Upgrade memory up to 8 GB shows only 3.48 GB available

Similar Questions

• After the memory update satellite L20-206 shows only 1 GB

  Hello, could someone tell me:
  Ive had 2 modules of 512 RAM (Samsung) & 256 Hynix. After that I decided to install 1024 Mb (Crucial (Micron), Bios, and OS doest see 256 MB module - 1024 MB only.

  The same photo that I install 1024 MB + 512 MB. I already flashed with the new Bios - it did not help.
  But the utillity CPU - Z in Windows recongnizes modules 2 in both cases?

  P.S. Should I install the same module as my Crucial (Micron) or my laptop supports no more than 1 GB?

  Now, using a 1024 module, well enough, but maybe in the future, I would like to have more.

  Well, it's very strange because the L20-206 could be upgraded to 2 GB max memory!
  In this case, you can use the modules of memory 2x1024Mo!

  The laptop should recognize two modules installed! But maybe the two modules aren't compatible? In any case, I advise to use the same modules with the same specifications.
  I found a few modules recommended by Toshiba. So maybe you want to use these:
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• LUN 10 to shows only 1.13 GB available

  Hi all -

  I have a Dell MD3000 linked directly connected to a Dell r710.  I have created a virtual disk 10TB and VMware sees to 10 to, when I go to add storage, although it only shows available 1.113.

  I tried resetting the table, re-create the virtual disk.  I'm out of ideas.

  Any help is appreciated.

  Hello.

  See KB 1006630.

  Good luck!

• Upgrade memory satellite A110-103 - the Bios shows only 1 GB of RAM

  {color: #000000} Dear Forum Toshiba,

  I own a Toshiba Satellite A110-103 (PSABE6) bought in 2006 of the Belgium.
  I have trouble about an upgrade of RAM for this laptop. The laptop was originally a Samsung 512 MB of RAM.
  I tried to upgrade the RAM to its maximum capaity supported 2 GB.
  I bought and installed 2 Kingstone SODIMM 1 GB Value Ram DDR2 PC2 4300 units compatible with the laptop, but

  in the BIOS, I see only 1 GB of RAM.
  I tested each RAM separately and they work very well. The problem is that when I install in my

  locations of the laptop, my BIOS sees no Ram.Instead 2 GB 2 GB, it shows only 1 GB. I updated my BIOS for more later

  version 1.70 (for XP), but the laptop continues to show only 1 GB.

  I tested the RAM separately:
  -inserted only 1 stick in the drive and the pc started ok showing 1 GB of RAM
  -then I inserted the same stick in another location and it also worked well showing 1 GB of RAM
  - then I checked another unit of the RAM in the same way and worked well
  -When I try to put 1 GB of Ram and the old 512 MB RAm the BIOS correctly showed the new value of 1.5 GB
  -i also checked the other 1 GB of ram and the old 512 MB of ram and showed good again in the Bios with the value of 1.5 GB
  - but when I tried to put the 2 ram set units to obtain the BIOS only detected 1 GB 2 GB.

  Here's the description detailed 1 GB modules that I try to install:

  SLOT #1
  The module size: 1024
  Band Max bandwidth: PC2-4300(266Mhz)
  Manufacturer: Kingston
  Reference number: 9905293 - 0.14A00LF
  Serial number: 6ACC0C46
  Frequency: 200-266
  CASE # standby time: 3,0-4,0
  RAS # for CASE #: 3-4
  Tras:9 - 12
  TRC: 12-16
  Voltage: 1, 8V - 1, 8V

  SLOT #2
  The module size: 1024
  Band Max bandwidth: PC2-4300(266Mhz)
  Manufacturer: Kingston
  Serial number: AD0CCE10
  Frequency: 200-266
  CASE # standby time: 3,0-4,0
  RAS # for CASE #: 3-4
  Tras:9 - 12
  TRC: 12-16
  Voltage: 1, 8V - 1, 8V

  What should I do?
  Help, please!

