Unable to connect to the modem of Iball with SIM in my laptop

Similar Questions

• I am unable to connect to the Linksys WRT54G Router with wired connection to Office XP.

  My two laptops (XP and a Win7) will be connected to the router wireless and wired (ethernet). When it is plugged directly into the DSL modem, the Office connects and works very well. This problem started when I had to replace the DSL modem.

  I inherited this problem for my elderly mother... and it all started because they gave me the router password wrong, who now works (router has been reset) on two laptops, but when connected, the Office doesn't even show a light of connection on the router except during startup. I no longer get a window of logon passwork for the router, and I am unable to connect/ping the router in the office. (192.168.1.1)

  I would like to clarify a few things.

  1. two laptops work fine with cable connections and wireless through the WRT54G.

  2 desktop PC, which has only a wired connection, does not connect successfully.

  3. the symptoms of the failure of the desktop connection to are that the link on the router at the start light flashes during initialization of the PC but then will Dim.

  4. when the desktop PC trying to connect to the internet, it fails.

  5 when the desktop PC try to connect to the administration WRT54g page it fails.

  6. when the desktop computer try PIING the router at 192.168.1.1 IP address it fails.

  These points are correct?

  Assuming this is correct, open a command prompt and type

  IPCONFIG/ALL

  The output of the command should provide some information about the current state of the network connection.

  It would be useful that you posted this here release.

  The absence of a link light can be your main symptom and may be due to several reasons. He probably has an associate status "media disconnected" in IPCONFIG for the network connection.

  This could be caused by a bad network cable or a network connection disabled in the properties of the network on the PC. Small jets knowing the ot IPCONFIG output is would help more.

  Post this info if you can.

  Good luck

• G60 - 228CA: unable to connect to the Linksys E2500 router with laptop G60

  Hello

  I hope someone can help because I've been through the forums and I will have no chance to solve my problem.  I bought a new router (Linksys E2500) and my laptop (G60 - 228 CA) HP can detect the router but just failed to connect to the internet.

  I tried to diagnose all the problems which have been proposed, but that did not help.  I restarted the router, nothing helps.  I tried to download and install a new driver to replace the old (Atheros AR5007 802. 11 b / g WiFi Adapter) but still had no luck.

  Really not sure where go from here so looking for help solve this problem.

  Thank you

  Hello:

  Verify that the driver you have installed is actually that of 2011.

  If not, go to the device, right click on the atheros wireless card, Manager select uninstall and if there is a box to uninstall driver for check, check.

  Reboot and try the driver I posted again.

  If the date and the driver version is what is indicated on the driver file, then unfortunately, I don't have any other suggestions for you to try.

• Unable to connect to the Agent to push with my credentials in the project PushCollector 10.1.

  Hi all!

  I am trying to create a client application to push to go with my project that I am creating a customer and am trying to learn how the PushCollector 10.1 functions to do this. I seem to have a problem, however, where the application may not be able to connect to the Agent to push after entering my credentials sent by the Services of Blackberry Push team showing.

  I logged into my account to make sure it is active and it is and have re-joined the AppID and the PPG URL 8 times literally!

  What I read I don't need to change anything in the file bar.xml for the PushCollector, but maybe I missed something.

  Can someone help me please?

  Thanks for your time,

  Rob

  Push requires a real device, so I think you have to find the cause of the problem.

• Unable to connect to the printer - operation failed with error 0X0000003b

  When I search a printer in my local network and connect, the message "Operation failed with 0X0000003b error" always appear.

  Hello

  Run the Microsoft fixit from http://support.microsoft.com/mats/printing_problems/en-us

  Also, follow the steps in http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/0x0000003b-on-printer-install-error-i-cannot/3b5a2538-1fde-4793-b16d-c61ca0999569?msgId=e0331f31-f29c-41e0-bdda-558f654c1053

  Hope this could help you. Let us know the results.

• Unable to connect to the console of administration with devulcanization account

  I returned the account admin console on a new media server configuration 4 and it won't let me connect or connect using the login "admin"?   It affects the password some defect?  This is all new to me because it's my first installation of this server.

  How to create a new admin connection?

  How can I change my login?

  
  Help!

  Thanks, Tandrist

  There is a configuration file with name fms.ini , you can find in the flash media server--> conf(c drive). You can set your user name and the passwor there.

• CD player will not read the CD. Cannot download and install anything. Unable to connect to the modem 0 x 81000202

  Original title:

  marthoella

  error ox81000202

  cant get connected modem and the sound is turned off cannot connect either

  Hello

  Installer Windows may stop working when the Windows Installer Service is not running. Please provide us with the following information as well.

  (1) what is the brand and model of your computer?

  (2) don't you make changes to the computer before this problem?

  (3) where do you see the red X?

