Update of issues for a m9340f of HP with Nvidia GeForce 9500 GS

Similar Questions

• Win 10 update coming not for my XPS 15 9530 with Win 8.1

  I'm doing the upgrade of Windows 10 of 8.1 on XPS 15 9530 and I get the error:

  ! Display: The display is not compatible with Windows 10.  Check with the manufacture of support.

  I have the latest from Dell of the NVIDIA GeForce GT 750 M and the Intel HD 4600 Graphics for windows 8.1.

  Dell XPS 15 is supported to win 10 and by NVIDIA, the GT 750 M adapter is supported.

  By the my Dell support page, there is a message that I can go to Windows 10 (your device is ready for Windows 10).

  How can I win 10 on the laptop?  I had tried before and had the same mistakes.  Counted time.

  zonycat,

  Here are some links that can help you to get this resolved. You can also click on the link below for the upgrade by using the tool of creation of media.

  Compatibility with Windows 10 NVIDIA issues

  Windows Media creation tool

  Free update to Windows 10 and NVIDIA problems

• BlackBerry Smartphones new update S/W for 8900 blocks Desktop manager with Lotus Notes Calendar

  I am using Notes 8.0.2 and using the Desktop Manager to synchronize contacts and calendar.

  After the upgrade of your handheld S/W, released last week, the Desktop Manager synchronization crashes when it tries to read the lotus notes calendar. For this, the address book with no problems, but when it starts to read the calendar notes, it crashes.

  I have used other sync software that accesses the calendar notes just to check my notes calendar was not inaccessible for any reason whatsoever and that worked well.

  If it's a version management issues with Notes 8.0.2 is there a way I can go back to the previous version of the portable software that works well so far? Otherwise, any suggestions to solve this problem?

  I'm done deleted my calendar on the device by following the instructions on this thread http://supportforums.blackberry.com/rim/board/message?board.id=8900&thread.id=403

  After that, my two-way synchronization now works with Lotus Notes Calendar.

• Dual display for Pavilion Elite HPE - 580 t with NVIDIA GeForce GT 420

  recently bought Pavilion 580t for my wife. Updated to NVIDIA GeForce GT 420 map graphics. But there are currently not able to determine if it supports dual display. When you check the Nvidia site, he says that all the stuff here. But this has only a DVI port. It also has an HDMI port. Do I need a spliter any for this?  Or can I use the HDMI port for a monitor (if the new monitors even come with this exit) and DVI for others (currently using the VGA adapter)? 

  I upgraded the stock graphics card when placing your order. I hope that I did a bonehead move and will still need to buy another graphics card.

  
  Thank you.
  

  Hello

  Psallo wrote:

  recently bought Pavilion 580t for my wife. Updated to NVIDIA GeForce GT 420 map graphics. But there are currently not able to determine if it supports dual display. When you check the Nvidia site, he says that all the stuff here. But this has only a DVI port. It also has an HDMI port. Do I need a spliter any for this?  Or can I use the HDMI port for a monitor (if the new monitors even come with this exit) and DVI for others (currently using the VGA adapter)?  Yes. You can do this.

  I upgraded the stock graphics card when placing your order. I hope that I did a bonehead move and will still need to buy another graphics card.

  
  Thank you.
  

  It shows what it looks like on the back of the graphics card?

  

  Best regards
  ERICO

• Problem with NVidia GeForce 650GTX installation/update of drivers

  I bought a VR Deepoon E2 helmet last week. Installed according to the instructions. Home screen don't watch in headset for installation appears to succeed. Tried to use it with the Steam VR DCS World Flight Sim game (which he has been quoted as being able to do), but nothing in the helmet. Disconnected leaves VR on PC and Steam steam. Headset is back to a blue room screen smoky (immersion 3D yet) with a message to reset the headset by pressing the A button on the device to hand.  While software Deepoon software Oculus Rift DK2, he was of course, using the Deepoon E2-based does not come with the hand units as the Rift of Oculus, so I could not use any button.

