Updates Windows stops to open correctly in trying to use the viewer Microsoft powerpoint instead of my regular schedule of programs powerpoint powerpoint 2007.
Updates Windows stops to open correctly in trying to use powerpoint viewer instead of my regular powerpoint 2007 programThis happens every time Windows updates powerpoint programs. If I remove updates Powerpoint 2007 opens correctly without Viewer trying to fit. But then when my computer updates again it starts all over.
You may need to associate the PPT file correctly with the PowerPoint program.
I do not know what operating system so you have and I'll give you the steps for Windows Vista.
1. click on start / Control Panel
2. click on programs
3. open default programs
4. open "associate any type of file or Protocol with a program.
5. search in the list, PPT and PPTX and make sure that they are associated with Powerpoint and not Powerpoint Viewer.
I hope this helps.
If you find my answer was what you're looking for, remember to click on the box "mark as answer" below!
Tags: Windows
Similar Questions
-
had two versions of the program, uninstalled oldest, tried to use the one installed but had windows message reconfiguration. nothing seems to be the case so I cancelled the operation. Now, I can not reinstall or uninstall for the program is open. Help!
Looks like you may have a virus or other malware. Get your updated antivirus program and boot into Safe Mode. Note that some viruses can hide from your normal antivirus program, so you really need to scan in Safe Mode. To enter in Safe Mode when you turn on first, press F8 on every seconds until you get the menu, and then select Safe Mode. Then run a complete system scan.
Microsoft has suggestions and offerings to
http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus
Moderator Forum Keith has a few suggestions along this line to
I hope this helps. Good luck.
-
Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem
My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.
Please suggest
Hi Mohammed Arif a. R,.
You can try to plug the printer again and check the updates of Windows and see if the drivers are install.
Install Windows updates in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates
You can also view the following HP Web site and try redownloading drivers and check.
Also check out the following link and try the suggested steps.
Network printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
Note: This article also applies to Windows 7.
Hope this information is useful.
-
I used my recovery discs and some sort of error came. so, it has not fixed the computer. so I think that some how drivers were not loaded. However what seems to be a driver came when I press my f12 button to use the system recovery options menu. but I insisted on using it, and another box came to tell the software installation media or something to use to load the drivers. I also tried to use the Startup Repair tool restore and system by surprise that I have on an external drive listed under windows backup care but nothing has worked. I don't know anything else to do.
- Open the 'computer '.
- Right-click on the drive in question
- Select the tab "Tools".
- In the error-checking box, click
.
Well you can suffer the consequences of not running it who are often worse. CHKDSK found and try to
repair disk problems, it does not really create them.Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html -
I have windows 7 ultimate works correctly. I want to install windows 7 arc gamer edition. I m using the new copy to install from dvd, he is well until the installation of the updates but the installation finished, it displays error windows could not update the configuration to start the computer. not installing and it rolls supports everything. Please help me solve this problem
original title: windows 7 gamer editionDownload of software on these sites can be very risky, because the origin of the files are usually edited and its quite possible that they could have injected malicious code in it.
Windows 7 Gamer edition is not a developed Microsoft or affiliated with the product, what appears to be a customized image of Windows 7 that authors customized to remove or add Windows components, which can also be very problematic.
You use something that no one can help you consider he has probably been reverse engineered and probably injected by a malicious code like spyware (keyloggers, rootkits, worms, viruses). I suggest you stick to Windows 7 Ultimate, this is the most complete edition of Windows 7, anyone can have.
Resources:
The Dangers of the purchase or use of software pirates - Notebooks.com -
Update Windows 10 removed my printer software. I downloaded the drivers, but my PC won't will not install because the security certificate for the HP software says windows Defender is not closed or not properly closed. What should I do?
Hi @Mixawixa
Spoiler (Highlight to read)What browser do you use? Edge?
Can you try IE or Chrome and see if the problem still exists?
-
original text: P17.sys
I have no sound on my pc am under XP service pack 3 have tried to use the Windows XP disk to install the driver for the Audio system built-in Audio of P17.sys without success. I bought Rocketfish to a sound and turns off sound internal on the bios and still get the same error and the show. Help, please...
Hello
- What is the exact error message you get?
- Are you not sound on the computer or Rocketfish?
If you do not get the sound on the computer, then all first activate the sound Board in the BIOS and check. Also, follow the steps in this link and check if that helps:
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsOtherwise, I suggest you to give us more information about the issue, so that we can help you better.
It will be useful.
-
In the window xp sp3 while I m trying to change the MAC ID of the loopback network card.
Its reflecting in the registry but does show is not in the details of network connection or ipconfig/all
its very urgent for me so please help me out to solve this problem
Note--> I tried to reproduce the same configuration in 5 systems XP SP3 but no luck! I so think its bug of XP SP3 because even works great for XP SP2 & 2007
Hello
You can follow the steps from the link below: http://social.technet.microsoft.com/Forums/en/itproxpsp/thread/0e1bf137-01e3-4dd5-9ce0-d686e6934ce4
NOTE: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.