  Please provide the Event Viewer logs in time when you get the Windows Installer error. The event viewer is an advanced tool that displays detailed information about important events on your computer. It can be useful when troubleshooting problems and errors with Windows and other programs.

  Open event viewer

  http://Windows.Microsoft.com/en-us/Windows/Open-event-viewer#1TC=Windows-7

  Click application log. Select the first event in the log, and then use the arrow keys to scroll down. Most of your event will be information. Maybe you will see yellow warnings or errors in red. If you see a red error, you can double-click on it to bring it and copy the contents into a document. Copy the complete error message and paste it, so we check the full error message.

  Make sure that the Windows Installer Service is running, follow the steps in method 2 from the link given below.

  Error "Could access the Windows Installer Service" when you try to install a program in Windows 7 or Windows Vista

  https://support.Microsoft.com/kb/2642495?WA=wsignin1.0

  Thank you to write to us with the screenshot of the red X mark. Follow the steps below.

  How to include a screenshot in your message

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-windows_programs/how-to-include-a-screenshot-in-your-post/2594b08e-32a3-476A-85A6-b021181be7e4

  Write us with the details asked.

• Unable to connect to the netgear to my computer wireless router dell laptop.

  I use to be able to connect wireless, but now I can't, we have a computer hp laptop, and it always connects ok and shows the other networks is available, I went through all the steps to get out of boredom and the computer tells me to serch for updates the problem can any one help? I use a computer dell laptop with vista bought as a package of pc world

  r Ellis,
  Thank you for visiting the Microsoft Answers community forum.

  If cela used to work, but the fact now, you can try to do a system restore back before the problem started.
  To restore the operating system to an earlier point in time, follow these steps:
  Click Start, type system restore in the search box, and then click System Restore in the list programs.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  In the System Restore dialog box, click on choose a different restore point and then click Next.
  In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  Click Finish.
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  What happens when you try to connect - the computer see the router but not connect or not he sees the router at all?  Your wireless card still appears upward and it shows the available networks?  Depending on the answers to these questions, it could be a number of different things, so we have to know what that is and can't.  It could be that anything the wireles adapter has stopped working, the need of drivers update, interference, etc..  Let us know if the adapter is working or not and he sees to all networks or not, and we'll go from there.

  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect via the wireless router "problem with wireless adapter or access point" _

  Hello

  I recently replaced my old Toshiba laptop with a new model of Toshiba Satellite L500/033HNX, it installed Windows 7.

  The problem is that I can't connect to my wireless network. I am currently connected via Ethernet cable to my Linksys router.

  I had help from my internet service provider, the installation correctly the problem not because of the connection.

  I had a Linksys online support, the router is a wireless, model - WAG54G ADSL gateway, is not the problem of all the correct settings and other devices can connect via my wireless network. I ran Dr. connectivity several times and it is always impossible to connect, "problem with the wireless adapter or access point.

  OK, you're my next hope to solve the problem can you HELP Please!

  Hi, JoelbX
  I want to thank very you much for your support and effort do to help me solve this problem, but we receive have been, and I don't want to waste any more of your valuable time, so I am the son of closing and deleting of Tring in Microsoft Answers.
  All the best
  Tring

• HP Envy Notebook dv6: unable to connect to the proxy server

  I saw an error message "Unable to connect to the proxy server" when I try to connect to the internet via WIFI, even if the label shows who is connected to my home router.

  HR63 wrote:
  

  Thanks for the tip, there is so much information, the laptop with this problem belongs to my daughter and because she doesn't have an internet connection (can not download anything), there is another way to fix it?

  I don't know because the online is where most of the instructions are locate in. I copy and paste the links here, but unless you can print them out or print the online pages it becomes hard, but here are the parts of the txt of it. +

  http://malwaretips.com/blogs/unable-to-connect-to-the-proxy-server-removal/

  How to remove "Unable to connect to the proxy server" (Virus Removal Guide)

  This page is a comprehensive guide, which will remove "Unable to connect to the proxy server" virus from your computer and any other adware program that may have been installed during the installation process.
  Please complete all of the steps in the correct order. If you have any questions or doubts in any point, STOP and ask for our assistance.
  STEP 1: restore the default proxy to your machine settings
  STEP 2: remove failed to connect to the ad software proxy server from Internet Explorer, Firefox and Google Chrome with AdwCleaner
  STEP 3: delete impossible to connect to the proxy server with Junkware Removal Tool browser hijacker
  STEP 4: delete impossible to connect to the virus pop up server proxy with Malwarebytes Anti-Malware free
  STEP 5: check a second time for the "unable to connect to the proxy server" malware with HitmanPro
  (Optional) STEP 6: delete impossible to connect to the proxy server of Internet Explorer, Firefox and Google Chrome ads

  http://www.geckoandfly.com/9275/Internet-connection-error-unable-to-connect-to-the-proxy-server/

  It is with IE

  Step 1 - launch Internet Explorer

  Step 2 - Click the icon "but" it looks like a gear wheel...