  Active Web. Uninstalled and reinstalled as recommended (possibly 5 times). Always comes down on a blue color screen with the Message "A switch". Web checked and found Deepoon Assistant Software. This allowed me to spend DK1 DK2 and Deepoon, but any helmet showed was now a big Red Letter D on a gray background.

  Checked the web once again, and he says that the only way was to uninstall a remove all traces of the Oculus and Deepoon from my PC, including my registry. I did it with great care, but think I may have missed and remove some registry keys which makes reference to my NVidia GeForce graphics card 650 GTX which could have are embedded in the Oculus/Deepoon records.  Now given up trying to get this working VR helmet (he had other problems as well as glitch shaped growing on the right lens and not perfectly update) and I'll send the item back for a full refund on EBay.

  Having provided the measures so far, my current status is now worse.  I can't use my graphics card. In Device Manager, it shows an exclamation point, and the games that worked before will not now due to the "lack of DX11 compatible hardware. I tried the update drivers and then downloading the driver from Nvidia for my graphics card, and in both cases, the drivers will not install because there is no recognized the installed card. I tried uninstalling the driver and graphic card and then search for the new hardware in Device Manager. He finds that the GTX 650 but used to always install the driver concerned. I even thought of removing the card graphic, commissioning, remove all references from Nvidia in the registry, close, put my card back in and go upward as if it were to find the map for the first time, but I'm now concerned I will be myself deeper bury.

  If someone could help me please with what I'm doing now, because I'm at a loss and without my games I'm even more depressed. I am running out of ideas and short to the shop that will probably charge me a fortune for a simple registry repair my computer, I don't know what else to do. I have a last file 'dxdiag' that if someone can help I can send it in by e-mail if you need for further investigation. It's my last option.

  Hello

  To get a better idea of your request, please provide us with the following information:

  • The version of the driver installed
  • The version of the driver you want to install
  • Device status (provide a screenshot)

  I'll keep an eye out for your answer

• blue screen nvlddmkm.sys for nVidia GeForce 9500 M on studio dell XPS 1340. recently upgradeed to windows 7, fine for a while but now cela and has many problems: BSOD, freezing, CPU utilization more... I DO __HOW FIX IT?

  Hi, well bad get right to it. I have a dell studio XPS 1340 and have recently upgraded to Windows 7 last week. everything was fine until last Monday. When I switched high performance mode for my battery, my nVidia card also goes to Boost Performance. but this time, I got a blue screen with this:

  nvlddmkm.sys

  PAGE_FAULT_IN_NONPAGED_AREA

  Since then I tried to update the video driver from the dell site and even the nVidiasite. one of them gives me a blue screen as soon as I get to the windows login screen. and the other divides my GeForce 9500 M into its two parts > GF 9400 MG + GF 9200 AMS. When this happens, I can't use the nvidia Control Panel and I can't go to boost performance. I have uninstalled and installed these drivers in safe mode too, but no luck. I system restored before the weekend, when everything was fine, but still the same problem. so now, I have the driver 8.15.11.8633 version

  other side effects I've noticed is that Skype does not work either. When I first upgraded to win 7, Skype has worked well. but now, when I run a video or normal call, my computer completely freezes. In addition, the games I play seem to decrease in performance. I used to be able to play very good Burnout Paradise, but now there is a significant drop in fps. also, the computer seems to use more cpu and heats more quickly. The battery life has decreased too. and when I use windows media center to connect with my xbox360, my phone freezes when I try to access a video.

  I tried the diagnostics start and the only problem was:

  Error code: 0F00:133 media suitible C Msg:No drive is present

  and today, I used the windows debugger and it came with it. im sure this is good information, but I don't know how interperate it. Please help and thanks in advance!

