Why ipod classic shows code 10 in Device Manager

Similar Questions

• my ipod classic shows a red circle with a cross ared next and will not respond

  my Ipod classic shows a red circle with a red x inside, and it's making a clicking and whirring sound.
  can you tell me what is the problem?.

  Dead IPod I'm afraid.

  See iPod displays an icon 'X' Red - Apple Support. Despite the date of the last update of this document, I doubt Apple have much interest in the classic iPod service. The line was removed some time ago. See also Re: corrupted iPod classic. You can try to get the stats, but my guess is that it will fail open player.

  TT2

• My v3 wifi adapter - 112 p does not (broadcom) - code 10 in Device Manager

  does not my wifi adapter of v3 - 112 p - code 10 in Device Manager

  said-

  This device cannot start. (Code 10)

  {Operation failed}
  The requested operation failed.

  Can you do a right click on the card in the Device Manager and uninstall the adapter and restart the computer to see if that helps?

  If it doesn't, try to download and install the Win 10 wireless driver http://www.acer.com/ac/en/US/content/drivers.

• IPod Classic (80 GB) "unrecognized USB device" running windows 7

  I've recently upgraded to a new laptop (acer aspire 5738G) running windows 7. I managed to transfer my itunes through library and that you have installed itunes (x 64) that works well. When I plug my ipod classic (80 GB) on a usb port, I get a message saying "unrecognized usb device". I managed to make it work once, but when I did, I got an error understood saying "this drive could run faster" or something in that sense. I tried other usb devices and all seem to work well, so I guess that's the ipod drivers or a compatibility issue with 7 and itunes. I uninstalled and reinstalled itunes, have reinstalled the usb drivers and have browsed the net for a fix but wo's me again! I waited patiently a hotfix from microsoft or apple, but still nothing. It seems that there is a great problem of the spread. Does anyone have any ideas as what was once a small annoying problem turns into a right royal pain in the a$ $. Thanks in advance!

  I also have the same problem is "USB not recognized" and I have the old IPOD classic (20 GB).

  The problem started when I upgraded my home pc to Windows 7 Pro 32-bit of Windows Vista. My iphone 3gs is currently recognized properly but not the ipod 20 GB on the same iTunes 9.0.2. Device Manager reports the 20 GB ipod as "unknown device".

  My computer is a HP Pavilion Slimline s3620f. Almost tried everything:
  -reboot several times
  -Reinstall itunes several times
  -restart the service itunes several times
  -Reconnect the ipod several times
  -tried the front and back of the usb ports
  -deleted the Sentinel file under c:/users //musci/itunes/I've found solution on another forum

  ... still nada, zit, ala!

  Update: I've found a workaround. Fortunately, my ipod classic cable is a cable in there provided with firewire in addition to the usb cable. Since my home pc has firewire port, Windows 7 now recognizes the classic ipod through this port, have a drive letter and itunes works on it as well.

• Equium L40-156: graphics card problem - error code 12 in Device Manager

  People of the night...

  Just got a family run Vista premium, Equium L40-156, everything is going well except a little problem with the display adapter (Mobile Intel 965).

  Tried the drivers that I had with the installer
  Tried the drivers from the toshiba download page
  Tried the drivers on the Microsoft Update site
  Tried the drivers from the website of intel

  All have the same problem, in Device Manager, it shows with an error (the pretty yellow triangle with the "!") with an error code 12 (the device cannot find enough free resources) even after a system resart.

  Switching view hidden devices displays a 2nd same device, but works correctly, but the two disappear if I try to delete either.
  Display settings do not display a connected device, DXDIAG had no idea either.

  Latest version of the BIOS installed, all other devices are very good and can not see an IO overlap anywhere

  Any suggestions, greatly appriciated

  Ta

  Hello

  I have studied a little bit and looked on the Microsoft page for some answers and found out what exactly means the error code 12.

  ------------------------------------
  + Error code 12 +.

  + This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system. (Code 12) +.

  + Two devices are assigned the same i/o ports, the same interrupt, or the same Direct memory access channel (whether through BIOS, the operating system, or a combination of both). This error message may also appear if the BIOS did not allocate enough resources to the device (for example, if a (USB) universal serial bus controller is not an interruption of the BIOS because of a corrupt MPS (Multiprocessor) system table). +
  -------------------------------------

  Well, what to say; usually this error message should not appear with the original Toshiba preinstalled operating system.
  I put t know if you have changed something or add an additional device, but it would be very interesting to know if the same error message appears after the reinstallation of the OS.
  You can use the Toshiba Recovery CD/DVD of restoration!

