Update changed my user password
I came to my office to find the updates have been installed and it had reset. I went to the user login, he asked my password, I typed, and it would not accept my password. I don't have a disk to reset the password. That's happened?
How can I access my files that are in my log-in?
Here are my updates...
Update security for Windows Vista for x 64-based systems (KB2419640)
Update security for Windows Vista for x 64-based systems (KB2478935)
Update for Microsoft Silverlight (KB2477244)
X 64-January Windows malicious software removal tool (KB890830) 2011
Just reply to * address email is removed from the privacy *.
or call the 317-755-7323
Thank you
REDA
Tags: Windows
Similar Questions
-
change a user password through a database link
Hello
I need to change a user password in plsql for a remote database.
I have a db link Setup, but cannot see how to run the command Alter user so it willl run in the remote database.
I was hoping to do USER@dblink1 ALTER user IDENTIFIED BY newpasssword, but Oracle doesn't like the @dblink in the alter command.
Does anyone know a way around this?
Thank youYou can try something like
declare job binary_integer; begin dbms_job.submit@dblink1(job,'begin execute immediate ''alter user xy identified by ..... ''; end;'); end;
-
Does not required HSS restart after changing AD user password?
It's the ps3...
Hello
You change the AD Service user password? (User ID used to pull all users) If yes then restart them Services, if it is for any particular user or all user, simply select the refresh option now under
Security tab in the section MSAD to refresh quickly or it will take 60 minutes by default to HSS for synchronization with the AD
Hope this helps
Kind regards
Zohra.
-
Information required when changing the user password special appl
Hello
We have a requirement where we need to change the password for the following users.
IBEGUEST
IBE_ADMIN
IRC_EMP_GUEST
IRC_EXT_GUEST
OP_CUST_CARE_ADMIN
OP_SYSADMIN
ASSISTANT
Let me know whether autoconfig/application closing or not while we change the password?
Version:-EBS 11.5.10.2, DB 11.2.0.2
I think that neither autoconfig, nor do I need to stop all the services to change the above user passwords. But please confirm!Vicky1 wrote:
HelloWe have a requirement where we need to change the password for the following users.
IBEGUEST
IBE_ADMIN
IRC_EMP_GUEST
IRC_EXT_GUEST
OP_CUST_CARE_ADMIN
OP_SYSADMIN
ASSISTANTLet me know whether autoconfig/application closing or not while we change the password?
Version:-EBS 11.5.10.2, DB 11.2.0.2
I think that neither autoconfig, nor do I need to stop all the services to change the above user passwords. But please confirm!
It is not necessary. Please note that changing the password for all users of the application (except the GUEST user) does not require running AutoConfig or bouncing the application services.
What is the Impact of a seeded Oracle users disabling? [418767.1 ID]
Is it safe to Date Some Applications end users as a GUEST? [783428.1 ID]
Configuration Guide for Oracle E-Business Suite 11i [ID 189367.1]Thank you
Hussein -
To change the user password problem
Hello
I'm with some problems when you try to change an oracle user password. After using the alter command, it gives the message "Change user", but when I try to connect with, it throws the error ORA-01017...
The strange part is... it works fine on my XE 11 g!
Anyone have an idea on this issue? :)
Thank you.
================
Oracle@Arc02:~ > sqlplus mybase/mypass@myinstance
SQL * more: Release 10.2.0.4.0 - Production on Tue Jan 15 11:52:48 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Release 10.2.0.4.0 - Production 64-bit
With the Real Application Clusters option
SQL > alter user z48829 identified by Telemar $0n;
Modified user.
SQL > quit
Disconnected from the database to Oracle 10 g Release 10.2.0.4.0 - Production 64-bit
With the Real Application Clusters option
Oracle@dtcdbarc02:~ > sqlplus z48829/Telemar$0n@myinstance
SQL * more: Release 10.2.0.4.0 - Production on Tue Jan 15 11:53:14 2013
Copyright (c) 1982, 2007, Oracle. All rights reserved.