-
I am trying to use the speakers on my midi keyboard as the default output for Windows 7 device
I am trying to use the speakers on my midi keyboard as the default output for Windows 7 device. I have a midi keyboard Casio CTK-3000 and you want everything to sound out the two speakers on the keyboard.
You can not.
You can exchange midi data between the keyboard and a PC via the USB port. But not strong like the keyboard is not an audio device and therefore doesn't have the proper drivers.
MIDI is not good in itself, it's just that a series of statements sent to a electonic module that transforms these 0 and 1 for sound samples. This isn't the same principle as an audio card/device.
See you soon,.
Jerry
-
Clock on windows 8 is wrong time, I tried to set the time of the internet but its still not working, think theres a bug in the clock time, anyone have the same problem for windows 8 and know how to fix?
It sets obtained :-) Sorry for the delay
Thank you very much! has worked perfectly!
-
I bought Photoshop elements & elements of Prime Minister to Best Buy 2 years. Finally opened and I tried to get the serial number online by using the identity card, but said website code is not valid. Called Best Buy, they said that adobe should have canceled activation because it has not been installed in a timely. How can I get a serial number for installation?
jotison64 wrote:
I bought Photoshop elements & first items at Best Buy 2 years. Finally opened and I tried to get the serial number online by using the identity card, but said website code is not valid. Called Best Buy, they said that adobe should have canceled activation because it has not been installed in a timely. How can I get a serial number for installation?
Work your way through this document in the end, step by step, and finally try to start a chat session. I hope that Adobe will straighten this out for you.
-
Expiration of my subscription of the CC, I bought a new but not be able to use again. He's trying to use the free trial version at the same time, but after installation of app still redirects me just say 'Renew subscription' and won't let me open. Help, please
Contact adobe support, https://helpx.adobe.com/contact.html
-
I'm having problems trying to use the
IM Tony, I have an iPhone 6 more and since the update, I tried to use the animated messages but seems that theres also problem with the power button. The arrow leaves no other icons appear.
Hi Indestruct1,
I understand that you encounter some problems that can use the new screen effects and effects in the bubble Messages application. I have updated to iOS 10 as well and I love the new effects. I'll be happy to review some information for you.
Use of the effects of message with iMessage on iPhone, iPad and iPod touch, this article stipulates that
You need iMessage to send from the effects of the message. If you are unsure if you use iMessage or SMS/MMS texts, learn the difference. If you cannot send or receive effects of bubbles, make sure that you haven't reduce Motion activated.
The same applies if you can't send or receive screen effects, check that reduce the Motion is turned off.
Thank you for bringing your question in Apple Support communities. Have a great weekend.
-
Lost my icon to send new messages in mail (appears in the toolbar, but not active). Can not send a new message in the mailbox (impossible to select) drop. I tried to use the toolbar Customize to drag an icon to the toolbar, but it doesn't work anymore. Using Mail 9.2 and OS X 10.11.2. Any help is appreciated.
The Send button will not be activated unless the message can be sent. Are you sure that you have entered a recipient and the account is online?
The connection doctor (window menu) displays errors.
-
Error code 80070643: update of security for Microsoft PowerPoint 2007 (KB957789)
Whenever I try to install the 'a security update for Microsoft PowerPoint 2007 (KB957789)", it is not installed and displays error Code 80070643. Please suggest me a solution for it.
VP Gupta (India)
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Maybe you are looking for
-
specific App password has not created
I am trying to create a specific app password. I go to security on appleid.apple.com, I click on edit, I click on generate the password, I see a password, I copy and paste into the app, I need to and it does not work. I try to select done first the
-
When I started this morning at the computer and clicked on the icon of Firefox, I received the message "unable to load XPCOM. What can I do to fix this?
-
Updated BIOS (Insyde H20) BACK - Satellite A300-24 X
Hello I bought the laptop Toshiba Satellite A300 - 24 X WITHOUT an operating system preinstalled. I'm using Linux and I want to update my BIOS to version 1.8 and 1.9 through a utility BACK/FreeDOS. The main problem is that the BIOS flash utility runs
-
Reset parameters 'sleep' Vista/Gateway nv52
My company recently purchased 4 new gateway nv52 with edition vista Home premium. We have a few tech questions. 1. computers will, randomly, reset the settings for the mode "Eve" of 'never sleep' for 30 minutes by default. It happens about twice a
-
We get an error "your copy of windows is not genuine".
Original title: Hi,. Hello the pc that I use now was purchased with a copy of Windows 7 and there is a recurring message saying "your copy of windows is not genuine". is there a simple way, I was able to validate my copy of windows? must something be