Unavailable SPA962 in asterisk after call

Similar Questions

• Port resets the value after calling DAQmxStopTask.

  Hello? My device is PCI-6025E and I used to reset by sending 0x00 on #0 with DAQ digital output port. It must be reset if the VC software button power ++ is pressed.

  But after a trial of DAQmx, even after that I sent 0x00, it will be set the value of 0x00 to 0xFF after calling DAQmxStopTask. I want to know how do I know it's 0x00, ahead of DAQmxStopTask.

  I tried to read the port #0 when writing of 0x00 in this regard, but it hangs or it returns error; He said that the port is reserved and can not read the port until the task (in writing) is completed.

  Here is the code that I tested.

  error int = 0;
  TaskHandle taskHandle = 0;
  TaskHandle DItaskHandle = 0;
  uInt8 data = 0 x 00;
  char errBuff [2048] = {'\0'};
  Int32 wrote;
  Int32 read;
  uInt8 dataToRead;
  bool32 bTaskStatus;

  DAQmxErrChk (DAQmxWriteDigitalU8(taskHandle,1,1,10.0,DAQmx_Val_GroupByChannel,&data,&written,)); creaded the 6.5.2009
  DAQmxErrChk (DAQmxIsTaskDone (taskHandle & bTaskStatus));
  DAQmxErrChk (DAQmxWaitUntilTaskDone (taskHandle, 1.5)); 6.5.2009

  {if (bTaskStatus)}
  Reading test - DI on written port0-/ / / 6.5.2009
  DAQmxErrChk (DAQmxCreateTask("",&DItaskHandle));  6.5.2009
  DAQmxErrChk (DAQmxCreateDIChan (DItaskHandle, "port0/Dev1", "", DAQmx_Val_ChanForAllLines)); 6.5.2009
  DAQmxErrChk (DAQmxStartTask (DItaskHandle)); 6.5.2009
  DAQmxErrChk (DAQmxReadDigitalU32(DItaskHandle,1,10.0,DAQmx_Val_GroupByChannel,&dataToRead,1,&read,)); 6.5.2009
  printf ("acquired data: 0x%X\n",dataToRead "); 6.5.2009

  }

  Try to use the node property DAQmx to reverse digital lines.

  According to the that you configure DI / use the following

  Int32 __CFUNC DAQmxSetDOInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Int32 __CFUNC DAQmxSetDIInvertLines (TaskHandle taskHandle, const char [channel], data bool32);

  Kind regards

  Glenn

  Technical sales engineer

  National Instruments

• How can I activate the zoom pinch after calling preventDefault();?

  I created a chart in the edge animate which should work correctly on both the iPad and desktop computers. The html file that I create will be then fired in an iframe on a Web site as part of a larger page. I've included touch events and mouse for interactive elements, and most of the time it works fine on the desktop and iPads - except for when it is not.

  I found in my tests that sometimes a mouseOver/mouseEnter or even a click event fires despite my use of the e.preventDefault (); in my events touchStart or touchstart (I tried both). The behavior is not coherent enough for me to determine why this is happening so I have a solution for the moment - I've added preventDefault(); to touchStart in document.compositionReady:

  $(document) .one ('touchend', Function {}

  e.preventDefault ();

  });

  I understand that this is not ideal, but with deadlines and all that noise, it's the best solution I found to this day.

  It works perfectly, but as expected, it also disables the pinch zoom and pan. I don't care panoramic, but the zoom is necessary because the data points on the graph are on the small side. Can someone help me with the code, I would need to enable pinch zoom after call preventDefault()?: Or the conditional statement that would go preventDefault(); on a regular/single touch but not a pinch of touch zoom?

  I use v2014.1.1 to edge host CC on a Windows 7 machine, if it is useful.

  I cannot share my code because of the confidentiality agreement to my company, although if necessary I can probably model a simple sample - I'm hoping someone out there with more experience in the development of contact devices can point me in the right direction.

  Thank you!!

  Melanie

  This refurbished - Box dots.zip version handles the events of iOS. See private message.

  Tested: iPad (iOS 8.1.3) and MacBook (Mac OS 10.10.2) and Safari 8.0.3

  I will post a final version to improve the change of color and the text box.

