Unable to connect to the signal response AsyncDataAccess

Hello.

I am quite new to OS10 and QML and cannot understand why cannot connect to this particular signal. The code is as follows:

        m_async_access = new AsyncDataAccess(m_provider);

        bool res = connect(m_async_access,
                SIGNAL(reply(const DataAccessReply&)),
                this,
                SLOT(onReply(const DataAccessReply&)));

classy, solt is defined within the resembles

    class FSListDataModel: public ArrayDataModel
    {
        Q_OBJECT

        IProvider *m_provider;
        AsyncDataAccess *m_async_access;
    public:
        FSListDataModel(IProvider *provider, QString rootPath);
        virtual ~FSListDataModel();

        // @override ArrayDataModel item type
        virtual QString itemType(const QVariantList &indexPath);

public slots:
        // onReply
        void onReply(const DataAccessReply &replyData);

    };

What bothers me even more is that no message is printed to the console, while I read on the Internet, it must.

Thanks for any help!

Welcome on the support forums.

one idea would be to check if you use namespace bb::data, otherwise you would have to add to all occurrences, as written in the API:
cancel response (const bb::data :ataAccessReply & replyData)

Tags: BlackBerry Developers

Similar Questions

  • Firefox said it is unable to connect to the net but IE and the signal is strong

    Firefox has been great until this afternoon. Then all of a sudden it gave me an error message that he was "unable to connect." "" The laptop thinks it entirely connected wireless to the Homehub. I have been in contact with BT that kept me in line with IE and say that the problem is with Firefox. I uninstalled and reinstalled Firefox and I'm still getting the message that it is unable to connect. Help, please!
    PS Firefox works perfectly on my desk.

    One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

  • Unable to connect to the generator signal with LabView

    Hello

    I use a Tektronix AFG 3021 B signal generator. I installed the National Instruments driver (tkafg3k) for this device. My computer is connected to the signal in the block diagram generator, I place a block called "Example - Getting Started vi". I run the vi (there is no need of connections, so the vi has just the one block).

    The vi then gives me this error:

    Error 1073807343 has occurred to be initialized with Options.vi of tkafg3k
     

    Possible reasons:

    Driver status: (Hex 0xBFFF0011) primary error: error (Hex 0xBFFF0011) - information on the inadequate location or a resource that is not present in the system

    I know that the signal generator properly communicating with the computer because when I run "VISA Resource Manager", I can ask for the name of the device and it returns the correct name.

    -I'm using Labview 8.6.

    -I have NI-VISA installed 4.2

    -The driver that I use is available here: http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=005994E37F5B2318E0440003BA7CCD...

    -J' use the driver that is for version 7.1

    -J' uses this compliance record: http://joule.ni.com/nidu/cds/view/p/id/1095/lang/en

    What is the cause of this error and how can I solve this problem?

    Thank you.

    -Zach

    Do you really need to use the IVI driver, or you can use the LabVIEW driver? If you have need of IVI, configure you the Max with a logical name, etc.

    PS You have posted to the wrong Board. It is for the signal generators of NOR. You should have posted to the Instrument of narcotics control.

  • Unable to connect to the Cisco VPN you use native client: El Capitan

    I'm unable to connect to the Cisco VPN using native client server Cisco OSX via IPSec. Before the upgrade for connections VPN El Capitan has worked without any problems. VPN uses the shared secret of group. It seems, I get the error "raccoon [2580] ': could not send message vpn_control: Broken pipe ' during the connection."

    When I upgraded to El Capitan, VPN connection has stopped working. I tried to do the following:

    * connect using the old work VPN connection: without success

    Config: Hand [server address, account name],

    AUTH settings [shared secret, the Group name].

    Advanced [mode to use the passive FTP = TRUE]

    errors:

    "authd [124]: copy_rights: _server_authorize failed.

    "raccoon [2580]: could not send message vpn_control: Broken pipe"

    ...

    * Add new VPN connection using L2TP over IPSec: without success

    Config: Hand [server address, account name],

    Authentication settings [user authentication: password, identification of the Machine: Shared Secret].

    Advanced [send all traffic on the VPN = TRUE]

    errsors:

    "pppd [2616]: password not found in the system keychain.

    "authd [124]: copy_rights: _server_authorize failed.

    ...


    * Add new connection using Cisco via IPSec VPN: without success

    Main config: [server address, account name].

    AUTH settings [shared secret, the Group name].

    Advanced [mode to use the passive FTP = TRUE]

    errors:

    "authd [124]: copy_rights: _server_authorize failed.

    "raccoon [2580]: could not send message vpn_control: Broken pipe"

    VPN server is high and does not work and accepts connections, this problem is entirely on the client side.

    I. Journal of Console app existing/Legacy VPN connection:

    26/03/16 10:24:01, 000 syslogd [40]: sender ASL statistics

    26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: received an order to start SystemUIServer [2346]

    26/03/16 10:24:01, nesessionmanager 311 [2112]: NESMLegacySession [VPN_CONN_NAME$: B7816CCC-2D2C-4D6D - 83 D 9-B2C8B6EB8589]: changed to connecting status

    26/03/16 10:24:01, nesessionmanager 313 [2112]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, 316 nesessionmanager [2112]: phase 1 of the IPSec from.

    26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

    26/03/16 10:24:01, racoon 338 [2580]: agreed to the takeover of vpn connection.

    26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 339 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 339 [2580]: connection.