  It IS concerning.
  Marius Militarescu

  [email protected]

  {color}

  I think the problem is that the two s of RAM are not compatible, but it is not explained to me because use you two identical modules.

  In your case I return the RAM to the computer dealer and say the modules work together in your notebook, but your laptop definitely supports 2 GB of RAM.

  I think that there is no other way because you have updated your BIOS to the latest version.
  Here is the part number for RAM Toshiba compatible:
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

• I just upgraded to Thunderbird 31.3.0 (on Windows 7). Now I can no longer launch Thunderbird. This shows only the Mozilla Crash Reporter every time.

  I just upgraded to Thunderbird 31.3.0 (on Windows 7). Now I can no longer launch Thunderbird. This shows only the Mozilla Crash Reporter every time.

  How do I recover from this?
  

  Is it possible to revert to a previous version?

  You can download the previous version of . mozilla.org and install it. After that revert to your previous version, you can check your incident reports to see what was causing the problem via help-> troubleshooting information...

• Satellite A660 - 11 M - upgraded memory to 8 GB only 3.93 GB usable

  I just upgraded my A660 to 8 GB using 2 x recommended Toshiba Go 4 sticks of memory. (DDR3 4GB 1066 Mhz SODIMM)
  Running Windows 7 64-Bit OS

  DxDiag properties and computer all seem to recognize all 8 GB, but in Taskmanager it recognizes only 4026MB of memory physicam.

  Running latest BIOS 1.80

  Help... What is happening... what I did wrong/not done...?

  DXDiag data as follows

  ------------------
  Information System
  ------------------
  Time of this report: 11/12/2010, 08:50:40
  Computer name: WILL-TOSHIBA
  Operating system: Windows 7 Enterprise 64-bit (6.1, Build 7600) (7600.win7_gdr.100618 - 1621)
  Language: English (regional setting: English)
  System manufacturer: TOSHIBA
  System model: Satellite A660
  BIOS: Phoenix SecureCore Version 1.80
  Processor: Intel Core i7 CPU Q 720 @ 1.60 GHz (8 CPUs), ~1.6GHz
  * Memory: 8192MB RAM *.
  * Available OS memory: 4026MB RAM *.
  * Page file: 1990MB used, 6060 MB available space *.
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7600.16385 64 bit Unicode

  Hello

  That means the POST (power on self-test) screen appears; 4 GB or 8 GB of RAM?
  All memory is recognized in the BIOS?
  If so, then the memory has been recognized correctly and Windows 7 64-bit should be able to use all 8 GB of RAM.

• Qosmio G30-10 b: BIOS shows only 3328 MB instead of 4 GB of memory

  I've updated by laptop 4 GB of memory. The reports correctly that 4096 MB in the BIOS screen. When you start however it shows only as 3328 MB and that's obviously what Vista reports. (I know that 32-bit Windows systems probably will not see any memory, but probably checking the BIOS boot should display correctly).

  Last update of the BIOS was done - running on v3.50

  Post edited by: gerhards

  If the BIOS recognizes all 4 MB of memory, so I don't think it could have a bad influence on the performance of the laptop.
  As you already suggested the whole 4 MB can be recognized by the operating system 32-bit Windows due to the limitation of the system.

  Recommend checking this Toshiba document:
  http://support.toshiba-tro.de/KB0/TSB7601WE0007R01.htm

  Please check the part called "(detailed) resolution:
  I put the memory 2x2gb bars in my computer laptop and the BIOS and the operating system is worth about 3 GB
  So BIOS might watch also a value of bad memory

• Recent crash computer had to wipe HD-have Extd CS3 and CS5 upgrade Adobe disks acct shows only CS5 registration of origin. What should I do?