• Space by default after calling model sup

  Hi all

  I call template void in the report of the rtf header. Even if there is no space between the header and the title of the report, when the preview image shows a gap between the title of model output and sub report. There are no spaces in the sub model. Is that it default rtf creates spaces after calling model sup in the header?

  Thank you

  Sushil

  Your sub-model code includes the text "DW DISCOUNT DATE:" in a table? If so, edit the property table in your subtemplate-> skin-> autour

  I think I sent you a model modified by e-mail and which included the fix.

  Thank you

  Bipuser

• Everyone knows the drivers of the device will not work after calling Camera.getCamera () so many times?

  Using Flash Player on Windows machines, since the Flash Player 11.4 version - Flash Player 15 (ActiveX version) and every version after that we had a problem in which Hauppauge PCIe and Videology cameras or other non-standard devices it does not work with Flash Player after calling getCamera() so many times. For example, we get the camera and publish a netstream for 10 minutes, then we have the camera set to null. Later, we call the camera again and after doing this 25 times or 100 times, the camera driver just seems to fail, and Flash Player is as is the streaming of the camera, but the NetStream info indicates zero-byte data video aired by indicating that there is no pixel coming from the camera.

  Someone else knows this problem to where you need to restart the browser or the Windows for Flash Player process power getCamera() properly again?

  Yes, it seems that others have experienced a similar problem. Adobe has not yet confirmed that it is a bug, but it is followed here:

  Bug #3850401 - handle with video.attachCamera leak leading to the unusable device

• Summary after call message balance or usage data

  I have lenovo s 820 it is not whose record after making a call, message or by using the data connection, how do I turn it on...

  try to install USSD to notification fm google game it solve my problem even in P780
  https://play.Google.com/store/apps/details?ID=com.Aeon.ussdtonotification

  of course restart handset after installation

• No signal after call

  I really want to keep complaining about the update. Especially since I waited for this for a long time. I like a lot of changes. I like the new UI, animations of the lollipop, the new voice of the bike, the new view of the bike with the additional information (except the ' fixing' of the vague bug!) But! A new bug, I've noticed, is that immediately after the end of a call (even after the rejection of an incoming call) the signal disappears for 1-2 seconds. Then he comes back! The reception is very good, where I am currently. It happens after each call, and it's boring! If anyone else noticed that?

  It is a problem of old age (I'm talking about Greece )

  https://forums.Motorola.com/posts/9caa9a2bea

  You have to live with it, no one of Motorola or forums will help... I had this problem since I bought the phone even after that and I got replacement and even after the 5.1 update.

• Difficulty with returns control to the parents program after call asynchronous Subvi

  I'm trying to set up a directory of context-sensitive help for one of my programs.  This is the first time I tried an asynchronous call and I can't seem to make it work properly.

  The attached HelpDir.vi is the parent program that gives the user different help files to choose.  When the user selects a help file, its Subvi should appear.  I would like the user able to let this help file upwards and close the help directory or select another help file to upsimulataneously, if they wish.

  The strange thing is that, currently, this vi works exactly as I want if I stress execution on, but works normally, the HelpDir.vi becomes unresponsive when we help files was loaded and becomes sensitive again once the help file has been left.

  I set up the parent program with a structure of the event running asynchronous call and forget everything as in the example of the expedition to the France so I do not know why the program parent is not recover control after the launch of the Subvi.  Please take a look and let me know if you see what I'm missing.

  PS, You may need to update both static references.  I don't know if they break when you send the code this way.

  Thank you

  Tim

  Change your dialogues float instead of Modal.  Modal windows will always be on top.  In the changing Floating, then you can access the window of your main VI as well.

  Performance highlight should substitute somehow the disorder of modal window.

• values of VO transitional passive get lost after call to sub - taskflow

  Hello

  I have a taskflow (topflow) which has a

  (1) activity of the initial method (a line is created in a transient VO and set the current row, as few attributes of the line are defined)

  (2) an activity of views that display the transient as VO form, it also has a button

  (3) and a subtaskflow (innerflow)

  When topflow is called the activity of the first method is called and the view is displayed and click on the button for inside taskflow is shown

  Internal flow has

  (1) an activity view with a button and

  (2) a return activity with food-Save-Point set to true

  When internal taskflow is called it displays a page with a button and clicking the button invokes the activity back-(bringing the user to view the topflow activity.)

