Unwanted Vongo software installation

Similar Questions

• Problem using Toshiba Software Installer for Win 7 on Satellite L750-1MT

  Hello!
  I have the problem with Toshiba Software Installer for Win 7 on Satellite L750-1MT (PSK30E-02T002B3) with no preinstalled operating system.
  I do the following:

  1. install Windows 7 x 64 SP1.
  2 Installing the LAN driver (device was not recognized by Windows 6) (downloaded from [http://se.computers.toshiba-europe.com/innovation/jsp/supportMyProduct.do?service=SE&LNG=26&userAction=S MP_RESULTS_PAGE & partNumber = PSK30E-02T002B3 & serialNumber = & USER_ACTION = Serial % 20number])
  3. install all updates of Microsoft Windows
  4. run the installer of the software Toshiba for Win 7 - it installs two drivers and then asks to restart.

  Here is the log for the first test (win7update.log) file:

  12\28\2011 update started at 21:11
  TVALZ_O.inf installed
  E/s installed & memory access driver
  driver_bluetooth_TC00241200A.exe/s/log/test has been installed with the result of the PASS code
  util_tvap_TC00215000H.exe/s/log/test /wait15 was installed with the result of the PASS code
  Updated at 21:29

  After the restart I've run it again and the result is:

  12\28\2011 update started at 21:38
  Toshiba Bluetooth stack has already been installed.
  Toshiba value added package has already been installed.
  Updated at 21:40

  Any help is appreciated!
  Thanks in advance!

  Stand by.
  What are you doing exactly?
  You try to install own OS?

• Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted. The anti-virus software installs this file but now my internet does not work.

  netBT.sys replacement files viruses

  Recently, I ran an anti-virus and learned that my netBT.sys file was corrupted.  The anti-virus software installs this file but now my internet does not work.  I guess I have to replace this file, but don't know how.  I see that I need to use my windows XP CD but my CD drive is broken.  How can I go about replacing this file?

  Thanks in advance

  Hi DonMendigo,

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  To run the System File Checker tool, follow these steps:

  a. click Startand type cmd in the box start the search.

  b. right click on cmd in the list programs, and then click run as administrator.

  c. If you are prompted for an administrator password or a confirmation, type your password or click on continue

  d. at the command prompts, the following line and press ENTER:

  sfc/scannow

  See also:

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

   

  File system (CFS) Checker

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/system_file_checker.mspx?mfr=true

   

  Method 2: If you are still unable to connect to the internet, then follow the article in the Microsoft Knowledge Base and check.

  Programs Internet in Windows XP cannot connect to the Internet via a connection to wide band

  http://support.Microsoft.com/kb/307164

   

  I hope this helps.

• Error scanner HP Photosmart 2575 during software installation complete

  Since I use Windows 7 x 64, I've only used the basic problem-free printer driver. Recently, I wanted to analyze a document, so installing the software "full" (AIO_CDB_2570_Full_Win_WW_130_141.exe).

  My printer is connected via ethernet on a home network.

  The software installs until the moment where he tries to connect to the printer/Scanner.

  I have uninstalled several times, also deleted the software using the L3 command file.

  Whenever the HP Digital Imaging Monitor tries to talk to the scanner, it reports the error:

  

  I made a new installation of Windows 7 X 64 ultimate, for a spare HDD, no active firewall, no antivirus installed - same error.

  HP Software Update installed all available patches.

  Always the same.

  Since it does not work on a new installation of Windows, but it will work via USB, it seems that there is a problem in the network connection.

  This HP document: "Scan cannot be performed because another program or computer uses the network device" message on the computer in Windows XP and Windows Vista when Scanning Over the Network has some steps I would like you to try. There is no specific measures of Windows 7, but the Vista section will still work.

  You are welcome to try all the Solutions, how ever I think that the only Solution two, three, five, six & seven steps are necessary.

• I can't use windwo Defender, my pc show if you use another application to find the unwanted malicious software, use action center to cheack app status

  "I can't use winddow Defender, my pc show' If you use another application to find the unwanted malicious software, use action center to cheack app status."
  Please help me solve. Thank you

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• For microsoft office 3,1,5 avery Wizard software installation cannot find Microsoft Word

  Original title: the software installation wizard for microsoft office 3,1,5 avery will install on vista home basic. error comes up cannot find microsoft word. what I'm doing.

  as I mentioned above, I can not install avery Office Assistant 3,1,5 will not install with Vista Home Basic. error comes up cannot find microsoft word. What should I do?

   
  Hello
   
  What Microsoft Office version do you have installed?
  
  You can follow the methods mentioned in the article in order to help solve the problem.
   
