HP ENVY 5530: Print cable not using not wireless not printing

Similar Questions

• HP Envy 5530: Printer not closing

  Sometimes the printer will not stop. I press the power button / stop and it will work for cut you during a certain time and then freezes. Then I have to unplug it to stop it. This happens more often than otherwise.

  Hello @Rocky4052,

  Welcome to the Forums of HP Support!

  I would like to help you today to solve the problem of response of power button that you experience when you try to stop your HP ENVY 5530 e-all-in-one printer. This problem may be due to a problem power or a problem of programming within your printer Firmware. Can I please you follow the steps below to isolate this problem and fix it.

  Step 1: Check of power:

  Please plug your printer directly into a wall outlet for power. Power strips and surge protectors can cause your printer not responding correctly. Once your printer is plugged directly into an outlet please test. If the problem persists, proceed to the next step.

  Step 2: Perform a power reset:

  1. Turn on your printer
  2. With the printer on , please unplug the power cord to the back of your printer
  3. Leave the power cable disconnected for 60 seconds
  4. After that 60 seconds plug back power cord in
  5. Your printer should start up on its own

  Once the printer lights please test your machine to make sure it works. Should everything work properly please press the power button on your printer to powercycle the machine and check if your computer turns off as per normal. If "closing" issue persists, proceed to the next step.

  Step 3: update Firmware:

  The Firmware is the internal programming in your printer. Is there an internal corruption in your printers Firmware, it can cause performance within your product. Therefore, I would like to confirm that your HP Envy runs the latest version of the Firmware. Please click here to download the last Firmware update. Once the download is complete, please follow the guests to the screen to 'send' the Firmware for your printer. Once the Firmware in your HP Envy also attested to date please test your machine. Once you confirm that your machine is running according to the normal, please use the power button on your printer to powercycle the machine. If the "closing" issue persists, please proceed.

  -Source

  Please reply to this message with the result of your troubleshooting. If the problem continues then a Semi full Reset programming may need to be performed on your machine. I can't wait to hear strings attached good luck!

• HP ENVY 5530: HP ENVY 5530 print does not correctly on glossy paper

  I have a HP ENVY 5530 bought 6 months ago. It works fine up to last week.

  When I try to print photos on paper glossy A4-180gsm printing process seems to start until the paper has been fed properly - resulting in one third of the image is not being printed.

  The amount of the printed image varies so I guess this isn't a calibration problem, but more likely a slip on paper feed.

  I printed out photos full page on the same paper successfully during the last 6 months if the paper is OK.

  The printer will print on uncoated paper 90gsm without problem.

  How to remedy this anomaly?

  In the paper here troubleshooting steps can help solve power problems on your HP Envy 5530 glossy paper.  I would say that the cleaning rollers as described in the solution of two.

• HP ENVY 5530: PRINTER SUDDENLY WILL NOT PRINT PHOTOS,.

  • MY PRINTER HAS PRINTED PHOTOS ALL THE TIME, BUT SUDDENLY HE STOPPED, I CHECKED WITH THE DOCTOR HP PHOTO AND SCAN AND PRINT TEST PAGE COMES OUT PERFECTLY, ACTUALLY I JUST PRINTED A PHOTO OF 8/10 AND PRESS A POCKET FORMAT THOSE AND HE SAYS IT OF PRINTING TO THE SCREEN BUT NOTHING DOESN'T I TRIED ANOTHER PHOTO OF 8/10 AND NOTHING DON'T GO OUT, I THEN PRINTED A RECIPE AND IT CAME OUT PERFECTLY AND THE IMAGE OF THE RECIPE ON THE COVER PAGE, WHAT CAN I DO?

  Hi @TRICIAPAT,

  Thank you for joining the HP Forums!

  I noticed your post on how your 5530 Envy of HP will not print photos. I'm happy to help you!

  If please try the instructions in this guide, Print Photos (Windows)and let me know what happens!