  Had a recent computer breakdown and had to wipe the HD. I'm ready to recharge both my CS3 Extended so my CS5 upgrade disk drive then. However, in looking at my Adobe account it shows only my CS5, CS3 registration registration. What I do in this situation?

  you just need to know your serial numbers cs5 and cs3 (and those that should be stored locally) and the installation of cs5 file.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 9 | 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6.4| 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Satellite Pro A200 - shows only 3 GB instead of 4 GB of RAM

  Hello

  2 years ago I had a Satellite Pro A200 as a professional laptop and it works with XP SP2, later with SP3. With 2 GB, it shows 2 GB memory in Windows - and I know it's a Radeon 7500 with 256 MB memory graphics individual, and there is no shared memory.

  I upgraded to 4 GB, but Windows shows exactly 3 GB. BIOS shows 4 GB and ATI system monitor shows 4 GB. I know that 4 GB is not possible under XP 32-bit, only on Windows 2003 R2 32 bit or Vista - but on desktop systems, I've seen values between 3.3 and 3.7 GB.

  So, where's the memory? It looks like a bug - the chips of memory have two 2 GB I checked this. Because it's a company laptop I can not just switch to 64-bit XP :-(

  There's no option in the BIOS - first I thought that it is the graphics card, but mine has independent graphics with own memory so that the computer comes up with MB 2048 or 4096 after the upgrade.

  Shared memory would show about 1900 MB of RAM for the operating system as my private EEEpc.

  Hi shadowmaster_1,

  > I know that 4 GB is not possible under XP 32 bit
  Then why do you ask this question here if you already know? Moreover, it s not a limitation in XP, it s a material limitation on all 32-bit systems

  > only on Windows 2003 R2 32 bit or Vista
  And who says that Windows 2003 or Vista can use 4 GB? Okay, there's an update for Vista where 4 GB correct displayed in system properties, but that doesn't make no difference. Vista 32 bit peut t use all of 4GB, it s only cosmetic improvements! ;)

  > So where is memory?
  Memory is installed on your computer, but can t be used complelty with a 32 bit OS.

  At the end of the story: If you want to use 4 GB, you need to install a 64 bit OS. On all the 32 bit OS, you can use only upward to ~3.2GB RAM!

• HP ENVY Sleekbook 4-1000en: upgrading memory on ENVY 4-1000en

  Hello

  Since I have some basic computer knowledge, but I want to be sure before you go for it, I need your advice.

  I have a HP ENVY Sleekbook 4-1000en and I have recently upgraded to HDD and the OS.

  I think the upgrade of RAM have, as far as I know that you need 2 memories of the same type, so I guess I can't buy an another 4 GB right?

  Do I need 2 x 4 GB of DDR3 memory, of the same type to make it work? For example they would work very well

  http://www.corsair.com/en/vengeance-8gb-high-performance-sodimm-memory-upgrade-kit-cmsx8gx3m2a1600c9 ?

  Finally the upgrade memory requires any other configuration after plugin in? Is a format for example?

  Thanks for your time.

  Hello

  The following link shows the specifications of your computer:

  http://support.HP.com/us-en/document/c03362810

  It has 4 GB of RAM now. The question is 4 GB in a dwelling or in the two slots (2 + 2).

  b in the case of a home, you can just buy another 4GB with SAME part/characteristics of the EXISTING RAM and install in the second slot.

  (b) if in 2 slots (IE 2 + 2), then throw them both and buy 2 new sticks 4 GB each. Agin use even care.

  You don't need to format RAM. Moreover, we have only to format HDD/SSD but not RAM. And Yes, push in the two slots must be same same specs even marks to be able to get all the benefits.

  Kind regards.

• upgrade memory 2540p

  How many modules memory are there on the 2540p?

  • Of after Crucial, there are two. According to my system, I have 4 GB installed (3.80 GB usable).
  • But when I take the cover on the back, I can only find a single SODIM 2 GB module and on You Tube, they show only one.