  Microsoft (R) Windows debug 6.11.0001.404 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Windows\Minidump\111409-21434-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol search path is: SRV * c:\debug_symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is:
  The kernel version of Windows 7 7600 SQUARE free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 7600.16385.amd64fre.win7_rtm.090713 - 1255
  Computer name:
  Kernel base = 0xfffff800 '02e0d000 PsLoadedModuleList = 0xfffff800' 0304ae50
  The debugging session: 11:03:52.777 sat 14 Nov 2009 (GMT-5)
  System Uptime: 0 days 1:03:33.572
  Loading the kernel symbols
  ...............................................................
  ................................................................
  .......................................
  Loading user symbols
  Loading unloaded module list
  .......
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck 50, {fffff88007000000, 0, fffff880047d5b1e, 0}

  Cannot load the image \SystemRoot\system32\DRIVERS\nvlddmkm.sys, 0n2 error Win32
  WARNING: Unable to verify timestamp for nvlddmkm.sys
  ERROR: Module load completed but symbols can be loaded for nvlddmkm.sys

  Could not read the name of the problem driver
  Probably caused by: nvlddmkm.sys (nvlddmkm + 135b1e)

  Follow-up: MachineOwner
  ---------

  KD >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  PAGE_FAULT_IN_NONPAGED_AREA (50)
  Invalid system memory was referenced.  This cannot be protected by try-except,
  It must be protected by a probe.  In general, the address is simple bad or it
  pointing to freed memory.
  Arguments:
  Arg1: fffff88007000000, memory referenced.
  Arg2: 0000000000000000, value 0 = read operation, 1 = write operation.
  Arg3: fffff880047d5b1e, if not zero, the address of the instruction that refers to bad memory
  address.
  Arg4: 0000000000000000, (reserved)

  Debugging information:
  ------------------

  Could not read the name of the problem driver

  READ_ADDRESS: fffff88007000000

  FAULTING_IP:
  nvlddmkm + 135b1e
  fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

  MM_INTERNAL_CODE: 0

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT

  BUGCHECK_STR: 0 X 50

  Nom_processus: System

  CURRENT_IRQL: 0

  TRAP_FRAME: fffff88009d7fdf0-(.trap 0xfffff88009d7fdf0)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = fffff88007000000 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = fffffa80057a7270 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff880047d5b1e rsp = fffff88009d7ff88 rbp = 0000000000000000
  R8 = 0000000000000000 r9 = 0000000000000000 r10 = 0000000000000003
  R11 = fffffa80057a7298 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  nvlddmkm + 0x135b1e:
  fffff880 '047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4] ds:5110:fffff880' 07000000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff80002efe1e4 to fffff80002e7ef00

  STACK_TEXT:
  "fffff880 '09d7fc88 fffff800' 02efe1e4: 00000000'00000050 fffff880 ' 07000000 00000000 00000000' fffff880 ' 09d7fdf0: nt! KeBugCheckEx
  fffff880 '09d7fc90 fffff800' 02e7cfee: fffff880 00000000'00000000 00000000'00000000 00000000'00000000 ' 047d60b0: nt! : FNODOBFM: 'chain' + 0 x 42907
  fffff880 '09d7fdf0 fffff880' 047d5b1e: fffff880'04824f5e fffff880'04 c 72260 00000000'00000000 00000000'00000001: nt! KiPageFault + 0x16e
  fffff880 '09d7ff88 fffff880' 04824f5e: fffff880'04 c 72260 00000000'00000000 00000000'00000001 00000000'00000000: nvlddmkm + 0x135b1e
  fffff880'09d7ff90 fffff880'04 c 72260: fffffa80 00000000'00000000 00000000'00000001 00000000'00000000 ' 04ef9000: nvlddmkm + 0x184f5e
  fffff880 '09d7ff98 00000000' 00000000: 00000000'00000001 00000000'00000000 fffffa80 '04ef9000 fffffa80' 057a 7270: nvlddmkm + 0x5d2260

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  nvlddmkm + 135b1e
  fffff880'047d5b1e 8b 0488 mov eax, dword ptr [rax + rcx * 4]

  SYMBOL_STACK_INDEX: 3

  SYMBOL_NAME: nvlddmkm + 135b1e

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: nvlddmkm

  Nom_image: nvlddmkm.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4a4fbef6

  FAILURE_BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

  BUCKET_ID: X64_0x50_nvlddmkm + 135b1e

  Follow-up: MachineOwner

  Hi anchit02,

  Thanks for posting.

