Universal Serial Bus (USB) Controller driver required
Hi, can someone give me a link to download the USB driver above for my Compaq Elite 8300 Energy Star?
The hardware Id is:
PCI\VEN_8086 & DEV_1E31 & SUBSYS_3397103C & REV_04
I am running Windows 7 Enterprise 64-bit
Thanks in advance
Wack
Hi Wack,
Try the following.
First, right-click on each 'unknown' device and select uninstall.
Once complete, download and reinstall the Chipset driver at the following link.
When this is complete, restart and check the Device Manager - if errors are back, try to reinstall the Intel USB 3.0 driver and restart.
Kind regards
DP - K
Tags: HP Desktops
Similar Questions
-
Universal Serial Bus (USB) Controller, pilot missing
Nice day
I had to reimage my laptop Dell Latitude 3540, who recently bought with Windows 7 Enterprise 64-bit, and although I could install all drivers successfully, I have a yellow exclamation mark on my device manager next to (USB) Universal Serial Bus controller. I sought the support of drivers @ Dell, I installed the software My Dell and even installed the driver Intel utility update but could not solve the problem. Would you be kind enough to advise me on how to solve this problem?
Thanks for the post of EJN63 but I already have sp1 and I used these drivers on my initial install.
However, I just thought about it: I did a search of the Bus USB controller hardware id and noticed on the 3540 Dell chipset is Intel 8 running on the processor Interl i5 4th Gen. So I did a search for drivers USB 3.0 on the Intel site and installed successfully.
-
HP EliteBook 8560w: pilot Universal Serial Bus USB Controller
Hello
I installed new windows 7 64 bit. I installed all the drivers, BUT the USB controller driver is not install I have tried all the drivers available for my mobile chipsets. Download HP Support Assisstance. Please send me the link or guide me.
Thank you
Hello:
Here is the link for the driver of the USB3, you must...
FTP://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54511.exe
If the driver does not install the device automatically, try to manually install the driver the usb controller device and navigate to the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\sp54511. Make sure that the include subfolders is selected.
-
Universal Serial Bus (usb) controller - the missing driver problem
- Hi all.
- Name of the product and operating system: HP (Notebook) 15-r003sv - Windows 7 x 64
- Product no.: G7E53EA #AB7
This laptop has windows 8 and everything works fine, then I installed windows 7 x 64 and I have problem with the usb ports. they do not work and are of unknown devices
I tried everything posted on the internet, but nothing.
How can I find a driver for USB controller for my device?
Thank you to
* Also, I installed 3 drivers in my page of devices support for hp drivers (sp66602 etc, under the chipset). It extracts to a folder, I found and run but said the error message "this computer does not meet the minimum requirements for installing this software.
Hi all!
The problem is resolved.
Thank you all to try it.Now, the magic software that solved my problem was "pilot identifier. (I didn't know it)
It can detect unknown hardware ID devices (as you did) and recommends drivers for them.
The pilot who was the solution has been Intel USB 3.0 eXtensible host controller driver.
They are different but you choose the one that is compatible with your chipset.Pilot identifier recommend correct.
Installation: Just run a single setup.exe, and that's all!
Thank again!
-
Universal series (Bus) USB controller driver
I can't find the driver for my HP Pavilion Notebook 15-0n043ee
Here's my hardware ID:
PCI\VEN_8086 & DEV_9C31 & SUBSYS_2166103C & REV_04
PCI\VEN_8086 & DEV_9C31 & SUBSYS_2166103C
PCI\VEN_8086 & DEV_9C31 & CC_0C0330
PCI\VEN_8086 & DEV_9C31 & CC_0C03
I tried to search to pcidatabase.com that I couldn't find it.
Windows 7 64 bitHello:
This driver should work...
-
Aspire driver E5-551 Windows 7 Universal Serial Bus (USB)
I installed Windows 7 in Acer Aspire E5 - 551G, but there doesn't seem to be an operating system that is supported by ACER, because on the page to download ACER drivers, drivers are available only for Windows 8.1
I found manually and installed successfully the various drivers for Windows 7, but I'm not able to find the appropriate driver for the "pilot of Serial Bus universal (USB)", and I guess that's the reason for a USB connection that does not work.
Anyone know which is the correct driver?
Thank you
the 2 missing IDs are in the drivers VGA AMD chipset/USB (), try this:
-
Laptop HP 15-g010nd: Bus USB controller driver
Hello
I installed Windows 7 and it works fine but I lost 2 USB ports in the course of the.
Apparently the two pilots are missing:1 SM bus controller
2 Bus USB controllersI spent a few days trying to find these drivers but without success.
Please help me to find a cure for these lost two USB ports, I need them.Thanks in advance
Hello:
See if these drivers work...
USB: Both install and reboot.
SMBus: You need to manually install this file. Download and run it.
http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=vc_141467_1
Go to Device Manager, and then click the controller smbus who need the driver.
Click the driver tab. Click on set to update driver. Select her browse my computer for driver software option and find the folder of the driver that was created when you ran the file.