  If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  I hope this guide to solve your problem!

• HP ENVY 5530: HP ENVY 5530 print NOT in win 8.1

  Is it a good solution for the bottom yet? This happened for months and still no solution. I bought this printer 4 days here were many of online recommendations, but these have been overshadowed by the below:

  New printer wireless HP ENVY 5530 bought 2 days ago. Does NOT print a single document in Windows 8 or 8.1. It's scanning perfectly, I can also print from my HP eprint App Android perfectly. The printer is showing as connected and working properly (as evidenced by the ability to print from the device).

  The printer accused that I try to print a Word, the message printer box doc, when clicked, shows me the document sent to the printer, and yet it sits there for about 3-4 seconds then... DISAPPEARS and no document comes out of the printer.

  I tried all bugs below:

  LEVEL 1:
  Uninstall the printer software

  • Rename the HPBXPSRENDER. DLL to HPBXPSRENDER. OLD, (located in C:\Windows\System32\spool\drivers\x64\3 for 64-bit and C:\Windows\System32\spool\drivers\w32x86\3 for 32-bit)
  • Reinstall the printer software

  Result: FAIL - there is NO HPBXPSRENDER. DLL

  LEVEL 2:

  • Unplug everything, leave for 60 seconds, plug back in

  Result: FAILURE

  LEVEL 3:

  • Disable firewall

  Result: FAILURE

  Hey @Aaaaaahhhhhhhhh,

  Thanks for getting back to me on this subject. At this point I'll have to charge you another driver on your Windows computer to fix this. Can I please you follow the steps below.

  1. Open the screen, Start by selecting the Windows icon at the bottom left of your computer screen or by selecting the Windows key bottom left of your keyboard to the right of the Ctrl key
  2. On the start screen, type devices and printers. Click on devices and printers to the start
  3. Under devices and Printers window right-click on your HP Envy
  4. Left click on printer properties
  5. Click the Advanced tab
  6. Click new driver
  7. When the new window driver opens just hit "Next" until you see a list of manufacturers and Printers
  8. Select the manufacturer HP
  9. Select the Deskjet 6980 printer. If the Deskjet 6980 does not appear in the list of available printers, select "Windows Update" on the bottom. Once the update is completed, you will be able to select the Deskjet 6980
  10. After you select the Deskjet 6980 hit "Next" to complete the wizard again pilot
  11. Under the printer properties window, select apply but do not hit OK
  12. Select the general tab
  13. Rename your printer to the HP Envy 5530
  14. Click OK
  15. Right click on your HP Envy , one more time, and left-click on Printing Preferences
  16. Click the paper/quality tab
  17. Click on the drop down menu 'Normal' for the print quality on the bottom right and change that to "Normal Fast"
  18. Click apply and then click OK to save the changes
  19. Close Devices and printers

  Now that the other pilot has been successfully added to please test print to see if the problem is now resolved.

  Please let me know if this procedure works for you. Good luck!

• Example: HP Envy 5530: scanner does not connect to the PC

  I can't scan from HP Envy 5530 all series printer/scanner to 8.1 Windows/PC. It works fine from my PC, but not touching the scan on the new printer/scanner function. He always used to work by tapping the button on my previous HP printer; makes it faster and easier that way.

  Any suggestions?

  Thank you very much!

  Hi viking49,

  Thank you for answering my questions, I appreciate it!

  Please, try the procedure described in this guide to scanning, connection error shows then scanand let me know what happens!

  I hope this guide is useful!

  "Please click the Thumbs up icon below to thank me for having responded."

• HP Envy 5530 PSC: HP ENVY 5530 PSC will not scan and save on my desktop directly from the PSC. Help!

  Help, please! My printer/scanner/copier device will scan is no longer documents if you ask the PSC analysis directly. It will scan and I would like to save the scan on my computer if I open the icon Wizard HP printer on my desktop computer and it asks from there. Nothing has changed on this computer or PSC recently and the PSC makes still copies very well.

