UPDATE NETWORK G blackBerry Z30 BLACKBERRY Z30 REDUCED 1 INDEPENDENCE DAY 10.3.1 AND 4.

Similar Questions

• Problem of updating BIOS on Satellite Z30-A-12R

  Hello
  I have a problem when you try to update the BIOS of my A-Z30-12R.
  I currently installed version 2.6 of the bios. My computer had to be reformatted and all programs re-installed. When reinstalling the utility the ECO utility could not be installed due to the incompatibility with the version of the bios that I use.
  When you try to update the bios, the new version is 4.2, but trying to download it and apply it, it says that my computer is not supported.
  Is it possible to update the bios? Why I have a problem with the new version?
  Thanks for your help.

  If you have Win7: install Toshiba Value added Package.
  If you have Win8/10: install the driver of Toshiba system and system settings.

• BlackBerry Bold 9900 not saved the network of Blackberry smartphones

  Hello

  I have Blackberry data services with my provider of Meteor, and that they worked with my previous Blackberry 9900. I had to replace it and bought a second-hand 9900, which was a feature of company on the Vodafone network. I have unlocked it and I am able to use the SIM for calls and connect to the internet via wifi, but I'm unable to activate Blackberry internet services. Host Routing Tables are empty and I can't save. In addition, in the e-mail settings, I get only the ability to create a company account.

  I did a full factory reset and I tried to save the Tables in routing host several times but nothing happens.

  Thank you

  Hello and welcome to the community!

  Start here please... you did some, but not all, these necessary things:

  • Article ID: KB05099 Steps to take before selling or after the purchase of a used BlackBerry smartphone

  In addition, please check this:

  • Article ID: KB30076 How to check for an it on a BlackBerry smartphone policy

  If there is a COMPUTER policy, please will then this:

  • Article ID: KB31291 How to reset a BlackBerry smartphone to factory using BlackBerry Desktop Software Settings

  Finally, after all that, with a strong network carrier (for example, not only WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2, each should result in a message from your BB... Please wait just before moving on to the next step):

  1) register HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network
  • Please wait a 'registration' message reach your Messages application

  2) Remove and return Service books

  • KB05000 Remove the maintenance book for the BlackBerry Internet Service email account in the BlackBerry smartphone
  • If you do not have access CMIME, continue deleting
  • KB02830 Send the directories for the BlackBerry Internet Service
  • Please wait "the Activation' Messages, one per already configured e-mail account, arrive in your Messages. If you have not already configured email accounts, please wait 1 hour.

  3) restart

  • With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes.
  • See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  I hope that will move things again for you! If this isn't the case, then again please contact your mobile provider for formal support. Please ask him to check very carefully as to why your BB cannot receive BIS of their network. There are several possible reasons (e.g., lost or stolen), and you will have to convince them to 'dig deeper' to understand why. Be aware that only they can do this research... nobody here has any access to this research.

  Good luck!

• BlackBerry Smartphones BlackBerry Desktop Software could not validate your update to the BlackBerry device...

  Hello. I had my blackberry for a little over a year. It's a Bold 9650. After I have updated to OS 6, everything was going fine except for the fact that I have lost password Mole and Brick Breaker. Small problems, I know. But when the day consists of a lot of waiting around, believe me, these two helps. in any case, I looked on various forum how to recover them and more expected to open the Fund Manager and go to the list of applications and simply check out these two games and to update. I did that, but when I went to update, I had to wait a while because he loaded [yes I use a mac], and then this message pop up would be "BlackBerry Desktop Software doesn't have to validate your device BlackBerry - abandonment update install due to failure of the validation.» Some packages contained unsatisfactory dependencies. "So now I can't update my phone at all with anything. What can I do to solve this problem without doing a full cleaning [which I don't know how do either, I see a lot of people talking about it]? I just want to be able to update my phone.

  Hey acabungc,

  Welcome to the community of BlackBerry Support Forums.

  This error is caused by a third-party application on the BlackBerry. This application will need to be removed and then you can re-installed games.

  To find out which application is causing the problem go to/Library/Application Support / BlackBerryDesktop / Logs and open the daily log on the Mac.