  Avery Wizard Setup cannot locate word
  http://support.Microsoft.com/kb/288387
   
  Hope this helps
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Software installation problem

  I have a Windows Vista PC, I don't remember the problems with regarding the purchased software installation.  The last two software products, TurboTax 2009 Deluxe and Photo Explosion Deluxe not installing not.
  I've actually worked with the assistance of TurboTax and was still unable to get the software installed.  Photo Explosion is just sitting there.  When I insert the CD, it does not automatically start, and I have to run it through Run or enter my computer and selecting the Setup program.  I tried to play with the functions of security, thinking they have stop installation but at this stage I am not clear on how best to proceed.
  Any directive or suggested efforts would be appreciated.

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/threads

  They will help you with your question in Forum Vista programs at the above address.

  See you soon.

  Mick Murphy - Microsoft partner

• Software installation CD, recognizes not hard drive not labeled C:\

  My hard drive is called I:\.  The installation cd has not recognized this and will not install the software.  How can I get the installation program to recognize the hard drive?

  In my view, that it is a limitation of the software installer. We have downloadable versions, but to the best of my memory, even they do not give a location prompt.

  Message relates to: None

• Intel Chipset Software Installation Utility, v.9.1.1.1019, A01

  Nobody knows exactly what this update: Intel Chipset Software Installation Utility, v.9.1.1.1019, A01 addresses? What fixed it? I ask his stated as critical.

  Detailed description

  Want to save time? You are not sure if you need this file?

  Run this easy to use Intel® Driver Update Utilityand it will be 'automatically' you tell if you need to update your chipset INF file and if so, will prompt you to install and you're done. This will save you a lot of time not only on your chipset download but the most common files needed for your system.

  Name changes:
  Intel® Chipset Device Software is the new name of the Intel® Chipset Software Installation Utility; We will see this name when you run the installation package.

  About this file/download:
  Intel® Chipset Device Software installs of Windows INF files. An INF file is a text file that provides the operating system of the information on a piece of hardware on the system. In the case of the current Intel Chipset Device Software, this information is primarily the name of the product for the piece of hardware. This allows the operating system to show the correct name for this piece of hardware in Device Manager.

  * Important *.
  Intel Chipset Device Software installs not AGP or USB drivers. DO NOT DOWNLOAD THIS UTILITY IF THE MANUFACTURER OF YOUR DEVICE TO CORRECT A "PILOT AGP," RECOMMENDS "AGP GART" OR "USB DRIVER" ISSUE; IT WILL NOT FIX YOUR PROBLEM.

  Please read the attached files before installing (Readme.txt and ReleaseNotes_9.4.0.1017.htm)

  Key words: 82801, ICH, health child and maternal

• Color LaserJet MFP M477fdn Pro: M477 Software Installation fails at 99%

  Like others who have posted here, I have been unable to get the printer software to complete the installation. The printer is a Color LaserJet Pro MFP M477fdn, 3 months. I'm trying to install the software on a new workstation HP Z240 performing Windows 10 (64-bit). The connection is via USB cable. The printer and the software have been previously used with a Windows 7 machine without problem.

  I tried, repeatedly, to install the software from the disc supplied with the printer and also a 126.6 mb download HP Color LaserJet MFP printer M477 Pro series full software and drivers. The results are the same with a source - installation apparently progresses up to connect it the indicator product of progression from screen reached 99%, how it gives an error message "a Setup operation took too long to run. It is a fatal error, preventing the use of the product. Restart your computer and run this installer again. If the problem persists, please visit the web site of product support for your product. "It takes about 20 minutes for the phase of installation to go from 0 to 99%, and then later hooked up to 99% for 2-5 minutes, the error message is displayed.

  I am able to print to this printer, but at least do not have the ability to scan from the computer there is no indication that the I.R.I.S. OCR software is installed.

  I had care of do not connect USB until you are educated.

  I tried repeating the installation without uninstalling first and get the same result.

  I used the uninstall contained the disk feature, and have deleted the printer to the computer using the Panel between the installation attempts.

  I tried to do a right click to run the installer as administrator and get the same result.

  I tried to install after clean boots with turned off Windows Firewall and all functions of the software Norton Internet Security including its function of firewall turned off.

  The event viewer displays none error entry at all and no entry identifies HP as the source of an event.

  I tried to connect via USB 2.0 and 3.0 ports.

  I cleaned recycle them and temporary folders.

  I have updated the firmware of the printer to the 20160331 version.

  Printed printer configuration report will not display any errors, nor that the printer itself indicates something is wrong and confirms the update of the firmware.

  I deselected the optional software, the devices experience HP and I.R.I.S. OCR, trying to install only the required files two more program scanning HP.