  When I request the analysis of the PSC, here is the error message that appears: "connection error. The computer does not respond. Check if the USB cable is attached or wireless is working properly, and then try again. »

  Some info:

  The PSC shows that it is connected to the computer and I checked the connections and everything is physically connected. I also update the PSC. The PSC is certainly connected to the internet (and without wire - the light blue, no flashing lights). I have Webroot Anywhere Secure protection for my desktop computer.

  I checked the forums here and I do not see a response. Some of the help documents are dead end links so that does not help.

  I'm not sure if this is a permanent solution, but finally, I finally solved this problem.  I decided to first unplug and then plug in my router. Then I unregistered and registered with Windows 10, your previous recommendation. Then I started from scratch - unplugged everything related to the CFP and also deleted the previous PSC software installed on the computer. Then I plugged in the printer and re-downloaded software. Tested to request a scan of the PSC and it worked - double checked by stop and to remit all running and I tried to request a scan of the PSC again and it worked again. So, it seemed to be a combination of renewal with Windows 10 and setting up of the PSC from scratch, to solve this, at least for me. Thanks for your patience! I don't think something regarding my download Windows 10 had something to do with mess up the signal from the PSC to the computer and I had to put fresh once again.

• Re: Fast draft between Chromebook HP and HP Envy 5530 printer

  Hello

  I was delighted when I bought my new HP envy 5530. Prints well and I like the feature where I can emial directly on the printer.

  The big disappointment is the following... I have an Acer Chromebook. Use Chrome Web Store rather than the game store, so I can't download HP eprint. I can't install the software b/c I don't have a cd player.

  Is it possible to print on my new HP envy 5530 to and Acer Chromebook?

  Hello chromebookuser,

  Welcome to the HP Support forums.   I understand that you have a Chromebook and your printer Envy 5530 and want to get the program installation and operation.

  The first step is to connect the printer to your wireless network.  This can be easily completed from the front panel of the printer.  If you do not know how do steps are in your User Guide page 55 in the section titled "to connect the product with the wireless configuration wizard.

  Now that the printer is connected to your wireless network, we need to enable the web printer services.  This too can be completed the façade.  Please refer to the code of request for printer if you need assistance. Please set up your account connected HP or HP ePrintCenter.  Using the printer application code, you can now Set Up a Custom E-mail address for ePrint.

  Now that we have customized the ePrint printer e-mail address we can implement Google Cloud Print.  I have included the Google Cloud Print help with your HP printer to guide you through the process.  You should now print with Google Cloud Print.  For any additional consultation, I have included print a Page from Google of document.

• All-in-one HP Envy 5530: printing on all-in-one HP Envy 5530 error

  I got this special printer for less than a year and this is the first problem I've had with her.

  Recently, whenever I try to print something, I click Open Active printers and after a while the work in the print queue displays "Error-printing" and will not start the print job.

  He also said that it is properly connected to my network so I reinstalled the software and drivers and restarted my system trying to solve the problem but there was no change.

  Hello @BryanMiller, hope you are well!

  Thanks to their participation in Forums of HP! I see by your post that you are having problems printing using printer Envy 5530. I will definitely do my best to help you.

  First of all, we will try to solve this problem using print HP and Scan Doctor (PSDR). PSDR is an automated tool that allows you to diagnose and resolve problems printing and scanning. Visit http://hp.care/2bZ9w2q to download and run the HP PSDR. Once you open the program, click on "Printing problems" to diagnose and fix the problem automatically.

  Please let me know if it works for you.

  Good luck!

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Envy 5530: Printing stops halfway through on the impressions of page multiple.

  We have two machines Windows 8.1 print wirelessly to a printer Envy 5530 and if we try to print a document of several pages, many applications, the printer stops printing half way a page, not the first, eject this page and does no more than the print job print, but will continue the work next in the queue. I made sure we use the latest version of the HP software and Windows is up to the updates.

