Upgade JOINT-2 6.0 (3) E1 to 6.1 (1) E1

Similar Questions

• Satellite A80: Cannot read the Joint Task Force

  Hi all...

  I have a satellite a-80 w / direct X 9.0 c and I download a game 'Joint Task Force', says the problem:

  Description Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family
  <0>VendorId 0 x 00008086 DeviceId 0 x 00002592
  <0>Revision SubSysId 0xFF001179 0 x 00000003
  .\3d\Engine.cpp(183): GEngine::Initialize: <0>the card does not support 1.1 shaders
  Your graphics card doesn't support Pixel Shaders or Vertex Shaders.

  the minimum required of the game:
  Windows 2000/xp
  Pentium 1.2 Ghz
  512 MB of RAM
  64 mb DirectX 9.0
  compatible video card
  NVIDIA GeForce 2
  class or higher

  What should do?
  Can I download anything to support the problem or I can't help with that?

  Thanks in advance for your answer

  Hello

  In my opinion the game does not work because of the problem of compatibility with the graphics card or graphics card driver.

  Part of the error message says this;
  + The card does not support 1.1 shaders your graphics card does not support Pixel Shaders or Vertex Shaders. +

  The minimum requirement of the game is a Nvidia GeForce 2 GPU.

  Is that your laptop uses an Intel graphics card and I think that the performance of the GPU it s not good enough to play this game

  But maybe an update of the graphics card driver could help but to be honest I don't see big risks to play this game.

  Good bye

• How to segment joints cracks between them using the wizard of vision?

  I built an application that processes the images taken from a camera high resolution with IR lighting. I noticed some cracks in the pavement could unite or are having joints that are cut into the concrete or ashalt. I need to distinguish between the cracks and joints so that I can classify and record their location on the image for a worksheet. I saw where someone has used the segmentation of the circular basin of separation is opposed, but it works for cracks (lines) so? If not is there ideas for 'disconnect the cracks in the joints. I have attached my script assistant of vision and an image of the sample. Thanks in advance for your advice.

  I tried the features of the morphology and the problem is it joining a crack for joints, if it was them that intersect and then counts as a single object/shape. I ended up finding a solution really good. I used the detection of edge advanced prior to dilation image, then use those points to detected lines to extract the joints and obtain the necessary information (width, length, position), then use the positions draw black pixels on the joints on the binary. This allowed me to get the information that I needed for the joints and also remove them from the binary image so that I can treat the cracks by flying over in he picture. Now, I just need to find a way to get some of the other object that the threshold is removed so that I find myself with just the cracks. Thanks for the help. Its always good to get some ideas from someone looking to another direction.

• How to simulate a joint manipulator

  Hello

  I want to simulate a robotic arm joint in labView Robotics toolkit.

  Please, help me to get started doing a joint robotic arm.

  Thank you

  Looking for your kind help

  M Abbas

  Hello mujahid.

  I built a robot arm 2 link with a joint turning for your reference.

  

• SysDump out joint operations to change map server or to check the cat

  Windows Vista Home Premium SP1, Intel Pentium Core 2 Duo 8400, 3.0 Ghz, 4 GB ram, Direct X 10, NVidia GeForce 9600GT.

  Games - Joint Operations-Typhoon Rising, escalation

  Reference of the manufacturer-Novalogic

  The problem occurs all the time, but enough that it's a matter of having to restart the game and re start the plan that I was playing at the time. I have check our server clan at a distance with Wolfrat and also use in the game of cat-XFire.

  This happens when you play Joint Operations Typhoon Rising and climbing as well.

  Any ideas would be appreciated

  Hello

  Please try to install the game in compatibility mode.  Here is some information that can be very practical...

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  -Check the functionality of the game under a spare user account

  -Clean Boot http://support.microsoft.com/kb/331796

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I use windows vista home 32 bit OEM prerium now I wan to upgade to windows 7

  I use windows vista home 32 bit OEM prerium now I wan to upgade to windows 7
  can I know how to update?

  halloah,
  Your previous was not clear.  If you buy an upgrade to Windows 7, you will get a product key so that it can be activated.  If you do not have a key, you will need to contact the company you bought Windows 7 from. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• RAM ERROR? JOINT OPS

  I TRIED TO GET ONLINE WITH 'JOINT OPERATIONS', BUT ALL THAT I GET IS THIS. "AN ERROR HAS OCCURRED WHILE ATTEMPTING TO CONNECT TO THE NETWORK SYSTEM. YOU DO NOT HAVE ENOUGH RAM OR YOU MAY SECURE NETWORK SOCKETS. MAKE SURE THAT YOU ARE NOT RUNNING OTHER NETWORK APPLICATIONS THAT CAN TAKE AWAY THESE RESOURCES. YOU CAN RECONFIGURE WHAT SOCKETS THIS GAME USES BY CHANGING THE GAME. CFG LOOK FOR MPGATESSERVERLOCALPORT CODE (NWEC15)