ERROR:
ORA-01017: name of user and password invalid. connection refused
Enter the user name:
ERROR:
ORA-01017: name of user and password invalid. connection refusedHello
Use sqlplus z48829/'Telemar$0n'@myinstance
[ora10g@pos-uat-2:/home/ora10g>]sqlplus ajay/Telemar$0n@EBPSUATN SQL*Plus: Release 10.2.0.3.0 - Production on Thu Feb 28 13:29:17 2013 Copyright (c) 1982, 2006, Oracle. All Rights Reserved. ERROR: ORA-01017: invalid username/password; logon denied Enter user-name: ^C [ora10g@pos-uat-2:/home/ora10g>]sqlplus ajay/'Telemar$0n'@EBPSUATN SQL*Plus: Release 10.2.0.3.0 - Production on Thu Feb 28 13:29:22 2013 Copyright (c) 1982, 2006, Oracle. All Rights Reserved. Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production With the Partitioning and Data Mining options 13:29:22 SQL> exit Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
Thank you
Ajay more
http://www.moreajays.com -
No disk to change/retrieve user password recovery
I forgot my user password to enter in Windows 7 Home Premium. I don't have a recovery disk so can not go this route. Any help for Windows 7? I tried to use the 'safe mode' without success. I'm locked... :(
See the How_do_I_Log_on_to_my_Windows_7_based_computer_if_I_forgot_my_password.pdf to www.itknowledge24.com
-
Vista won't let me change my user password
Hello
Vista (Home Premium) won't let me change my password user (Administrator group)
I give the old password (this is the same password as my login information) and 2 times the new password.
When I click the button change password, Vista let me now that this isn't the right password!Strange, I can connect whith this password, but I can't changed more?
Hello
If you want to change the password in Windows Vista, follow these steps:
-Click on Start and go to control panel.
-Click user accounts and family safety.
This link is not available using the classic view of the control panel.
If you use the classic view just do a double-click on the icon user accounts.
-Click the link for user accounts.
-In the area called to make changes to your user account, click on the change your password link.
-In the first text box, enter your current password.
-In the other two text boxes to enter the password you want to use.
-Finally click on the button of past change and to confirm the changes.
-Close the window user accounts.
-Now your Windows Vista logon password has been changedBy the way; you need ADMIN rights to change this.
-
Change user password in Microsoft Account
My new Windows 8 software tells me that I can change my user password by going to "account.live.com/password/reset". Only problem is that I can't.
Can someone put me out of my misery?
[Original title: account.live.com/password/reset]
Hello
https://account.live.com/ResetPassword.aspx
Change your password
http://Windows.Microsoft.com/en-us/Windows-8/change-your-passwordWindows help - a search on "password" (without the quotes).
http://Windows.Microsoft.com/en-us/Windows/search#PRD=Windows-8&q=password
Rob - SpiritX
Added:
Microsoft Account - change password (if these conditions adapts to your situation)
https://account.live.com/ResetPassword.aspxHow to change or reset password of your account in Windows 8 and 8.1 (other aid
in related tutorials)
http://www.eightforums.com/tutorials/12206-Microsoft-account-password-change-reset-Windows-8-a.htmlHow can I change my password?
http://Windows.Microsoft.com/en-us/Windows/change-passwordI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
problem with user password change request
Hi all
I'm about to ask a question that I don't have much info. I'm not experienced with oracle forms or States but one my customer use them, my client decided to change the user password request forms and did. After that, developers are looking for config files and change the passwords in files of that too. is the application works fine but has reports of problems. as I said, there are two ways to run reports, web and run_product. When the URL is used, reports work well, but in forms (fmb) screens when the run_product procedure is used, they received the error "name of username/password invalid.
even if they change the password user return application, there always the same error. should consider what could be the possible error and what are the files? I know, that it is forms 6i application.If your customer base is 11G, this could be a problem with the passwords case-sensitive. Try to set a password with only UPPERCASE letters.
-
Import of security through caused shared services admin user password chang
Hello
I exported the SSP url for shared environment and any services in another environment. This changed the admin password which I imported.
Details:-
I went to share the services of an environment say dev and to-> application-> Foundation-> shared and exported services groups. Has taken its export and imported into the test environment.
Now that he has changed the user password of the target with the source one. However, I remove the internal ID of all the files inside.
Can someone please help? How to recover the password of it? I have no back up of the test environment shared services.
Version 11.1.2.1
Thank you very much in advance!I was hoping you had a strategy in place, it's basically restore the relational database of shared services from a backup, stop the epm services first.
It is even possible to fix your LCM file and set the admin to the way it should be, but I do not know what state the commissioning is to thus could not guarantee it would work.See you soon
John
http://John-Goodwin.blogspot.com/ -
[T410] FDE - user password insufficient to erase disk (master required?)
Hello community,
before all sorry for my bad English skills. I have a problem with my drive hard-encryption:
For about 1.5 years, I encrypted my hard drive with a user-password (FDE). Now, I plan to replace the hard drive and use the external old as a usb device. So I want to erase the entire disc + password. I tried the "Drive erase Utility" Lenovo, but it requires a master-password. I don't know it
With my user password I can modify the BIOS settings, format the drive and reinstall a new operating system, I can even change the user password. But I can't remove the password / encryption.
