Problem installing Quicken software

Similar Questions

• Error "Windows has encountered a problem installing the software driver for your device." Windows found driver software for your device but encountered an error trying to install it.

  So I got a wireless mouse for my first time and it won't even install on my computer. It isn't the mouse because I tried other wireless mice and none of them work. In my device under other devices Manager there are only 2 USB receivers listed with question marks next to them. It is said that they can not find the drivers for the device. Then under my HIDDEN I tried to update the HID-compliant device and the USB input device, nor able to update. This is the message I get.  Windows encountered a problem installing the software driver for your device. Windows found driver software for your device but encountered an error trying to install it. Peripheral HID-compliant, the system cannot find the specified file. I already contacted EVGA about the issue, because there is where I got my motherboard, but they said to contact Microsoft and I didn't really want to pay 50 dollars to send them an email. That's all just ridiculous.

  Well, I found the solution, just in case anyone has the same problem.  Apparently some day caused Wireless does not work on several computers. So you go into Manager for all of these research and device drivers manually. Then, you look for in C/windows/winsxs. Then the wireless mouse/keyboard should work.

• Having problems installing of software and drivers for HP Deskjet 9800

  I uninstalled my HP Deskjet 9800 because I have too many problems with it. I use Windows XP.  I went to hp.com and download the software and drivers for this printer. The software and drivers simply go to my folder of the downloaded files. How can I install this software for my printer work? Any help would be greatly appreciated. Thank you, Patricia

  The downloaded file is a .zip or .exe.  Go to your download folder (right click on start > explore, click the Folders icon and navigate to your folder) and then double-click the downloaded file.

  If it is a .zip file, it will create a folder.  Inside this folder is going to be a setup.exe file - double click on it.

  If it's a .exe file, double-clicking on it to launch the installer.

• Problems installing the software and updates

  I ran Microsoft Fixit as some updates and the printer software will not install. As a result, "one or more components of Windows Update are configured incorrectly". I run XP on Dell 7 years. He seems to have lost the installation files. Can anyone help please? I can re - install the original XP disc?

  I ran Microsoft Fixit as some updates and the printer software will not install. As a result, "one or more components of Windows Update are configured incorrectly". I run XP on Dell 7 years. He seems to have lost the installation files. Can anyone help please? I can re - install the original XP disc?

  You can do a fresh install if you feel that this is necessary.

  You can try to go through this list as well...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in.  Look for whatever it is you do not know using Google (or ask here.)  You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory.  This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used.  Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need.  This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update:
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing you pouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end.  This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Having a problem installing the software for cable data usb for sagem myc5-3 laptop anyone can help

  I have a sagem myc5-3 laptop and recently bought a data usb cable to enable me to download pictures from my phone, but the software will not be installed correctly. I have windows Vista.

  Someone has an answer to this problem?

  Hello

  1. do you get any error code or error message?

  2. you have the driver software of the Sagem MY C5-3?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Temporarily disable the security software and check if it helps.

  Disable security software:

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Warning: If you need to temporarily disable the security software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2:

  Try the steps in the following article from Microsoft to install a program and check if it helps.

  Install a program: http://windows.microsoft.com/en-US/windows-vista/Install-a-program

  Also read the following article from Microsoft and check if it helps.

  Troubleshoot installing or uninstalling programs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-installing-or-uninstalling-programs

  Hope the information is useful.

• Windows encountered a problem installing the software driver for your device.

  My USB ports do not work. I need to get my documents and personal information off this computor before it crashes! I am running Microsoft Windows Vista - Home Premium Edition 32. HP Pavilion intel pentium.

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ======================================

  If nothing works on a PC onboard USB can be disabled and a plug-in software component USB card used
  that is not expensive. On a laptop, it would have a real computer (not the leeks and pics store
  at a BestBuy or other BigBox stores) or system manufacturer support.

  Also check with HP support and forums.

  HP support
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Problem installing the software

  I downloaded the Citrix software, but I couldn't install it in my system. It's show to see the error message on reader questions. Could you please provide resolution for this?

  Hi Rekha,

  I recommend you post the same question on Citrix forums, since we get this error message when connecting to the application. Maybe it's some parameters we have to do on Citrix application.