This file will be located in C:\SWSetup\spsp63993.
Make sure that the include subfolders is selected and the driver should install.
Then restart.
-
HP Pavilion dv7 Notebook PC: controller missing Universal Serial Bus (USB)
HP Pavilion dv7 Notebook PC (dv7-6c23cl)
A7B11UA #ABA
Win 7 Home Premium sp1 x 64
I have two USB ports showing missing drivers in Device Manager. I tried to install the missing driver with the driver update feature, no driver not found. Any help would be greatly appreciated.
Device status:
The drivers for this device are not installed. (Code 28)
There is no driver selected for the item or a set of device information.
To find a driver for this device, click Update driver.Hardware ID:
PCI\VEN_1022 & DEV_7812 & SUBSYS_3591103C & REV_03
PCI\VEN_1022 & DEV_7812 & SUBSYS_3591103C
PCI\VEN_1022 & DEV_7812 & CC_0C0330
PCI\VEN_1022 & DEV_7812 & CC_0C03Let me know if you need other information.
Hello:
Install both of these drivers and restart the PC:
-
Pavillion Sleekbook 14-b110us: controller Univsersal Serial Bus (USB) driver
I have installed Windows 7 (64 - bit) on my Pavillion Sleekbook 14-b110us.
But the problem is that this laptop originally installed window 8 by HP.
This is why all the drivers are not available for Windows 7 by HP.
I installed by my self with a component.
I need drivers as below.
Universal Serial Bus (USB) controller PCI\VEN_1022 & DEV_7812 & SUBSYS_1937103C & REV_03\3 & 2411E6FE & 1 & 80
I have try all the methods that I can get. But I could ' t find the right drivers.
Please help me. Thank you.
AMD USB 3.0 host controller
-
DV6-6b51ea: the problematic driver, Universal serial bus installation does not
Hi, is it possible to also help me find the right drivers?
This is the id of the hardware:
Universal Serial Bus (usb) controller:
PCI\VEN_1033 & DEV_0194 & SUBSYS_1658103C & REV_04
PCI\VEN_1033 & DEV_0194 & SUBSYS_1658103C
PCI\VEN_1033 & DEV_0194 & CC_0C0330
PCI\VEN_1033 & DEV_0194 & CC_0C03
Unknown device:
ACPI\HPQ0004
* HPQ0004
Unknown device:
USB\VID_138A & PID_0018 & REV_0078
USB\VID_138A & PID_0018
Also, I installed a new windows 7 64 - bit, I hardly did to install allmost all the drivers from this link:
Most of the pilots could not be installed, telling me that I am suggesting not all system requirements to install this specific driver...
I'm strugeling with my Amd Radeon graphics card install also, in device manager says: Windows has stopped this device because it has reported problems. (Code 43).
I went to the Amd Web site, I download from there is version 14.501.1003.0 for Amd Radeon HD series 7400 M (same dough I remember that I have a series of 6xxxm on my laptop). It didn't matter how hard I tried to install the correct driver, only this one worked...
A year and a half a go on my model laptop that it's really simple to get all the correct drivers drivers hp supports, but now... There are a lot of drivers than mach doesen't with my machine.
my product is: QG799EA #ABU, model: dv6-6b51ea with core i5, 6 GB of ram (if this is important).
Believe me, I've installed windows on a large number of PCs and laptops, but as mine... ever... .to fight so hard to do things... 6 hours...
Well, I hope you can help me with this. Sorry that I have several questions to a post...
Hello:
You need these drivers for devices:
PCI\VEN_1033 & DEV_0194:
ACPI\HPQ0004:
USB\VID_138A & PID_0018 & REV_0078:
The only graphics driver that you can install is this one. Do NOT install the stand-alone Intel graphics driver.
This driver installs the drivers for the AMD and Intel graphics processors switchable.
-
Pavilion of 500-118 usb controller driver
I wish to install Windows 7 on a 500-118 Pavilion and can not find the driver for the Universal Serial Bus (USB) controller and it's why some USB ports do not work.
Yes I realize that this operating system came with this system and there are no drivers on the HP web site for it. Fortunately, I was able to find all the drivers except this one OEM.
Any ideas?
Thank you
Todd
Hi, Todd:
You need to that of controller 3 usb driver for the chipset of your model...
-
HP Envy Touchsmart E0K45UAR: Envy of HP Touchsmart E0K45UAR USB Controller Driver
Hello
Computer details:
HP Envy Touchsmart E0K45UAR
8.1 Windows Professional x 64
I have a USB controller, who decided to uninstall itself this morning and I'm unable to get it working again. This was noted during the user's usb keyboard stops working, but the keyboard and the standard touchpad work very well. I can't get any other USB periphials to work on this computer.
The Windows Device Manager shows "other devices / Universal Serial Bus (USB) Controller" with a yellow exclamation point icon.
