Upgrade of Windows 10 - error 0xc7700112 Wizard

Similar Questions

• XPS 13 (9343) - unable to upgrade to Windows 10 - error 0xC1900101 0 x 30018

  I have a brand new 13 XPS, 9343 model with i7 processor and 512 GB SSD. I'm still within the period of 14 days, and I'm now seriously returning. I've never known such a load of nonsense trying to install any other piece of software.

  So far, and after many attempts, I was completely unable to upgrade to Windows 10. The first thing I did was to install all the Windows updates available for 8.1 (there were 79 of them), and immediately after that I started the saga to install Win10. Nothing else has been done to the laptop - no questionable software or USB devices (except the USB boot if necessary). It is in a State of cleanliness.

  -After the download via Windows Update, the installation procedure is INCREDIBLY slow (for example, it takes 36 HOURS to reach 42% completion - and at this point, it hits the error message). What the heck can he do?

  -J' also tried to create a bootable USB drive via the media creation tool. If I boot from the USB key and perform a "clean" installation, it works perfectly: it takes about 8 minutes total (which highlights how ridiculous the 36 hours). However, because it is a clean installation and not an 'upgrade', I find myself with a non-activated version of Windows 10 and I am asked to pay £99.99, I don't intend to do. I paid for the laptop on the understanding, he would get a FREE upgrade to Win10!

  -J' also tried using the USB key (but not the start of it) to perform the upgrade in place - this strikes the same mistake as Windows Update (and taking so long)

  -J' tried to uninstall all antivirus software, and disable all wireless/bluetooth devices before performing the upgrade - nothing of this aid. Because need me 36 HOURS per attempt, it is really not acceptable to try disabling things randomly in the vain hope that it might work correctly.

  When trying to upgrade (i.e. not), I hit an error message "Windows Setup cannot set up Windows on your hardware" or similar. During the recovery after the failure, tool configuration gives the 0xC1900101 error code 0 x 30018 and says it failed in operation 'FIRST_BOOT', the phase SYSPREP. Just make this error message cost me 36 hours of waiting (welcome to the future!), then it would be really helpful if someone could give me a definitive answer on what makes...

  Help, please! Auuughhh

  Hello world

  If you are affected by the issue in which your XPS 13 is not upgraded to Windows 10 and he is stuck or take several hours, PM me with your serial number.

  Thank you

• Upgrade to Windows 10 Error 80070002

  When you upgrade, it stops with code 80070002, any ideas? Windows 7

  Assuming that the Win7 computer is already fully-patched and you attempt to update through Windows Update, start here: http://windows.microsoft.com/en-us/windows/windows-update-error-80070002

• Envy 17-k270: upgrade of Windows 10 - error c1900101-30018

  Hello

  I tried upgrading my laptop for Windows 10 several times and I get the following error message: c1900101-30018 and FIRST_BOOT SYSPREP. I tried to update through windows update and through the USB with no success so far. My last option will be to do a clean install of windows 10. I wonder if I will come through the same mistake by doing this.

  Has anyone done a windows upgrade installation clean 10? Has anyone found a solution or workaround above?

  Any help is very appreciated!

  Thank you

  I'm from Mexico, I had the same error code.

  Solved it by uninstalling tune up utilities and antivirus, update now Windows 10 without problem, using the official application "media creation tool" from microsoft to install via USB, now Windows 10 is running and active

  http://www.Microsoft.com/en-us/software-download/Windows10

• can not down load upgrade to windows without error pg 10

  went I download W10 on my windows 7, it won't let me connect to the internet, just get a cannot open this page.   What I am doing wrong?

  What type of Internet connection you are on, wired or wireless? If you are on a wireless connection, try switching to a wired connection and try the download.

  Click Start, type: cmd

  Right-click on cmd, and then click Run as administrator

  At the command prompt, type the following:

  ipconfig/release

  then

  ipconfig/renew

  then

  ipconfig/flushdns

  leave the command prompt

  Click Start, type: folder

  Press enter

  Delete the contents of the temp folder

  Restart the computer and try to download again.

  If the problem persists, try resetting your router if you are connected to one.

  Turn off the router, unplug it, wait 10 minutes

  Plug it in again, power up once again

  Reconnect the Ethernet cable

  Try to download again

  If the problem persists, try uninstalling Internet Explorer 10:

  How to Remove Internet Explorer from Windows as a...

• OfficeJet 6700: upgrade after Windows 10 - locked by admin password

  After the upgrade to Windows 10 all functions under "Settings" are locked and the error indicates "this function has been locked by your system administrator or the person setting up the printer" I have never implemented or locked these functions. I understand that it is a known HP printer after upgrade to Windows 10 error. Restoring default values does not either because the feature is locked. I need to fix this or get a new printer from another provider, thanks.

