Unable to connect to gamezone.msn to play backgammon since reinstalled windows XP

Similar Questions

• Error code: 800ccc0e and the message "Unable to connect to the host server", when you set up Windows Mail to receive discussion group messages.

  I recently signed up for Windows Mail, Windows Vista Help. I have configured my Gmail OK account, but when I click TOOLS then Newsgroups I get the following error: unable to connect to the host server. When I click on show details, he said: Microsoft Community Server: msnews.microsoft.com Protocol: NNTP Port: 119 secure (SSL): 0 Code: 800ccc0e

  msnews. Microsoft.com has not existed for about three years now. MS close their news servers. You can still access newsgroups, but you will have to do with one another as eternal September or AIOE news server.
   
   

• Unable to connect to the internet after the system restore and Windows Installer (Vista)

  Hello

  I have recently restored the whole system on the HP to my sister a virus that I was unable to remove it manually.
  The system restore went well until it has reached the point where he was going to reinstall Windows. The computer just turned itself off and the software installation was not complete. I am able to reinstall again. I must therefore hold the CTRL + alt + delete, go to Task Manager, click on audit.exe and complete the process to turn on the computer. But I can't do anything with it in safe mode. The main problem is: I can't connect to the internet! Even if the network discovery is on it will not find my wireless network. What can I do on the internet? And is it possible to install Windows again without the CD?
  Thanks in advance!

  Hello

  ·        You are able to boot to the desktop in normal mode? If this isn't the case, then you get any code or message?

  ·        How did you did system restore?

  ·        Are you referring to the system recovery using the recovery partition or the drive?

  I suggest that you start in safe mode with network and check if you can access the internet?

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Note: select SafeMode with networking among the startup options.

  Respond with the required information so that we can help you further.

• Unable to connect my iPhone hotspot 5S for my computer in Windows 8.

  My iphone 5 s personal hotspot (wifi) can not connect to my computer laptop under windows 8 System. I bring my iphone & lap top to Apple Service Center. Apple uses a lot of iphone 5 & iphone 5 s personal hotspot also failed to connect to the wifi of my lap top. Apple has also to restore my iphone setting also can not connect. Apple take my iphone to connect another laptop or a PC with windows XP is no problem, cannot connect to wifi. After Apple said that is Windows 8 can not confrigration with the iphone. Ask me to contact Microsoft. Help, please.

  My version of the software: iOS 7.1.2 iPhone5 and Win 8.1 on Lenovo

  Today I feel like a genius. I've been struggling with this problem for over 4 months and none of the forums on MS or Apple have this properly resolved. The resolution I found is quite simple and stupid:

  On your iPhone, go to settings-> General-> about-> name

  Make sure the name of your phone is not a single word with number of the apostrophe or special characters. Make sure NO SPACES.

  If you change the name on the phone, just disable the personal Hotspot and turn it back on. Go to your laptop and now connect to the Hotspot IPhone with the new name.

  I wonder why Win8.1 is unable to use a device name that includes spaces. It is pretty stupid IMHO.

• Unable to connect to my new router cable, my XP and Windows 7 machines

  Vista, wireless router Netgear, no link, please help

  No matter what I try, I can't connect to my new router cable, my XP and Windows 7 machines work fine but the Vista laptop are it. Have searched the web, looked at this site and the forums, but nothing does not jump and helps me solve the problem. I use a HP Pavilion DV9000 laptop, all service packs updates and so forth... any ideas?

  I suggest that you contact your ISP and get their help in setting up the Vista machine so it connects properly.  They know the right settings for the access provider, while we do not have and that there may be something else you need to do with Vista which is different of the other two systems (and hopefullly the ISP will also know and be able to talk you through the process).  I call my ISP all the time and they are VERY useful and have ALWAYS resolved any problems, I called (even if sometimes he had a visit from a technician).