  Hello
  Try following the steps below and check if this can help:
  -Open the HP software by clicking on the HP Envy 5530 icon in the desktop or the Start Menu, and then click on the link to the Home Page of the printer (EWS).
  -Click on the network tab.
  -According to the model of your printer, click Network, click Network (IP) address or click IPv4 in the active network connection type.
  -Manuel IP-click and then click on suggest a manual IP address. An IP address manually, the subnet mask and default gateway shows.
  * Be sure to take note of the IP address and confirm the changes, and then close the EWS page.
  -Click the HP Envy 5530 icon on the desktop or the Start Menu and click the utilities tab, and then click Update IP address.
  -Type the IP address that is configured manually, click on save and confirm.
  -Open the control panel and go to devices and printers.
  -Right click on the HP Envy 5530 icon and select printer properties.
  -Open the Ports tab.
  -Click on the button Add Port, select Standard TCP/IP and click New Port.
  -Follow the procedure by typing the IP address that is configured manually and confirm the changes.

  Now try printing and check if the problem solved.

  Kind regards
  Shlomi

• HP envy 5530 print too small to read more... How to change it w/windows 8 & Firefox... Help

  How can I change w/windows 8 & Firefox... Help... I have searched the forums, but can't find anything to help with the exception of windows7... I have windows 8 - I can NOT READ the IMPRESSION THAT COMES FROM THE ENVY5530!  PLEASE ANSWER!

  mygkids,

  Welcome to the HP Forum.

  You seem desperate and I'm sorry that it does not work.

  We don't quite know what you do or what you have tried to solve this problem.

  Here's the deal: a large part of the time, the difficulty has to do with the Application using a and printing scale selects prior to sending the document to the printer.  Usually we use print preview and adjusts the scale / size of the print goes to the printer.

  Some of the standard 'patches' are provided here:

  Change size print with preview before printing

  An exception / example:

  A member of the forum has recently indicated that it was necessary to print a particular type of medical output in the form of a program - form was printing with the evil of his printer font size when the same form printed the correct font to the printer at the office of his employer.  Involved workaround Print print output in a PDF file and preview the form to adjust the scale and correct the desired result.  It is not the desired solution; It produces the desired result.

  The point: what you need to do to fix your problem depends a lot on what you do in the first place.

  If nothing only that you can find help, HP Technical Support can ask for help.

  If the printer is new (ish) and you are in a certain geographical area in the world, you can always have a telephone support on the printer - you can call HP for support.  We can always ask to see if this is the case.

  Phone support period
  One year of phone support is available in North America, Asia Pacific and Latin America (including the)
  (Mexico). To determine the duration of phone support in Europe, the Middle East and Africa, go to
  www.hp.com/support. Paying company switchboard.

  Reference, Page 85: 5530 HP Envy eAIO User Guide

  Printer drivers HP e-all-in-one ENVY 5530

  =========================================================================

  Support Portal worldwide

  Contact telephone support HP - USA-

  Guarantee required - us. and Canada

  USA - contact HP / / Self-Help-Email - Chat

  Click on the Thumbs - Up Kudos to show that you appreciate the help and time of our Experts.

  Click on accept as Solution when the answer is a good solution or workaround!

  Although I strive to reflect best practices of HP, I do not work for HP.

• HP Envy 5530: HP Envy 5530 print show

  Hello

  I just finished setting to the top of my new printer HP Envy 5530.  Well, everything seems to work, including printing, except for one thing.  When I try to print an e-mail (gmail or hotmail), it print only part of the page.  In the Print Setup window, I know in advance that this will happen because I see what its about to print.  Else I feel is quite fine and the preview window also shows correct alignment.  My printer is connected to the wall.  I did the alignment of the printer twice without any problem.  Any suggestions?

  Hi @WillSF,

  I see that you have problems printing emails. I'd love to help you.

  Fix permissions of the drive on the Mac:

  Close all applications.

