Color LaserJet Pro 400 M451dn: appearing on printed documents HP LJ 400 points
Print jobs are coming up with points (see image)
I have already followed the steps in the Resolution of the problems of print quality
I printed quality and cleaning of the pages, but after all these steps, I will always have this problem.
I've also read several forum posts, but I feel that I did not fall on a good solution for this problem.
Hard to tell from the image, but if all points are black, then the question will be the black toner cartridge. If it is another question, then you'd have points in all colors.
Tags: HP Printers
Similar Questions
-
Unable to connect to the HP ePRINT with Color LaserJet Pro 400 M475dw MFP website
LaserJet Pro 400 color multifunction m475dw-Just installed. Print, scan, copy and fax all works fine! use of WiFi
Using IMAC OS 10.8.2 with all updates
Netgear DGN2200v3 router using
Printer not connect to the HP ePrint website
Printer connects using Hp and profile
for fax set up etc. But the "HP Web Services" article when enrecorded and hit the Activate button - it does not connect to the site - it seems just to refresh."If I try to connect thro the printer not the imac and try to activate the web services, it says" connection "on the screen BUT after a few minutes of trying - so says" CONNECTION ERROR - the printer is unable to connect to the service. Check the internet connection
ANY IDEAS - HAVE I MISSED SOMETHING?
Thank you very much
I try to pull up the built-in web server (EWS) by entering the IP address of the printer in a browser and set a static IP & DNS address.
The information for the default gateway, subnet mask and IP address can be accessed from the Setup menu on the front panel, go to settings > reports > network summary and it will print off the coast.
Once you entered the IP address in a browser and have the EWS pulled up, go to the tab above titled "Networking". Then click on IPv4 in the left column; who will bring to the top of the address configuration page. Place the manual radio button and fill in the IP address, the default gateway and the subnet mask with the information from the report. You don't fill the part entitled WINS server, which can be left alone.
You will then want to fill in the DNS of the page part, the favorite should be set to 8.8.8.8 and the alternative/secondary must be set to 8.8.4.4. Then click 'apply '.
Power cycle the printer. Turn off the power, wait 30 seconds and then turn it back on. Once it is fully operational, try again to connect to web services.
-
On the Color LaserJet Pro CM 1410 Series HP printer paper jam
I can't find/see the paper jam on the color HP LaserJet Pro CM 1410 Series printer. I checked the domains listed in the manual, but there is no sign of my envelope paper jam. Y at - it info on how to do to remove the outside cover to try to find the jam?
The documentation provided by HP for a paper jam in the CM1410 series, I chose the CM1415fnw in this list of series as my example, can be found here. HP does not have a document that has a complete failure of the product.
I hope this helps.
-
Color LaserJet Pro 400 M451dn: Print vs wireless network
I used my printer Wireless Ethernet connection between printer and Apple airport base station. I am moving and can use printer wireless without direct connection to the router? (Printer & new router in place will be not near each other for the direct cable connection is not convenient). Thank you!
Hello @Cary2
No way, it's a D M451dn stands for double-sided N to the network (wired network), only the M451dw will have the possibility of having the wireless
The printer must have a wired network to the internet permanently connection
-
This seems to be a problem with the printer driver, so uninstall and reinstall should be attempted. You can use the latest version of the complete software available for download on the following HP web link:
http://h20565.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5076462&swLangOid=8&swEnvOid=4192
Other possibilities are related to problems due to the unsuccessful upgrade OS or related aspects should also be checked
-
HP COLOR LASERJET PRO M252DW: HP COLOR LASERJET PRO M252DW never able to print without problem
M252DW running on WiFi with three computers Win10. Regardless of the computer that I use, the printer doesn't print. Message to print screen says not 'online' when it is by the LCD. Can I reset or power cycle, no help. The only thing that seems to help is going to the printer and print a test page. This step seems to help sometimes, and I get a test page and can't seem to print for a period of time. It is happening since new (July 1015) and I'm about to returned. FYI, I have no problem to print wireless an inkjet Canon, sitting next to the ch, from any computer.
Any suggestions other than buying a laser gun?
Thank you
Mark
Hi @Henk57, -
LaserJet Pro 400 color m451dw: printer Laserjet Pro 400 color m451dw for window 10 drivers
I can't find the drivers for a m451dw Color Laserjet Pro 400 running on Windows 10. The only available operating systems are Mac. Is there another place to look for drivers window other than the drivers regualer section 10?
10 64-bit Windows
10 32-bit Windows
------------------------------------------------------------------
Say 'Thank you' by clicking the Bravo (Thumbs up) button in the post helped you.
Please indicate the position that solved your problem as "acceptable Solution". -
laserJet Pro 400 color: printer
Hello Mr President
I want a help on your part I have a Color LaserJet Pro 400 m475dw MFP
and when I turned it on. I show masseage like this {10.1002 electric memory error}
How can I solve this problem, Mr PresidentHello Sir,
The error that you expose is a problem with one of the toners.
