Upgrade memory 520-1050 TS

It would have been great if the 520-1050 TS came with its maximum in memory of 8 MB instead of 6 MB, but no problem, it can be upgraded.

My question, it seems 2 types of memory upgrades can be used and wanted to find who I use because I've always loved my systems to memory max. The specs on the upgrades memory say the following:

-==============================================

Boxerm, welcome to the forum.

Given that the motherboard supports the memory dual channel, you will need to replace the existing memory.  It seems that there are only two slots.  So, you want to buy a set (2 x 4 GB = 8 GB) you ensure that you have dual channel.  Dual channel is faster.  I would buy the PC3-10600 (DDR3-1333).  Here's a good explanation of the speed of memory.  If you're like me when I started to learn about the RAM, most of this information is difficult to understand.  However, it will give you a good learning experience.

I suggest to use the Crucial memory.  Here is the memory they recommend for your computer.  Recommended memory is guaranteed to work or it will be replaced free of charge for you.  I had read the entire page, as it provides good information.

If your problem is solved, please click "accept as a Solution.

Tags: HP Desktops

Similar Questions

  • REMOVING BACK PANEL OF 610Y-1050 TO UPGRADE MEMORY

    Just bought a TouchSmart 610y-1050 and want to upgrade memory.  Done all the instructions say, but cannot remove the Panel at the rear of the system memory.  The instructions tell you 10-15 minutes, but I spent 2 hours.  Something is not.  Anyone has any advice, please.

    Hello

    Here is a guide on how to remove the rear panel.

    http://support.HP.com/us-en/document/c02727029

    There are a few other videos on the link below that you may find useful - especially the last of them.

    http://support.HP.com/us-en/document/c01874598

    Kind regards

    DP - K

  • Upgrade memory on an all in a single LX830

    I may upgrade the 4 GB provided to meet the requirements of the program. Additional memory needs to be installed in pairs? The existing 4 GB occupies a dwelling, can I mount 8 GB in another location or it will be incompatible?

    Well, mainly upgrade memory depends on the support of the chipset/CPU.

    Not quite sure what computer Toshiba LX830 do you have exactly but as far as I know the L830 all in one units would support up to 16 GB of RAM.

    A property used by a 4 GB RAM module and housing is free.
    This is why it must be able to use another additional module of 8 GB RAM.

    But of course, another module of 8 GB RAM should be compatible with the current 4 GB of RAM.
    Otherwise, you will get some compatibility issues

  • Upgrade memory on NB300-108

    Looking to upgrade the RAM to 2 GB on my NB300-108

    Have you looked at the website of Toshiba and the cost, but there seems to be a plethora of alternative sites with upgrades memory compatible when I put in the part number.

    Would like to receive experiences in the forum about alternatives etc.

    Thank you

    Hello

    The laptop supports DDR2 800 MHz SO-DIMM or PC2-5300 (DDR2 667 Mhz) modules.
    These modules are provided by different companies.
    There are good quality modules and less quality modules

    Of course, you can choose and buy the cheapest, but in this case, you use the risk of compatibility problems.

    I made good experiences with RAM from Kingston. These are of good quality and not too expensive modules

  • Upgrading memory on the NB550D - 11 d - 4 GB of RAM are possible

    To anyone who thinks of a memory upgrade on the NB550D:

    The NB550D supports up to 4 GB of memory, not only 2 GB as mentioned by Toshiba in their specifications.
    Upgrade memory to 2 GB is _only limited_ by the pre installed Windows 7 Starter OS, and not by the netbook itself.

    I use Linux Mint 11 Katya, 64-bit and my system works perfectly well with a 4 GB ram module. If you want to use the full support for 4 GB ram, get rid of the Win 7 Starter operating system.

    Specifications for more memory ram volume are DDR3 1333 MHz PC3-10600 SO-Dimm. I chose a 4 GB of Corsair module, because of the guarantee of 30 years of offers from Corsair.

    It took me a while to find this out hope, that this will be a help to all those who are just as secure as I was how to upgrade memory NB550D. Good luck. (o).

    Thanks for the comments

    Also it of important to mention than the 32-bit systems (not serious if its Linux or Windows) would recognize only 3.2 GB since it is a limitation of 32-bit
    So to use all of the 4 GB RAM 64-bit system is required.

  • Question about upgrading memory Satellite M55-S1001

    can you please recommend what to do? I want to make my satellite m55-s1001 run faster please let me know, what do you recommend: 512 MB or 1 GB of memory? I'm not familiar with updates so please help!

    Hello

    First of all, if you want to go for fastest laptop, you should start with simple things.
    Try to defragment the disk, turn off the background process is not necessary, etc.
    Upgrade memory will the powerful laptop and of course a lot more quickly.