  Thanks for any help solving this.

  I think I understood the question, 10 windows installs its own driver, and the installation program expects the hp driver to install.

  DO this FOR THE HP INSTALLER PROCESS (when the percentage meter goes)

  1. go into the Device Manager and find the printer in the list of devices

  2. right click on the printer and select "Update Driver software"

  3. click on "Browse my computer for driver software".

  4. choose "Let Me pick one...» »

  5. Select the named driver: HP Color LaserJet MFP M477 PCL-6 Pro (make sure it's one with a dash between the pcl and 6!)

  6. click next and back to the installation of hp box and must now see the printer and continue the installation.

  -Alex

• Satellite P100 - problem during a restart after a software installation

  Hello

  I met a problem when I restart after the installation of software. Stay black screen and windows XP does not restart. The first solution is to wait a few minutes and then I can restart normally.

  Could you please give me a reason and a solution to restart paques1861 after installation?

  Thank you very much.

  Hello

  I'm afraid I n t m understand your problem
  What the installation of the software do you mean?

  Did you use a Toshiba restore CD?
  Please explain your problem a bit more

• HP PSC 1315 Officejet series: the officejet HP PSC 1315 software installation disc does not start

  I'm trying to install the software for a HP PSC 1315 all-in-one officejet on an XP pc. When I put the disc in the CD/DVD drive, that it will not start. When I click on SETUP. EXE it does not start. Tried the drive in another laptop (Win10) and office (Win10) and the drive would go. I put the diskettes for installation of two other programs in the XP and two ran. I downloaded the Setup file of the Support of HP and he wouldn't either. Anyone know what is happening here?

  Hi @jonessbl,

  That will be better answered by the @Dellpeople.

  Thank you.

• Photosmart Premium C410: C410 Software Installation fails for not having not supported USB, Win7 Pro

  I just got a laptop HP ProBook G3 450 with Windows 7 Pro 64 bit. I'm unable to install the Photosmart C410 series software and it fails when checking the system requirements, saying the USB hardware and necessary drivers are not present.  I tried with and without a USB cable installed and also tried to disable the security firewall. It fails for the same when USB problem only connected via WiFi. The discoveries of software troubleshooting HP Print and Scan doctor that the software is not fully installed, for example, without help.  I can connect to the printer and print a test page using my WiFi network using a web browser, and I managed to install it on two other portable Win7 in the past.

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• ScanJet software installs in German rather than English - a Windows 7 problem

  I am trying to install HP Scanjet full feature and Driver for Windows 7 (32 bit) for my ScanJet G4010.

  On the software download page I choose English (American) and then downloaded setup_full_G4010_14 - 5.exe.

  My Windows 7 is in English.  EN is shown it is stated in the taskbar.  And to be sure, I went to the United States as my current location.  However setup_full_G4010_14 - 5.exe launched in German.  It offered no language option during installation.  The clean install HP G4010-is in German and offers no language option.

  How can this be?  Well, I'm in Germany.  I don't see how the installer or the installed software could not understand that I am in Germany, but the HP site could.  Has made the website to slip me a German version of setup_full_G4010_14 - 5.exe despite my choice of a version to English?

  A small experiment proved that my system Windows 7, not the site of HP, is the source of trouble.  I ran the downloaded file setup_full_G4010_14 - 5.exe even on a Windows XP system and the installation program launched in English.  The Windows 7 software and then installed on the Windows XP system, in English.

  This shows that the setup_full_G4010_14 - 5.exe is multilingual, and my problem is that it incorrectly detects my Windows 7 as German.  The software installed is not multilingual.  I checked this glancing in an installed help file .xml in the Windows 7 install.  It's in German.

  How can I get setup_full_G4010_14 - 5.exe HP to think that my Windows 7 is in English?

  Hello

  Open the Control Panel, then go to the language and region.

  On the Format tab, make sure that your PC is set to English.

  Then, open the administration tab and verify that the local system is set up in English and not German.

  Now restart your PC, open the HP software and check any change.

  Please let me know if this is useful,

  Shlomi

• Officejet J4680 question 'FATAL ERROR' on XP software installation

  I'm having a problem with the installation of the software for the Officejet J4680. I am running XP, and when it gets to 96% it seems to stall then later a bit shows a fatal error during the Setup error.

  The printer is installed and I can print (wireless) but when I click on the HP Solution Center a note appears saying "no HP devices have been detected. Solution Center HP close now. "Then, of course, the software has not installed correctly. I hope that this is a common problem that can be fixed quite easy.

  Thanks in advance for any help!

  Troubleshooting steps here can help.  There are also several updates and a new driver that was published a few weeks available for download from HP here.