  Hi @VIKING00,

  I can honestly say I have not heard this before going on as a result of any upgrade, but that being said, I've heard of the error, "this function has been locked by your system administrator or the person setting up the printer" and I am confident, I can help you.

  rather than restoring to factory settings, I would like to reset the printer completely. I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Printer resets: What You Should Know by @Bob_Headrick

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

  Please return to this forum thread to let me know if this reset solves the problem, as I expect it. Thank you.

• Upgrade from Windows 7 to windows 8

  Hi all

  I bought a Toshiba laptop with windows 7 installed and when windows 8 came out I have upgraded to windows 8, error biggggg dislikes the configuration of it, can someone tell me if I go back to the factory settings on this laptop will be deleted windows 8 and windows 7 will be always available.

  Upgrade of Windows 8 should leave the intact recovery Partition.

  New computers that come pre-installed with Windows often have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Toshiba, press and hold "0" BEFORE and during the power upward

  If the recovery partition is not functional, ask Toshiba recovery media:

  Toshiba

  https://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/serviceUnitVerification.jsp?orderType=SFF

  1-800-457-7777

• 80070652 error code when you try to upgrade to windows 10 Windows 7.

  * Original title: windows update error code

  80070652 error code when you try to upgrade to windows 10 Windows 7

  0 x 80070652

  ERROR_INSTALL_ALREADY_RUNNING ErrorClientUpdateInProgress

  If the upgrade process sticks or does not respond to 99%, it is better to wait and do nothing for 5 to 6 hours. If there is still no progress to close the Wizard Windows 10 upgrade, restart the computer and try to upgrade following the tips detailed below.

  You are using an ethernet cable or wireless to connect your computer to the router? Wired ethernet is faster and more reliable for large downloads. An ethernet cable is a low-cost purchase.

  Connect to a power supply, if your computer is a portable computer.

  Disable your anti-virus software so that the upgrade.

  I suggest you to download the tool for creating Windows Media 10 ISO and make a place in upgrade.

  Download the update of Windows Media Player 10 tool creation build 10586:
  http://www.Microsoft.com/en-us/software-download/Windows10

  How to download an ISO using media tool:
  http://www.tenforums.com/tutorials/9230-Windows-10-ISO-download.html

  How to make a upgrade in Place using method 1:
  http://www.tenforums.com/tutorials/16397-repair-install-Windows-10-place-upgrade.html#step6

  If this does not work please provide more information for your issue to be diagnosed.

  Restart your computer and wait 20 minutes for the system to operate before you download information. When the review much, not Event Viewer log files all problems show in the period immediately after the computer has booted.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. If the report is in one language other than English, please indicate the language.

  Please download and share with everyone a new copy of your log System of your event viewer on your disc one and post a link here. It allows to avoid confusion if you delete all previous copies of the log files of your OneDrive.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:

  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Wizard upgrade said platform not supported on the upgrade of windows 8 on xp pro 32 market sp 3

  Hi all, it drives me crazy.

  A month ago I went to install the upgrade of windows 8 on my current xp pro, at that time, put assistant level said no problem, I downloaded (and paid) the upgrade and then everything went to hell.  I ended up having to clean my original xp install to get the computer back in working order.
  Now, I decided to try again with the update (using the same product key, I tried to install with last month) so I went back to my email, write down the product key and click the link to download it again, but this time he wont even let me try.  As soon as the implementation or the Upgrade Wizard works, I immediately the message that "this platform is not supported" and that's what I get.
  As I said, I'm running a clean version of Windows XP Pro 32 with SP 3.  Any advice would be most appreciated.  Thank you very much.

  I just checked the BIOS settings and the XD card was already activated.

  The first time I started the upgrade wizard, which told me that I could indeed be upgraded, then I downloaded the upgrade and installed it.  I had some problems with the download, but nothing that was not easy to fix (I honestly don't remember exactly what the problem was).  Once the installation was apparent complete, I rebooted the computer when you are prompted and I got an error message that the installation has failed and then told me that the computer would come back on my original os.  After a few moments, I received a message that the computer failed to return to the operating system, and the computer restarted and gave me the option to boot windows 8 or windows xp.  I have tried both and neither is feasible.  After trying both, I got a new screen that says my computer need of repair.  I then re installed xp, clean boot from the floppy disk to return back at the beginning and have a computer working again. After all that, I reinstalled all the necessary updates and realized when I tried the original installation, I did turn sp2, but not sp 3 so this time I made sure to get that taken care of first.  And now, well you know where I am now!
  Thank you
  INVI.

• Satellite P50 - B - internal error power after upgrade to Windows 10

  After the upgrade to Windows 10 and after reboot, I got Internal_Power_Error and laptop restarts automatically.
  After signing, get the same error of internal power and the repetitions of the process.