    26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, racoon 339 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, racoon 349 [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, racoon 350 [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:24:01, racoon 381 [2580]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

    26/03/16 10:24:01, 381 nesessionmanager [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

    26/03/16 10:24:01, nesessionmanager 404 [2112]: phase 1 of the IPSec from.

    26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 404 [2580]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 405 [2580]: connection.

    26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, racoon 405 [2580]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:24:01, 407 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, 407 raccoon [2580]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

    26/03/16 10:24:01, racoon 436 [2580]: port 62465 anticipated, but 0

    26/03/16 10:24:01, 463 raccoon [2580]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

    26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:24:01, 463 raccoon [2580]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

    26/03/16 10:24:01, 463 raccoon [2580]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

    26/03/16 10:24:01, 463 raccoon [2580]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

    26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:24:01, 463 raccoon [2580]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

    26/03/16 10:24:01, 484 raccoon [2580]: IPSec Extended requested authentication.

    26/03/16 10:24:01, nesessionmanager 485 [2112]: IPSec asking extended authentication.

    [26/03/16 10:24:01, 494 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed by disconnecting

    26/03/16 10:24:01, 495 nesessionmanager [2112]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 495 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 495 [2580]: IKE Packet: forward the success. (Information message).

    26/03/16 10:24:01, racoon 495 [2580]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

    26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

    26/03/16 10:24:01, racoon 495 [2580]: could not send message vpn_control: Broken pipe

    [26/03/16 10:24:01, 496 nesessionmanager [2112]: NESMLegacySession[$VPN-CONN-NAME:B7816CCC-2D2C-4D6D-83D9-B2C8B6EB8589]: status changed to offline, last stop reason no

    26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:24:01, racoon 496 [2580]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:24:01, racoon 496 [2580]: IPSec disconnection from the server $VPN_SERVER_IP

    $VPN_SERVER_IP

    II. new VPN connection using L2TP over IPSec Console app log:

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetFillColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetStrokeColorWithColor: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextFillRects: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 293 com.apple.preference.network.remoteservice [2539]: CGContextGetFontAntialiasingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetShouldSmoothFonts: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextGetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, 294 com.apple.preference.network.remoteservice [2539]: CGContextSetFontSmoothingStyle: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetDefaultUserSpaceToDeviceSpaceTransform: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, com.apple.preference.network.remoteservice [2539 295]: CGContextConcatCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextSaveGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextDrawImages: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextRestoreGState: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:26, [2539 295] com.apple.preference.network.remoteservice: CGContextGetCTM: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

    26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveTrackingHandler:-1856

    26/03/16 10:37:28, [2539 339] com.apple.preference.network.remoteservice: error in CoreDragRemoveReceiveHandler:-1856

    26/03/16 10:37:28, com.apple.xpc.launchd [1 393]: (com.apple.SystemUIServer.agent [2346]) Service was released due to the signal: Broken pipe: 13

    26/03/16 10:37:28, Spotlight 461 [459]: spot: logging agent

    26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

    26/03/16 10:37:28, [2539 487] com.apple.preference.network.remoteservice: service - area of the one error ERROR = NEConfigurationErrorDomain Code = 9 "configuration is unchanged" UserInfo = {NSLocalizedDescription = configuration is unchanged}

    26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: received an order to start com.apple.preference.network.re [2539]

    26/03/16 10:37:28, nesessionmanager 519 [2112]: NESMLegacySession [VPN_CONN_NAME$: 04c 10954-16 b 2 - 40BB - B3F1 - 9288F968029E]: changed to connecting status

    26/03/16 10:37:28, com.apple.SecurityServer [75 536]: rules of problem opening the file "/ etc/authorization ': no such file or directory

    26/03/16 10:37:28, com.apple.SecurityServer [75 536]: sandbox has denied authorizing the right "system.keychain.modify" customer "/ usr/libexec/nehelper" [184]

    26/03/16 10:37:28, 536 pppd [2616]: NetworkExtension is the controller

    26/03/16 10:37:28, 538 pppd [2616]: NetworkExtension is the controller

    26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: cannot copy content, returned SecKeychainItemCopyContent user interaction is not allowed.

    26/03/16 10:37:28, nehelper 540 [184]: 10954-16 b 2 - 40BB - B3F1 04c - 9288F968029E: SecKeychainItemFreeContent returned the user interaction is not allowed.

    26/03/16 10:37:28, 570 pppd [2616]: password not found in the system keychain

    26/03/16 10:37:28, 572 pppd [2616]: publish_entry SCDSet() failed: success!

    26/03/16 10:37:28, 573 pppd [2616]: publish_entry SCDSet() failed: success!

    26/03/16 10:37:28, 573 pppd [2616]: pppd 2.4.2 (Apple version 809.40.5) started by $VPN_SERVER_USER, uid 501

    26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceConnectedCallback

    26/03/16 10:37:28, SystemUIServer 620 [2615]: [BluetoothHIDDeviceController] EventServiceDisconnectedCallback

    26/03/16 10:37:28, authd 720 [124]: copy_rights: _server_authorize failed

    26/03/16 10:37:28, sandboxd 748 [120]: nehelper (184) ([184]) refuse the authorization-right-get system.keychain.modify

    III. New connection of Cisco VPN through IPSec Console app log:

    26/03/16 10:18:26, 917 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

    26/03/16 10:19:43, 975 WindowServer [172]: _CGXRemoveWindowFromWindowMovementGroup: 0x10d of window is not attached to the window 0x10f

    [26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: received an order to start SystemUIServer [2346]

    [26/03/16 10:19:56 nesessionmanager 265 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: changed to connecting status

    26/03/16 10:19:56, nesessionmanager 267 [2112]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, nesessionmanager 270 [2112]: phase 1 of the IPSec from.