  And there is a page that has topflow added as a region.

  I followed the following steps:

  (1) run the page - the activity of the initial topflow method is called and activity in the workflow view appears with the values of the transient VO.

  (2) click the button - the innerflow is called and shown.

  (3) click button taskflow internally - the user is taken to view the activity in topflow

  But after step 3, I see that the values in the transient VO are lost. (It shows as if there is no current line).

  I 'State of passivation' checkboxes 'Include all transitory values' in the selected transitional vo, also I put an attribute in the VO as a key attribute.

  But when I run the piece of code:

  Am = (AppModuleImpl) Configuration.createRootApplicationModule AppModuleImpl ("model. AppModule', 'AppModuleLocal');

  ViewObjectImpl vo = am.getTestTRVO ();

  Line = vo.createRow ();

  row.setAttribute ("Dept", "Math");

  row.setAttribute ("DeptId", "1");

  vo.insertRow (row);

  vo.setCurrentRow (row);

  The ID of the string = am.passivateStateForUndo (null, null, PASSIVATE_UNDO_FLAG);

  am.activateStateForUndo (id, ACTIVATE_UNDO_FLAG);

  Line = vo.getCurrentRow ();

  System.out.println ("Dept:" + row.getAttribute ("Dept"));

  Configuration.releaseRootApplicationModule (am, true);

  It prints the values correctly.

  No idea why this is happening? I use JDev version 11.1.2.2.0

  Thank you

  Anil

  Is - that the VO has "No. Rows" option set.

  > On the general page of the presentation Editor, expand the Tuning section and in the recovery of the database group box, select the option lines No..

  Other guidelines for transient VO are listed here Application state management

  In case if you still see the question, can you please share a test case where the problem can be reproduced?

• ResetButton CommandButton does not call after call in ADF 10.1.3.2

  Hello

  I have a search page and two button, a command button and a reset button.

  First time when I filled the farm and click on the reset button then close erase but when click the search button after that reset button does not work.

  See below the code look like this.

  <afh:rowLayout >

  < afh:tableLayout binding = "#{backing_enqAdvSrch.tableLayout6} '"

  ID = "tableLayout6" >

  < afh:rowLayout binding = "#{backing_enqAdvSrch.rowLayout18} '"

  ID = "rowLayout18" halign = "center" >

  < afh:cellFormat binding = "#{backing_enqAdvSrch.cellFormat30} '"

  ID = "cellFormat30" halign = "center" >

  "" < af:commandButton text = "search"

  Binding = "#{backing_enqAdvSrch.commandButton1} '"

  ID = "commandButton1."

  shortDesc = "click to search for the document.

  action = "#{backing_enqAdvSrch.doSearch} '"

  inlineStyle = "" text-align: center; ">"

  < af:setActionListener from = "#{bindings.types}" to = "#{processScope.types}" / > "

  < / af:commandButton >

  < / afh:cellFormat >

  < afh:cellFormat id = "cellFormat333" halign = "center" >

  < textAndAccessKey = af:resetButton "& amp; Reset "/ >"

  < / afh:cellFormat >

  < / afh:rowLayout >

  < / afh:tableLayout >

  < / afh:rowLayout >

  < / afh:tableLayout >

  < / h:form >

  Why not the second time calling reset

  Hello

  Below, I've used the code to reset my search form and its operation.

  JSP Page
  

  Below Line commented by Maroof on Aug 17 2013 Need to check before opening   -->
  
   
     
   
  
  

  Below Bean Method
  

   public void resetModel(ActionEvent actionEvent){
   this.inputText1.setValue("");
   this.inputText2.setValue("");
  .
  .
  .
  .
  }
  

  Maroof

• extra line after calling the model..? Call@:header? &gt;

  Hi all

  Whenever I call the RTF model, there is an additional features created after this call. For example there is an additional output of the call@header and ABC features although there are no spaces in the rtf. Is there a way to remove these additional lines?

