undocumented features?
In the thread "ICS 1200 mhz", screenshots were used (market volume buttons / stop and lower), what other features are not in my manual, and they appear somewhere?
Just curious what other features/functions may be available.
Thank you.
You must press and hold the power and volume down until he takes the picture.
Tags: Motorola Phones
Similar Questions
-
Feature Request: A way to enter an edit_field 'New Line'.
And, if there is a way to make it obvious in the API and documents.
Thank you
Rob
Answer: the value allow_newlines = true in edit_field, for example
{VF:edit_field}
-- ...
allow_newlines = true,
}
Enter/return key will have the desired effect: a newline instead of OK'ing the dialog box.
PS - credit to John Ellis for me/us about this undocumented feature.
-
Can not activate HotSpot for Atrix LapDock
Was in an airport this week with a traveling companion. Had my LapDock with me and time that's happening on the Web. My companion was aware of my equipment and asked if he could use my Hotspot for his laptop. Of course, I said.
Then I spent several minutes trying to get it to turn on. Finally took the Atrix off the LapDock and things would turn out. Back in the LapDock and stayed connected and I'm back to what I was doing. He later died still in dock, but could not turn on again as before.
Searched around that and found nothing of not being able to activate the HotSpot while in the LapDock. Activates / deactivates when fine in my Dock of Messrs. 1.8.3 running stock at the moment.
"Undocumented feature" or is something broken on my equipment?
-
CVI2009 post-build Action not working
Hi all
In CVI2009, I am trying to add a command to copy the output of the DLL from a project to a bin above the source file directory.
I tried the following command line in the post-build Actions:
xcopy MyDll.dll...... \Bin /Y
It works fine when I run it in a window Cmd, or as a batch file. But when I try to add to the post-build Action, I get a message that says: "cannot build. CVI could not perform one or more of your generation steps. »
I tried to call a batch file with the command of the CALL, but not luck. I do not see what happens when the build is running because the window > build output option is grayed out.
I tried this with the special variables and as hard-coded text, but I didn't see any difference.
I have read and tried everything I can in the help and forums. Any ideas on what I'm doing wrong here?
-Jack
Hi LuisG,
I take a look at this, but this option requires a hard-coded path and don't like "...-..." \Bin"as a path. As we use the source control, the full path may change depending on the occasion. I appreciate the suggestion, however, as this is a fallback option that could have been used.
Hi Menchar,
For some reason that I can't identify, since this morning I now get the window out of build and he tells me I have problems of prototype and definition of type issues. Once I deleted those upward, I tried to add the command to the following generation and it worked as expected. I can only assume that something was not quite right with the sign of the function and the while he let my version of the DLL, it was hide its problems and the window out to build. I can bring to the top of the Build output window in the window menu, and he documented the process as described in the help. I don't know what I did to make this early work, as I've been in and out of the header, the source and the files before .fp, I noticed that it worked.
I go to this place of chalk as a CVI undocumented "Feature" and move on. Thanks for the help!
-Jack
-
I am trying to eliminate all the stamps image created with a model name as MyImage + {Datetime stamp}. Unfortunately, I do not know what is their date timestamp. I think the best way to do is to get a list of all the names of the buffer image and selectively remove ones that I don't have anymore. Is there a way to get a list of all buffers to image? Other means of removal of model?
Well, now understand - you need to get the list of the created images. Then the functional method with globals will be good for you. Also you can get the list of all the images of Vision of NOR (see status in
IMAQ \vision\Compatibility.llb) - but this method seems to be 'undocumented feature '. In any case example with the two methods in room attached.
Andrey.
-
Restore my computer to an earlier time
How can I restore my computer to an earlier time? I go through the restore process, but I get the message "no changes have been noted" to several previous restore points. I made changes such as the Elimination of programs, etc.
What is your system brand and model?What is your Version of XP and the Service Pack?Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)? System Restore is not a time machine.
Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.For example, if you use Norton/Symantec products, you will see a message like this:Restoration incomplete. Your computer cannot be restored...It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore. Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore. It works for some configurations.System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore. This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore. You don't have to reinstall XP, only the part of system restore.That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).Give these ideas some consideration if they apply to you.Sometimes malicious will afflict your system restore to prevent you to find and remove malware. It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.No matter what you use for protection against malware, I do so and then only begin to solve any problems:Download, install, update and do a full scan with these free malware detection programs can solve any problems:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/It can be uninstalled later if you wish.The scans by operating clean, reboot, test and we can fix any other issues. -
Original title: restoration works not
The weight restoration on my machine does not work. I've highlighted the dates but I get... impossible to restore messages. I tried switching off my virus checker (Norton) but with the same result.
Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.For example, if you use Norton/Symantec products, you will see a message like this:Restoration incomplete. Your computer cannot be restored...It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.
It works for some configurations.
-
I'm having problems to restore Windows XP with service 3, whenever I go to the station Windows, Windows tells me that nothing has changed. Can someone help me with this problem
Unfortunately, the implementation of MS Answers forums does not prompt for any information system when a new question is asked, so we don't know anything on your system.
Not knowing the basic informations of a problem prolongs the frustration and the agony of these issues, but that's the way they choose to turn things around here.
Thank you owners MS Answers, continue to make solving simple problems as frustrating and a lot of time as possible.
What is your system brand and model?
Describe your current antivirus and software anti malware situation: Microsoft Security Essentials (MSE), McAfee, Symantec, Norton, Spybot, AVG, Avira!, Panda, Trend Micro, CA, Defender, ZoneAlarm, Comodo, PC Tools, etc.
What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)? Remember that the system restore is not a time machine.
Have you ever used the system restore to restore your system in the past?
Describe exactly what happens when you try to perform a system restore and the error messages you see which indicates that it does not work (some thing besides 'it does not work").
Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
For example, if you use Norton/Symantec products, you will see a message like this:
Restoration incomplete. Your computer cannot be restored...
It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore. Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore. It works for some configurations.
Note that if you do a Safe Mode system restore, you will not be able to cancel it and there is no option on the System Restore screen for "Undo my last restoration" as you would if you were to restore your system from a normal startup.
Give these ideas some consideration if they apply to you.
Sometimes malicious will afflict your system restore to prevent you to find and remove malware. It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
No matter what you use for protection against malware, I do so and then only begin to solve any problems:
Download, install, update, and make at least a full scan with these free malware detection programs can solve any problems:
Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/It can be uninstalled later if you wish.
The scans by operating clean, reboot, test and we can fix any other issues.
System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore. This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore. You don't have to reinstall XP, only the part of system restore.
That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
-
professional XP System Restore does not
My system restore doesn't work on my xp professional and I think that there are errors in registry. Can anyone help please?
What does "does not?
Why do you think there are errors in the registry?
What is your system brand and model?
What is your Version of XP and the Service Pack?
Describe your current antivirus and software anti malware situation: Microsoft Security Essentials (MSE), McAfee, Symantec, Norton, Spybot, AVG, Avira!, Panda, Trend Micro, CA, Defender, ZoneAlarm, Comodo, PC Tools, etc.
What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)? Remember that the system restore is not a time machine.
Have you ever used the system restore to restore your system in the past?
Describe exactly what happens when you try to perform a system restore and the error messages you see which indicates that it does not work (some thing besides 'it does not work").
Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
For example, if you use Norton/Symantec products, you will see a message like this:
Restoration incomplete. Your computer cannot be restored...
It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us?product=home&version=1According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore. Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore. It works for some configurations.
Note that if you do a Safe Mode system restore, you will not be able to cancel it and there is no option on the System Restore screen for "Undo my last restoration" as you would if you were to restore your system from a normal startup.
Give these ideas some consideration if they apply to you.
Sometimes malicious will afflict your system restore to prevent you to find and remove malware. It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
No matter what you use for protection against malware, I do so and then only begin to solve any problems:
Download, install, update, and make at least a full scan with these free malware detection programs can solve any problems:
Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/It can be uninstalled later if you wish.
The scans by operating clean, reboot, test and we can fix any other issues.
System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore. This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore. You don't have to reinstall XP, only the part of system restore.
That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
-
Why XP won't come back successfully saved restore point or checkpoint?
Whenever I try to go back to a restore either point, I created (before making a change or install something again) or a checkpoint restore point, restoring always fails. I receive no information on the reason, it just says: it has failed and that "no files have been changed. I think this situation has prevailed on this machine because I got it. Any suggestions why this is happening and what to do about it?
What is your system brand and model?
What is your Version of XP and the Service Pack?
The afflicted system has a working CD/DVD (internal or external) drive?
You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?
Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)? Remember that the system restore is not a time machine.
