Update of the system - does never exceed 15%-16%

Similar Questions

• Update of the system - will never spent 15%

  ThinkPad Edge E431; Windows 8.1

  I run Center solution and then system-> software updates. I then start the update of ThinklVantage system 5. It opens and when I start it, it goes for updates to the agent and stops @ 15% full not saying no applicable on the system package, it's whenever I do this. What prevents the update of the system function?

  THX

  I finally fixed it. I've been to download and re - install system update (after 5 attempts at installation). He now works and integrated into the solution Center.

• My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do?  Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  My mini ipad 4 has no battery completely not discharged, called to the charger, but the system does not start. What should do? Already a time connected to the charger, but the system does not start. I have iPad 3 months and never suffered no damage.

  When connected to the charger make a forced reboot: hold the home and sleep buttons, wait for the Apple logo, release the buttons. May take a few tries.

• Switch 10 - Please wait while we install an update of the system

  Hello

  Recently, I brought a switch 10. Whenever I turn on the camera, I see the Acer Logo and he said: "Please wait while we install an update of the system.

  I must have started the device about 40 times now, but it does every time.

  Windows updates are up-to-date and are therefore all updates from Acer.

  Any ideas on how to stop this happening?

  Thank you

  Cory,

  Sorry for the previous post - I just noticed, that last Wednesday, you published an update of the BIOS (1,16).

  Guys, I'm happy to admit that this update has fixed the problem for me. Although I had hurt a bit (I had to restart Windows in order to restart the upgrade process) and after you apply the fix on the first start, that I was also able to see the spam message, at the next start-up went well.

  Thank you for the support, now my switch behaves as expected.

  See you soon!

  Hubert

• I installed Kaspersky Anti-Virus 2011. But the system does not recognize.

  Kaspersky Anti-Virus 2011, I installed on my vista system and everything was fine, but now all sadden the system does not recognize it. could you please help me with this?

  Hi gigikhanoom,

  1. you receive messages or error codes?

  2. you remember to make changes to the computer before this problem?

  Windows doesn't detect all antivirus programs, and some antivirus programs report their status to Windows.

  If you receive notifications related to security on your virus protection software, but you know that your antivirus software is installed and updated, you can follow the steps below to stop receiving these notifications.

  Note: You should only do this if you are sure you have a complete and up-to-date antivirus program installed on your computer and that real-time scanning, which checks every file before it opened or used, is turned on.

  For more information, consult the following link:

  Use antivirus software that Windows doesn't find

  If you're still having problems, then you can try to uninstall and reinstall Kaspersky and check.

  You can visit the links below to uninstall and reinstall Kaspersky:

  Uninstall or change a program

  Standard installation of Kaspersky Anti-Virus 2011

  Hope this information is useful.

• Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  My system worked properly on 25 April and then something happened and now the machine comes back with "Start menu options" but will not start in one of the listed options, modes result in the same outcome.  System also starts on the Vista CD.

  System begins to boot normally, shows the tracer Green Windows at the bottom of the screen, then the mouse pointer appears and moves but the rest of the screen remains black.

  That's it, that's all what he will do.  I checked the settings of the computer and ran the diagnostic tests available and everything seems to go fine and passes all the tests.

  I worked on my own computers for over 20 years and never been stumped before, but I must say this is a first, and I have no idea what to try to do it now.

  Help or direction is appreciated.

  original title: Vista 64-bit Black Screen of Death, with just a mobile available slider, the system does not start in safe mode.

  See if there is a way to tecover clean your data before doing a restore to conditions of factory that will wipe the drive of all.  You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (which you will need to do on another computer).  Starting on this disc and lla should give you enough access to the system (if you do not have any other means) to backup your important data.

  So since you seem to have no other alernatives, you can try retoring the original factory computer options. However, if it is a hardware problem as could very well be the case, you can still encounter problems after even this drastic step.  Then you will need to consider in a reputable computer repair shop (NOT Geek Squad or or a any of these big store centers) or maybe even go back to the manufacturer for repair.   Check out several options and compare the costs, quality and guaranteed and then make your best decision.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After you insert the disc in the drive, the system does not recognize f

  * Original title: Windows Media Player Windows 7 problem

  After having inserted the disc in the drive, the system does not recognize f indicating that a disk has been inserted.  Rattling coming from player. HP Pavilion Notebook g series

  (Moved to music, photos and video)

  Hello

  Welcome to the Microsoft community.

