Upgrade Vista to Windows 8 Pro. Black screen on reboot.

Similar Questions

• Windows 7 Pro black screen with cursor on all modes and no login screen

  OK so basically, it's how, my laptop decided to me-screw right when I need to make some adjustments to my final project for next week.

  Friday he started very well in class and at the end of the course at 6:30, I stopped him. I normally don't that often stopped because I usually find myself opening upward in an hour later. But I did this time and when I got home and turned on around 9:00, it started like this:

  Screen Compaq PhoenixBIOS > Windows boot animation > black screen with cursor mobile, no login screen

  No screen connection. No sound. Not nothing but a black screen and the cursor movement. So I force shutdown and turned it back, this time he asked a chkdsk and I ran it. A ton of stuff file unreadable came and it took all night to run through it all. Tried to start again and Windows Error Recovery came and I tried all Modes of security and start normally and all produce the same black screen and the cursor with no login screen.

  Then I used my Windows 7 dvd repair to try and system restore to a week before. That's where I noticed that windows had installed a critical update at 12:00 on Friday. Tried to restore before that, but he failed. Gave me an error 0 x 80070057 and said I should run chkdsk /r and then try again. Then I used the cmd prompt through dvd repair and he has seen all these things wrong file again once recovered things then realized hours later. Tried to restore the system again. Still the same error. A run chkdsk again through the cmd prompt, then he went to clean without errors or orphaned files or anything, but it took a lot of time. I used the Startup Repair, and he has not found anything wrong either. But still the same error the system restore.

  So I looked around online for the last two days, trying to figure out and that someone said to try CTRL + Alt + Delete, the sticky shift key thing. So I tried to boot the system again, same black screen with cursor movement. I did CTRL + Alt + Delete, nothing. Press and hold the SHIFT key, and a pop-up window asked FilterKeys. Press the SHIFT key 5 times, a popup asked about sticky keys. But that's all I can get it to do. Nothing else. I tried to boot into safe mode with F8, chose, each of them and that changes in screen resolution and the words "safe mode" in all the corners of the screen. If the repair dvd's while I start in safe mode, it will open as well in safe mode, but with the same black background mode. Tried running sfc/scannow through repair invites cmd of the dvd and it says a system repair is pending and he had to restart, and then run the sfc/scannow. Tried, but it doesn't do anything when I restart except go to Windows Error Recovery asking either start in any safe mode or normally. And then it's just black screen again.

  So I am at a complete loss what to do now. After all of this mess, it seems that this Windows Update Friday afternoon did something and when I booted it upward once again, his cause nothing but problems. I think it has something to do with the display and the graphics card drivers? It's as if the thing starts but I do not see anything either because the sticky keys appears, but sees nothing else, no matter what I do. Seriously, I don't want to this junk because this is a new hard drive and I was just able to retrieve my files from my old hard drive that had epic failures as well. And I just got this new specifications I wanted as well.

  Laptop Spec:

  Compaq CQ50-115nr
  OS: Windows 7 Professional
  HARD drive: Western Digital Scorpio Blue 320 GB SATA WD3200BEVT
  Processor: AMD Turion X 2 RM-70
  Graphics card: NVIDIA GeForce 8200 M G
  Memory: 3 GB RAM

  If someone could seriously help me I would be VERY happy.

  Hello

  This isn't good news.

  --------------------

  STOP: 0XC000021A

  Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
  (not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

  Cause

  This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

  Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

  Solve the problem

  Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

  Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

  If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

  Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

  Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

  STOP: 0XC000021A<-- read="" this="">
  * 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

  -----------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
  above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not try to repair it, you can borrow a friends because they are not protected against copying. You can also buy the physical disks
  good system machine cheap that you already own Windows (you have to reinstall them if)
  required). You can also repair disks on another computer.

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  Displays information on all the "crash" of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Upgrade a real Vista to Windows 8 pro using a windows 8 pro upgrade product key

  Original title: Ted-Edwards

  I want a real Vista to Windows 8 pro using a windows 8 pro update product key on a special offer from Microsoft by Arvato distribution GmbH (a distributor of Microsoft in Germany) but need an installation disc.

  Initially, I did this upgrade successfully but my installation of Windows 8 disk become corrupted.

  My goal is to build a new system of games for Windows 10 because the current does not have a couple of years and I replaced it with a laptop.

  Where can I get one please?

  If you have your product key, you will find the instruments here:

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-product-key-only

• Satellite Pro L300D - upgrade Vista do Windows 7

  Hello

  I'm trying to upgrade Vista to windows 7. After running the Advisor Windows 7 it tells me to uninstall and reinstall ATI Catalyst install Manager and Catalyst control center Branding.
  I'm ok with the uninstall but need help on how to do the reinstall.

  Could someone give me some advice please?
  Thank you.

  HH

  Hey,.

  This means that you are looking for a new display driver for Windows 7, right?

  Well, normally as you can get on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & download > download drivers

  I checked the Web from Toshiba site and there is a display driver for your model. Windows 7 32-bit and 64-bit, both are supported and it s version 8.634.1

  It is useful for you?

• Windows Vista does start with a black screen no mouse pointer.

