LaserJet pro 400 m425dn mfp: mfp laserjet pro 400 m425dn will not connect to the network

Similar Questions

• HP Laserjet P3015dn: P3015dn pilot will not connect to the printer

  Hello. We provide that HE supports for a number of hotels, and for about a month, we had problems with a number of printers P3015 different properties not being not able to print. This is shared through Windows 2008 R2 servers network printers. The problem when the drivers are installed directly on the computer of the user (Windows 7 Pro).

  The printer is connected and accessed via a web browser. When a test page is sent, no data seems to go to the printer. There is no error in the printer event log. After awhile, an error is displayed for the printer in "devices and printers". There is no specific error given.

  The installed driver is universal PCL6 because there is no specific driver for this printer.

  I would like to know if it is a common mistake that has resurfaced recently. For the moment, we have this problem in 4 separate hotels. P3015s most are a few years old but is new and still under warranty.

  Update: installing drivers PS does not solve it either.

  One of my colleagues managed to solve the problem of despair. Seems the printing services for the port has been disabled on printers. 4 printers in 4 different sites. Don't ask me how it could happen, but that's all you need to do...

  ENABLE 9100 IN MAMT. PROTOCOLS

  

• Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas?

  Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas? Im not geek so please be gentle!

  Try restarting mode without failure. To restart in safe mode, restart the computer and press on and hold down the SHIFT key until the Apple icon appears. The computer starts more slowly than usual because the disk utility checks the drive. After getting on the desktop launch the App store and try to connect. Successful or not, once you're done, restart normally to exit safe mode.

• OfficeJet Pro 8600: OfficeJet Pro 8600 is no longer connects to the network

  I serve my 8600 OfficeJet Pro on a local network with a wireless connection to a router. Now the printer will not connect to the router.

  I can ping the printer to the router, then the wireless hardware works. I can print when it is connected with a USB cable, scanning to a USB key, so printing/scanning equipment works.

  WiFi Protected setup does not work. When prompted I press the button on the router for 3 seconds, the printer who sees because I get a 'connection to the network"roundy roundy, but it times out instead to complete the connection.

  The WiFi connection wizard does not work. Analysis of available networks found my network, but when I enter the password, I get a "trying to connect to the Network" roundy-roundy, followed of a message "Wireless invalid password (WPA) has come."

  The printed report assures me that's the wireless works, and that the WPA password that I entered the printer does not match the configuration in the wireless router. It is wrong - it's the same password using my computer and the computer has no problem connecting. I changed the password on the router (and the computer) and tried the new password on the printer, but that does not work either.

  Is there a way to erase the memory of the printer and restore the default settings that can help?

  Temporarily remove the password and all the safety devices on the router. Save the settings. Now try to connect the printer to your SSID not guaranteed without password. Are you successful? If so, go back and add a WPA2-AES encryption with your password and try to log in again. Do not use WPS.

• Intel pro/wireless 2200bg will not connect or is very slow

  I just do a fresh install of xp pro and my intel pro/Wireless 2200bg has no connectivity.  I downloaded new drivers, but nothing works.  I bought an external card of bg and it works perfectly.   I have a thinkpad t43.  All downloads came from levono or intel.  What can I do?

  Hi TimWiegel,

  You can run the Intel® Wireless troubleshooter from this link & check if the problem persists.

  http://www.Intel.com/support/wireless/WLAN/sb/CS-025779.htm

  
  Reference: Why am I not able to connect or stay connected to my Wi - Fi network?

  Hope the helps of information.
  Please post back and we do know.

• HP Color LaserJet CP1525nw: Can't get CP1525nw connected to the network wireless Netgear Nighthawk x 6 R8000

  I have never been able to successfully get the printer installed by wi - fi with any stability, so we always connected via USB and shared. I bought a new router and would like to be able to print to this printer wireless anywhere on my network. I can't out of connected mode and mode wi - fi printer. Your software crashes, crash facilities to half way through. The printer indicates an IP 169.254.xxx.xxx, if the network is aware, but it's I can get. None of the HP tools will run under this operating system, they hang immediately upon launch. It's frustration none! Someone out there was a bit of luck with this printer!

  Dell XPS 8700 16 GB of RAM

  Earn 8.1 (64-bit)

  Comcast TG862G Gateway (POS)

  Router wireless Netgear Nighthawk x 6 R8000

  HP LaserJet CP1525nw color printer range

  Hi @jrmunn ,

  I want to help you get the printer works on the wireless network.