    26/03/16 10:19:56, authd 284 [124]: copy_rights: _server_authorize failed

    26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

    26/03/16 10:19:56, 295 raccoon [2576]: agreed to the takeover of vpn connection.

    26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, 295 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 296 [2576]: connection.

    26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, racoon 296 [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, racoon 308 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, racoon 308 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:19:56, 352 raccoon [2576]: no message must be encrypted, 0x14a1, side 0 status

    26/03/16 10:19:56, nesessionmanager 352 [2112]: Controller IPSec: IKE FAILED. phase 2, assert 0

    26/03/16 10:19:56, nesessionmanager 353 [2112]: Controller IPSec: retry the aggressive mode IPSec with DH group 2

    26/03/16 10:19:56, nesessionmanager 373 [2112]: phase 1 of the IPSec from.

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec to connect to the server $VPN_SERVER_IP

    26/03/16 10:19:56, 374 raccoon [2576]: connection.

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, 374 raccoon [2576]: IPSec Phase 1 started (initiated by me).

    26/03/16 10:19:56, racoon 376 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 1 message).

    26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, racoon 376 [2576]: > > > > > status of phase change = Phase 1 began by us

    26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

    26/03/16 10:19:56, racoon 404 [2576]: port 62465 anticipated, but 0

    26/03/16 10:19:56, racoon 432 [2576]: IKEv1 Phase 1 AUTH: success. (Initiator, aggressive-Mode Message 2).

    26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:19:56, racoon 432 [2576]: > > > > > status of phase change = Phase 1 began with a peer

    26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: receive a success. (Initiator, Aggressive Mode 2 message).

    26/03/16 10:19:56, racoon 432 [2576]: initiating IKEv1 Phase 1: success. (Initiator, aggressive Mode).

    26/03/16 10:19:56, racoon 432 [2576]: IKE Packet: forward the success. (Initiator, Aggressive Mode 3 message).

    26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:19:56, 433 raccoon [2576]: IPSec Phase 1 established (initiated by me).

    26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

    26/03/16 10:19:56, racoon 453 [2576]: IPSec Extended requested authentication.

    26/03/16 10:19:56, 454 nesessionmanager [2112]: IPSec asking extended authentication.

    [26/03/16 10:19:56, nesessionmanager 464 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed by disconnecting

    26/03/16 10:19:56, nesessionmanager 464 [2112]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 465 [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, racoon 465 [2576]: IKE Packet: forward the success. (Information message).

    26/03/16 10:19:56, racoon 465 [2576]: IKEv1-Information Notice: pass success. (Delete the ISAKMP Security Association).

    26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

    26/03/16 10:19:56, racoon 465 [2576]: could not send message vpn_control: Broken pipe

    [26/03/16 10:19:56, nesessionmanager 465 [2112]: NESMLegacySession[$VPN-CONN-NAME:72874CC0-2A89-4B61-80F1-9BB4F3EA953B]: status changed to offline, last stop reason no

    26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:19:56, 466 raccoon [2576]: glob found no match for the path "/ var/run/racoon/*.conf".

    26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    26/03/16 10:19:56, 466 raccoon [2576]: IPSec disconnection from the server $VPN_SERVER_IP

    It seems that I solved the problem, but I'm not sure it helped.

    After restart of the operating system, the two connections: old and new Cisco via IPSec connection, began to work.

  • Unable to connect to the HP printable applications. 7520e Photosmart printer.

    I can't access or manage printable apps on my HP 7520e printer. I get the message error "unable to connect to the server, check the internet connection. My printer is connected to my WIFI with 100% signal. It has a static IP address. I can print with HP ePrint, while on the same network as well as remotely. I have remote access 100% to all the functions of the printer. I checked the updates using the update function printers and I have the latest firmware and updates on my printer. I also put in the manual entries in DNS Server 8.8.8.8 and 8.8.4.4 and I followed all threads to try to solve this problem. I also have errors on the connected HP WEB site preventing access of server certificate. This product using a Windows PC or Safari. It is a different matter, but I was trying to print the pintable apps that are on my printer from the HP WEB site connected.

    Fixed a problem!

    I decided to reset my printer to the factory settings and perform another installation. It worked! All my printable apps work! Be aware that if you decide to take this route, you will also need to go online to hpconnected.com and add your printer. Simply follow the instructions to Setup printer this impression during installation. You will also lose the printer name of e-mail that has been previously assigned and you will need to create a different, or use a new one that is automatically created. Also as easy advantage to use, does not need to set up my printer with a static IP address or manually set the DNS addresses. After I chose the factory and WIFI selected as my connection, my printer connected to my router immediately. Note: I do not use security on my router. Also, I installed FireFox on my Mac computer and can now browse hpconnected.com without problems.

    1. Press the key Icon on your control panel and go to "restore default settings", and then select.
    2. Power cycle your printer.
    3. Run the Setup program.
    4. Optional if you have a Mac instead of a windows PC: install FireFox to navigate hpconnected.com that Safari has issues with this site.

  • Outlook Express: Unable to connect to the mail server! (error 0x800CCC90)

    original title: Outlook Express: unable to connect to the mail server!