  I contacted Toshiba Support and they did NOT have a fix for this problem.

  The power driver should be updated but no ETA on when the fix will be available.

  Be wary.

  This does not resemble Toshiba problem. The issue (error message) appears due to AMD graphics card driver compatibility issue.
  This seems to be a problem with all computers with a particular AMD GPU.

  Probably the 10 Windows take the old driver (catalyst process) is not fully compatible and the solution could be:
  -graphics card ATI catalyst unisntall
  -updated the driver... (try to download the drivers Win10 for AMD driver AMD site)

  You should be able to update the drivers for the GPU in right click Device Manager the GPU.

  In case the 10 Windows will not find an AMD update, it must simply wait and use the internal Intel GPU that is part of the CPU. This occurs after the AMD/ATI driver has been uninstalled.

• Activation error: 0xC004C003 after upgrade to Windows 10 8.1

  Last September, I bought this computer, it is Toshiba Satellite L50-A-19N, he was originally Windows 8, I've updated for Windows 8.1 and it enabled all the time until the upgrade of Windows 10, now it shows "error code: 0xC004C003" which means that the key is not valid.
  "Connect to the internet to activate windows.

  

  Change product key button does not work, the settings window just freezes and I have to close it using the Manager tasks.

  I found the original key using this script, it's quite different key that is displayed in settings > Privacy page
  http://pastebin.com/THmGQcgk
  

  Running this command

  slmgr-IPK MY47H deleted

  This appears when I try to activate using the original key, at least I think it is original because I got using this vbs script

  Activation of Windows (r), Core edition (2b1f36bb-deleted)...
  Error: 0xC004C003 the activation server determined that the specified product key is blocked

  I read that I can somehow contact toshiba or microsoft for the original for my product key, but I can't find any info contact, or live chat, only in this forum, so I ask here

  Microsoft was told to contact TOSHIBA... How can I contact TOSHIBA for the original key? I have the original key, but I want to be sure if that is true.

• HP Envy 15-K204NA: upgrade to Windows 10 has failed with error 80070714. Help, please!

  Hello.

  I hope there, can someone help me!

  I tried several times to improve my HP Envy 15-K204NA for 64-bit Windows of 8.1 to 10 Windows Home, but she continues to fail with the error code 80070714.

  I use Protection Premium Bullguard and Acronis True Image installed.

  I disabled the SQL services as suggested by other posts on the internet, but nothing seems to work.

  When I run the upgrade from a DVD burned ISO, it gets 37% and fails.

  Hope you can help. (fingers crossed!)

  Chris

  The Setup error log file shows:

  2015-08-05 16:48:34, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:37, error CallPidGenX: PidGenX function failed on this product key. (hr = 0x8a010001)
  2015-08-05 16:48:49, error CONX failed to initialize the data of net class 80070005

  2015-08-05 16:48:50, CONX error could not get data from the printer class 80070057

  2015-08-05 16:49:21, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:21, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:21, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [tib_mounter.x64.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [tib_mounter.x64.inf]

  2015-08-05 16:49:23, CONX error could not open the INF [oem46.inf] with 0 x 80070002

  2015-08-05 16:49:23, CONX error cannot initialize the driver package [oem46.inf]

  2015-08-05 17:06:14, error MS RegLoadKeyW failed to mount C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM to SP_HIVE_LOAD_ALIAS_SYSTEM [gle = 0x801f0005]
  2015-08-05 17:06:14, SP SPMountOfflineHive error: cannot mount the hive offline: C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS\system32\config\SYSTEM. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, SP CEnableTelemetryForImage error:oExecute: cannot load the hive of the system for the C:\$WINDOWS.~BT\Sources\SafeOS\SafeOS.Mount\WINDOWS OS offline. Error: 0x801F0005 [gle = 0x801f0005]
  2015-08-05 17:06:14, error [SetupHost.exe] ReAgentXMLParser:arseConfigFile (xml file: C:\$WINDOWS.~BT\Sources\SafeOS\ReAgent.xml) return 0 x 2
  2015-08-05 17:06:19, error MS by using the current time as a Timestamp of recovery.
  2015-08-05 17:06:22, error MS cannot open session DISM WinPE. Error: 0 x 80070714 [gle = 0x0000007a]
  2015-08-05 17:06:22, MS operation failed error: drivers of Migration process. Error: 0 x 80070714 [gle = 0x000000b7]
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: ExecuteCurrentOperations reported failure!
  2015-08-05 17:06:22, MOUPG MoSetupPlatform error: using the action error code: [0 x 80070714]
  2015-08-05 17:06:22, CDlpActionDriverMigrate::ExecuteRoutine (544) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, error MOUPG CDlpActionImpl < < < < class IMoSetupDlpAction > CUnknownImpl > CDlpObjectInternalImpl > CDlpErrorImpl > class class class: Execute (441): result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteAction (3243) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::ExecuteActions (3397) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CDlpTask::Execute (1631) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1953) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteTask (1916) MOUPG error: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteInstallMode (736) error MOUPG: result = 0 x 80070714
  2015-08-05 17:06:24, CSetupManager::ExecuteDownlevelMode (376) MOUPG error: result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupManager::Execute (222): result = 0 x 80070714
  2015-08-05 17:07:09, error MOUPG CSetupHost::Execute (370): result = 0 x 80070714
  2015-08-05 17:07:12, CDlpManager::AsyncSerializeDisable (471) MOUPG error: result = 0 x 80070216