  If the ISP Can ' t/don't/can't help you, then after coming back here and we'll try to go through it step by step, even if we cannot have all the information we need.  But I am sure that they will be able to help you more quickly and more effectively and with greater chances of success.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Unable to connect to my MSN account

  I GOT THE SAME ACCOUNT OF MSN FOR YEARS. MESSENGER AND MSN LATLEY SAY MY PASSWORD IS WRONG. HE ALSO SAYS I TRIED MANY TIMES TO LOG IN. IT ALSO SAYS: MY ANSWER TO MY SECRET QUESTION IS BAD. IT IS THE PLACE OF MY BIRTH MOTHER. I KNOW WHERE SHE WAS BORN, SO I KNOW THAT IT IS RIGHT. I DON'T REMEMBER IF I'VE UPDATED MY PROFILE, BUT I USED TO DO. MSN AND MESSENGER STILL HAVE MY USERNAME BUT NOT MY PASSWORD. I TRIED EVERYTHING SAID TO CORRECT THE PROBLEM, BUT NOTHING WORKED. I DON'T KNOW WHAT TO DO. PLEASE, PLEASE HELP ME. I SIGNED UP WITH HOTMAIL AND HOPE TO HAVE MY PASSWORD SENT OVER THERE AND STILL NOTHING. I'M AT MY WITS END.

  Hello patriciabodley,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Pavilion 14-ab051tx N4G24PA: unable to connect to any wireless network after the upgrade to Windows 10

  I recently bought a 14-ab-51tx Pavilion N4G24PA, this is my first laptop from HP, it comes with Windows already installed 8.1 and it worked fine.

  The thing is, I kind of get used to using Windows 10 on my previous laptop, so without further hesitation I upgraded to 64-bit Windows 10.

  Here's what I did wrong:

  Instead of update Windows 8.1 for Windows 10, I indeliberately he installed fresh, with couple of mouse clicks, I didn't realize that I also remove the recovery partition.

  I realized only after the installation process is complete, but then it was too late. I look forward to using my laptop with Windows 10 freshly installed inside to make some games just noticed that I couldn't connect to any network without wire, House or public. It recognizes my wifi at home, but the signal bar is bizarre, there is only 1 bar of signal even if the wireless router is only about 10 feet from him, so I checked my other computers and smartphones, but the signal on them is ridiculously high (full bar), it also detects another wireless network that are further away than my wireless router.

  But back to my HP laptop, I tried to connect to my home network despite the signal bar with the right entry security key, but it does not connect, it says "Cannot connect to the network".

  Tried updating drivers with HP Support Assistant and no luck, the problem persists, tried all the solution on the internet, int ip reset, reset winsock, checking and unchecking, always without success.

  Can someone help me please...

  Hello:

  The BOM indicates that your laptop comes with a Broadcom wireless card.

  Have you tried the last W10 driver for this card to support your PC and driver page?

  This package contains the Broadcom Wireless LAN drivers for the laptop models running a supported operating system. Broadcom wireless LAN drivers are required to activate the built-in Broadcom wireless LAN adapter.

  Exit the: December 17, 2015

  Version 7.35.317.0 Rev.A

  File name: sp74241.exe

• Satellite L650 - unable to connect to the internet after the clean install of Windows 7

  Hi guys

  IM really angry because I just finished installing a new copy of w7 on my laptop (upgrade home pemium to proffesional) and now the ONLY way I can connect to the internet is via a usb device.

  I even tried ethernet and no luck.
  The screen display resolution is also mucked up.
  What can I do?

  Also reset it to factory settings make me reinstall it home premium?
  If so I'll do that but I need to know if this is the case, please

  its a PSK1JE L650 btw

  Post edited by: bilal98

  > I tried Ethernet and no luck.
  > The screen resolution is also mucked up.
  > What can I do?