    Im trying to get my outlook express to receive and send messages from my live.com account but it comes back with: the server responded with an error. Account: "Live.com', Protocol: POP3, server response:'-ERR AVG POP3 Proxy Server: cannot connect to the mail server!', Port: 110, secure (SSL): no, Server error: 0x800CCC90, error number: 0x800CCC90."

    Someone knows how to fix this? I tried to remove and add the account again using IMAP instead of POP3, but still get an error message, the e-mail address and the password are all correct and I think that ive got the right to Server (live.com?) Im not exactly computer so any help would be greatly appreciated.

    You will find the right settings for an account on this page live.com: send and receive Hotmail from an e-mail application. To change your settings, select Tools > accounts > {account} > properties and make right onto the tabs of servers and Advanced entries.

    [I moved your question on the forum just for Outlook Express issues.] You should not notice a difference].

    Noel

  • Unable to connect to the internet, in vista h.p.. /.

    Unable to connect to the net in vista h.p./tried reset cable motem [unplug and reconnect] / I tried to disable and re activate device Man. / Properties show peripheral works properly or not a cable/same question do you have a complete op sys. reinstall and tried previous tries again to EVERYTHING/IDEAS? The computer is an acer m1100 amd 64 x 2 4400 2.3 with a Maxwell Yukon pci - e Ethernet controller [using a wired connection]

    Hello

    That you get error messages when you tried to connect to the Internet?

    You may encounter network or problems of Internet in Windows for several reasons. Some common problems that can cause these problems are:

    • A wireless network adapter switch that is not enabled

    • WEP, WPA, or WPA2 key or password security issues

    • Cables that are not connected correctly

    • Corrupt or incompatible drivers

    • Missing updates

    • Network connection settings

    • Hardware or software problems

    You can run the troubleshooter and update network cards.

    Wireless and wired network problems
     
    Also see these articles for more information and to perform the steps.
     
    Network connection problems

    http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-network-connection-problems

    The problems of Internet connection

    http://Windows.Microsoft.com/en-in/Windows-Vista/troubleshoot-Internet-connection-problems

    Hope this information helps. Response with status so that we can help you.

  • Windows Media Center - not the initial download put in place data for guide "unable to connect to the remote server.

    Hello

    Looking for help on this one...

    I have a new install of windows 7 pro running, and I was not able to get the guide to download Windows Media Center.   I am up-to-date with all the updates and SP1 version running.   My video card drivers are also updated.

    I use HDHOMERUN PRIME equipment with cablecard and who receives a TV signal very well and I am able to view it in WMC.    I use Verizon FIOS and my zip code is 07452.    Before this computer, I ran the cablecard even with a ceton infinitv and had no problem Guide at all.

    It's just that I can't download the guide data.  Its just totally blank.   I receive the channels and view them, but there is NO data.      Whenever I run the TV setup the same question comes up.  Cannot download the initial configuration data due to the error of previous download.   As far as I know, there is NO error message when Windows installed... actually... I reinstalled windows completely and this has not solved the problem.    I tried to manually download the guide which did not help.   It... nothing happened when I turned 'on' and 'off' WMC in Control Panel to reinstall.  I even tried explore the ehome folder and remove the file db... but nothing is helping.

    I can't find a file mcupdate.exe light on my system - don't know if this is relevant.   When I looked in the event viewer here are some of the error messages that I see.

    Impossible to extract the EpgLineups (error: unable to connect to the remote server)
    Impossible to extract the MCEClientUX (error: unable to connect to the remote server)

    I'm starting to think it's a matter of windows.   Anyone have any ideas?

    Mark

    E-mail address is removed from the privacy *.

    On Tuesday, September 23, 2014 00:32:35 + 0000, Mark_Sap_70 wrote:
     
    > I'm starting to think it's a matter of windows.   Anyone have any ideas?
     
    See this thread
     
     
     
    __________________________________________________________________________________________________
    Barb
    MVP Windows Entertainment and connected home
     
    Please mark as answer if that answers your question
     
     
     

  • Unable to connect to the hotspot, iphone

    On the road, I often use an internet connection on my Samsung laptop using my iphone hotspot 5 by ATT.  I made no changes to the computer or the phone, but all of a sudden, the message is "unable to connect to the iphone.  ATT said there must be a problem with the computer, because it has a wi - fi strong signal sent to the PC when I turn on the hotspot connection.  When I'm at home, our wireless network connection works fine on my computer... Any suggestions... I need to connect while mobile!

    Hello

    Thank you for reaching out to us to Microsoft Community.

    This problem seems to be related to an incorrect setting, ask to try the steps of troubleshooting provided in the link below.

    iOS: Troubleshooting Personal Hotspot

    Hope the helps of information provided. Keep us informed on the status of the issue.

  • Unable to connect to the virtual disk Service, Virtual Disk Manager Interface not registered

    I installed Windows 7 Ultimate on this laptop as a new installation about six months ago.  Since then, I don't think I ever ran diskmgmt.  Today, I joined a new external hard drive usb, it reported the drivers installed fine, but then the installation bombed at the beginning.  I went to verity, what had happened and has run diskmgmt.msc (as an administrator), but she came back with the message "Unable to connect to the virtual disk Service" and also a small OK msgbox appeared with the title "Virtual Disk Manager" and the "Interface not registered" message

    I disconnected the USB hard drive and tried again diskmgmt, but no change.

    I restarted in safe mode, tried diskmgmt, but no change.

    I ran sfc/scannow, but it has reported that it found no errors.

    I checked that the virtual disk service has been configured as a textbook in services.msc, and event viewer showed that when I ran diskmgmt he started VDS and then stopped VDS.