  According to the request, I understand that your system is unable to recognize the F: drive after inserting a disc. I appreciate your efforts to solve this problem.

  The issue could be due to one of the following reasons - the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Given the clicking of the drive I suggest you to clean the optics on the drive by wiping with a barely damp q-tip.

  If there is a possibility of cables in bulk. I suggest to remove the power supply, then make sure that the cables at both ends. Remove and replace firmly. For laptops, you can often clean power and contacts data with a pencil eraser.

  1. Open the Control Panel.
  2. Click on Device Manager and select CD/DVD.
  3. Double click on the drivers tab.
  4. Click update drivers and right click on the Uninstalldisk.
  5. Reboot- it will refresh the default driver stack.

  See the following Article in the Microsoft helps solve problems with CD or DVD drives.

  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems

  See the Microsoft support Article for CD or DVD drive not recognized by Windows or other programs.

  https://support.Microsoft.com/en-us/KB/314060

  Try these steps and let us know the results for assistance.

  Thank you

• Installation update for creative cloud can never exceed 2%, which means that I cannot have access to Premiere Pro. Can anyone help with this?

  Installation update for creative cloud can never exceed 2%, which means that I cannot have access to Premiere Pro. Can anyone help with this? I need urgent access to Premiere Pro, so I can return videos to my clients.

  Check your (win) Task Manager or activity (mac) for a suspended adobe monitor helps the process that you can complete.

• My update of the software does not work

  My update of the software does not work and I can't return to the main he keeps on telling me to restart the computer and then go through the software update settings, then it ends by does not and then it tells me to restart and restart and restart again and again

  What updates you trying to install?

• Windows Update blocks the system off, it

  I shut down the system, while it has been updated of the system (Microsoft Update). Now it crashes, saying that this update no. 11 of 13 is busy

  What should I do?

  The operating system is windows 8.1

  The system should be able to launch an auto repair.

  First you must do a full stop down to Win 8.1 as described in this document:
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  After that, you must restart the laptop... Usually the system would start an auto repair procedure that should solve the problem of update.

• Can I download and install some updates of the system?

  Here, it shows updates of the system are old and it shows the old version I have and it also shows the new version, so must I download the new version and download & install over versions old or not?

  * Pilot your worm last worm *.

  * USB-enhet (sammansatt) 6.1.7600.16385 NEW VERSION > 6.4.64.326 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2936 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - UPGRADE 2937 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2938 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2934 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2935 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB Universal Host Controller - NEW VERSION 2939 6.1.7600.16385 > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB2 Enhanced Host Controller - 293 a 6.1.7600.16385 NEW VERSION > 8.3.1.1011 *.

  * Intel(r) ICH9 Family USB2 Enhanced Host Controller - 6.1.7600.16385 NEW VERSION > 8.3.1.1011 293C *.

  Where it is shown? What application will notify you of new updates?

• Error: The system does not license for the OS image. The system cannot find the path specified

  Hello

  I copied the image of Windows Embedded 7 T510 using HP thin client capture on a USB port. Now, I'm trying to load this image in an another thin client Embedded Win 7 T510 via a USB port.

  However, when the customer starts using this image of the USB, I get error below.

  "Error: the system does not license for the OS image! The system does not have the specified path.

  What solutions do you recommend.

  Thanks in advance

  Solution:

  I tried to install it on a Linux Thin client... Is there had this error.

• I can not burn CD when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive.

  Original title: I can not burn CD

  I can down load soft ware, playing CDs; s & DVD, but when I try to burn a file to a CD, the system does not recognize that I have a CD in D drive. How to fix this?

  Hello

  1. have you tried using different CD and check?
  2. were you able to burn CDs without any problem earlier?
  3. have you made changes on the computer before this problem?

  The hotfix in the following article might help you.
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems/

• MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  I when even run some dos applications, which allows to work ok under XP mode full-screen, but when you use Vista or Windows 7. I can only rum these applications in a window.
  The error message is

  MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  Please is anyway I could run in fullscreen... I don't want to use a virtual machine.

  Any advice would be greatly appreciated

  Of Ernest24

  http://www.dosbox.com/

  You might be interested in reading about DosBox.

  See you soon. Mick Murphy - Microsoft partner

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.