  Step 3 - select 'Internet Options '.

  Step 4 - Select the 'connection '.

  Step 5 - Click Lan settings

  Step 6 - uncheck "use a proxy server for your LAN (these settings may not apply to dial-up or VPN connections)."

  Step 7 - click 'Ok' to save the changes

  If you are using a proxy server, check your proxy settings, or check with your network administrator to make sure that the proxy server is running. If you don't believe that you should use a proxy server. Here's a video tutorial:

  Also, if you can since I don't remember which browser your help that gave you this message that I had to go with IE as a default.

• I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  network cable unplugged wiundows xp

  I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  Hello Verashanley

  Since how long did begin?
  You have added a new software or hardware to the system?
  If the issue took place recently then you can try the system restore.
  How to perform system restore in Windows XP.
  If you have recently added anything to the system (hardware or software), then remove.
  If the system restore does not then check in Device Manager and verify that the network card is considered and no errors appear.
  To open Device Manager, click Start, and then click Control Panel. Click performance and Maintenanceand then click System. In the hardware tab, click Device Manager.
  Check the type of network card you have and that you try to update the drivers from the hardware manufactures Web site.
  Also, check the connection for the network adapter. Do you see any physical damage. When you plug the NIC saw all the lights on the network card lights up? If not, then you can deal with a hardware problem and need to contact the manufacture of the system and see about obtaining the card replaced.
  Let me know the results. Thank you.

• Unable to connect to the internet: "Fail to create the RasEntry" or "Invalid Data Modem.

  Unable to connect to the internetwhen using a 3 USB Modem Mobile. Error messages on screen came "Failed to create RasEntry" or "Invalid Data Modem.

  I can't connect to the internet from my laptop (Windows Vista) using a usb modem mobile 3.  Error messages on screen came "Failed to create RasEntry" or "Invalid Data Modem. 3 mobile say they are unable to help me! Any help to solve the problem would be appreciated.

  You need to go to the services and make sure that 2 of them are started:
  -telephony
  -Remote Access Manager (or what is called similar)

  Properties, replace the manual start and apply the changes
  It worked for me on Windows XP machine
  http://www.techsupportforum.com/forums/F135/failed-to-create-RAS-entry-159946.html

• Unable to connect to the server of the modem.

  Hi guys, I have a major problem.

  Whenever I connect to internet with my modem, it works. But, when I connect to internet with my router and modem, I can not connect. But I solved my problem by resetting both, my wireless router and modem. Then after I have my wireless router reconfigure everything I have to do is Connect Server from my modem. But I can't connect to the server of the modem. I am tired of connect with 'admin' (that is, the password), but I can't always connect to it.

  I use: Verizon Broadband Network

  Model of ultra RangePlus Wireless - N Broadband Router: WRT160N

  Model of Westell 6100 modem

  What is the problem? Everyone knows about this problem before?

  You won't be able to connect to the modem, as long as the router is plugged

  You must configure the modem first to fill mode, and then connect the router and you connect to it

  1.) disconnect the router and have only the modem

  go to 192.168.1.1 enter

  This will take you into the verizon modem / if you have reset the modem then your username is; Admin

  your password; password

  Once you lopg in what it will ask you to change the name of user and password

  Just type ADMIN in all 3 areas

  now that you are connected to the modem. Access the network at the top, then network connections on the left, broadband connection, you will then put your Protocol on bridge deck / routed.

  now go to the top wireless settings and make sure wireless is enabled

  you have the option to set up a security key on basic security settings

  Once your modem resets then plug your router, you are now in bridge mode and moved modems connect to your router.  You must restart the modem and the computer just to be taken into account...

  also, make sure and update your list of network on your laptop

  I hope this works

• Satellite Pro A10 - WXP re-installed and unable to connect to the internet

  Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
  I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
  1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
  They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!

  My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...

  Would appreciate any help...
  Thank you

  Hello

  Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

  Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10

  > / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video

  Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.

• Satellite Pro L510 - unable to connect to the Internet

  Hi, a newbie on this forum so here goes. I got the "fix Windows 7" virus on my laptop because my virus protection that flows. I downloaded AVG which solved some problems, but still not back to the original values. I reloaded Windows 7, but of course I lost all the software preloaded Toshiba & now cannot connect to the internet (laptop computer purchased through the catch of the day).

  What I need to download software/drivers toshiba etc. to address this problem. Thanks for any input.

  Hello

  > now unable to connect to the internet
  Can you write more than one sentence about your problem?

  Does anyone know how you connect to the Internet via modem, LAN or WLAN? More exactly, what happens if you want to connect, you an error message or probably t can find the router?

  Sorry, but without this information there s no end of discussion