Have you ever used the system restore to restore your system in the past?
Describe exactly what happens when you try to perform a system restore and the error messages you see which indicates that it does not work.
Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
For example, if you use Norton/Symantec products, you will see a message like this:
Restoration incomplete. Your computer cannot be restored...
It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore. Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore. It works for some configurations.
System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore. This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore. You don't have to reinstall XP, only the part of system restore.
That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
Give these ideas some consideration if they apply to you.
Sometimes malicious will afflict your system restore to prevent you to find and remove malware. It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
No matter what you use for protection against malware, I do so and then only begin to solve any problems:
Download, install, update, and make at least a full scan with these free malware detection programs can solve any problems:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/It can be uninstalled later if you wish.
The scans by operating clean, reboot, test and we can fix any other issues.
-
None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.
What is your system brand and model?
What is your Version of XP and the Service Pack?Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)? System Restore is not a time machine, but of course, this should work if you think you need.Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.For example, if you use Norton/Symantec products, you will see a message like this:Restoration incomplete. Your computer cannot be restored...It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore. Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore. It works for some configurations.System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore. This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore. You don't have to reinstall XP, only the part of system restore.That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).Give these ideas some consideration if they apply to you.Sometimes malicious will afflict your system restore to prevent you to find and remove malware. It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.No matter what you use for protection against malware, I do so and then only begin to solve any problems:Download, install, update and do a full scan with these free malware detection programs can solve any problems:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/It can be uninstalled later if you wish.The scans by operating clean, reboot, test and we can fix any other issues
-
How to: Restore my computer to an earlier date
Original title: I can't restore my computer to this day of erlear
I can't restore my computer to this day of erlear
As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.
Not knowing the basic information a problem prolongs the frustration and the agony of these issues.
Also, we don't know what happens when you try to restore your computer - not to mention that it does not work!
See how it works and answer questions, better you can:
What is your system brand and model?
What is your Version of XP and the Service Pack?
The afflicted system has a working CD/DVD (internal or external) drive?
You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?
Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)? Remember that the system restore is not a time machine.
Have you ever used the system restore to restore your system in the past?
Describe exactly what happens when you try to perform a system restore and the error messages you see which indicates that it does not work.
Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
For example, if you use Norton/Symantec products, you will see a message like this:
Restoration incomplete. Your computer cannot be restored...
It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore. Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore. It works for some configurations.
System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore. This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore. You don't have to reinstall XP, only the part of system restore.
That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
Give these ideas some consideration if they apply to you.
Sometimes malicious will afflict your system restore to prevent you to find and remove malware. It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
No matter what you use for protection against malware, I do so and then only begin to solve any problems:
Download, install, update, and make at least a full scan with these free malware detection programs can solve any problems:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/It can be uninstalled later if you wish.
The scans by operating clean, reboot, test and we can fix any other issues.
-
recover system restore points after disk cleanup
Original title: System Restore
I wanted to save space on my C drive, I went to my computer and click on properties on the Local C drive, and click on disk cleanup. Under the section more Options, it showed that I could free more disk space by removing all but the last restore point. I did this and realized it was a mistake, because now I can't use the restore of the system at all. Is there a way to reset it so I can use the restoration of the system again. I tried to uncheck the box that said system off, and that did not help. Thank you.
Help me out here... I don't get it.
You have lost all your SR points by pilot error.
You then make a new manually restore Point, restart, try to use the system for the new Restore restore point and then get a message that says that something wasn't right?
That's exactly the message says?
Something like that?
Restoration incomplete. Your computer cannot be restored...This often happens in the real world, and you need to understand and fix.Answer these questions to the best you can:What is your system brand and model?What is your Version of XP and the Service Pack?Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)? System Restore is not a time machine.Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.For example, if you use Norton/Symantec products, you will see a message like this:Restoration incomplete. Your computer cannot be restored...It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore. Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore. It works for some configurations.System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore. This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore. You don't have to reinstall XP, only the part of system restore.Do, or do not. There is no test.
I decided to implement the points for a new puppy instead of a pony!
-
How can I restore it to work again? Ity will restore to any point of control.
I tried to use Restrore at each checkpoint blackened. The message says: "cannot be restored to this point of control."
As the forums MS Answers does not prompt for any information system when a new question is asked, we know absolutely nothing about your system.
Not knowing the basic information a problem prolongs the frustration and the agony of these issues.