    To my knowledge the Satellite M55 should support the bars of memory 2 x 1024MB, and I also recommend the use of 1024MB instead of 512 MB module.

  • I have iMac 5 k mid 2015 upgrading memory

    How to upgrade memory on iMac 5 k mid 2015 10.11.3 el capitan bones of 27 inches

    Installation video are visible by clicking on

    http://eShop.MacSales.com/installvideos/iMac-27-inch-5K-late-2015-memory/

  • Satellite L50 - A - 1 5 PSKK6E does not start after upgrading memory

    Upgrade memory L50 - A - 1 5 pskk6e

    I have a memory ddr3 4 gb 1rx8 pc3 - 12800 S-11-12-b2 hynix and I tried to add another memory
    memory DDR3 4 gb 1rx8 hynix pc3 - 12800 S-11-11-b2, but it does not boot up the laptop.

    I tried to mount only the new but it won't start.

    Some ideas?

    I think that it s you already know that this Satellite L50 - has - 1 5 would support max 16 GB of RAM (2 x 8 GB)

    But why, box for computer laptop doesn t is very simple: the new modules are not compatible.

    I found modules recommended by Toshiba.
    These are:
    8GB DDR3L - 1600 PA5104U-1M8G
    4 GB DDR3L - 1600 PA5104U-1M4G

    Both are made of Kingston and the specifications are:

    Memory speed: 1600 Mhz PC3-12800
    Capacity: 8 GB (1x8GB module)
    Pins: 204 SODIMM
    Type of RAM: DDR3 SODIMM
    Verifying the integrity of data: non ECC
    Specifications:
    Latency (CL) CASES: 11
    Voltage: 1.35v

  • Upgrade memory for Satellite 2800 400

    I am trying to upgrade my ram to 128 on the laptop. After following the instructions for the instillation, that I turned the laptop on to find that it was slower than before and that the new ram had not registered as 128, and always thought it was 64 in someone can help me solve this ir is there anything I can do?

    Hi Ben

    Maybe you used the memory modules bad.
    As far as I know that you can upgrade memory for max 192 MB
    The 64 MB has been installed in an internal memory and cannot be deleted.

    I found these compatible modules:
    PA3003U - 1 M 03 32 MB
    PS3004U - 1 M 06 64 MB
    PS3005U - 1 M 12 128 MB

  • Upgrade memory for Equium L20-264

    Hello

    I have an Equium L20-264, which is "dying" and advised to upgrade memory. Specs below.

    Equium L20 - 264 part number: key features PSL2ZE-00500CAV - Numtxpackets® Celerona® M processor 360
    -Windows® XP Home Edition
    -60 GB hard drive
    -256 MB DDR2 RAM
    -15 "TFT color display
    -Drive DVD Super Multi (Double Layer)

    Issues related to the:

    1. How can I remove the existing memory? Is there a guide of the user on this operation?

    2 How many slots have?

    3. What is the max memory per slot?

    4. can I buy Toshiba memory directly?

    It is rather urgent and would like a quick answer.

    Thanks in advance
    Rag99

    Hi mate.

    As far as I know your laptop supports two memory locations.
    They must be placed at the bottom of the unit.
    If you n t know how to change this then I recommend consulted the user manual!
    The manual can be downloaded from the Toshiba European page.
    I think that the laptop can be upgraded to 2 GB of RAM. So, you can use 1 GB of RAM in one slot.

    PS: you must use the RAM DDR2 PC2-4200 memory - 200pin modules

  • HP ENVY Sleekbook 4-1000en: upgrading memory on ENVY 4-1000en

    Hello

    Since I have some basic computer knowledge, but I want to be sure before you go for it, I need your advice.

    I have a HP ENVY Sleekbook 4-1000en and I have recently upgraded to HDD and the OS.

    I think the upgrade of RAM have, as far as I know that you need 2 memories of the same type, so I guess I can't buy an another 4 GB right?

    Do I need 2 x 4 GB of DDR3 memory, of the same type to make it work? For example they would work very well

    http://www.corsair.com/en/vengeance-8gb-high-performance-sodimm-memory-upgrade-kit-cmsx8gx3m2a1600c9 ?

    Finally the upgrade memory requires any other configuration after plugin in? Is a format for example?

    Thanks for your time.

    Hello

    The following link shows the specifications of your computer:

    http://support.HP.com/us-en/document/c03362810

    It has 4 GB of RAM now. The question is 4 GB in a dwelling or in the two slots (2 + 2).

    b in the case of a home, you can just buy another 4GB with SAME part/characteristics of the EXISTING RAM and install in the second slot.

    (b) if in 2 slots (IE 2 + 2), then throw them both and buy 2 new sticks 4 GB each. Agin use even care.

