Upgrade to webOS 3.4.0.77 on TouchPad

Similar Questions

• Upgrade to webOS 1.0.2

  My Pre came pre-installed with webOS version 1.0.1 and chances are that is your responsibility. Here's a quick guide to make upgrades to 1.0.2!

  1. Click the Launcher
  2. Return on the 3rd or last page
  3. Strike updates
  4. Let the search for updates
  5. Download the update (time to download different depending on your 3 g signal or wifi connectivity)
  6. Install the update (it will take about 10 minutes)
  7. Fact!

  Which is updated? I'm not quite sure. Read something about Sudoku and clock radio apps

  While this works, I have another list of possible solutions, that should work (listed from simplest to most complex):

  1. close and reopen the application of updates.  Wait 60 seconds and try again.

  2. launch the application of device information and click Reset the Options.  Then click on restart.  Once the phone has been restarted, try again.

  3. at this point, restored as close to "out of the box" you can is suggested.  Restart Device Info, click Reset the Options, and then click clear partial.  FYI, this deletes everything from the files EXCEPT device placed on the device via USB Mode (the last option, Full erase this and takes MUCH longer).   Then try again updates.

  If all goes well, one of the above will work, you will be updated to the latest version (1.0.2, so far!) of webOS.

  Oh and look here for info on the restoring information after an update: http://kb.palm.com/wps/portal/kb/common/article/44827_en.html

  Message edited by PDAGuy 06/11/2009 13:46

• Another App Catalog problem, since the upgrade to webOS 1.4.1.1

  Since I've updated webOS, I have unsuccessfully to download something from the App Catalog.  If I try to download a free application, or the one and only app that I paid for (which is saying I can download it for free, given that my credit card has already been charged), I get the same result.

  After I clicked "Download", the "Download" bar... "appears at the bottom of the screen.  And then he left just like that until I give up and click on the "App Catalog" drop-down list, then "Pause all downloads" and then "remove paused downloads.

  Does anyone have any suggestions?

  Genius is recommend at this time to resolve this issue, customers should do a partial deletion (delete Apps & data).  For more information on the conduct of this deletion, see restarting and resetting your phone in our support knowlegebase.

  Your backup of your Palm profile should restore all your purchased applications and contact information (if you are synergy with Google, Yahoo, etc. that if she didn't is not manually add these accounts is, data will be restored as well;). See using backup for a list of what is and is not backed up and restored on your phone.

  If there is anyone who IS NOT solve this problem, we need to look more closely at your phone.  However from what we have seen this solution should work for most who have this problem.

  I was also asked if anyone seeing that this problem has got their phone hang on to the point where they removed their battery to solve, if so please let us know.

• Can not get "All inboxes" folder appears in the Email after WebOS 1.1 upgrade

  After the upgrade to WebOS 1.1 I see is no longer the Smart folder "All inboxes" in the email.  I prefer smart folder in position 'On '.  I tried to put on & off without success.

  Well, all of a sudden that he showed up... guess it took a few hours to do everything thing to do.

• Qosmio F50 - FN keys does not work after Windows 7 upgrade

  Hello

  After installing Windows 7 my 'FN' key doesn't work anymore. The big problem is the upgrade to Windows 7, I turned off my touchpad using "FN + F9". Now that my FN key work and I cannot turn my touchpad.

  Is there a way to reverse without using the "fn"? And is there a way I can fix my FN key? Accessible from start > all programs > Toshiba > utilities > accessibility does not work. Is somehow connected? What can I do?

  Feedback and assistance is greatly appreciated.

  Hello

  Here's a similar thread on the Qosmio F50 with Windows 7 issue where the don t FN keys work:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=184578𭄂

  If you must install the package of added value and utility to Support Flash Cards, but you must choose a version that is available for Windows 7.

• IdeaPad Z580 trouble with smart touchpad after upgrade of Windows 8

  I own a Z580 Ideapad and upgraded to Windows 8 yesterday. I noticed that the smart touchpad stopped working after the upgrade. I installed the correct driver, Synaptics Touchpad Driver for Microsoft Windows 8 (32-bit, 64-bit) - IdeaPad Z380/Z480/Z580, hoping that it would work, but nothing helped. I also tried to reinstall/overwrite my existing 64-bit driver when prompted by my system to do so.