  You must install the necessary drivers.
  For internet connection, you will need to install the LAN and WLan driver.
  To get the best display resolution install display driver

  > Also reseting it to the factory settings let me reinstall it home premium?
  > If so I'll do that but I need to know if it does, thank you

  Looks like you have already done this as posted here:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=68031

• Unable to connect to the internet with the NETWORK card and Windows Millennium Edition.

  Hello

  I turned on my old computer yesterday, who has installed Windows Millennium Edition. At the back of the computer is an Ethernet port which is marked as LIEN ACT. The NIC with this port is Realtek 8139 PCI Fast Internet Adapter. I spend two hours on the Internet configuration and I did and finally got connected, but then, a few hours after, something went wrong and the Internet and the NETWORK card has stopped working! And the card has disappeared from the Device Manager, but he's still showing in network in Control Panel. I opened the computer and I reconnected it to the slot, but it did not help. At the back of the computer next to this port are two LEDs - green indicates the power that lights up when I plug the Internet cable and the other orange indicates actual connection. But now these two LEDs are not indicating something even when I plugged in the cable to the Internet, which comes from my router. In the computer a Dial Up connection PCI is installed too, but I disabled it. I used Dial-Up in 2002. So, I need help.
  But I know that I can connect with this Ethernet card to the Internet because it worked for 3 hours, I've loaded the pages and downloaded programs.
  Please don't point, should I upgrade Windows!
  Thank you.

  Hi friend,
  You can try a Bing search on connectivity to Win ME, I don't know there are still a few old sites that are not taken down you will find a few FAQ on.
  I saw not a ME machine in too many years to count!
  Good luck on your adventure.
  B Eddie

• HP Media Center m1050e PC - unable to connect to the internet after upgrade from XP to Windows 7

  My desktop PC with Windows 7 will not connect internet after the transition from XP to Windows 7 Home Premium.  This necessary upgrade actually recording files and a new install of Windows 7.  When getting help from support of the router to load a new driver, I get an error message "Realtek network Contoller is not found".  They say it's a question that HP will help solve.  Can anyone help?

  You are the very welcome.

  You should be able to do.

  I think that the best thing to do would be to buy an external usb 10/100 LAN RJ-45 adapter.

  But, if you want to get an internal card, then you can get a PCI network adaper to enter one of the PCI slots available on the motherboard.

• Unable to connect a wireless printer with laptop computer since the reset wireless router

  I have a wireless HP C4580 printer that connects to my Acer Aspire laptop using windows 7. The two have worked together very well for months.  My wireless router stopped working a few days ago, so I had to unplug the device to make it work again is it.  But since then, I can't get my lap top to communicate with the printer now.
  I went all the problem of shooting and insured the printer is on line and set it as default printer. I even did a system restore, as suggested in the troubleshooting
  With the help of the program are the two messages that I get now troubleshooting
  1 that the C4500 series can be contacted via the network (this is the message that I had before the restoration also)
  2 the C4500 series is not shared with the homegroup

  All the tips are greatly appreciated in progressive simple language as possible as I am a bit useless with computers

  I assume that the printer is all first directly connected on the router, then the laptop?  Access the router and make sure that the printer is listed as a "wireless client" connection  If this isn't the case, you should probably restore the wireless "link" between the printer and the router then the printer should work.

• Unable to connect to internet wireless after the update to vista windows or anti-virus program change

  I can update Windows Vista, but then I can't connect to the internet. This also happens whenever I have download a new antivirus program (different) on my system. Restore the system to the point until the changes are made fix the connection problem.

  Any help would be great.

  Thank you

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistanetworking/threads

  "Connect to a network, mail and the Internet."

  They will help you with your question in the Vista Networking Forum above.

  See you soon.

  Mick Murphy - Microsoft partner

• Unable to connect my internet after installing a pirated copy of windows 7 ultimate

  Hey Himanshu Dogra,

  I have the same problem. I can't connect to my phones wifi hotspot after installing a pirated version of windows 7 ultimate 64-bit after you remove the original version. I read your previous answers. In my view, it would be useful for me also. My laptop is hp 4430 s ProoBook. Only the yellow markup in my device manager are the following: basic system, Bluetooth device, network controller device.