  <? call@:header?

  <? Model: header? > region, address... <? end header? >

  ABC

  Thank you

  Sushil

  Use

  Thank you

  Bipuser

• LabView crashes after calling DLL

  Hello

  I'm working on a library that makes calls to the other dll, which is linked dynamically.

  I have to do this, customize the DLL search order before the call and add a few custom directories (where are the dll called).

  The called code works very well, and doesn´t in the DLL called memory leak, however LabView is suspended.

  It took me a long time to understand this, so I hope this helps someone in the future. Below is the solution.

  LabView uses its own research agenda DLL, so beware of assistance call "SetDefaultDllDirectories" regarding the whole process and LabView DLL management function will burst.

  Allways avoid using flags in the LoadLibraryEx.

• How can return control to original vi after calling sub - vi?

  Hi all

  Currently, I am facing the problem that once I call a subvi, control passes to the subvi.

  How can I program it that once I call a subvi, control passes to the subvi, complete the necessary task and return to the original and same vi can be redone in the loop?

  Your help would be very appreciated.

  Thanks in advance.

  Kind regards

  Nishant

  
  

• MovieClip will not add to the list after calling addChild()

  I have a MovieClip in the library who refuses to be added to the stage during his call with addChild(). Here's the code.

  You will see a function called clickedACTDD_BTN. You will also see that the function offers a choice if the MovieClip is present, then it is deleted. If it is not present, then this is given properties and added. Also, note my tracing instructions in each choice. All signs as expected but the MovieClip ever arises. I've been on that days code and just can't see what I did wrong. Everyone sees it?

  package
  {
  PAheader 1.0
  
  import flash.display. *;
  import flash.events. *;
  import flash.geom. *;
  
  SerializableAttribute public class PAheader extends MovieClip
  {
  public var headerScreen:Screen = Screen.mainScreen;
  public var hdrLogo;
  public var BLKback;
  public var PRFLAVTR:profileAvatarMC = new profileAvatarMC(); Profile avatar
  public var msgbubble:messageBubbleMC = new messageBubbleMC(); ToolTip
  public var magGlass:magnifyingGlassMC = new magnifyingGlassMC(); In the shape of magnifying glass
  public var ACTDD_BTN:ActionsDDBtnMC = new ActionsDDBtnMC(); ACTIONS drop-down list button.
  public var HISDropD_BTN:HistoryDDBtnMC = new HistoryDDBtnMC(); HISTORY drop-down list button.
  public var REPDD_BTN:ReportsDDBtnMC = new ReportsDDBtnMC(); Button drop-down list of REPORTS.
  public var actionbucket:ActionBucket = new ActionBucket();

  public void PAheader()
  {
  addEventListener (Event.ADDED_TO_STAGE, initPAheader);
  } / - End constructor public function PAheader().
  
  public void initPAheader(e:Event_=_null):void
  {
  trace("==============================================");
  trace ("PAheader called.");
  trace ("of PAheader: visibleBounds.width:" + headerScreen.visibleBounds.width + "visibleBounds.width:" + headerScreen.visibleBounds.height);
  addEventListener (Event.RESIZE, resizedHeader);
  
  BLKback.width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,1024);
  BLKback.scaleY = BLKback.scaleX;
  //------------- adding Assets ----------------------------------------------------------------------------------------- ---------------------------------
  
  -Avatar profile
  PRFLAVTR.x = stage.fullScreenWidth - PRFLAVTR.width - 10;
  PRFLAVTR.y = height/2-PRFLAVTR.height/2;
  addChild (PRFLAVTR);
  -The ToolTip
  msgbubble.x = PRFLAVTR.x - PRFLAVTR.width - 10;
  msgbubble.y = height/2 - msgbubble.height/2;
  addChild (msgbubble);
  -Shaped magnifying glass
  magGlass.x = msgbubble.x - msgbubble.width - 10;
  magGlass.x = msgbubble.x - msgbubble.width - 10;
  magGlass.y = height/2 - magGlass.height/2;
  addChild (magGlass);
  