  So, how to upgrade the memory up to 8 GB, which is what HP support site says that the 2540p can take?

  Thank you very much

  Hello

  Second memory is hidden under the keyboard. First, you must remove the keyboard, and then you will need to unscrew the screw that holds the shield of memory. Lift the right edge of the shield of memory and slide it to the right until the tabs on the left edge of the ecu memory are free of their slots on the top of the cover and remove.
  Now, you will see the second memory module.

  Note:

  Don't forget to unplug the AC adapter and the battery before you follow these steps.

• Satellite L100 113 starts slowly after upgrade memory

  Hello

  Toshiba Satellite L100 113 PSLA3E-02401JRU starts slowly after upgrade memory with Kingston KTT533D2-512 (512 MB) of memory.
  When I press the 'power' button, it flashes, starts the fans and HARD drive several times. Then it shows BIOS start messages by memory full 768 MB and starts Windows XP without a problem.
  This behavior is noticed only after "shut down."
  It does not happen with "restart".
  What can I do to eliminate this long "attempts" to start my laptop computer?

  Thank you
  Novomir Kovalenko

  Hello

  This problem appears before upgrade memory?
  Have you used exactly the same memory modules?
  If this isn't the case, then perhaps there are a few compatibility issues.

  Usually, after the insertion of the modules you must enter the BIOS and then save the settings. Please it and eventually the laptop will start without any problems.

• Upgrade memory IdeaCenter AIO - 300 23 ACL options

  Hello world

  can someone knows what an opption to upgrade momory for this device? Lenovo spec says - up to 4 GB. However Lenovo Solution Center indicates that it is possible to install the 16 GB of RAM, 8 GB X 2 Slots. Scaner of crucial system shows only 8 GB max and a memory location . Any obsesive?

  Thank you

  Nick

  Center of Solution can sometimes be wrong. Don't know why, I watched a few fake news and fake positive scans on this

• Upgrade memory on R7-572-6423

  I have not seen a thread here on the new model, so I thought I would ask here.  The published specifications state that the laptop is expandable up to 16 GB of ram.  However, I run CPU - Z to check the installed memory.  It is said there are two sticks of Kingston Value Ram of 4 GB installed in banks 1 and 3.  It shows 2 and 4 banks in a vacuum.

  Now I see that there are only 8 GB modules available on the market.  Could not upgrade the laptop to 24 or 32 GB of ram?

  Also, as I have a screwdriver torx on order I could not open the system remains to be verified.  There are really 4 available memory slots?  I see no mention of the previous model had soldered chips.

  
  

• Upgrade memory Acer Aspire 5552

  Hello

  I just upgraded to 4 GB of RAM 8 GB on my Aspire 5552. But when I display the properties of the system that it has detected 8.00 GB of RAM, but only 3.74 GB is used. How can I activate the rest of the extra memory I added?

  The RAM I installed is accompanied by 8 GB of PC3 - 12800 DDR3 - 1600 RAM, consisting of 2 x 4 GB SODIMM laptop computer Ramaxel.
  The RAM in BIOS is showing only 8192 MB total memory with 256 MB of video memory.

  Acer Tech support advised the following:

  1. click on start, type msconfig in the search programs and files, and then click msconfig in the list programs.

  2. in the System Configuration window, click Advanced on the start tab.

  3 clear the maximum memory check box, and then click OK.

  4 restart the computer.

  When I checked msconfig memory Maximum option was already unchecked. I tried to check (this is the value of 8192) and reboot, but no change then I unchecked and restarted again, but still only 3.74 GB are available.

  Acer technical support are now run out of ideas. Does anyone have any suggestions?

  I found the answer...

  "" in the start menu > msconfig > boot > advanced > make sure number of cores is 2 you have a dual core processor ' "

  I don't know if it was a simple thing that it was assumed that I already knew that, but I didn't and now I do, and I 7.74 GB of memory can be used.

  Thanks for all the help.