    I tried again, but still not like before.

    Is there some dll I can't regsrv32?

    Thank you

    Marc

    Hello

    I suggest you to return the items for the following responses from Microsoft, he says same issues with trying the troubleshooting steps and check if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/cant-start-disk-management-unable-to-connect-to/31898500-9d84-4CB5-9ba3-c1f42e3b1ace

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problems-with-Vista-after-unplugging-by-external/093f1660-160F-478f-b81a-493e963ffd9a

    http://TechNet.Microsoft.com/en-us/library/cc771775.aspx

    Note: it also applies to Windows 7.

    Hope the information is useful.

  • Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

    I get the following error when I connect to my via Vsphere Vcenter and try to connect to one of my server with the console:

    Unable to connect to the MKS: address for server esx02.mgmt.domainname.dk host lookup failed: unknown error 11002 (0x2afa)

    I'm new to VMware, I can very well do a MSTSC server and work proberly.

    the VMwareTools are out of date, when I log on the server and try to update I get the following message:

    vmware tools error.jpg

    any ideas here?

    I discovered that it is related to DNS

    WSATRY_AGAIN

    11002 (0x2afa)

    It is usually a temporary error during hostname resolution and means that the local server does not valuationauront of response from an authoritative server.

    the issue was that the VMware system was on a different subnet, and the firewall (TMG) blocked. bring the RDP to the Vcenter server and vsphere then open works like a charm

  • Unable to connect to the MKS: the operation is not allowed in the current state

    Hi all

    After the upgrade of vmware tools, we have a problem while safeguarding a guest vm with avamar. VM freezes and he said; "Unable to connect to the MKS: the operation is not allowed in the current state.  It can be stopped only by killing the task in the service on the host esx console.

    VMware vCenter Server 5.1 - 5.1.U1b - 1235232

    2013 12-19 T 00: 49:15.146Z | vCPU-1 | W110: MONITOR PANIC: vcpu - 0:NOT_IMPLEMENTED devices/vide/iovmk/videVMK-vmkio.c:1492

    2013 12-19 T 00: 49:15.156Z | vCPU-1 | I120: Core dump with construction build-1065491

    2013 12-19 T 00: 49:15.156Z | vCPU-0 | I120: Exit vcpu-0

    2013 12-19 T 00: 49:15.156Z | vCPU-1 | W110: Writing monitor corefile "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmmcores.gz".

    2013 12-19 T 00: 49:15.202Z | vCPU-1 | I120: Save the anonymous memory

    2013 12-19 T 00: 49:15.209Z | vCPU-1 | W110: Dumping core for vcpu-0

    2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: CoreDump: dumping core with superuser privileges

    2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: VMK battery for vcpu 0 is 0 x 412248155000

    2013 12-19 T 00: 49:15.209Z | vCPU-1 | I120: Start monitor coredump

    2013 12-19 T 00: 49:16.454Z | vCPU-1 | I120: End monitor coredump

    2013 12-19 T 00: 49:16.455Z | vCPU-1 | W110: Dumping core for vcpu-1

    2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: CoreDump: dumping core with superuser privileges

    2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: VMK battery for vcpu 1 is at 0x4122481d5000

    2013 12-19 T 00: 49:16.455Z | vCPU-1 | I120: Start monitor coredump

    2013 12-19 T 00: 49:17.420Z | vCPU-1 | I120: End monitor coredump

    2013 12-19 T 00: 49:17.421Z | vCPU-1 | W110: Dumping extended monitor data

    2013 12-19 T 00: 49:31.966Z | vCPU-1 | W110: A core file is available in "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmx-zdump.000".

    2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: Msg_Post: error

    2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: fatal error [msg.log.error.unrecoverable] VMware ESX: (vcpu-1)

    2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120 + vcpu - 0:NOT_IMPLEMENTED devices/vide/iovmk/videVMK-vmkio.c:1492

    2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.haveLog], a log file is available in "/ vmfs/volumes/4ff12f8d-9d4d7a89-9341-e4135bb796b4/TEADEV/vmware.log".

    2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.requestSupport.withoutLog] you can ask support.

    2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.requestSupport.vmSupport.vmx86]

    2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120 + to collect data to be submitted to the technical support of VMware, run 'vm-support.

    2013 12-19 T 00: 49:31.966Z | vCPU-1 | I120: [msg.panic.response] we will respond on the basis of your entitlement to support.

    We realized that the problem is our url filtering service checkpoint firewall. When we have disabled all begins to work very well.

  • RC-40201: unable to connect to the TEST database running adcfgclone.pl appsTier

    Hi Experts,

    While performing a cloning my instance of R12, I got RC-40201 error when I ran "adcfgclone.pl appsTier.

    [appltst@oracleupk bin] $ perl adcfgclone.pl appsTier

    Copyright (c) 2002 Oracle Corporation

    Redwood Shores, California, USA

    Applications Oracle rapid Clone

    Version 12.0.0

    adcfgclone Version 120.31.12010000.1

    Enter the password for APPS:

    Running:

    / data/appl_top/apps/apps_st/comn/clone/bin /... / JRE/bin/Java-Xmx600M - cp /data/appl_top/apps/apps_st/comn/clone/jlib/java:/data/appl_top/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/ojdbc14.jar oracle.apps.ad.context.CloneContext EI/data/appl_top/apps/apps_st/comn/clone/bin /... /Context/Apps/CTXORIG.xml-valider - pairsfile /tmp/adpairsfile_24425.lst-stade/data/appl_top/apps/apps_st/comn/clone 2 > /tmp/adcfgclone_24425.err; ECHO $? > /tmp/adcfgclone_24425.res

    Logfile located at /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log

    Provide the values required for the creation of the new file APPL_TOP context.