  I AM RUNNING 4GIGS OF RAM.
  THIS GAME NEEDS 1 GIG
  THIS GAME FOR 2 YEARS RAN FINE
  HE WORKED UNTIL 2 DAYS AGO
  I UNINSTALLED AND REINSTALLED THE GAME TWICE AND PUT IN ALL THE UPDATES
  IT APPEARS THAT HE MAY HAVE STARTED SHORTLY AFTER I SWITCHED TO A WIRELESS INTERNET CONNECTION

  klockarsm,
  There are several things that could be the cause, do not know how much of your network changed when you changed to wireless.  This issue is caused by a type of firewall - security, protection against spywares, protection against viruses, etc., blocks some ports that you can use via your router to connect to your game server.  First of all, make sure that the UDP Ports: 7597, 32768, 49152 and 64206 are transmitted thorugh the router to your internal IP address.  Then check your anti virus software and spyware protection "game mode".  There is a post about this same problem on the forum site Operations Task Force who said that the problem, in one case at least, proved Spysweeper running on the wireless router.  I hope this helps.  Let us know if we can be of further assistance.

  Thank you, Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Any way to unlock the application of JOINT?

  Seal has a free app Amazon the day where I downloaded a few days ago. I really don't think that I installed it! However, the next thing I know, it has been installed and for many functions of Xoom, it wants me to draw a pattern in the points such as the splash screen. My normal startup model isn't knit and after I put in the wrong point fancy a few times, he asked for my "favorite Vegas game. I tried to respond to the Vegas games that I know (my true favorite is Ski-Ball, what is yours?), but none of them worked. It allows me to do as long as I have the patience, that is to say not much longer.

  I can still run applications that were on my Xoom before this debacle, but none of the applications that were installed after him. In addition, the parameters and Android Assistant are blocked. A bit boring.

  So, assuming that you believe me that it is my Xoom and not something that fell on a truck, is there a way to delete the entire application? Or am I stuck with making a sort of reset which will erase everything? And how would I do that, anyway?

  Thanks for any help!

  babyxoomer

  I installed this app and works a lot to block access of my grandchildren, my apps shortlisted to open the set-up of Seal.

  At some point, you or any other user of your Xoom must have select a reason for joint to install. You have somebody else using your Xoom?

  Poko

  Published by: Poko... have you tried to uninstall this application yet?

• HP Pavilion g7-2240us Notebook needs upgade BluRay player

  I have a HP Pavilion g7-2240us Notebook and I want to install a BluRay player is an upgade that can be done on this model and have to be HP's BluRay player or any diving BluRay won't work.

  HP part number, Blu-Ray/DVD burner drive (not Blu - Ray burner) is:

  Drive Blu - ray ROM DVD±R/RW Super Multi Double layer 682750-001

  Here is the Service Manual:

  Manual

  See page 38.

  HP is such a high volume that it is usually just as profitable to order the real part of HP from eBay.

  This is a Blu - Ray burner that will work for $80:

  http://www.eBay.com/ITM/HP-682750-001-Blu-ray-burner-BD-R-ere-DVD-RW-DL-SATA-combo-drive-G7-2000-/181289081492?PT=US_CD_DVD_Blu_Ray_Drives&hash=item2a35abda94

  You will need to discuss your façade on this one which is not too difficult to do.

  It's the Blu - Ray ROM only for less than $50:

  http://www.eBay.com/ITM/F-HP-Pavilion-G4-G6-G7-G6T-G7T-series-repalcement-BD-combo-Blu-ray-BD-ROM-drive-/251201442825?PT=US_CD_DVD_Blu_Ray_Drives&hash=item3a7cc5d409

  It's the front.

  You need Blu - Ray movie playback software, but if you googled around a bit you will find sites where you can download additional files that will make the free VLC Player work with Blu - Ray. The recent multimedia packages like Nero will burn Blu - Ray discs if you decide to go this route.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• legality of the use of vista software to another computer after upgade to windows vista

  legality of the use of vista software to another computer after upgade from vista to windowslegality the software vista to another computer after upgade to windowslegality vista software vista to another computer after upgade to windows vista

  legality of the use of vista software to another computer after upgade from vista to windowslegality the software vista to another computer after upgade to windowslegality vista software vista to another computer after upgade to windows vista

  Hey rjmhhar

  If you use a license of operating system vista as part of an upgrade, it is related to the new upgrade license

  You can use it NOT then install vista on another computer when it is used in the installation as part of this upgrade

  Walter, the time zone traveller

• How can I upgade base to the premium vista without wiping my hard drive?