  Support forums: http://forums.citrix.com/support

  Keep us updated on the status of the issue.

• Problem installing new software

  I just bought a HP e9180t with Vista Home Premium 64 - bit installed in it, it was delivered two days ago.  Bear with me here, because I'm close to being a computer illiterate.  I bought this configuration oriented video because I like to keep my skills of drivers on the rise of flight simulators.  I went to install Microsoft Flight Simulator X and thought that I installed it successfully.  He went through all the startup routines, product registration, etc., and he asked me if I wanted to start it right then and there.  I did and he stole successfully.  After I stopped it, I went it to be reactivated and noticed that he had there no icon on the desktop.  As it was not listed under "all programs" when the Start button has been pressed.  I then opened the function remove programs in the control panel and it's there.  That tells me that the program is installed in the computer.

  I need the gifted people in Vista to tell me why there is no icon, and the program is not listed.  Right now, I can't run the program.  FWIW, I was able to successfully download Google Earth and the icon came with it.  He started very well.

  Annother problem that may be related to this is that when I try to open the enamel .wmv files, I get a box that says one or more codecs is missing and the Windows Media Player cannot play this video.  This was happening with my old computer (I thought it was just something wrong with this computer) but it should not happen certainly not with the new.

  I appreciate the responses that I receive and thank you in advance.

  TF

  try to reinstall your microsoft X Flight Simulator...

  and for the missing codec, click the link below and download the file, save it to your desktop and run the installation by opening... It's easy as 1 2 3... its a codec for vista... He plays all video formats...

  http://www.free-codecs.com/vista_codec_package_download.htm

  I hope this helps... say thank you by clicking on the star...

• When you try to install Quicken 2012 on my laptap receive a "Setup.exe has encountered a problem and needs to close." Have tried a number of corrections suggested by the seller, but no luck.

  Uninstalling an older version of Quicken and all of its subfolders, used a utility of Quicken for clean system, deleted and reinstalled all .net platforms, tried installing using a user admin account and used the two install mode selective and secure, all with the same results. Seller now claims it's an operating system error, but I can not find similar problems in the forums.

  Sorry, that I have no more insight to the problem install Quicken otherwise than to post in the forum of Quicken, be sure to include things that you've already tried.

  As the msconfig error message is concerned, it's probably not related.  There is a service (IIRC, HP PML driver; see http://www.pchell.com/support/msconfig_access_denied_error.shtml) which causes this error message.

• Impossible to install the software to receive error message like "16-bit MS-DOS subsystem config.nt msiexec.exe file system not suitable for running MS-DOS and Microsoft Applications."

  Hello

  Original title: problem installing the software
   
  When my wife tries to install software (for example the updates of Windows or Itunes) on his Dell laptop (Windows Vista Home Premium), she gets this error developed box.
  "the 16-bit MS-DOS subsystem
  The msiexec.exe config.nt file this system is not suitable for running MS-DOS and Microsoft Applications. »
  Grateful for any ideas on how to fix this problem!

  Hello

  1. what 16-bit or software program you try to run? Should I use the CD Rom drive?

  2 - is the question also appear during the installation of Windows updates?

  3. have you made changes on the computer before this problem?

  Follow the methods and check them out below:

  Method 1: Perform a clean boot and check.

   

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Please note:  After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2:

  Run an analysis of auditor of system files on your computer and check for the issue.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall

  Hope the above information is helpful.

• How to make El Capitan to recognize my Canon printer I've done what I think is everything: one clean install of El Capitan (another problem); Reinstall the software from the CD; Anon same impression reset. No luck at all.

  How do El Capitan to recognize my Canon printer? I did what I think, that's all I can: clean install of El Capitan (another problem); Reinstall the software of Canon from the CD; same impression reset - my printer shows not yet up! I tried LAN and USB.  No luck at all. The printer does not yet appear upward on the tree of USB in the reporting system.

  What printer model Canon...?

  kologano wrote:

  The printer does not yet appear upward on the tree of USB in the reporting system.

  This looks more like a bad USB cable or bad printer.

• Problem installing software for all-in-one Deskjet F4210

  Hello.

  I have a problem when you install the software for my HP Deskjet F4210 all-in-One printer.