What is your system brand and model?
What is your Version of XP and the Service Pack?
The afflicted system has a working CD/DVD (internal or external) drive?
You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?
Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)? Remember that the system restore is not a time machine.
Have you ever used the system restore to restore your system in the past?
Describe exactly what happens when you try to perform a system restore and the error messages you see which indicates that it does not work.
Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
For example, if you use Norton/Symantec products, you will see a message like this:
Restoration incomplete. Your computer cannot be restored...
It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore. Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore. It works for some configurations.
System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore. This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore. You don't have to reinstall XP, only the part of system restore.
That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
Give these ideas some consideration if they apply to you.
Sometimes malicious will afflict your system restore to prevent you to find and remove malware. It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
No matter what you use for protection against malware, I do so and then only begin to solve any problems:
Download, install, update and do a full scan with these free malware detection programs can solve any problems:
Malwarebytes (MMFA): http://malwarebytes.org/
SUPERAntiSpyware: (SAS): http://www.superantispyware.com/It can be uninstalled later if you wish.
The scans by operating clean, reboot, test and we can fix any other issues.
-
System restore failed: no changes made to the computer (Windows XP sp3)
Hello. When I use the system restore, the program looks good until you restart. Next, I get a Sys Res window that says simply "system restore was not entirely successful. No changes have been made to your computer. »
The help file repeated that the Sys res window.
I made sure that the system restore service is, in fact, running. Also the Message Center does not appear to give any errors related to the system restore.
I tried several restore points the past two days, including a checkpoint of the system.
The rest of my computer works like a charm, save a program that I really need work. I want to go back a few edits I made (which had nothing to do with the programs of bricks) to see if for some reason, it would work. Any help appreciated. Thanks in advance.
I understand that you use Norton or McAfee, but I stick my standard "System Restore does not" answer for you to read and meditate.
Microsoft suggests that if SR does not behave, sometimes it will behave if you start in Mode safe then give a whirl. It could also be that your SR is reached, you must reinstall (you don't have to reinstall XP - only the part of SR).
Here you go:
What is your system brand and model?What is your Version of XP and the Service Pack?The afflicted system has a working CD/DVD (internal or external) drive?
You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?
Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)? Remember that the system restore is not a time machine.Have you ever used the system restore to restore your system in the past?
Describe exactly what happens when you try to perform a system restore and the error messages you see which indicates that it does not work.
Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
For example, if you use Norton/Symantec products, you will see a message like this:Restoration incomplete. Your computer cannot be restored...It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore. Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore. It works for some configurations.System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore. This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore. You don't have to reinstall XP, only the part of system restore.That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).Give these ideas some consideration if they apply to you.Sometimes malicious will afflict your system restore to prevent you to find and remove malware. It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.No matter what you use for protection against malware, I do so and then only begin to solve any problems:Download, install, update and do a full scan with these free malware detection programs can solve any problems:Malwarebytes (MMFA): http://malwarebytes.org/SUPERAntiSpyware: (SAS): http://www.superantispyware.com/It can be uninstalled later if you wish.The scans by operating clean, reboot, test and we can fix any other issues.
Maybe you are looking for
-
I have Mac OS 10.9.5 and avi files will not play even with VLC. What can I use?
How can I play an AVI on Mac OS 10.9.5 when VLC does not work?
-
IPhone 6s requiring a password reset every few weeks
My iPhone 6 more (IOS 9.3.2) continues to ask me to change my password to 4 digits to unlock the phone every few weeks. It started only a couple of months. It's extremely annoying, as at the time wherever I automatically remember the new password, I
-
Why when I open the other Web site I don't see photo
the website asialadyintroductions.com when I open it, I don't see the pictures of me and my friends colleagues... Why URL of affected sites http://www.asialadyintroductions.com
-
Why the producer s Comsumer loop transfer '0'?
I have a producer loop produce ' 1 'and ' 0', then I try to transfer '0' or 1' produced in loop of consumer. Initially, I get '0 ' for the consumer, but once the '1' is tansfered to it, the "1" will always be in the loop of consumption, '0' will not
-
PHOTOS OF WEBCAM LIVE GALLERY MOVI MAKER
HelloManaged to burn a movie on windows movie maker but when I click on browse in movie maker I only get those who is there, but I can't seem to get those who are in the Windows live gallery, can you please tell me how to move them movie maker in sim