  There are a few different ways to install the printer on the wireless network.

  • Thanks to the support WPS.
  • Through the installation, by connecting the USB port, it will configure the wireless.
  • Once the USB installation is done. You can configure the wireless via an Ethernet connection.

  Cycle power to the router.

  First, we must restore the defaults on the printer.

  Press the OK button on the printer, go to the service, and then select restore default settings.

  Print a printer configuration page to make sure that the IP address and SSID are erased.

  Print a Configuration report.

  Uninstall the printer software.

  WPS configuration method:

  To connect your printer to your wireless router wireless using WPS:
  (your router must support WPS)

  Start the mode of the WPS button on your printer.
  Within 2 minutes, press the WPS button on your router.

  Then run a printer from devices and printers Add Wizard.

  The USB method:

  Perform a clean boot on the computer and disable the Antivirus software and any analysis in real-time in the Antivirus software also. How to perform a clean boot in Windows.

  Then run the installation immediately after connecting the USB cable, follow the steps described in this document to update the drivers so that's not new error. A fatal error during Installation of the software. Then the installation should continue. (you can use this procedure for any type of installation)

  If you are still having problems and you have an Ethernet cable, we can install the printer as a USB connection again and then configure the printer via wireless Ethernet.

  Method of Ethernet:

  Restore the default settings of the printer.

  Connect the printer to the router with an Ethernet cable.
  Wait about 1 minute and the printer must have a valid IP address.
  Print the configuration page to get the IP address of the printer.
  Type the IP address in the address bar of Internet Explorer which should open the printer's built-in web services page.
  Installing wireless over here now.
  Click the networking, wireless on the left, fill in information about the network and apply the settings.
  After the confirmation, then disconnect the Ethernet cable.
  Now you should have a flashing light on the printer in 1 minute wireless about.

  Print a printer configuration page, to get the new IPv4 address.

  Then create a new port with the new IPv4 address.

  In the devices window and printers, click right on the printer and on the left, click on printer properties, select the Ports tab.

  Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.

• SideWinder pro force back will not work with the adapter.

  I recently bought a Nexxtech usb adapter for my Sidewinder force feedback pro joystick, but it does not work. It appears on the page of game controllers, but when I try to calibrate the joystick does not work correctly. For example whenever I press any button, it is said that I am pressing button 4 even if I push the throttle forward, or press any other button,

  Hi Con_30,

  1. what operating system is installed on your computer?
  2. What are the games you have installed on your computer?
  3. on which game you are facing this problem?

  Method 1:

  First of all I would say you are trying to connect the sidewinder force feedback pro joystick directly and search for the issue.

  After having tried with direct connection try with Nexxtech Usb Adapter and check again for the question.

  Method 2:

  Try a different USB jack

  Method 3:

  Try to uninstall all Usb drivers and try to update the drivers and see if the problem still occurs.

  a. open the Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  (b) in Device Manager, look for the device and then double-click the device name.
  c. click on the driver tab, then click on uninstall the driver and follow the instructions.

  Try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  To get the latest drivers, you must contact your manufacturers Web site.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• HP Officejet Pro 8600 Plus does not connect through the Device Manager but will connect bij Win7.

  I have a HP Officejet Pro 8600 Plus that works very well with some computers connected via ethernet.

  On a new computer with Windows 7 Ultimate edition, HP Device Manager can't find the printer, even when I give IP address.

  When I try to add a new printer network in Windows (add printer) windows detects the printer less than a second.

  I need the hp Device Manager configuration so I can use all the options off the officejet.

  Problem solved.

  The printer has a fixed IP address and the customer got his IP by DHCP. By dhcp, dns suffix has been changed so the printer dns suffix and the client does not mach.

  Now the printer receives its IP address by the dhcp server. The dhcp server always gives the same address to the printer.

• 2 13 pro tablet of yoga - to connect to the network, but not the internet

  Hello!

  I got my new yoga today and immediately connect it to wifi...

  It connects to my home but not internet network (or connection very very creepy)

  tried home through my phone LTE and still...

  tried by bluetooth and same result... slow as hell... maybe approx. 10 KB.

  im looking good on the web and don't find anything...

  probobly you are the people with the experience...

  help would be appritiated!

  Kind regards.

  Hey guys quick update!