  The page fault has a high probability to be RAM or hard drive related.

  You can test the computer memory using the memory diagnostic tool.

  You can start the memory Diag tool by clicking the ORB start and type 'Memory diagnostic tool' in the search box, clicking on the entry that is displayed.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cumulative update to IE9 for Windows Vista (KB292418) fails with the error code 800719E4

  Automatic update of Windows is on and downloaded the updated Cumulative of IE9 for Windows Vista (KB292418). Its installation was also successful until stage 2.

  Upon restarting, the system did not proceed to step 3 and reported that he could not apply. The windows update tries to repeatedly apply this patch has failed, but never succeeds. When the computer reboots, the white screen will appear. I ran the autoatic troubleshooting provided by Microsoft who reported some problems with the registry and settings.  Even after the system is restarted, the problem still persists.  I would like to find a solution to this problem.

  My system is running Windows Vista Home Basic with Service Pack 2 32-bit.

  Moved from Vista to install, upgrade and activate Forum.

  Hello

  Try to download the update and save it to your desktop

  Close all windows/Applications

  Right-click on the file and select run as administrator

  If that fails, run the system update tool

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

• HP Compaq Elite 8300 CMT: updated graphics card for HP Compaq Elite 8300 CMT

  Currently, I have HP Compaq Elite 8300 CMT Business PC with ATI Radeon HD 7450 graphics card. This map, however, does not seem to be compatible with the new CC in Photoshop.

  I want to update the graphics card. Supported for this PC graphics cards like NVIDIA GeForce GT630 (2 GB) FH PCIe x 16, seem to have been replaced by new models. I would like any suggestions to solve this problem.

  KO

  Power to the motherboard and the power are not compatible ATX.

  There are some doalogue / of in-depth discussions on the hacks and mods. Your strictly on the own with this.

  http://h30434.www3.HP.com/T5/desktop-hardware-and-upgrade-questions/HP-Compaq-8000-elite-power-supply-upgarde/TD-p/832709

• Update graphics card for E1705

  Hey, at the moment I have an E1705 with Nvidia GeForce Go 7900 GS with 256 MB. Of course, this card, with a heatpipe, is notorious for overheating and eventually burn the espeically because Dell made horrible bios thermal parameters by making fans turn on too high temperature (like beyond 70 ° C). However, I get the blue screen of parity memory and looks like it's time to replace the card. I was looking for in the Go 7900 GTX and I know which corresponds with the E1705 but I'm just worried about energy consumption and electrical problems. Does anyone know if I could go to the 7900 GTX with no problems?

  
  

• lost the external monitor feature: NVIDIA GeForce GT 330 M video card needs to update the driver in El Capitan?

  Hello
  Apparently Apple no longer supports the NVIDIA GeForce GT 330 M 256 MB and did not update the driver in the operating system to account for its recent update Linux (below)? What is a macbook pro user to do? I know my MBPro is now 5 years - but with an i5 and 8 GB of RAM I think I shouldn't need to take immediately for new?

  Running any video seems to disrupt communication between my Vizio E240AR and MBPro - El Capitan OS (with NVIDIA GeForce GT 330 M 256 MB).  Power cycling the monitor and then force the MBP via a modification of the resolutions seems to temporarily improve the issue - until I have run video or insist on graphics card memory.