  All the drivers, the tools are already preinstalled on the recovery CD so the entire procedure will not take very long. about 10 min.

  Check this box and report if the same error is displayed on the laptop with the factory settings!

  Good bye

• Teredo Tunneling Pseudo interface displays the code 10 in Device Manager

  I have a code 10 on it. I went into the Device Manager and it says that my drivers are up to date for this device. I still have the yellow sign on it?

  Hello William,.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the brand and model of your computer?

  This problem can occur when the device driver is missing or damaged.

  Code 10 is displayed for the following reasons.

  -Device Manager cannot start the device.
  -One of the pilots who needs the unit does not start.
  -Device Manager has insufficient information to recognize the error shows this device driver.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Hardware devices do not work or are not detected in Windows
  http://Support2.Microsoft.com/mats/hardware_device_problems

  If this does not help, use method 2.

  Method 2:
  Please use the suggestions in this article and check the issue.
  Reference:
  FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
  https://Support2.Microsoft.com/kb/943104

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Drive DVD-ROM 37 error message Code in the Device Manager on Satellite M30

  Hello

  I'm new to this forum and I wonder if anyone can help? I have a Satellite installed 30-106 M which has the above CD. At present, it does not work when I go to Device Manager, the error massage that I have is that follow 'Windows cannot initialize the device of this hardware driver. (Code 37) ».

  Can someone offer me some advice please.
  Thank you
  Trevor

  Hello

  I studied in the Microsoft Knowledge base, and it seems that this error is displayed because the driver returned error in her routine to the driver entry.
  I think that you need to uninstall the driver, and then click find the hardware changes to reinstall or upgrade the driver.

  You can do it in Device Manager. Otherwise, you can remove the drive in the Device Manager list and after restart of the new mobile operating system should recognize the drive again.
  After this procedure, you should test the device if it will work.

• Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

  I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
  In the device manager says code 10 DEVICE can NOT START.

  Help, please!

  Thank you!

  Hello

  If you read here:

  http://support.Microsoft.com/kb/943104

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
  Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

  Welcome them

• Drive SD-R6112 are more recognized - 19 Code error in Device Manager

  Hello!

  I have two lenses (one internal, one external) who suddenly are not recognized. Both are appearing in Device Manager with the same error as follows:
  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  After uninstalling and re - install them both several times, including resetting devices still not change state.

  Currencies are: DVD-ROM TOSHIBA SD - R6112 (internal)
  TSST corp CD/DVGW SH-S182M peripheral USB (external)

  Both devices worked very well the last time I was on my laptop, 2 days ago.

  I guess I have to delete some registry entries, but without details, I'm not going there!
  Can someone help me?

  Thank you very much
  Photographer for customers waiting for pictures...
  Susan DeFurianni

  To my knowledge a registry problem was detected. This can occur when more than one service is defined for a device, if there is a failure at the opening of the service registry entry, or if the driver name cannot be obtained from the service registry entry.

  As far as I know Microsoft provides these options of solution:

  Click on uninstall and click Scan for hardware changes to load a usable driver.
  Restart the computer using safe mode, and then select last good known Configuration. This cancels the last successful configuration of the registry.

  In addition, you can try to remove the Upperfilters and the LowersFilters of this registry entry:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4 D36E965-E325-11CE-BFC1-08002BE10318}

  If it doesn't help then access Device Manager Reinstalls the channel primary and secondary section ATA/ATAPI IDE controller and reboot.

  Good luck and bye

• No sound on windows. Error code 10 in Device Manager

  Original title: No Sound Device

  My sound stopped working. Audio device is a High Definition Audio CODEC IDT. I tried all the updates (hardware and software). In the process of troubleshouting with Device Manager, I get an error code 10. I'm just trying to get my sound card to work. How can I make it work again?

  Hello

  See the following article to resolve this issue.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Here is an article which related errors Description 10 Code that generates the Device Manager.
  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

• CD/DVD drive not working do not error code 41 in Device Manager

  Original title: code41

  I went to the Manager of devices-uninstalled cd & dvd, rebooted, devices are see the watch but always error code41. When I insert a music cd, the Unit looks like it is will start up, then stop? I also tried the Fix - it on the web site, still does not? Any ideas?

  Hello

  Method 1:

  Try the steps suggested in the given below link and check if this is useful.

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-doesn

  See also:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Note: In the article below try the manual steps for the removal of the filters and check if that helps.

  Method 2:

  This problem may also occur if you install a non-Plug-and-Play device driver, but Windows cannot find the device. Here are some things you can try to solve this problem.