  Scrolling, pinch and side scrolling don't work at all. It is quite frustrating. Help, please.

  Hey guys lenovo recommends a clean install of windows on machines pad idea 8

  read this:

  http://download.Lenovo.com/Lenovo/content/Windows8/upgrade/IdeaPad/index_en.html

  And can get all the drivers for lenovo China site... use chrome to translate the page

  http://Support1.Lenovo.com.CN/Lenovo/WSI/modules/DriverDownload.aspx?SearchType=1&LogicType=0&Machin...

• Split x Touchpad 2-problem after upgrade to 8.1 Windows

  Hello

  I bought this Split x 2 a week ago and it came with WIndows 8. Everything worked great until I upgraded to WIndows 8.1. Now my Touchpad freezes a few times and I have to sign out and then sign back in to my profile to unlock the touchpad sometimes I can get it to unlock by resetting the version touch screen buttom.

  I called HP customer service and they said it was a matter of Microsoft and transfer me to them. Microsoft said that it was a hardware issue (HP) and that I had to return to the store where I bought it.
  (BestBuy). I took it yesterday at BestBuy and they gave me a knew one. I did the same thing and upgraded to Windows 8.1 and questions of touchpad is back. So fairly sure is not a hardware problem.

  All windows updates are completed

  I checked the Touchpad Driver and it is up-to-date.

  NOTE: I plugged a wireless mouse for my laptop and when the touchpad freezes wireless mouse still works.

  Does anyone know a fix for this problem? Everything else works fine on the laptop is just very annoying when you work and you need to close the session to get your touchpat to work again.

  Any help would appreaciate it.

  Jhon C

  It worked for me.

  Go to the Generic USB (two of them) hub in Device Manager.

  Go to the power management tab

  Uncheck the box allowing the computer to turn off this device to save power.

  Turn it back on.

  My touchpad stopped everything by searching for a solution on this forum. I have 'unchecked' boxes and the touchpad are property to life before the reboot. He has worked since then. (three days)

• Lost Screenlock pine (Webos doc has failed)

  I have not used my touchpad for mths... yesterday, after I take took my touchpad fees it and try to use my touchpad, I discovered that I don't remember the PIN to the lockscreen.

  I went online and google for help and found something called WebOS Doctor. But I m cannot be used, the webos doctor can't detect my touchpad when I connect it to my office. (maybe because it to connect to my office in charge mode)

  I tried to reboot or shutdown my touchpad using the power button, but failed too. I saw a menu to stop but the screen lock me disable to select one of the options...

  I need serious help here... I have to empty my touchpad to helpless until I can fix this?

  Oh dear.  WebOS Doctor says that it has been disconnected?

  No doubt ty to return yout TouchPad in USB mode and try again webOS Doctor.  Sometimes it just fails.  WebOS Doctor failed once on my TouchPad, so I tried again and it went smoothly.  Who knows why...

  That's what I found about the webOS Doctor curtain at 8%: http://www.webos-internals.org/wiki/How_To_Recover#Doctor_disconnects_at_8.25

• BUGS: Pre calendar treats Saturday 1st title of 2nd Saturday, brings also 3rd Saturday as BYMONTHDAY = 21 (but the migration is apparently not)

  After having closed the thread of questions related to migration of DTA, I discovered a new failure in the Pre calendar application.  It's using DTA 1.1 and WebOS 1.1, only syncing my Palm profile.  The next of VCALENDAR record is in my migration.mig file (I changed the incorrect initial INTERVAL 1 interval = 12 =):

  BEGIN:VCALENDARVERSION:2.0PRODID:Nova-MigrationBEGIN:VEVENTUID:818CATEGORIES:UnfiledCLASS:PUBLICSUMMARY:Woodward Dream CruiseDTSTART:20040821BEGIN:VALARMACTION:DISPLAYTRIGGER:-PT7200MDESCRIPTION:Woodward Dream CruiseEND:VALARMRRULE:FREQ=MONTHLY;INTERVAL=12;BYDAY=3SAEND:VEVENTEND:VCALENDAR
  

  In this case, the initial event occurs on 21/08/2004, which is the 3rd Saturday in August.  Note that August 2004 starts on a Sunday, which I think is German for this particular failure.  This means that Saturday, August 7 is the 1st Saturday in August, not the 2nd.