The magenta to be precise.
In this case, the recommended action is to replace the magenta toner with an original RESUME.
Kind regards -
LaserJet pro 400 drivers for Windows 2000
I have a m451dn color laserjet pro 400 I have purchassed.
One of the systems in my network is a windows 2000 system that is loaded and set up with many programming tools and so on.
I don't want to break this fine computer running system.
I don't want to have to reload everything in a new system.
Simply because it is old, it seems that HP has decided to does not provide not printer drivers for it.
I connected to the printer on the network, the IP address and tried some older printer drivers.
The printer works fine if I don't have a color.
It would be nice to be able to print in color.
Is there a color driver that is compatible with this printer and Windows 2000?
Now that I have fought through, I have a way to make it work
Select another driver from HP - HP Color Laser Jet 4500 worked for me color
go to the printing preferences - paper quality - check the color
go to priferences print, cocument - advanced - options - select color
go to color management - you may need to add a color here profile
I don't know how this is required, but it works now
I had to fix on the printer through the actual IP address
-
HP LaserJet Pro 400 color M451dn
Hello..
I just want to know if I'll be able to print using color HP LaserJet Pro 400 M451dn, even if a toner is empty.
Need to answer you as soon as possible... IM planning to buy one. Thank you
If one of the (black) toner cartrdige is complete, then printer stops printing.
You can continue to print with black, if one of the color cartridge is very low.
Please check the following link for configuring power settings to use & their meaning (System-online power settings Setup Menu) HP:
-
LaserJet Pro 400 M451dn: Problems copying documents from the printer scanner
I use a Mark II of Canon Canoscan 9000F scanner to scan documents and copy them into the HP LaserJet Pro 400 451dn color laser printer. I use the 'Copy' button on the front of the scanner function. When a color or photo document is scanned this way the red and blue colors are reversed when it comes to the printer off.
Both the scanner and the printer work perfectly in all other situations.
Somehow the red and blue colors are to be swapped when a document goes to the scanner to the printer.
I called the Support Canon technique and they told me that they have never heard of this problem and have never had it reported before. When you use the "Copy" button function there is no setting that can be done. The scanner copy what he sees.
So why the red and blue are exchanged on the printer?
Teknishun
What happens if you scan the document itself to the computer and then print the scanned copy? If it is ok, then the question must be the scanner software which sends the document to the printer and has nothing to do with the printer. Sorry, but it's a hot issue.
-
Help! My M475dn MFP HP LaserJet Pro 400 color printer will NOT print!
HP LaserJet Pro 400 color MFP-M475dn-CE863A
Printer on a network and can connect to multiple computers that include: Mac OS X, Windows 7 and Windows XP.
When I try to print from my iMac, the print queue of the printer says "the printer is not connected. When we try to print from Windows computers, it is in the right queue and does not print. When I go the printer itself and try to print a page of demonstration or page supplies directly to him, it says on the screen which is printed, but nothing happens. This is not hum or anything! The port where the network cable is connected is switched on green that says HP which means that the network cable is connected. We've had this printer for a year now, and something like that never happened.
I did not have any software or anything like that until this happened. It was working fine on Saturday when we used it, but when we arrived at work today, he just decided that it would interrupt printing!
I'm puzzled! I tried 'ping' IP address of the printer from my iMac and it pings fine. Does anyone have advice?
(I tried to make of the obvious like too switch the printer on and off and shutting the computer down and nothing!)
Okay, so I feel a bit stupid right now. I decided that I would be closed the printer for about an hour to see if it was there, and what you know-it has been! I had to turn it off several times before but I guess it wasn't long enough. What a pain!
Thanks to everyone who took the time to read this! Sorry to waste time everyone!
-
MFP HP LaserJet Pro 400 M425dn will not print the text to format 72 points or more
My workplace has recently bought a M425dn of MFP HP LaserJet Pro 400 all-in-one printer. It works perfectly except for the fact that it will not print text that is 72 points or larger in size. I tried many fonts that are installed with Windows, and all them print correctly to the point size 71.5 or smaller; Another thing simply does not appear in prints. Content which is of size to 72 points or more * fact * affect the flow of the content printed on the page, however. It's like the 72 points or larger text takes up space, but it is completely invisible on the printed page.
I tested using Microsoft Word 2002 on three separate computers, of which two have installed Windows 7 and Windows Vista installed. The problem is the same on all three computers. The printer is connected via an ethernet cable to our wired network. I have installed the printer software included, and I don't think that there are updates for it that have not been installed up to this point.
Any thoughts on how to solve this problem?
Hello, I just made an account to solve this problem for you guys because it has been a puzzle to me also...