  Model name: MacBook Pro

  Model identifier: MacBookPro6, 2

  Processor name: Intel Core i5

  Processor speed: 2.53 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Processor speed of interconnection: 4.8 GT/s

  Boot ROM version: MBP61.0057.B11

  Version of the SCM (System): 1.58f17

• Problem NVIDIA GeForce 820 M installation drivers for Windows 7 64 - bit for HP 15 - r022TX

  I recently bought a HP laptop 15-022TX (with NVIDIA GeForce 820 M card) from Flipkart. I installed Windows 7 Pro 64 - bit of DreamSpark and downloaded the driver for the card from here.
  Now when I run the Setup, it gives the following error:

  

  I walked to the Intel Download Center and use the Intel® driver update utility. But it seems that Internet Explorer crashes whenever I start the utility (tried with Windows 7 Pro 32/64 - bit, Windows 64-bit Pro 8.1).

  Now I wanted to determine my Intel graphics driver so here is the output of 'Right click on the desktop'-> 'Screen Resolution'-> advanced settings.

  

  So, how do I know which driver to download from the Intel Download Center? In "Find by category," I looked in "Graphics"-> "Laptop drivers graphic", but none of the drivers listed seems to help.

  PS - Ironically, I could find help to install the driver for Ubuntu much faster.

  Any help would be appreciated!

  Thank you DerekQ and Paul_Tikkanen for the suggestions. But it seems that I solved my problem. I downloaded SlimDrivers free from download.com and let it scan my laptop. It automatically detected the obsolete VGA driver and downloaded and installed the appropriate Intel HD graphics card driver.

  in any case thank you for your support!

• After Windows Update my NVIDIA GeForce 9800GX2 does not use NVIDIA drivers

  Vista Ultimate x 64 with NVIDIA GeForce 9800GX2 graphics card.

  It worked perfectly until one update windows cannot load the new driver for the graphics card; now, it will work only in VGA mode, and the map is shown as an unknown device in Device Manager.

  I tried to manually load the drivers for the card, but Vista some how block installation.

  How can I get my drivers loaded so I can use the graphics on this card.

  Try drivesweep. 3rd party software to remove the drivers.

  in SafeMode (small-scale)
  (1) uninstalled the drivers first.
  (2) run the driver scan, this will clear the registry of nvidia
  (3) remove the folders from nvidia.
  (4) reinstall the drivers (safe mode)

  http://www.Guru3D.com/category/driversweeper/

• my computer asus k53sd laptop troubleshoot with nvidia issue No. 43

  problem with NVIDIA GeForce 610 M

  Windows has stopped this device because it has reported the problem:(code 43)

  Have recently updated via windows update, recommended updates?

  Reinstall the chipset & graphic drivers from Asus support site

• How to establish which of my Extensions or modules will be disabled until I have actually allow a Firefox update to proceed (for example Tab Utilities Lite still does not not after 10 FF upgraded)?

  While I generally appreciate the frequency of program update from Mozilla for FireFox, I find it frustrating to lose the functionality of the many extensions and additions that I learned to rely on. Unfortunately, there are no easy downgrade option. Is it possible that the upgrade process could identify and report on what the status of post-upgrade of my extensions, etc. would be BEFORE I commit to upgrading?

  Hi hengels,.

  You should take a look in the release notes for Firefox 10:

  http://www.Mozilla.org/en-us/Firefox/10.0/releasenotes/

  You will see one of the new features is to assume that the modules are compatible rather than the reverse. This should reduce the issue you describe a lot of things.

  You can find a more detailed explanation of the functioning of the new system here.

  Hope this helps!

• Update for NVIDIA GeForce 8800 GT error Code: 80070103

  I have in the last three days, tried to download an update for NVIDIA GeForce 8800 GT... every time I get the same

  Error code: 80070103.  What is the solution to this problem.  I really need this update, otherwise I have to replace

  my current graphics card.

  Hello

  Check with Nvidia Support and forums.

  NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
  http://www.nvidia.com/download/index.aspx?lang=en-us

  NVIDIA Support - check with the support that she might be a known issue
  http://www.nvidia.com/page/support.html

  NVIDIA forums - also check for the forums it might be a known issue or others likely to have
  http://forums.nvidia.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">