  The migration process initially placed the repetitive event on the thing to the day in 2009, namely, Saturday, August 15, which is the 3rd Saturday.

  However, I don't have a five-day-advance alarm today (Monday, 10 August 2009) on my pre (but I had one on my Treo 700 p, which has all my old data calendar loaded on him), so I went to the event on Saturday, 15 August 2009 (where the migration process had placed) and opened it to inspect it.

  First of all, I noticed that there are a set of alarm for five days in advance, so I opened the property repeat monthly custom and found that it was set to 'Every month on the 21st [sic]', 'Every 12 months', ' repeat until that Forever. "  It was clearly wrong and does not match the date at which the migration process had placed the event for 2009 (Saturday, August 15, the 3rd Saturday in August 2009).

  Even stranger, when I slipped back monthly custom property page repeat (why is there not a Cancel option to get out of these pages without modification?) he must have accepted the 'change' of ' monthly on 21st [translation] "because the event disappeared from where the migration process had placed (August 15, 2009), and it showed on August 21, 2009 , instead.

  At this point, I thought that I could access the event initial (21 August 2004) and change the 'monthly on 21st [sic]""monthly on the 3rd Saturday.  That's when I discovered the 2nd (probably related) bug: were the only options available in the event of 'head ':

  "Daily".

  "Weekly".

  "Every month on the 21st [sic]" (enabled)

  'Every month on the 4th Saturday' (!)

  "Each year the [translation] 21 August [sic]" (geez, it would be really hard to be grammatically correct, you think?)

  So, I reached a dead end.  Saturday, August 21, 2004 is clearly not the 4th Saturday, but apparently the Pre calendar program does not know that (again)!

  In summary, I documented two bugs:

  (1) the "RRULE:FREQ = MONTHLY; RANGE = 12; BYDAY = 3SA"clause contained in the migration.mig file has been munged (it's a term of scientific programming)"every month on the 21st [sic]. "  I don't know if this has been done by the migration process, but it seems unlikely, because the migration process apparently placed the original recurring events on the appropriate dates.  Only after opening one of these events and inspect the property to repeat monthly custom (and getting caught by the Pre Calenar 'feature' of not being able to leave inspecting the property without modifications) made the event move to 21 of every August, as indicated by the property of repeat incorrect on the monthly of custom.

  (2) for an event that starts on Saturday, where the month starts on a Sunday, the timing of the front (but apparently not the migration process) is a 'one stop' error and suppose Saturday, March 1st (7) is the 2nd Saturday, and so on.  In the particular case of August 2004, Saturday will eventually be numbered 2 to 5.  I don't know if this is repeated with other days of the week, or what might happen if a particular month ends with the 2nd to 6th (!) a few days of the week to manage.

  Anachronistic, PDAGuy, can we bring this to the attention of the Palm development team, please?

  Thank you.

  After the upgrade to WebOS 1.20, these issues seem to be resolved.  I could go to the entrance of the 'head' and correctly choose the 3rd Saturday in August, every 12 months, and it now appears the correct days in the following years.

• Win 7 / T500: no driver for Serial Port PCI

  I have what I think it's all Lenovo installed software after an upgrade to Windows 7. This includes the touchpad and Intel AMT drivers. However, I show still no drivers for "PCI Serial Port" in my device manager.

  No idea how to solve this problem of exceptional pilot?

  Thank you!

  _Bruce_

  The manufacturer is Intel and here is the link for the driver you need:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-73567

  I think that you just install this driver in case you have Intel AMT active. If Intel AMT is disabled I do not think that this device will be shown in Windows.

• Cannot adjust the brightness of the screen after the new installation of Windows 7

  I have a Pavilion dv2945se notebook. I have completely updated the Nvidia geforce 7150 m drivers. My laptop came with Windows Vista Home Premium 64-bit, and I did a new install of Windows 7 Home Premium 64-bit. I can't adjust the brightness of the display. I narrowed down the problem to the generic PnP Monitor driver. How can I solve this problem?