  When I try to load vista is going just a black screen... the little green bar moves and jumps, then black screen. I am able to run in safe mode and I try to run notron and I get and internal program error code: 0x8007045a.  I can't connect to the internet as well as in the safe, do not know if this is normal. I doint at currintly run a restore in safe mode to see what happens.i am able to run the Startup Repair tool, but it does not solve the problem. If I bring the details of the problem, that's what I get

  problem event name: Startup Repair v2
  signature of the problem 01: auto failover
  signature of the problem 02: 6.0.6000.16386.6.0.6001.18000
  problem signature 03:6
  problem signature 04:262148
  signature of the problem 05: no root cuase
  signature of the 06 problem: no cause root
  problem signature 07:0
  signature of issue 08: 1
  signature of the 09 problem: System Restore
  problem signature 10:0
  OS version 6.0.6000.2.0.0.2561.
  locale ID: 1033

  Try to start in safe mode and in the type of research start devmgmt.msc and press ENTER.
  In Device Manager expand adapter screen and try to turn off the graphics card and verify if you are able to boot into normal mode.

  Also try to access http://support.microsoft.com/kb/929135

  Follow the steps described in the article and see if you can boot into normal mode.

  Hope this helps you solve the problem.

  Concerning

  Srini

• Vista does not load a black screen with arrow

  Windows Vista will load only a black screen with the white mouse arrow.  I can move the arrow but by pressing the keys (including ctrl-alt-del and ctrl-shift-esc) does nothing.  The only way to turn off here is to press and hold the power button.  Same thing in safe mode.

  I tried the "Repair your computer" option (F8, or from the Windows DVD).  The Startup Repair option says that he finds no problem.  There is no restore point on the computer if it is not an option (it isn't my computer, the person who owns it is said that there should be a restore point, but if there is, the computer can't find it).

  The Dell (F12--> Diagnostics) system diagnostics found no problem (I'm sure this isn't a hardware problem).

  I tried to do a "repair installation" as in Windows XP, but this isn't an option in Vista.  The closest thing is an upgrade installation (boot from the Windows DVD, select install, upgrade).  But this option is grayed out, and he said to level I have to start the installation of Windows.  But of course Windows won't load.  Very smart Microsoft...

  The only option left is to do a clean install.  All programs and files are saved if we have all the data.  It will be just to save a lot of time and hassle if I can avoid it, and I'm surprised that such a feature/option useful XP has disappeared from Vista.

  Any ideas how I can fix this without having to do a clean install?  Thank you!

  Hello biznatch.

  Thanks for posting on the Microsoft answers Community Forum.

  Unfortunately, after trying a startup repair and hovaing, restore points is no longer to go to resettlement is all that remains to be done.  Excuse me, but this is what must be done.  It is excellent that you have already backed up your important information.

  Thank you
  Jonathan

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• Upgrade Vista to Windows 7 or 8.1

  How upgrade Vista to Windows 7 or 8.1?    What is the best to use?  I would like to use Internet Explorer.  One of them comes with it?  Don't want to lose bookmarks.

  Thank you.

  From all versions of windows with Internet explorer,

  Win - 7 is the best on all that's left is win 7 pro

  http://www.Newegg.com/product/product.aspx?item=N82E16832416804

  Win - 8 or 8.1 is about the biggest flop M$ has ever released.

  If you want that your bookmarks and other personal files I would transfer to a portable hard drive or a flash drive if you can reinstall them.

  https://www.YouTube.com/watch?v=R_4MqobX4Mw

• Upgrade Vista to Windows 7 32 bit

  I was upgrading Vista to Windows 7, 32-bit, and what I now have is a white screen.   I waited all night to make sure that everything has been

  has changed.  Now what should I do?  If I reboot, Windows 7 starts, but it goes to a white screen and I can't do anything.

  Help

  I suggest boot you from the Windows 7 DVD, and then perform a custom installation:

  How to: perform a customized Windows installation

  See the section of the article for Windows 7.

  You can retrieve your personal files from Windows.old

• How to list all the users on the Windows 8 Pro welcome screen

  I work for a small company based in the House of my boss of IT services. Because he runs the company, all the computers in the House are on a domain Active Directory (ease of management and control). Because he runs the company from his home, several of these computers are tablets/touch screens for his children, all upgraded to Windows 8 Pro.

  Currently, the default behavior of Windows 8 at startup is to display the Welcome screen showing the last user who opened a session with an option to switch to another user. If "Other user" is selected, a complete login prompt appears requesting a user name and password. This is standard fair for Windows 8, especially on a domain.
  He wants to do me is to find a way to allow a style of Windows XP (workgroup) Welcome screen displaying all the available avatars with user accounts, allowing so a child to click easily their user account and enter a picture password without ever seeing the on-screen keyboard.
  To rephrase: we want the Windows 8 Pro welcome screen to list all the (or specific, if possible) allowing anyone of you users connect to the computer without entering a user name and only enter a password (or picture password).
  I searched the web carefully and it seems that Microsoft can have deprecated this feature in an update of Windows 7 - many people shouting right lose their old welcome screen after an update. I read in the case of registry (removal of corrupt profiles and .default) hacks, security policy settings (interactive logon: do not display last user name = disabled), account policy (control userpasswords2 > uncheck: users must enter a password...) and a few other suggestions that had mixed results, which none apply to the present case , either because the settings are already in place, or because they are not available due to being on a domain.
  I'm open to exploration of any kind of registry or 3rd party software hacks that can provide this functionality. Win8 default behavior is absolutely horrible for tablets - it should be easy for multiple users to connect to a device without using a screen keyboard to enter their username and password. WIN8 is halfway there with passwords of photo, but we still have to enter a user name for all, but the user recently.
  Thanks in advance!