    Target System Hostname (virtual or normal) [oracleupk]:

    SID data system target: TEST

    Target database system [oracleupk] server node:

    Target system Base Directory: / data / appl_top

    Target system tools ORACLE_HOME directory [/ data/appl_top/apps/tech_st/10.1.2]:

    Target Web ORACLE_HOME directory system [/ data/appl_top/apps/tech_st/10.1.3]:

    Target system APPL_TOP directory [/ data/appl_top/apps/apps_st/appl]:

    Target system COMMON_TOP directory [/ data/appl_top/apps/apps_st/comn]:

    Target system Instance home directory [/ data/appl_top/inst]:

    Target system service root [activated]:

    Target Web Entry Point [active] System Services:

    Target [active] System Web Application Services:

    Target [active] Batch Processing Services system:

    Other Services target system [off]:

    You want to preserve the display [oracleupk:0.0] (y/n)? : n

    Target display system [oracleupk:0.0]: oracleupk:1.0

    System Target Pool [0-99] port: 80

    Audit of the pool of port 80

    fact: Port 80 pool is free

    Report file is located at /data/appl_top/inst/apps/TEST_oracleupk/admin/out/portpool.lst

    Information available at /data/appl_top/inst/apps/TEST_oracleupk/admin/out/portpool.lst complete port

    RC-40201: unable to connect to the TEST database.

    Create the new file APPL_TOP context of:

    /Data/APPL_TOP/apps/apps_st/appl/ad/12.0.0/admin/template/adxmlctx.tmp

    The new context APPL_TOP file was created:

    / Data/APPL_TOP/inst/Apps/TEST_oracleupk/Appl/admin/TEST_oracleupk. XML

    Logfile located at /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log

    Check the context Clone logfile /data/appl_top/apps/apps_st/comn/clone/bin/CloneContext_0912145803.log for more details.

    Clone of fast running with the command:

    Perl java /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl = / data/appl_top/apps/apps_st/comn/clone/bin /... /JRE mode = apply dialing = / data/appl_top/apps/apps_st/comn/clone point = appsTier = CUSTOM appctxtg=/data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml contextValidated = true showProgress method

    Running:

    Perl java /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl = / data/appl_top/apps/apps_st/comn/clone/bin /... /JRE mode = apply dialing = / data/appl_top/apps/apps_st/comn/clone point = appsTier = CUSTOM appctxtg=/data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml contextValidated = true showProgress method

    Apps for password:

    Start application layer apply - Fri Oct 12 15:01:20 2013

    / données/appl_top/apps/apps_st/comn/clone/bin /... /jre/bin/java -Xmx600M -DCONTEXT_VALIDATED=true -Doracle.installer.oui_loc=/oui -classpath /data/appl_top/apps/apps_st/comn/clone/jlib/xmlparserv2.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/ojdbc14.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/java:/data/appl_top/apps/apps_st/comn/clone/jlib/oui/OraInstaller.jar:/data/appl_top/apps/apps_st/comn/clone/jlib/oui/ewt3.jar:/data/appl_top/apps/apps_st/comn/clone/ jlib/Oui/share.jar:/data/appl_top/apps/apps_st/ Comn/clone/jlib/Oui/srvm.jar:/Data/APPL_TOP/Apps/apps_st/COMN/clone/jlib/ojmisc.jar oracle.apps.ad.clone.ApplyAppsTier EI /data/appl_top/inst/apps/TEST_oracleupk/appl/admin/TEST_oracleupk.xml-/data/appl_top/apps/apps_st/comn/clone - scene showProgress

    Password APPS: log file located at /data/appl_top/inst/apps/TEST_oracleupk/admin/log/ApplyAppsTier_09121501.log

    -79% completed

    ERROR when executing apply...

    Fri Oct 12 15:07:47 2013

    ERROR: Cannot run /data/appl_top/apps/apps_st/comn/clone/bin/adclone.pl

    Contents of the log file: -.

    [AutoConfig error report]

    The following report lists the errors autoconfig met in each

    execution phase.  Errors are grouped by directory and by phase.

    The format of the report is:

    < file name > < phase > < eventually return code >

    [INSTALLATION STAGE]

    AutoConfig could not successfully run the following scripts:

    Directory: / data/appl_top/inst/apps/TEST_oracleupk/admin/install

    adgendbc.sh INSTE8_SETUP 1

    afcpnode.sh INSTE8_SETUP 1

    afgcsreg.sh INSTE8_SETUP 1

    txkWfClone.sh INSTALL_SETUP 1

    [PROFILE PHASE]

    AutoConfig could not successfully run the following scripts:

    Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /data/appl_top/apps/apps_st/appl/au/12.0.0/perl-je /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi /data/appl_top/inst/apps/TEST_oracleupk/admin/scripts/adexecsql.pl sqlfile = / data/appl_top/inst/apps/TEST_ oracleupk/admin /. install

    afwebprf. SQL INSTE8_PRF 1

    amscmprf. SQL INSTE8_PRF 1

    amswebprf. SQL INSTE8_PRF 1

    bisadmprf. SQL INSTE8_PRF 1

    bisdblrp. SQL INSTE8_PRF 1

    clnadmprf. SQL INSTE8_PRF 1

    cncmprf. SQL INSTE8_PRF 1

    cseadmprf. SQL INSTE8_PRF 1

    csfadmprf. SQL INSTE8_PRF 1

    csiadmprf. SQL INSTE8_PRF 1

    eamadmprf. SQL INSTE8_PRF 1

    fteadmprf. SQL INSTE8_PRF 1

    ibywebprf. SQL INSTE8_PRF 1

    icxwebprf. SQL INSTE8_PRF 1

    oksfrmprf. SQL INSTE8_PRF 1

    wshadmprf. SQL INSTE8_PRF 1

    Directory: / data/appl_top/inst/apps/TEST_oracleupk/admin/install

    adadmprf.sh INSTE8_PRF 1

    admk80ln.sh INSTALL_PRF 1

    afadmprf.sh INSTE8_PRF 1

    afcpctx.sh INSTE8_PRF 1

    afcpgsm.shINSTE8_PRF1
    igccmprf.shINSTE8_PRF1
    jtfictx.shINSTE8_PRF1
    okladmprf.shINSTE8_PRF1
    txkJavaMailerCfg.shINSTE8_PRF1
    txkWebServicescfg.shINSTE8_PRF1

    [APPLY PHASE]

    AutoConfig could not successfully run the following scripts:

    Directory: /data/appl_top/apps/tech_st/10.1.3/perl/bin/perl-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/5.8.3-je /data/appl_top/apps/tech_st/10.1.3/perl/lib/site_perl/5.8.3-je /data/appl_top/apps/apps_st/appl/au/12.0.0/perl-je /data/appl_top/apps/tech_st/10.1.3/Apache/Apache/mod_perl/lib/site_perl/5.8.3/i686-linux-thread-multi/data/appl_top/inst/apps/TEST_oracleupk/admin/install
    adadmat.plINSTE8_APPLY1

    Fate of 31 stateful auto-configuration

    RC-50014: Fatal: failed to run the auto configuration service

    Asked by oracle.apps.ad.clone.ApplyApplTop

    ERROR: AutoConfig completed with errors. Check the logfile at /data/appl_top/inst/apps/TEST_oracleupk/admin/log/ApplyAppsTier_09121501.log for more details.

    ApplyApplTop completed successfully.

    # Check the race situation AutoConfig of ApplyApplTop

    WARNING: The autoconfiguration service has completed with errors.

    Please help me solve this problem, your prompt response will be highly appreciated.

    -Thank you

    Ankur

    Audit of the pool of port 70

    fact: Port pool 70 is free

    You used port 70 for the node of the database layer, so you will need to use the same port pool (70 instead of 80) when running "perl adcfgclone.pl appsTier.

    Thank you

    Hussein

  • 'Unable to connect to the server' msg on Palm Pre to the IMAP e-mail server

    I am trying to connect to a server of Courier IMAP on my Palm Pre. It happens to be a Lotus Domino 7 server, but I don't think that is relevant, unless someone can suggest a better Protocol IMAP (don't want to use POP, because I want access to records). I was able to use it very well on my Palm 750 (Win Mobile) and now for the test, on Outlook Express as a Windows client, so I know that the IMAP server does not work correctly.

    On the Meadow, when I press the "Sign In" button at the bottom of the page of manual configuration of account, I always get the message:

    Error

    Unable to connect to the server

    I am able to sync the Pre with EAS system based on Zimbra to my business and my personal Google gmail account without any problem.

    On the Meadow, in the manual configuration of the account, I entered

    E-mail type: IMAP

    nom_ordinateur.nom_domaine.com

    user name [no @domain.com]

    password

    Port: 143

    Encryption: no

    [And yet once again, I know that the values that I have entered are correct, because I just enter values in Outlook Express and it worked fine.]

    He actually let me same hit "Sign in" until I set up outgoing mail server also (which seems weird and as a minor bug - it should let me retrieve messages, even if I don't have an available SMTP server to send responses). So, I also implemented the mail out with authentication server. I don't know I have a valid for sending SMTP system, but let's assume that is not related to the error, as I just want to do my incoming mail and be able to deposit in the IMAP folders respective, at least for now. I'll worry send later.

    Initially, I left the empty root folder option. I also tried to put a "/" (single, slash, ignore the quotation marks) in there. No effect.

    (Question on semi - the Pre does support multiple connections EE without getting confused? In general (on Win Mobile anyway), you can only have 1 per device. If it was an option on the Meadow, perhaps I could empty Domino in favour of another Exchange Server, but this would be a term much more time here, I hope with my IMAP question).

    Thanks for any help,

    Colin

    It seems that you need a smtp server configuration that is valid for the step of the link set.  In the test here, if the SMTP connection is refused/incorrect login it will not create the account (verified by looking at the packet stream, newspapers of IMAP connection fine, SMTP connection refused, account refused on the Meadow).

    So now, it seems that you need a valid SMTP server in order to create an account.

  • Unable to connect to the URL of planning after new installation &amp; configuration 11.1.2

    I installed 11.1.2 on Windows 64 bit environment and configured.

    This is my environment:
    Box 1. FS, Essbase, Weblogic, Oracle HTTP. Successfully set up and works great no problem (I don't not configured web server in FS yet)
    Box 2. Planning. Installation and configuration was successful.