  } // ----------------------------------------------------------------------------------------- -------------------------- End public function initPAheader().
  public void resizedHeader(e:Event_=_null):void
  {
  trace ("header REDIMENSIONNE");
  
  } // ----------------------------------------------------------------------------------------- ------------------------- End public function resizedHeader().
  
  public void addActionsDDButton(caller:MovieClip):void
  {
  trace ("addActionsDDButton. the appellant is: "+ calling);
  
  -ACTIONS button
  ACTDD_BTN. Width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,60);
  ACTDD_BTN.addEventListener (MouseEvent.CLICK, clickedACTDD_BTN);
  ACTDD_BTN.addEventListener (MouseEvent.MOUSE_OUT, outACTDD_BTN);
  ACTDD_BTN. ScaleY = ACTDD_BTN.scaleX;
  ACTDD_BTN.x = HISDropD_BTN.x - ACTDD_BTN.width;
  ACTDD_BTN.y = BLKback.y;
  caller.addChild (ACTDD_BTN);
  trace ("added ACTIONS!");
  
  } / / - End public static void addDDButtons().
  
  public void addHistoryDDButton(caller:MovieClip):void
  {
  trace ("addHistoryDDButton. the appellant is: "+ calling);
  -HISTORY button
  HISDropD_BTN.width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,60);
  HISDropD_BTN.scaleY = HISDropD_BTN.scaleX;
  HISDropD_BTN.x = headerScreen.visibleBounds.width/2 - HISDropD_BTN.width/2;
  HISDropD_BTN.y = BLKback.y;
  caller.addChild (HISDropD_BTN);
  trace ("added HISTORY!");
  } / / - End addHistoryDDButton() of the public service.
  
  public void addReportsDDButton(caller:MovieClip):void
  {
  trace ("addReportsDDButton. the appellant is: "+ calling);
  -The REPORTS button
  REPDD_BTN. Width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,60);
  REPDD_BTN. ScaleY = REPDD_BTN.scaleX;
  REPDD_BTN.x = HISDropD_BTN.x + ACTDD_BTN.width;
  REPDD_BTN.y = BLKback.y;
  caller.addChild (REPDD_BTN);
  trace ("added REPORTS!");
  } / / - End addHistoryDDButton() of the public service.
  
  / * function removeButtons(theCaller:MovieClip) public
  {
  If (theCaller.Contains (HISDropD_BTN): theCaller.contains (ACTDD_BTN): theCaller.contains (REPDD_BTN))
  {
  theCaller.removeChild (HISDropD_BTN);
  theCaller.removeChild (ACTDD_BTN);
  theCaller.removeChild (REPDD_BTN);
  }
  } / / - End public static void removeButtons(). * /
  
  public void clickedACTDD_BTN(e:MouseEvent_=_null):void
  {
  trace ("Clicked clickedACTDD_BTN!");
  If (Contains (actionbucket))
  {
  trace (this);
  removeChild (actionbucket);
  trace ("1");
  }
  on the other
  {
  trace (this);
  actionbucket. Width = AWSplash.resizeAsset(1024,headerScreen.visibleBounds.width,161);
  actionbucket.scaleY = actionbucket.scaleX;
  actionbucket.x = ACTDD_BTN.x;
  actionbucket.y = ACTDD_BTN.y + ACTDD_BTN.height;
  actionbucket.y = ACTDD_BTN.y;
  addChild (actionbucket);
  trace ("2");
  }
  } / / - End clickedACTDD_BTN() of the public service.
  
  public void outACTDD_BTN(e:MouseEvent_=_null):void
  {
  If (Contains (actionbucket))
  {
  detectTarget (actionbucket);
  }
  } // ----------------------------------------------------------------------------------------- -------------------------- End public function outACTDD_BTN().
  
  public void detectTarget(target:MovieClip):Boolean
  {
  var mousePoint:Point = target.localToGlobal (new Point (target.mouseX, target.mouseY));
  If (Target.hitTestPoint (mousePoint.x, mousePoint.y))
  {
  trace ("equity bucket!");
  Returns true;
  }
  on the other
  {
  trace ("not on STOCK bucket!");
  Returns false;
  }
  } // ----------------------------------------------------------------------------------------- -------------------------- End public function detectTarget().
  } // ========================================================================================= ======== End public class PAheader{}.
  } // ========================================================================================= =================== End package{}.

  my mistake, this.addChild (this) is not going to work.