  In the Apple menu, click OK, click Applications, and then click utilities.

  Double-click disk utility.

  Highlight your hard drive / partition on the left.

  Click on check and then repair disk permissions.

  Restart the computer...

  Reset the printing system:

  Note: This will remove all printers in the print and Fax/Scan, any printer deleted can be re-added later by clicking the sign plus (+) symbol.

  Click on the Apple icon and then click on System Preferences.

  Click on Printers & Scanners.

  Make a right click (or Ctrl + click) in the left white side panel, and then click Reset printing system.

  Click OK to confirm the reset.

  Type the name and the correct password.

  Click OK to reset the printing system.

  Then click on the sign to add the driver, highlight the printer +. (you may need to click the drop down menu to select the name of the printer) Then click the Add button.

  Try a different browser to see if you have the same results.

  What browsers have you tried?

  If you appreciate my efforts, please click on the "Thumbs up" button below. Thank you.

• ENVY 5530: Print scanned pages is so slow!

  Hello world!

  My name is Flavio.

  I just bought an inkjet Envy 5530 and I really like it so far. But what happens is when I try to print pages that have been previously analysed and have some sort of texture in white (not pure white), printing is so slow, perhaps, it prints a half inch at a time, stops for 4 or 5 seconds and then print one more inch... it takes about 3 minutes to print one page...

  Is this supposed to happen with the inkjet printers?

  I know that with lasers, of course it is much faster, but I didn't know that the printers ink jet could be so slow!

  I think it has something to do with the White is not not totally white.

  Any help?

  Thank you!

  Hi @flaviolira123 ,

  Who would certainly slow printing down. The printer would take time put in detail in print.

  If it happened to other types of documents, I'd be a little worried.

  Have you tried printing in draft mode?

  Have you tried only shades of gray, black ink mode?

• ENVY 5530 printer takes forever to print my photos

  Envy 5530, just bought and put in place 2 days ago. Impressions in time resonable E-mail, pages of sites on line; but when I try to print from my personal computer, Photo Gallery, it may take 10 to 15 minutes for printing. The first day it accelerated after the first impression about 3 minutes, but now he is back for 10 to 15. Am I missing something here?

  Good news, vousLe printer works very well. I guess that any filing of a complaint of shame the 5530 in implementing in the form. Nice going HP!

• HP Envy 5530 (5534) is not printing special products

  I'm unable to print documents from an Office such as Microsoft Word or LibreOffice Writer product.
  If I print from Adobe Acrobat reader, a browser, or notepad it works fine.

  Scenario:
  -J' use the print dialog box in Word or Writer and select the correct printer (and have a default limit) and click on 'print '.
  -Action is correctly managed (seems treatment and the printer icon appears in the windows taskbar)
  - Is the thing: no print job is added to the queue of the printer (East remains empty) jobs are in the queue, but are removed directly without being print

  When I print from 'all' another application is the same, but a real print job is then added to the queue of the printer.

  Info:
  -J' have the latest printer drivers installed
  -J' tried to disable the firewall and virus scanner
  -printer is HP Envy 5534 (material is the same as 5530)

  What I tried:

  -When I use 'HP print and scan doctor' and follow the steps are all "fine" and the "test print" button leads to a successful impression.

  -reinstalled / printer driver

  -J' tried both local WiFi and via USB printing

  -When I try to manually add a printer by selecting the port 'HP discovery Port Monitor' I get the error 0x0000007b. Is this related?

  Does anyone have a solution?

  I contacted HP Support and they put a lot of effort to resolve this problem. Together, we spend about three of us and we finally found the cause: my computer has been infected by a virus (led).

  Viruses seem to Nestle between you and your printer even collect printed...

  This virus was not found by Microsoft Security Essentials.

  Because I was running as a user administrator, the faster (and better) way to get rid of the virus was to reinstall my PC.

  You can also try a decent anti-virus.

  After that everything works well again.

  I hope this helps others with the same printing problem.