  After sending the lenovo Tablet and a few screams (sad that we cannot otherwise)

  they replace them with sealed brand new...

  so thanks for the help!

• OfficejetPro8500 WirelessA909g: Officejet Pro 8500 Wireless will not STOP PRINT the PAGES of ALIGNMENT - HELP Please

  I do not see or understand what is my problem. Program will not stop alignment, after I print a page from my laptop or a page of the scanner screen. Does anyone have asolution to this situation. Please advise me how to eliminate program alignment running like a mad man every time I print a copy. Way in advance I thank you...

  Have you done the annular alignment process to stop it?

• OfficeJet Pro 8600 N911a not connect to the network

  Hello. I hope someone can offer a solution to my lack of connection network printers.

  I followed each step that I can find to understand why the printer is not connecting to the network. Including uninstalling/reinstalling, turn off and turn on all systems and following the steps help diagnosis HP.

  According to "the wireless network test results:

  Wireless: 'PASS '.

  Connectivity: Connected "does not work".

  Network: SSID found 'Pass '.

  Printer compatible with Wireless Router Settings 'Pass '.

  No filtering "Fail" (MAC address filtering is disabled - I double checked)

  Channel 'does not work '.

  Security 'Pass '.

  Help would be very appreciated.

  Thank you for your time.

  Hello

  Try following the steps below and check if this can help:

  http://support.HP.com/us-en/document/c02480179

• HP OfficeJet Pro 8610: 8610 does not connect to the password protected network (but connects to the unprotected network)

  I had a HP 8600 that connected to my WiFi at home.  It broke and I replaced it with a HP 8610.  When I try to connect the new printer to my WiFi at home, it is not identifying the printer in the search process.  I have searched the forums and tried to correct the problem and nothing works.

  HOWEVER, I've set up a WiFi comments without password protection and when I am connected to this network, the HP software recognizes the 8610 and I can install it.

  I hope that the foregoing will provide enough information to identify the source of the problem and a solution (easy) (?).

  Thanks in advance for your help.

  -JW

  Hi @JDWUser,

  I'd love to help you with your 8610 replacement printer. I understand that you had the 8600 on your network, but the 8610 will configure not to password protected network. I recommend you to go through this guide How to find the WEP or WPA key or the password of your wireless network, just to check your wireless password.

  Is your password contains special characters that maybe the printer does not? Are adjust you upper and lower case? I know that you explained that your password has not changed and that the printer has been configured successfully on the network before, I'm just trying to isolate a potential cause.

  Restore the default network on the printer then rerun the wireless Assistant might help.

  What is your type of encryption, and who is your supplier of router?  I saw a problem recently with WPA2 secret codes, but this issue seems to be from some routers and firmware updates.

  Please do not forget to keep me informed of the outcome of your efforts in order to contact you, and don't forget to post back with the asnwer the questions I asked. Thanks, I look forward to hear from you.

• HP Officejet Pro 8000 A809 will not connect wo USB port

  I have a WiFi with a SSID wireless but I would like to change to a different SSID.  This requires a USB connection and my wii printer not connect to my computer with the USB cable.  I tried several cables and different USB ports,

  Acctually.  If you know the IP address of the printer, you can enter in a web page and pull the top EWS of the printer (Embeded Web Server).  From the integrated Web server, you can change all settings on the new network printer wireless.  Hope that helps.

• OfficeJet Pro 8625 not connected to the network - no active web services

  Just bought this printer and cannot get the active web services! Keeps telling me printer not connected to the network. Printing and scanning very well. It is connected via USB.

  Hello

  You need to connect the printer to a network in order to enable Web Services, those who will not work with a USB connection, such as those that require an internet connection.

  You can follow the steps below to connect the printer to the network and configuration for the ePrint printer:

  http://support.HP.com/us-en/document/c03721293

  Shlomi

• Satellite Pro L630-167 - Win 7 connection to the very slow connection menu

  Hello

  I have a Satellite Pro L630-167, which is connected to my network works.
  I have this problem where the screen stays just on the Please wait screen, it seems that the laptop is that connects something, but not really do anything.

  However if I had to start the computer in safe mode with network it works fine.

  Any ideas?

  I really need some help here.

  Kind regards

  JT

  Hello

  Have you noticed the problem even if the laptop is not connected to the network and if you want to load your user profile on Windows 7?

  If this isn't the case, then I guess that it has something to do with the network, and in this case, I recommend asking the network administrator for a few suggestions.