  If the Troubleshooting Wizard does not resolve the problem, do one of the following:

  ·        If the device was removed, uninstall the driver, connect the device, and then clickScan for the hardware changes to reinstall the driver.

  ·        If the material was not removed, the driver files may be obsolete. In this case, update the driver in Device Manager. In the device properties dialog box, click theDriver tab and then click on update driver to start the theHardware Update Wizard. Follow the instructions to update the driver.

  ·        If the device is a non-Plug-and-Play device, you may need to install a newer version of the driver. To install non-Plug-and-Play devices, use Add Hardware Wizard. Click Start, and then clickRun. In the Open box, type hdwwiz.cpl.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• error code 12 in Device Manager with graphics card intel HD.

  I buy a system with the following specifications.

  Win 7 ultimate 32 bit
  with intel motherboard DH61WW

  When I install the drivers for the graphics card, I got error in the management system saying code 12
  "This device cannot find enough free resources that it can use. (Code 12)

  If you want to use this device, you will need to disable one of the other devices on this system. »

  I have the latest version of the driver software

  Thank you Sir,

  I solve the problem by myself...!
  There was a reader of "AMD 3gIO filter" problem is a conflict I do system restore and install the new driver successfully...

• Code 10 in Device Manager when you use the network adapter

  Type: ECS (Microsofot)

  Teredo Tuneline Pseudo-Interface

  Problem: could not start. Code 10

  Please, can I get help on how to fix it?

  Original title: NICs (Teredo Tuneline Code 10)

  It is not necessary to the Teredo Tunneling Pseudo-Interface until you start to need to use IPv6 - which may not be for years.

  Right-click on it in Device Manager and select Disable.

  Or open an elevated command prompt (search > cmd > right click Run as administrator) and type

  netsh int teredo set state disabled

  See http://www.sevenforums.com/network-sharing/46575-teredo-tunneling-issue.html

• Remove multiple monitors. __Laptop with Docking stations shows 6 monitors in Device Manager

  HP Tablet

  HP Docking Station with HP monitor.

  Windows 7 Ultimate

  The Manager of peripherals and devices and printers display 3 laptop screens and 3 monitors of the docking station.

  I deleted the additional monitors in the Deviices and printers and their drivers listed in Device Manager.

  But on reboot Windows 7 shows 6 monitors again!

  If these 'extra' monitor entries don't cause problems, leave them alone.  It's pilots that will always place them when you remove them.

• Error code 43 in Device Manager.

  I have a 43 error that keeps appearing and disappearing.  USB devices worked for a day then stopped working since.  It started sometime in March, and now they are not coming back.  The USB mouse lights up as if it was on and lights up when you move like its supposed to do but it still does not work.  The keyboard does nothing.  I am currently using a ps/2 keyboard.  I have a Windows 8 Inspiron 660 computer with a motherboard Asrock z77 pro4 and a gtx 275 graphics card.  Although my windows is not 'true' so to speak I bought it on its Web site.  I have also 2 monitors connected, one to the motherboard the other to the graphics card.  In Device Manager, the "unknown devices" are sometimes there and sometimes not.  So far, I have tried

  1. Uninstall the usb ports controllers.
  2. Download the latest drivers for my device.
  3. Update the computer several times.
  4. Unplug the unit and plug the usb devices.
  5. Plug my camera on other computers and they worked,
  6. Connect the other devices work in my computer that did not work.
  7. Thanks to the Fixit kit which does not work.

  I was wondering if I pay for support and it does not solve my problem I would get a refund or not.  I have also to documents on when usb devices worked.

  When the Board of Directors and the mouse worked it showed in Device Manager but the "unknown devices" is a not disappear, even if the keyboard and mouse were the only things connected.

  -Also-

  I just noticed that my "Standard Enhanced PCI to USB Host Controller" has an error of 45 and he said: it's not connect.  I don't know what this means, but it may be useful.

  

  

  

  

  

  -----------------------------------------------Other Information----------------------------------------------------

  It is an error 45 and he says its not connected, it seems important.

  

  Hello Roger,.

  Thanks for the reply.

  I'm sorry for the late reply.

  I suggest you try the following steps and check if it helps.

  Remove all USB devices connected to the computer.

  b. press Windows + R keys, type regedit into the run window and press ENTER.

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  (c) in the navigation pane, search for, and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BFC1-08002BE10318}

  d. in the pane of details, right click 'LowerFilters' and then click 'remove '.

  e. click 'Yes' when prompted.

  f. close the registry editor and restart the computer.

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/kb/322756

  I hope this helps.

  Thank you