  PAheader is a class and a class is not on stage.

  an instance of the class could be on stage, however.

  and another instance might not be on stage.

  just because you see something that is a member of PAheader class, or maybe just looks like a class member, does not mean that all instances, or even none, are on stage.

  to be sure: trace (this.stage) = null, means the instance you are checking is not on stage.

  "(and I don't know where you want to add this instance of the class, but, assuming that your document is a MovieClip and not a Sprite), MovieClip (root) .addChild (this) might work, although it's bad coding."  and stage.addChild (this) of colin will not work because the stage is not defined in this class.

• Additional namespace was added after calling SOAPBody.addDocument (xmlDoc)

  Hi all
  I'm working on adding SAMLRequest SOAP message using the saaj api 1.3.4 with Java1.5
  However, when I add the doc XML using SOAPBody.addDocument (), additional namespaces have been added to the soapBody
  The XML that I'm trying to add is:
  < samlp:Request RequestID = "mhdefhnhjladllhdlfeihkcbbcabakodmnnmbjdl" MajorVersion = "1" MinorVersion = "1" IssueInstant = "" 2013-01 - 11 T 00: 31:49.492Z "xmlns:samlp =" urn: oasis: names: tc: SAML:1.0:protocol ' > < samlp:AssertionArtifact > QUFFWm9QMkF1N1dCNE1PbHIyS3FUQXlQaTJWR0dXUzB5VmNpUm0vMUtIZ0RQbytjWnFGcFNoSlA = < / samlp:AssertionArtifact > < / samlp:Request > "
  
  After soapBody.addDocument (doc)
  I get
  < soapenv:Envelope xmlns:soapenv = 'http://www.w3.org/2003/05/soap-envelope' >
  < soapenv:Body xmlns:samlp = "urn: oasis: names: tc: SAML:1.0:protocol" >
  < samlp:Request xmlns:axis2ns2 = "urn: oasis: names: tc: SAML:1.0:protocol ' IssueInstant =" ' 2013-01 - 11 T 00: 31:49.492Z "MajorVersion ="1"MinorVersion = RequestID '1' ="mhdefhnhjladllhdlfeihkcbbcabakodmnnmbjdl">"
  < samlp:AssertionArtifact xmlns:axis2ns3 = "urn: oasis: names: tc: SAML:1.0:protocol" > QUFFWm9QMkF1N1dCNE1PbHIyS3FUQXlQaTJWR0dXUzB5VmNpUm0vMUtIZ0RQbytjWnFGcFNoSlA = < / samlp:AssertionArtifact >
  < / samlp:Request >
  < / soapenv:Body >
  < / soapenv:Envelope >
  
  
  As you can see, 'xmlns:axis2ns2', 'xmlns:axis2ns3' are added to the SAMLRequest and the body a xmlns:samlp namespace.
  
  Here's how I did this:
  
  String artRequest = buildSAMLRequest (samlArt);
  soap message construct
  DocumentBuilderFactory builderFactory = DocumentBuilderFactory.newInstance ();
  builderFactory.setNamespaceAware (true);
  InputStream stream = new ByteArrayInputStream (artRequest.getBytes ());
  Doc document = builderFactory.newDocumentBuilder () .parse (stream);
  Mf12 MessageFactory = MessageFactory.newInstance (SOAPConstants.SOAP_1_2_PROTOCOL);
  SOAPMessage message = mf12.createMessage ();
  SOAPBody soapBody = message.getSOAPBody ();
  soapBody.addDocument (doc);
  
  
  as output to the HTTP connection string
  ByteArrayOutputStream xmlout = new ByteArrayOutputStream();
  message.writeTo (xmlout);
  String strMsg = new String (xmlout.toByteArray ());
  
  
  
  Does anyone have an idea how I can get rid of the extra namespace?
  
  Thank you very much
  David
  
  Published by: 898054 on January 10, 2013 16:46

  It seems that you are using axis2. You can get more help ask your question in a forum of axis2.