  And you will find a line in the newspaper that said: abandonment of the install because of unmet dependencies for packages: ((Application name))

  That lists the name of the application.  Then you can remove this application from BlackBerry.  Let me know if you have any other questions.

• Trouble updating my new Blackberry Curve 8520 blackBerry Smartphones

  I received an email the other day by saying that there is a new update for my Blackberry, so I downloaded the software. I started to update my phone and let it go all day, because it seems to take a lot of time. He froze when the phone tried to connect to the computer. I turned off the screen saver and hibernation on my computer before starting the update. The phone is now stuck to the orange screen that says phone world AT@T . I tried to take out the battery and put it back in and it is still stuck at the same screen. I tried to reinstall the new update on my computer and connect it to the phone. The computer does not connect to the blackberry. What should I do now.

  This process will lose all previous data you had on the device.

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:
  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

• BlackBerry Smartphones can receive messages SMS /MMS SMS ICON and get error

  I have a blackberry bold 9000.  I downloaded an update this afternoon via Blackberry App World.  After the update and reboot, I get an eception exception Java lang null pointer exception error and my ICON of Message Tes\xt is missing and unable to receive text messages.

  I removed the battery while the phone is turned on and put it back in... No help

  I went to options and made sure the mailbox was created to separate instead of the handset.

  Any suggestions would be greatly appreciated!

  Hmmm... First of ALL, make another software.  Perform a simple reboot on the BlackBerry this way: with smart BlackBerry poweredphone, remove the battery for about FIVE minutes and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

  If it still fails, you will need to save and reload the operating system.

  See the link below for download and simple installation instructions.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

• Windows Update/network adapter problems?

  I have a Dell Inspiron Duo which is running Windows 8 Pro ('not supported' by Dell for this model). Very well, everything seems to work until about a week before, when I installed an update (I think KB2792100 or KB2797052), and now my laptop cannot find or connect to any wired or wireless networks. The icon on the taskbar displays bars signal grayed out with an 'X' red on them, and when you pass the mouse over it, it says, "not connected - no connection is available. I did a system restore, that uninstalled software more recently installed, as I expect to, but network problems remained. Windows Network Diagnostics has been as useful as ever (he did nothing), and tries to install a driver Windows 7 led to the BSOD and an other-system restore. Can anyone help? I miss the Internet :'(

  Hi Magikarpet,

  It can be upsetting when the network connection fails to run after an update. You can try to install a driver Windows 7 in Compatibility Mode and check if the network is enabled. You can download the Windows 7 drivers from the following link by punching in the serial number:
  http://Dell.to/QjjZDA

  Please follow the steps below to install the drivers in compatibility mode:

  1. right click on the program icon and choose Properties.
  2 when appears in the Properties dialog box, click the Compatibility tab, and then click Run Compatibility convenience store.
  3. in Compatibility Mode section, select run this program in Compatibility Mode for box and select the Windows version of the program you want in the drop-down list.
  4. click on OK and then run the file again.

  Let me know the status.

• Plu work of blackBerry Q5 BB Q 5 No, the battery drained and not coming up again

  My Q5 fear that seemed to be brain dead. The battery was flat, I tried to charge it up but the cord were not good enough, I had other cords still refuses to pick it up. She is eventually evacuated. CAN is more responsible and not to come.

  Likewise, there was no red light.

  What can I do?  All information taken in the trap, I'm just...

  Help please...

  I would like to start with a real BlackBerry charger that works. Plug in the appliance and leave it for two or three hours. See if it boots finally on his own. If this is not the case, press the power for 10 seconds. If the unit starts, let it finish loading. If this is not the case, repeat after an hour or two.

  Leaving the device on link can possibly charge it enough for the boot device, but it could take much longer.

• Overall problems with download/update (network timeout)

  So I experienced a recurring problem on my Windows 7, when I try to download anything, lets say an update to one of my drivers or an update for flash etc (by any browser mozilla/chrome/IE), the download starts very well and the download speed is very good, however the download will slow down and stop at a random time after which I have to pause and resume the Download so that it can continue. This issue is not specific to download a browser that I have experience the same problem when I download an update through a client software (client of game such as the origin or steam) or other clients such as itunes.