  The hardware ID are:

  Base system device:

  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C & REV_30
  PCI\VEN_197B & DEV_2392 & SUBSYS_167E103C
  PCI\VEN_197B & DEV_2392 & CC_088000
  PCI\VEN_197B & DEV_2392 & CC_0880

  Bluetooth Device device:

  BTHENUM\ {232e51d8-91ff-4c24-ac0f-9ee055da30a5} _VID & 00010006_PID & 0001
  BTHENUM\ {232e51d8-91ff-4c24-ac0f-9ee055da30a5} _LOCALMFG & 0002

  Network controller:

  PCI\VEN_8086 & DEV_0090 & SUBSYS_52118086 & REV_34
  PCI\VEN_8086 & DEV_0090 & SUBSYS_52118086
  PCI\VEN_8086 & DEV_0090 & CC_028000
  PCI\VEN_8086 & DEV_0090 & CC_0280

  It would be very kind of you, if you give me a valuable teaching and provide the download link above drivers missing.

  Hello

  I'm sorry, but no support is given for the pirated copies of Windows operating systems in the Microsoft Community.

  I suggest that looking for answers on the Web site that you have downloaded the Windows 7 hacked from.

  I suggest that contact you HP and order recovery media for your computer which they must provide for a fee, if Windows 7 was originally preinstalled on it.

  See you soon.

• Unable to connect to a printer Brother MFC - 240 c to Windows 7 computer network

  The computer of my network which is connected directly to the internet and my router is a computer running Windows Vista (32 bit). My computer is connected through the network to access the internet and the printer connected to the computer base. My computer was also under Vista and networking has worked well.

  I installed Windows 7 (64-bit, not by choice, done automatically) on my computer and now I can't connect to the printer on the Vista machine. I can access the internet (even if it is significantly slower than when I had vista) and on basic computer file sharing, but I can not configure the printer. The printer is a Brother MFC - 240 c
  If anyone can help it would be greatly appreciated.

  Thank you

  I'm assuming you get an error indicating that the print driver for 64-bit is not installed in the Vista machine.  You can either install a 64-bit driver that has the same name as the x 86 driver on the Win7 machine printing and reattempt the connection, install the 64-bit driver that has the same name on the Vista computer (for other 64-bit machines), but it's more difficult.

  Alternatively, you can set the machine to check Windows Update for a printer driver that has the same name as the 32-bit print driver.  If gpedit.mcs run for the version of Windows you have.
  Computer configuration
  Administrive models
  Printers
  Extend the point and print for windows update research connection

  If there is no matching driver name, you cannot make a RPC connection, but you can create an SMB connection.  Search for Local Port.  There are many posts on this.
  Alan Morris Windows printing team seek here Microsoft Knowledge Base: http://support.microsoft.com/search/Default.aspx?adv=1

• I'm unable to connect my smart fone of samsung Galaxy S2 to Windows 7 Professional 64 bit. Please suggest a work around

  Well, I have a problem with my Galaxy S2 with laptop (Windows 7 Professional 64 bit).
  It gives the following error.
  
  "Device driver software was not installed successfully.
  MTP USB device failed"
  When tried to install the driver manually, the detailed error was code 19 error with the registry entry. Yes I tried to delete the registry entry corresponding to the DPW Samsung device, it didn't always work
  
  It worked very well in another Windows 7 machine.

  Please suggest how to minimize this problem.

  NB: My fone running Android Ice Cream Sandwich

  Galaxy S2, comes with Samsung's Kies software.

  Install the Kies software on the software cd you need to have received when you purchased the galaxy s2.

  or download the latest kies from Samsung Web site. (http://www.samsung.com/us/kies/)

  Once installed, open the Kies application and connect your galaxy s2 to the laptop.