Hardware ID:
PCI\VEN_8086 & DEV_9C31 & SUBSYS_190E103C & REV_04
PCI\VEN_8086 & DEV_9C31 & SUBSYS_190E103C
PCI\VEN_8086 & DEV_9C31 & CC_0C0330
PCI\VEN_8086 & DEV_9C31 & CC_0C03I tried to remove the controller device manager USB, then picking up Windows to automatically reinstall USB controller drivers, it did not help.
Logs of events coming from the activities of this morning show the following:
configured device 20150617_070336 (Null)
Device PCI VEN_8086 & DEV_9C31 & SUBSYS_190E103C & REV_04\3 & 11583659 & 0 & A0 has been configured.Driver name: null
The class GUID: {00000000-0000-0000-0000-000000000000}
Driver date:
Driver version:
Driver provider:
Section of the driver:
Rank of pilot: 0x0
Matching device ID:
Advanced driver:
Update of the device: true20150617_074754 deleted device
Device PCI VEN_8086 & DEV_9C31 & SUBSYS_190E103C & REV_04\3 & 11583659 & 0 & A0 has been removed.The class GUID: {00000000-0000-0000-0000-000000000000}
configured device 20150617_074855 (Null)
Device PCI VEN_8086 & DEV_9C31 & SUBSYS_190E103C & REV_04\3 & 11583659 & 0 & A0 has been configured.Driver name: null
The class GUID: {00000000-0000-0000-0000-000000000000}
Driver date:
Driver version:
Driver provider:
Section of the driver:
Rank of pilot: 0x0
Matching device ID:
Advanced driver:
Update of the device: falseI'm sure that there is a problem with the drivers, but I can't find the USB drivers on the HP support page for this model of computer downloads.
Thanks in advance for any help.
So I just ended up doing a restore system since a couple of days and I have my USB controller online.
No idea of what was actually wrong with it.
-
I just reinstalled windows and I'm looking for the missing driver for my Pavilion 15, the hardware for the missing driver ID is:
PCI\VEN_8086 & DEV_1E31 & SUBSYS_196F103C & REV_04
PCI\VEN_8086 & DEV_1E31 & SUBSYS_196F103C
PCI\VEN_8086 & DEV_1E31 & CC_0C0330
PCI\VEN_8086 & DEV_1E31 & CC_0C03and it's for (USB) Universal Serial Bus controller, I tried to install the Intel USB 3.0 Host controller driver, but will not install and don't know if it's the correct driver. Would be grateful if someone could lead me to the correct driver.
Thank you.
Hello:
Download, unzip and run the file setup.exe from the link below...
-
Hello, after buying this model and the installation of new copy of win 7 x 64 im Device Manager, I have a yellow exclamation mark on universal serial bus controller driver (when I connect my optical mouse red light is flaashing, but nothing happens, it is the same with all devices on all three usb ports usb) ž
hardware ID
PCI\VEN_8086 & DEV_22B5 & SUBSYS_81F1103C & REV_35
PCI\VEN_8086 & DEV_22B5 & SUBSYS_81F1103C
PCI\VEN_8086 & DEV_22B5 & CC_0C0330
PCI\VEN_8086 & DEV_22B5 & CC_0C03Thanks in advance
Hello:
Download, unzip and run the file setup.exe from the link below...
-
(satellite a60) (USB) Universal Serial Bus controller
Hello, I just formatted my laptop and now when I goto the Device Manager I see an icon missing drivers. I already have a full windows update. Its about "(USB) Universal Serial Bus controller". I tried to find the drivers to support page here to toshiba, but when I tried to install it, it says that it can be installed with SP1 and I have SP2. So my question is, where can get the drivers for it?
Thanks for any help.Hi vivendi.
have you tried to uninstall SP2, to install the drivers and reinstall SP2?
Maybe you are looking for
-
G10 - 133 started booting with a black screen
Hello I was wondering if anyone could shed some light on a problem I have.About 3 months ago my G10 starts with a black screen startup. I can hear the sound and all qosmio logo. Just impossible to see anything. So, I pushed FN + F5 and it would show
-
I have a printer HP Oficejet 4500 Wireless. I had installed twice, by chance, on my laptop Lenovo G500s Touch. I deleted one, but he said that he had to finish a first print job. Now, my printer does not print anything. I tried uninstalling and reins
-
Windows XP Outlook Express 6... the connection to the server has failed.
I have Windows XP. When you attempt to send emails from my Outlook Express 6, I get this message... The connection to the server has failed. Account: 'pop3.live.com '. Server: 'smtp.live.com '. Protocol: SMTP Port: 25, secure (SSL): Yes Socket error:
-
OpenH264 and Primetime and Widevine 'will be installed shortly'...?
I tried to update Firefox and uninstall and reinstall and went in: config to the difficulty, but I continue to receive messages for OpenH264 and primetime and encryption of the Widevine they "will be installed shortly. What should I do?
-
The SX20 language setting cannot be saved after restarting the device.
Hello world Anyone encountered below the question before? I have a SX 20 with the TC7.1.4 software, when I change the default language to another, it will work, but after restarting, the automatic restore of the default language. I have tried the fac