My question: is it possible to remove the password from the drive (FDE) only with the password? (Even if a password has been set?)
Thank you
Hello, roderwald.
Pages 40 to 42 of your Hardware Maintenance Manual describe the passwords of the BIOS, including the differences between the master password and the user HARD drive.
Further discussion is not allowed by Community rules:
"No post includes instructions or directives intended to subvert security measures, including passwords, locking mechanisms, analysis of fingerprints, etc., or to circumvent security measures. All messages provides descriptions of the location, or direct links to the content associated with these topics. »
I'm sorry, but I have to lock this thread.
-
Is there a safe way to change the admin password?
When I got my custom PC built and began working with her six years ago, I had no understanding of the importance of strong passwords. The password for the administrator account on my PC is very low. I said two completely different things on fixing this. 1. it is completely impossible and any attempt will be completely trash the account Admin 2 - it is possible if you use the correct procedure and follow the instructions carefully. Who is the most reliable assertion?
Hi okieseeker,
It does not hurt to change the password on the computer, unless you change or forget the password.
Change the user password
-
Exchange system user passwords
When the computer is powered, the first user is able to log in with their password. After that, the computer changes the user passwords. the next user must turn off the computer and back upward in order to connect with the password. What happens and how can I stop this? I teach school secondary and this only occurs when you use a Dell Optiplex 755. All the other Dell I don't have this problem.
Hello
It seems a little odd that the user password changes automatically. It could be a practical work of a malicious application or virus.
I suggest you follow the methods described below:
Method 1:
Start the computer in safe mode and check if the problem persists. Please follow the steps mentioned in the link below to start the computer in safe mode:
If the problem does not persist in safe mode, perform the clean boot in order to find the problem causing the element. Check out the below mentioned link to perform the clean boot:
http://support.Microsoft.com/kb/310353
Method 2:
An analysis online computer with Windows Live Onecare.
http://OneCare.live.com/site/en-us/Center/whatsnew.htm
Kind regards
Gaurav Prakash - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think. -
Dear Sir:After having updated the latest Firmware [Dell your 2161DS digital switch, Firmware, Multi OS, Multi language, Multi system, v.3.1.0.0, 1.3 (A03-00)] and restore the default settings. We do this directly through the Remote Console software. Seeing the log in window, the user name is "Admin" and there is no password. We can access in the switch, but "Admin" a/c is missing from the "User" settings category. So we can't change the Admin password.Could you help us to change any password Admin password?Thank youTim.
-
Problem with creating user Notifications / change user password
Hello
I'm having a problem send emails to users when an account is created in the IOM.
I've added a notification to the user and Manager of the user on the task to create a user in the definition of user Xellerate process but emails are not sent.
I know that if I create another task in order to send emails and call it through the answer in the task of creating a user, it will work.
My purpose is to avoid adding tasks for something IOM should be able to OOTB.
I'm also unable to send an email when a password is updated... I did the same thing for the user to create and I know that the task (change user password) is called by looking at newspapers, but emails are not being sent.
Has anyone encountered this kind of problems?
I'm having these problems in the task of user Xellerate process... I've added notifications to other process tasks (mostly tasks for approval) and that they are working correctly.
Thanks in advanceI ran into several question all about change the default behaviors of the user Xellerate object and the process. The Xellerate object and the process have additional built in secuity to prevent users from accedentily their spoil, so when you make changes as you try to do that they do not work. I have a few SRs open on this, because I have a customer who would like to have sent notifications when new users are created by IOM. As a work-around, I drive offshore the purpose of user AD resource notifications because each IOM user automatically gets an ad and Exchange account.
Maybe you are looking for
-
IPad 2 and iPhone 5 s using iOS 8.3 and iPhone5s would like to update
I have an ipad2 with version 8.3, which I intend now, so I do not lose the ability to play my old games. I also have an iPhone 5 s with the same version (8.3) . My question is, if I update my iPhone 5 s for the last iOS 9.3.1 (keeping ipad2 on 8.3) y
-
I want hepl unlock icloud and apple id in IMEI *.
-
d link wireless connection manager I'd see other people names
When I had first of all d-link WiFi on, ws there only son the name, in the box, for my pc June, nowv I marine 3 other people in the area, showing a link
-
When using my Dell PC on battery, it just stops
Hey I have a dell Windows pc 7 and when I use it on battery power, it suddenly stopped is there a software or a hardware problem power cut
-
ACS as Radius Server V4.1
We plan to use our server ACS to act as a Radius server. Our ACS is used on Windows Server 2003 running V4.1 for Ganymede. I would like to know if ACS is to act as a Radius Server, what kind of questions we expect? looking for related information on