  I have a leagal licensed vista Home premium dvd. When I try to upgade of Vista home basic it won't let me choose the upgrade option and Microsoft is no longer the fact on the web.

  My warranty has expired and I n know what to do.

  I can't afford suppord, HELP PLEASE!

  While the desktop of Windows Vista Home Basic, insert your Windows Vista Home Premium DVD disc into the DVD drive, and then select 'upgrade' when the installation menu appears.  That's assuming you have a "detail" and not a "OEM" Windows Vista Home Premium DVD disc. Carey Frisch

• Unable to access JOINT-2

  Hello...

  Sometimes my IDSM2 stops just alert reporting. Their State of connection in VMS SDI monitor will show 'connected', and when I try to SSH to the IDSM2 they request a user name and enter as soon as I hit they'll release session SSH the below error message printing. When they do, are also inaccessible via HTTPS. And when I try session inside through the switch in which they reside, they hang right after that I entered a user name. I usually can reset their via the switch command "hw-module", and after several times their resetting, they will start working again. I'm just curious as to why they do this, and if I do something to cause that can be avoided. They are running the latest version of the software 4and signatures, although I always had a problem with them that even in older versions. Here is the error message that they print.

  kernel: do_get_write_access() to transaction.c:721 Assertion failure: "(((jh2bh (jh))-> b_state & (1UL)).< bh_uptodate))="" !="">

  Thanks in advance

  It is a known problem with busy sensors where the hard drive gets finally not synchronized because of its constant use (something that hard drives are not really designed for) and the entire system crashes. Essentially, each alert that the JOINT see is written in a rotating 4Gig log file on the hard drive and with sensors that never see a large number of alerts from the hard drive gets a chance to stop and turns eventually out of alignment. Quick, albeit temporary difficulty, is the blade stop, wait 5 minutes, then turn on the power again. The shutdown procedure runs correctly on the hard drive and it resets. If the sensor is busy in many, the problem will occur again.

  We have implemented some fixes to work around this problem. You mention that you are running the latest code, but you must apply the latest service pack patch also work around this problem.

  Patches are obtained from here:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/IDs-patches

  The last patch 'g', they are cumulative as signature update so apply it allows you to get all the previous too. Apply it and you should find that everything works MUCH better he did.

• Documents required for JOINT-2

  The second generation Cisco JOINT-2 protects switched environments by integrating all the features of the Office IPS directly to the network through the widely deployed Cisco Catalyst chassis infrastructure. This integration allows the user to monitor traffic directly on the backplane to switch a logical platform for additional services such as firewall and IPS.

  And let's deploy this module soon 0n Cat 6509 is have a documentation about the configuration of this module.

  Thank you and I'd really appreciate it.

  Here is a link to the documentation of IPS v5.0:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids11/index.htm

  Here is a link to the IPS v5.0 cli configuration guide:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids11/cliguide/index.htm

  Here is a link to documentation IPS 5.0 regarding the configuration of the JOINT-2:

  http://www.Cisco.com/univercd/CC/TD/doc/product/iaabu/csids/csids11/cliguide/cliidsm2.htm

• JOINT-2 update: which restarts?

  I need to upgrade the JOINT-2 Modules in my 6513 switches worm. 4.x to 5.0.1. (a significant modernization). The procedures show that "the system will restart at the end of the upgrade... ». My question is which system will restart? Will just restart JOINT-2 module or the whole switch?

  Just the JOINT - 2, not the switch.

• JOINT-2, using a lot of memory

  Hello.

  I question obout JOINT-2 that is using 98% of the memory.

  Output sh worm:

  With the help of 1944629248 of 1979682816 memory available bytes (98% of use)

  With 4.3 G off bytes 17 G of disk space available (27% of use)

  It is normal that it is using 98% of memory durning normal operation or there is a problem?

  If this is not normal if you please tell me how I can trobuleshoot what is wrong with it.

  This message is misleading, because it includes the memory allocated for the system process as well as the memory allocated for the cache. Because cache

  memory is really "free". It is available for allocation at any time.

  It's actually a bug in cosmetics that you use in.

  If you want to check during periods of what you believe to be the high memory usage, you can connect as the user of the service

  (if you have not created a user of the service you can do this through):

  1. log in using the account "cisco", the prompt will look like:

  probe #.

  2. Enter configure terminal mode:

  probe # configure terminal

  3. create the service account:

  username Sensor (config) # service password xxx privilege service

  Then connect on the sensor as the user of the service and run the command 'free. ' What 'sh worm' reports is the column "used."

  The "Mem: ' row, column" used"is the amount of memory (in kilobytes) that reports the"show version"command." However, this total includes the amount 'cached '.

  The formula to calculate the actual memory used is:

  ((used-Cached) / total) * 100 = percentage of memory used.