    You don't need to format RAM. Moreover, we have only to format HDD/SSD but not RAM. And Yes, push in the two slots must be same same specs even marks to be able to get all the benefits.

    Kind regards.

  • Satellite Pro 2100 - upgrade - upgrade memory RAM

    Hello together!

    For your information:

    Upgrade memory today to 2 Toshiba Satellite Pro 2100 (1.9 GH, 256 MB DDR - RAM initially), both up to 1 GB, all fine and no problems.

    Wanted to just end rumors "only 512 MB all together" or even less.

    If you are looking for, don't forget to think of the specifications:

    DDR-266 (PC2100)
    DDR-SDRAM, SO-DIMM
    200 PINS
    2.5 CL

    concerning the frequency of the RAM, building shape etc.

    Greetings

    L0nestar

    P.S.: Don't think that a debate is necessary, thread could be closed...

    According to the specifications of the computer laptop Satellite Pro has two memory slots and can be upgraded up to 1 GB. It is very useful to have confirmation on the RAM upgrade for this model of laptop old but still good.

    Good day.

  • Portege 3500 - upgrade memory

    Necessary upgrade memory for a p3500. 'Expert' advised two sticks of 512 MB PC133, but on opening the rear of the location that a laptop computer and on the insertion of the new RAM it gives an error code beep. Is there than a single slot? and if so what maximum capacity and what type of RAM will it take?

    Hi Jeffrey,.

    As far as I know the 3500 Series provided with a removable module of RAM of 128 MB, 256 MB or 512 MB depending on what model and specifications you purchased. There is one other remaining slot for expansion purposes.

    The total support for the 3500 Series RAM is 2 GB and the type of RAM should be SODIMM PC133 144 pins.

    It is important that you match the RAM modules that your RAM module existing (one removable) is of the same type you new RAM module. Of course, you can always delete the original from the RAM and insert two new modules of RAM instead.

    Please check the following URL for more information on the available RAM module type.

    http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=5371&ft=m&St=3

    HTH

  • upgrade memory in a Portege 3410ct

    I tried installing memory of 128 MB PA3034u 3410ct, but on commissioning a message comes up saying that the ACPI BIOS is not fully compliant with the ACPI specification.
    I downloaded the latest BIOS setings but makes no difference. Will not start just yet. Clues as to correct the problem, other that not upgrading memory.

    Hello!

    This problem may occur if you add the memory (RAM) to the computer when it is in hibernation.

    When the computer comes out of hibernation mode and load the file Hiberfil.sys, Microsoft Windows detects the change in the State of the memory, and then you receive the error message.

    To resolve this issue, restart your computer.

    If the problem persists, start the computer by using an emergency boot disk, and then delete the Hiberfil.sys file.

    Good bye

  • Firefox 4 beta too slow / crashing after upgrade memory?

    Hello

    my beta firefox started crashing my whole system yesterday and only noticeable change I did was upgrade memory of 3 to 4 GB of RAM...

    I tested my system widely and it works very well until firefox is started, after that, the system started crashing and takes forever to be reactive. I uninstalled and reinstalled firefox, tried running without addons, I tried to close all the tabs and all Eske I remembered... still no luck.

    I am desperate because I really wanted to keep this beta on my computer, and cuz is a new facility, I can not install firefox 3.6 on side by side, I only have an option 'upgrade' on the installation wizard...

    What can I do to fix this?

    Thanks in advance!

    The steps to troubleshoot and diagnose problems of Firefox would say you always try in questions to troubleshoot Firefox in Safe Mode of course some additional software may conflict, it is even more likely if you are using a beta version of firefox and probably the beta or alpha some of the addons or plugins.

Maybe you are looking for

  • Disable two-factor authentication

    I want to disable two-factor authentication

  • Get blue screen after Windows KB968389 updates

    I got the blue screen after that almost each update of Windows, but later is the following: Internet Explorer 8 for Windows Vista for x 64-based systems (25/08/09)Update for Windows Vista for x 64-based systems (KB968389) (11/08/09) I have a new Dell

  • Deletion and blocking

    Dear Forum members Two days ago, I received a message from the E-mail address is removed from the privacy * and I thought that I had blocked and deleted, but received another message today. How can I block something like this or do I just continue to

  • Security Scan Pop Ups

    I get RegWork pop ups (every two minutes or more) and I never installed it.  I tried to delete the associated files (I think that PC Max) and it always happens.  What can I do?

  • Vista boot, apparently due to the update

    Hello My laptop was working fine last night, but as I have turned on this morning, I am unable to boot. Windows will remain at a black screen and then give me the boot option repair or start normally. Startup Repair found a problem, that it cannot co