    Question: but unable to connect to the URL http://servername:8300/hyperionplanning/logon.jsp and http://servername:19000/hyperionplanning/logon.jsp (I'm not expecting 19000 will connect)

    Trobleshooting:
    When executing netstat, 8300 does not run on this box.
    Also configured to 'Manage the clusters of planning' with no luck.
    The WebLogic (11g) server indicated State planning is unknown.
    Diagnosis indicates: 1. There is no 2 System-jazn-"Data.xml" file. Web application for planning has no reason of error: java.net.ConnectException: Connection refused: connect
    I stopped and restarted service app planning several passages of time without any problem but unable to connect to the URL and no port is running.
    Journal of planning does not reveal the error messages.
    EMP system log shows ServletContainerAdapter manager not initialized successfully
    There is no error in start-HyS9Planning - out .log.
    Start-HyS9Planning - error.log shows the requested service has already been started.

    There is an error in the validation log:

    [2010-10 - 06T 10: 18:23.171 - 04:00] [EPMVLD] [ERROR] [EPMVLD-02017] [oracle. EPMVLD] [tid: 25] [ecid: 0000Ii1u3V8EcLPMyeU ^ MG1Cf8KW00000E, 0] [SRC_CLASS: com.hyperion.cis.validation.checkers.impl.AppServerChecker] verification code error response: []
    java.lang.Exception: java.net.ConnectException: connection refused: connect
    at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:153)
    at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:66)
    at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplication(AppServerChecker.java:159)
    at com.hyperion.cis.validation.checkers.impl.AppServerChecker.checkWebApplications(AppServerChecker.java:119)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.mozilla.javascript.MemberBox.invoke(MemberBox.java:160)
    at org.mozilla.javascript.NativeJavaMethod.call(NativeJavaMethod.java:243)
    at org.mozilla.javascript.optimizer.OptRuntime.callProp0(OptRuntime.java:119)
    to org.mozilla.javascript.gen.c14._c0(./scripts/webappcheck.js:2)
    to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
    at org.mozilla.javascript.ContextFactory.doTopCall(ContextFactory.java:401)
    at org.mozilla.javascript.ScriptRuntime.doTopCall(ScriptRuntime.java:3003)
    to org.mozilla.javascript.gen.c14.call(./scripts/webappcheck.js)
    to org.mozilla.javascript.gen.c14.exec(./scripts/webappcheck.js)
    at org.mozilla.javascript.Context.evaluateReader(Context.java:1119)
    at com.hyperion.cis.validation.RunningEnviroment.processSource(RunningEnviroment.java:222)
    at com.hyperion.cis.validation.RunningEnviroment.runScript(RunningEnviroment.java:279)
    to com.hyperion.cis.validation.RunningEnviroment.access$ 000 (RunningEnviroment.java:40)
    to com.hyperion.cis.validation.RunningEnviroment$ 1.run(RunningEnviroment.java:132)
    Caused by: java.net.ConnectException: connection refused: connect
    at java.net.PlainSocketImpl.socketConnect (Native Method)
    at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
    at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
    at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
    at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
    at java.net.Socket.connect(Socket.java:519)
    at sun.net.NetworkClient.doConnect(NetworkClient.java:158)
    at sun.net.www.http.HttpClient.openServer (HttpClient.java:394)
    at sun.net.www.http.HttpClient.openServer (HttpClient.java:529)
    to sun.net.www.http.HttpClient. < init > (HttpClient.java:233)
    at sun.net.www.http.HttpClient.New (HttpClient.java:306)
    at sun.net.www.http.HttpClient.New (HttpClient.java:323)
    at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient (HttpURLConnection.java:852)
    at sun.net.www.protocol.http.HttpURLConnection.plainConnect (HttpURLConnection.java:793)
    at sun.net.www.protocol.http.HttpURLConnection.connect (HttpURLConnection.java:718)
    at com.hyperion.cis.utils.HttpUtils.checkResponseCodeGood(HttpUtils.java:111)
    ... 21 more

    ]]


    What am I not doing?

    Thanks for your help in advance!

    Published by: VenuRamini on October 6, 2010 07:25

    Published by: VenuRamini on October 6, 2010 07:35

    Make sure that the Weblogic password is correct in the boot.properties and restart the services.

    Boot.properties files would be present in D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\\security\boot.properties

    For example,.

    For APS:
    D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\AnalyticProviderServices1\security\boot. Properties

    For Regional service:
    D:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices1\security\boot. Properties

    HTH-
    Jasmine.

Maybe you are looking for

  • Web site image sizes are not be cached when I click on their properties

    Since the update to Firefox 18 on my wife's cell phone when she clicks on "View the image info" the size is shown as "unknown (not cached). When I try on my desk the KB of photos show as normal. The only difference between the two is the office is 32

  • lack of music to iCloud iTunes 12.3.3.17

    Hi guys,. I just upgraded my itunes to the latest version (12.3.3.17) and since I did, most of my music to iCloud library is missing, particularly content that I got from Apple's music. I see songs and albums I bought long ago on the iTunes store, bu

  • Satellite Pro L300 - 'problem adapter - driver not installed.

    I replaced Vista with XP. Almost everything well except that I get this problem adapter - driver not installed message"whenever I connect. I have been on the download from Toshiba site and almost everything has been installed to the L300. Not very te

  • Designjet 1050c Cutter do not operate.

    I searched this forum for old cutter 1050/1055 related messages, but nothing has fixed the problem. Here's the background info... I fixed the plotter last summer and it has worked great until about 2 months ago.  He plots fine, but will not cut the p

  • I don't get all the sounds from my speakers

    Original title: sound recording play I don't get all the sounds from my speakers... the icon has an x through it... said that they don't are not hooked... shouldn't have internal sound