  I have now abandoned and rebuilt my laptop using the recovery partition.  The upgrade to Windows 10 came immediately, and it installed fine.

  Hooray

• Satellite A500 - upgrade from Vista to Windows 7 error

  I'm moving my Vista Home Premium to Windows 7 Home Premium via the Assistance of Toshiba upgrade so it will automatically download the software and some Toshiba Utilities. At the beginning of the launch, an error message 'this model does not support upgrading to Windows 7' in step 'Download Window 7 List component' and cannot continue. I'm confused because this as the disk to upgrade to Win7 I bought and received earlier this year from Toshiba Web site. I have a Satellite A500 I bought last year. It is not an old model, and I think that it is able to upgrade to Windows 7.

  I managed to do a clean install once a while back but realized things of the Toshiba didn't were there not more then I got it back it back to Vista (but instead of the first 32 bit, I have changed there 64 bit). So now, he's running on a Vista 64-bit.

  I don't know if changing from 32 bit to 64 bit has nothing to do with him or if there is something I need to install before you upgrade... I followed the steps on the Toshiba site to upgrade but stuck at this step. I'm not good with computers so help would be greatly appreciated and thanks in advance.

  I created a few interesting, official items of Toshiba directly about Windows 7 update procedure:

  http://APS2.toshiba-tro.de/KB0/TSB9902P60000R01.htm
  http://APS2.toshiba-tro.de/KB0/TSB9A02PE0000R01.htm

• upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  upgrade to windows 10, cannot open itunes, it opened the first time, and imported all my songs, but does not open a second time, get the error that the path is not correct and file not found

  Try to repair the security permissions for iTunes for Windows and the empty/corrupted after upgrade/crash iTunes library.

  TT2

• HP Pavilion Notebook 15-p050ca: graphics driver error message started after the upgrade of Windows 10 model installed on #: G6U13UA #ABL

  I have recently upgraded to Windows 10 and since then, I received the following message through a game: "display Intel HD Graphics driver Driver for Windows 8 (R) stopped responding and has successfully recovered."

  I checked my graphics driver and it says that it is up-to-date.  I tried installing the latest drivers for my laptop model (according to the HP drivers page), December 15, 2015, installed without a problem, but no version has not fixed the problem.  An error message appears when I try to install the March and April, 2016 versions of graphics drivers, claiming that they are not compatible with my computer.

  I also tried the Intel and HP driver update utility and told me that my drivers are up to date.  However, when I look at the properties of my Intel(r) HD Graphics Family in Device Manager, I noticed that information on the events tab says: "peripheral PCI VEN_8086 & DEV_0A16 & SUBSYS_227E103C & REV_0B\3 & 11583659 & 1 & 10 still requires the installation."

  I don't know what needs update on my computer or if this driver is incompatible with Windows 10 and there is not yet an upgrade?  Advice or opinions would be appreciated!

  My computer model is the 15-p050ca HP Pavilion Notebook PC (ENERGY STAR) model #: G6U13UA #ABL and the graphics driver is version #: 10.18.15.4279

  I went back to 8.1 for Windows and ran the store several times and then reinstalled Windows 10.

  I watched the graphic version installed and version 20.19.15.4331 dated dated 18 November 2015, but he still claimed there was an update of the graphics driver.  I tried the update and it was version 10.18.15.4279 dated August 2015, which was the same version that was installed when I had problems (and the same version on the HP website), then I went back to the 20.19.15.4331 version.

  I tried all the graphics drivers listed for my computer on the HP support page and again, I had the same problems with them as I had before (either claim that my computer has no minimum requirements or my graphics driver crashing).

  With the current version (20.19.15.4331), my graphics driver has stopped at least for now crashing, but I assume that this is not a specific driver HP and is only based Intel?  If so, I recommend HP glance on the issue, I've had if they claim that these drivers are supposed to work for my computer when my computer is, in fact, not accept them.