  First of all:

  • I am running Windows Vista Home Premium x 64.
  • I tried the 3 installation methods:

  (1) installation CD.
  (2) installation of downloadable x 64 Installer.

  (3) installation of downloadable x 32 Installer.

  I get the same error message (series) at each facility.

  I also tried each method of installation mode execution "Run As Administrator". Which is not exactly change the result.

  Just to try, I tried to install it on Windows XP, and it has worked very well with no error message.

  I don't know what the problem is, but I have screenshots with legends and a comment by each (to me) that explain everything.

  * Note: You can click ON the picture to SkyDrive show in its own window.

  Images:

  1) HP Installer screenshot 1

  2) HP Installer screenshot 2

  3) HP Installer screenshot 3

  4) Setup HP 4 screenshot

  If anyone can help, please do.

  I really hope that these screenshots can be useful.

  They are in order of appearance.

  Twitter: @mgarcher007
  
  My rig: HP Pavilion a6645f Special Edition: Verde.
  CPU: AMD Athlon 64 x 2 4850e @ 2.50 GHz
  RAM: 5.00 GB DDR2 800 MHz
  HDD1: 500 GB Seagate Barracuda, 32 MB cache
  HDD2: 1.5 TB Western Digital Caviar Green, 64 MB cache
  Optics 1: HL DVD-RAM
  Perspective 2: Pioneer BD-R/DVD-RW
  Graphics card: Single EVGA GeForce GTX 260 896 MB 448 - bit GDDR3 PCIe 2.0 (Yes, the card just fits, I have only one other device PCIe [a HDMI intensity Pro capture card] and I can't even keep the side panel of the computer, because the card sticks out.) I'm working on a mod for that matter).
  PSU: Ultra x 4 850w modular; SLI and CrossFire ready
  Various: Intensity Pro (HDMI capture card) for the capture of Xbox 360 and PS3 game and making game vids/fixtures.

  Hello

  You use Internet Explorer version 8? If so, uninstall Internet Explorer version 8, and then try reinstalling sw of the printer driver. You can reinstall Internet Explorer version 8 after you have reinstalled successfully the sw of the printer driver.

  

  Kiko

• Problem installing software in FPGA

  Hello

  I bought an FPGA (9074).

  Following the help to get it runing it says I need to install the software using MAX.

  The device was found in MAX, the network configuration works.

  Right click on 'software '? "" remote systems "to add the basic software for operating the unit.

  I only get the first option (OR-RIO 3.1.0 minimal, January 2009), the others are grayed out, so he ends up with not a lot of functions in Labview to develop my program, I have no serial communication or the PID function for example.

  I'm using Labview 8.6.1.

  I have the module 9263 (analog output) and his work very well with the 9074.

  What should I do to be able to install a more complete set of software outside the minimum?

  Sandro

  Problem solved, any new, OR just last installed device driver.

  Thanks for the reply.

• Found that this problem was due to windows being disabled "Wireless Zero Configuration" service. Found this automatic setting and then by installing the software corrected the problem.

  How to get through this process of changing windows 'Wireless Zero Configuration' service is disabled.  Found this automatic setting and then by installing the software corrected the problem.

  Hi Joseph,.

  1 are you always face the question or the issue are already fixed?

  2 Windows operating system you are using?

  If you still experience the problem, you can follow this link completely and check if the problem persists.

  In the Windows wireless network connection problems

  You can also read the following article and check.

  How can I disable wireless configuration and enable Windows XP Wireless Auto Configuration services

• Problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription) "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security /...

  Original title: problem installing Webroot for MSN (part of the Internet software of MSN Premium subscription)

  Try installing Webroot to MSN but when I run the installer, I get "error 5: access is denied" and "Setup could not create the directory"C:; Program Files/Webroot/security/current/plugins/antimalware/Backup ". OS is XP with Service Pack 3. I tried to delete my existing Webroot program and turning to the bottom/off other security options... Any suggestions? Thank you.

  Thanks for the reply. I was able to finally get the new Webroot program to install after running a Microsoft Fix affecting the directory uninstall the old prgm Webroot and meets a new error code (1603), which led me to this site to permissions Grant full control to the SYSTEM account.

  http://support.Microsoft.com/kb/834484