  Edit: I mean "impossible to adjust the brightness of the display" that every time I go into power options and trying to use the cursor, Windows Explorer crashes. Also, my fn + F7 and F8 keys light work before I connect to windows, but not after. I think that something will charge when I connect to windows that is causing the problem. So I went in Mode safe, but then all that allows to control the brightness has not loaded when I went into safe mode, which was not helpful. I also went into MSConfig and disabled all startup programs, but again, I have the same problem. The brightness of the keys work before connect you to Windows, but not thereafter.

  When I turn off the device generic PnP monitor (1) can't adjust the brightness at all and (2) the Power Options window stops freezing. That's how I've narrowed the problem to the generic PnP Monitor driver.

  I finally solved this by uninstalling the driver for the ALPS touchpad. Because there are no Windows 7 drivers for my laptop even though it is listed in the models capable of upgrading to Windows 7, I used Windows Vista touchpad drivers. It was the cause of my problem with brightness adjustment. I don't know why it worked, but I've narrowed it down by disabling all processes start and then from their one at a time to see what caused the problem. As soon as I started Apoint.exe, I started to have problems.

  Now, I just have to find a way to disable the touchpad tapping without the ALPS drivers.

• XPS M1530 Touchpad won´t work Win8

  Since my upgrade to Win 7 64 bit for Win8 touchpad didn t work. Tested the Alps and synaptics driver. But the two works of dind´t. need help! (Hardware ID is called as ACPI\PNP0F13\\4 & 1923AA7D & 0)

  THX Simon

  Managed to do work! He located a driver problem. It seems that win8 installing the touchpad has been disabled in bios. Problem: it is useless in the bios to aktivate / deaktivate the touchpad. As nothing worked and I almost wanted to reinstall win7 I had a strange idea: reinstall the bios of the A12 to A12 and guess what! Tocuhpad now works perfektly with ALPS driver found here in the Forum. Bad ass.

• Email - The sound Notification of new messages.

  Does anyone know if webOS makes a sound when you receive an email? I have all my sound prefs on but if an email arrives and my camera is not on I need to rely on my Smartphone to tell me that it happened.

  Anyone know if you can get webOS for this?

  The TouchPad can warn you when it receives an email (even if the screen is off).  Check the preferences for each e-mail account, you have put in place and ensure that they are not set to "Mute".

  Set up e-mail sounds are on page 56 in TouchPad User Guide

  There have been a few reports users lose all the sounds due to a bug, but a restart of the device returns things to normal.

  WyreNut

• InDesign CC Mac OS Sierra context Menus

  Hello, since the upgrade to Mac OS Sierra and uses a MacBook Pro, the list of shades of color in InDesign CC is no longer scrolls correctly.

  Before the upgrade, I could use two fingers on the touchpad to scroll through the colors. Now, I can only scroll from the bottom up with more action. Subtle scrolling is no longer possible, except if you click and hold down the scroll button. Wasn't sure where else to post this.

  * Update, two fingers to scroll works perfectly when you move the scroll bar. It is highly intermittent so maintained on the list of samples real himself. It worked normally before moving on to the Sierra.

  Hi M8,

  As stated above by experts, Sierra has not yet released officially by Apple and it is too early to pronounce on it. I'm sure that our engineers are working and test applications on the new OS. Please wait for an official announcement.

  Kind regards

  OM

• (Pixie palm) Try to update webOS 1.3.5.1 (unpacking...)

  Miss me the CLOCK of my new Pixie of Palm app. Reading that I need to move to the 1.3.5.1 webOS.  I clicked on the 'Upgrade' and says it is downloading... sitting there forever.  I finally gave up and turned the phone off and on again.  Now when I go to 'Upgrade' it says "Unpacking" and never does anything more than that.

  I'm doing something wrong?  I am in desperate need of the CLOCK (wake up) app.  Thought it was a mistake on this phone because I had it on my razor phone stupid before changing for this one.

  OK, exceeded the update problem (guess you must have a full battery to get download and install it.)

  But still no CLOCK app he shows in my list of applications software, but not as an icon on my Launcher.

  Also, not that I'm 1.3.5.1, when I go to the app catalog, I get the large yellow triangle that says: "this action was not successful. Try again later. »... I have internet connectivity, so not sure what is the problem.