-App-Store-AP.

• Just updated to IOS 10.0.2 and unable to connect using Store.Please App!

  Just updated to IOS 10.0.2 and unable to connect using Store.Please App!

  Harry

  Hello

  Go down to itunes apple ID page homepage remove ID, then reconnect again.

  See you soon

  Brian

• Unable to connect on the Messages or FaceTime after upgrading to Sierra

  Good afternoon! After upgrading my MacBook Pro (13-inch, mid 2010) to macOS Sierra (10.12.), I am unable to connect to Messages or FaceTime. They worked fine before the upgrade.

  • Messages: After entering my Apple ID and password, I get the message "Could not sign in iMessage." "Could not sign. Please check your network connection and try again. "or"an error has occurred during authentication. "My network is connected to the network (where this message), and the password is correct. Also, I have generated a password app specific to Messages. Enter just grew the message "your Apple ID or the password is incorrect." Messages is works well with my Google Talk and AIM accounts.
  • FaceTime: After entering my Apple ID and password, the engine just turns and it never connects me. Similarly, I have generated a password app specific but use it just gets the message, "your Apple ID or the password is incorrect."

  No idea how I can regain access to these applications? Thank you!

  Reached out to the Twitter account of Apple Support. He proposed to restart. It worked.

• Unable to connect to my yahoo home page after updating iOS

  Unable to connect to my yahoo home page after updating iOS 10

  Hello. Have you tried to remove data from the site under settings > Safari? Could you describe the problem a little more in detail? What happens when you go to the site? You get a login screen? It takes your input?