  Hi Jayce Nornin,

  Please be informed that he has no option to list all the users on the Windows 8 Pro welcome screen.

   

  It will be useful. If you have any other questions, feel free to let us know. We will be happy to help you.

  Thank you.

• Satellite P200 - 17 c - upgrade Vista to Windows 7

  I'm looking to upgrade Vista to Windows 7, anyone done this? And all their problems with drivers etc?

  Thank you

  Hello

  I put t know what you want to hear exactly now, but you can download all drivers here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  As far as I know that this model P200 belongs to the PSPB6 series.
  Therefore, it seems that all the drivers available for Windows 7 32 bit.

  In general, Vista and Windows 7, I can say that new OS runs much faster and has never had a problem yet. I can recommend it! :)

• Windows Resume Loader black screen on HP Pavilion dv4-2145 dx laptop Windows 7

  I have a HP Pavilion dv4-2145 dx laptop with Windows 7. After pressing the button "on", the logo operation windows says its "recovery" windows, but a black screen titled "Windows Resume Loader" appears with the following message:

  The last attempt to resume the system from its previous location failed. Attempt to resume again?

  With the 2 following options:

  1. continue with system summary, (which does not work and I end up with the resumption of the "Windows" followed a blank black screen...)

  2 Delete restoration data and proceed to system boot menu (I haven't ' truei stops because I wasn't sure what that meant)

  But I managed to go to the reviews section diagnostic systems and it seems that he pass all 5 of the test, including hard drive and memory, poster, etc. So I don't know what the problem...

  Please notify.

  Thank you very much!

  Hello

  I think that in this case, you will have to choose the second option - "Delete restoration data and proceed to system boot menu" and see if that fixes the problem.  If all etc. documents you had open before hibernation were saved, then you should not lose anything.  If there are unsaved changes (for example if you have added to a document), the file will be to the point that his last record and you lose additional data.

  Kind regards

  DP - K

• Can I keep my old emails (windows mail) if I go from Vista to Windows 8 Pro?

  Can I keep my old emails (windows mail) if I go from Vista to Windows 8 Pro? I know I have to reinstall the software, but what happens to all mails in my Inbox reception, items sent and other folders that I put in place?

  Can I keep my old emails (windows mail) if I go from Vista to Windows 8 Pro? I know I have to reinstall the software, but what happens to all mails in my Inbox reception, items sent and other folders that I put in place?

  use Windows Easy Transfer.

  Without losing all the data, you can migrate your email...

  Versions of Windows will be different here... but the methods and concepts are the same

  http://www.pcandtablet.com/Windows-7-tutorials/110/i-bought-a-new-secondary-Windows-7-PC-i-need-to-have-my-personal-settings-emails.html

  http://www.pcandtablet.com/Windows-8-tutorials/593/how-to-import-all-settings-and-and-custom-files-from-Windows-7-PC-to-Windows-8-PC.html

• Upgrade Vista to Windows 7, files using the second internal hard drive and Windows Easy Transfer.

  I have a desktop pc with 2 internal hard drives.  A hard drive has the BONE and the second hard disk is a separate partition.  (I do not combine hard drives using RAID.)  If I upgrade Vista to Windows 7, the upgrade will be to reformat hard disks or just a hard drive with the operating system?  Should I remove the second hard disk of the computer just to be sure?  The second hard drive must be reformatted for use with Windows 7?

  Thank you.

  You must install the upgrade in the Vista operating system.

  For Windows 7 install questions:

  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  "Download Windows 7 installed and activated on your PC."

  They will help you in the Windows 7 Forum at the above address.

  See you soon. Mick Murphy - Microsoft partner

• (Redirected) Precision M6500-white screen on startup and black screen on reboot

  Hello my Precision M6500 has recently begun to behave badly and has following symptoms.

  1 display a white screen on market and a black screen on reboot, the OS boots aand, one that can discern by the jingle of windows at the end of the startup procedure.

  2. the unit turns to the insertion of the battery.

  In order to isolate the root cause of these issues, I tried the following without success.

  1. replacement memory

  2. new display motherboard cable assembly

  3 start with on the SSD on the system, and even at the bios level that the symptoms remain.

  Anyone knows similar symptoms with their unit and if what was then the final fix deployed to solve these problems.

  The system is running an ATI graphics card I read a little about the black screens in booting with Nvidia cards, can anyone confirm if all the info out there has any application for ATI cards.

  Thank you

  engindigo

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.