  I don't know what is the cause, I already tried the following to resolve the problem:

  -Disable windows firewall

  -tried 3 different software antivirus (avira, avast, windows security essentials)

  -also tried with NO AntiVirus installed/running

  -J' I redirect the ports on my router for any client/game/software

  My network adapter would be the source of the problem? I have an asus motherboard and the driver installed for my network is: Realtek PCIe GBE Family Controller?

  I checked my BIOS and there is nothing suspicious I can say...

  Any advice would be really appreciated.

  Thank you

  specs: Windows 7 64-bit (updated) / i5 - 2500 k 3.3 GHZ / ram 8bg / geforce GTX 590

  Hello, thanks for the post. I wanted to respond and update anyone who can run in this post and the other person who had this problem that I managed to find the problem and fix it.

  The question is not related to material or new specific software that has been installed, and Yes, this problem affects almost all the files downloaded on the computer, regardless of the way his downloading.

  The problem was a severely outdated driver, I discovered that my driver had not been updated since 2010...

  To find this driver network card runs go to your device manager and under "Network adapters" look for your network/ethernet card, as most of my own people was the motherboard built in a list under "Realtek PCIe GBE Family Controller".

  Right-click on it and go to properties, and then click the driver tab and check the Date of the driver.

  This is where I downloaded my driver updated since:

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  Hope this help anyone with a similar problem

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• I get a notification to update when you sign in to firefox. When you try to update you get the message "connection to Server", which can go about 4 hours and never update

  I get a notification to update when you connect to firefox on my mac. When you try to update, I get a message "connect to Server" which can go over 4 hours and never update. It is most annoying. How can I remove that annoying popup which does not in any case all in ensuring that I have updated to the latest version?

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  Thank you.

• I've just updated to Firefox Beta 20. Not happy! The options "View Background Image" and "Image Mode" when you right-click is missing. How can I get that back?

  I've just updated to Firefox Beta 20. Not happy! The options "View Background Image" and "Image Mode" when you right-click is missing. How can I get that back?

  These entries should still be there if you right click on an image or an area with a background image.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  I have 2 imacs and a laptop computer and you want to back up all three wireless via time capsule on my existing wifi network. If we can also use the time capsule as my wifi and replace my uverse wifi, that would be great. possible?

  If you want to make sure that you will be able to get the Apple support in case of problems or questions with your backups, you must use the wireless Time Capsule to back up your Mac.

  As long as the time Capsule provides a wireless signal, you can decide who to your 'main' network, then use it wireless Uverse for "guest", or children. If you do not need the Uverse router/modem wireless at all, it is possible to turn off wireless on the device and make it work only as a support modem/router...with Uverse wired.

  At this point, you can start thinking about how you want to configure things and get back in touch if you need some advice on how to do it.  We need to know what operating system that uses the Mac that you normally use to administer the time Capsule, provide good instructions, if you need it.

• My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

  My iPAD asks me to update to OS 9.3, but the update fails because it says that the iPAD is not connected to the internet and when I connect to my computer iTunes it say my OS is up to date.  Help, please.

  I'm surprised to hear that for an iPad 2 that the issue had apparently been set for 2 s. Please see this for more details as I know them. Maybe the servers at your site have not been updated yet for the new version of the iPad 2.  ???

  Apple released the update iOS 9.3 for older devices (air of iPad and previous iPhone, 5 s and previous) due to problems with Activation. See the following for details and possible solutions.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  https://support.Apple.com/en-us/HT206203

  A new version for the iPad 2 is now available which does not require the activation step. A new version for other devices is not yet available.

• Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  Latest news of Apple posted, incredibly, ELSEWHERE other than on Apple own site Web/community technical forums.

  Apparently Apple has stopped now updates iOS 9.3 for older iDevices due to activation server locking problems more and more.

  http://www.IMore.com/Apple-working-iOS-93-fix-older-iPhone-iPad

  Someone just posted in another thread that it may be active again. I can't check it, because they haven't posted a link about her being active again, and I've already updated all my devices, I can't be sure. Maybe something to watch.