I apologize before the huge hand for the terrible grammar and punctuation that I'm in a hurry
Now it does not work for everyone but I fixed it on my machine with the following
now before you print it... .use (ctrl + p) in your text editor to open the print window, click (properties), and then navigate to the tab (Advanced) now, I have a section called the characteristics of the printer in this category there is an option to 'send truetype as bitmap' activate this and see if it can help someone of you, for me, with this PERMIT I can print any font size my processor will allow me to type
in my machine's plug
Reference Dell d6420
Win7
Msoft word 2007
printer itself is
HP laserjet 200 color m276
printer driver is
HP LaserJet 200 color MFP M276 PCL 6
I understand that this printer and driver is not identical to yours in itself, but the nature of these drivers makes it highly likely that this solution works for most of you
If this can help, someone else did post more because I'll probly do not sign in to this site I created this account just for this post and I hope to solve this annoying problem issue for many of you... .no necessary congratulations
-
Color LaserJet Pro CM1415fn MFP - professional printer with just a feeder?
I'm confused. He is a professional office color printer - which means that a number of print media will be used to print on a daily basis.
And after buying this printer at Amazon, I discovered that there not a manual feed tray and one paper tray.
I have print of legal documents - copy desk in our records, on cheap paper, a paper of good quality to the client and an envelope.
So I have to print a simple letter to remove and replace the Board THREE TIMES. This is not good.
My simple Canon printer internal, or any other printer I've seen ALL have manual power option.
QUESTION: could you please let me know if there is an attachment to this printer that would allow me to print manually, or should I send the printer to the shop?
Hi GarryStotel,
No, this printer does not have an add on the extra add envelope feeder on the plates as accessories. Looks like you need a little higher level printer as one of the following units (color HP LaserJet Pro 300 M375nw MFP color HP LaserJet Pro 400 M451dn printer) I included a link to your review these printers below.
LaserJet CM1415fn:
Overview
- Print, copy, scan - in color - and fax, with the first HP LaserJet printing from the Web and mobile devices. To connect to a wired or wireless network. [4] using a screen color touchscreen to print sharp documents. Save energy and reduce your impact.
Ideal for the
- Companies that are looking for Wi - Fi and networking in a color multifunction capable of printing from the Web via a touch screen and applications and mobile devices.
Features
Put easy, touch screen, print on your desktop.
- Use business apps and the 3.5-inch (8,89 cm) color touch to access and print the information on the Web. [7]
- Stay productive on the move. With HP ePrint, now you can print from virtually anywhere. [6]
- Now with AirPrint™. Simply print wireless from your iPad®, iPhone®, iPod Touch®. [9]
- Spend more time on the business and less time on the program of installation and maintenance.
- Easily copy on both sides of an ID card to a front document.
-
LaserJet Pro 400 M451dn: Toner HP Laserjet Pro 400 does not fit
Probably I'm missing a small detail, but after extensive research and contemplate, I decided to ask here.
I have a LaserJet Pro 400 M451dn, who came into my office with no toner cartridge at all. We ordered the appropriate cartridges, 305 a (checked on the box of the printer and here on the website of HP), three more black color.
I opened only the yellow and blue, but not appropriate. In the left and right corners close, there is a piece in the tray of the printer which does not allow to slip into the cartridges. Everything seems correct with regard to the location of the electrical contacts, tabs, etc., but no amount of stirring or twist will allow cartridges to fit in the status bar to which they belong.
I feel a bit stupid if it's something incredibly simple that I'm missing, but I want to know rather than continue to try my own solutions that do not work.
Any suggestions?
I don't know there is a way to get it free. I never looked at the model number on the front of the printer, but I have now. It came on the Pro 400 area (where it fit well), then glanced at, very quick inspection, like the one on the box. I worked on the wrong model of printer. It's actually a CP2025 which, of course, uses different toner.
I'm sorry to bother you. You probably had something valuable to contribute to the world during the past days dedicated to thinking about my mistake.
Maybe you are looking for
-
DzieńdobryMAM pytanie co mojego laptopa specyfikacji w my napisane, że wspiera dyski SSD SED SSD 240 GB, 256 GB and HARD 7200 RPM disk do 750Go. Czy ten portable obsłużyłby disk HDD 1 TB, SSD 256Go (bez SED) oraz SSD 512 GB (bez SED)?
-
I have a 7 GB of HDD in XP, there very few applications and no photo or music, but after cleaning everything I could think of, still 10% free space. Help, please. I deleted all the old temporary files, all the old restore points, all files update of
-
My computer is threatened by this type of scam?
I wish I had read this earlier. I was just hit with one of these calls. I am the perfect target because I know very little about the computer. What I did and regret it now, is that I let them teach me to a website call www.ammyy.com and from there, t
-
Alpha: Controller of steam / new CPU?
Hello the steam regulator to replace the obsolete Xbox controller in the next generation of the Alphas? When you finally upgrade the processors to the 5th generation? No release date?
-
Help! Low grade of 64 bit Vista to XP Pro x 64 Edition
I need to down ranking due to driver problems for this material that I bought and it does not currently work on Vista 64 bit. Can someone give me step by step the easiest way to get there? I am not competent in this area then please keep it as ABC