upgrade with non - Dell MB + PSU gen5

Similar Questions

• Upgrade of the Aurora R4 PSU.

  Forgive me if this has been asked and answered already. A R4 Aurora can be upgraded with a power supply 1500w Area 51? It fit? Can I buy from Dell? My current setup is not stable with a Titan X overclocked.  Thank you

  What would you say, we get your diet 1 work before to decide, it is not decent. According to Alienware Arena forum the Aurora PSU is decent for TitanX execution. I suspect that you did a simple mistake in your schema to connector, but correct me if I'm wrong. We will use this photo as an example:

  

  you have two pairs of cables, this photo, that you have a NATURE & a blu - ylw. It's good, when running a single card: use a two-tone cable in a port & the other cable-color in the other port. Kapisch? Often both the video cable is buried in the case somewhere & the owner doesn't know it's there or it's supposed to be used.

  A simple mistake would be if you got just the blu - wht - plugged in - and then has taken only 3 inches jumper RED & plugged. Ultimately, this means that you only use a cable. On the photo below, which I seconded Area-51 vid-cables, notice how no matter there are 4 connectors present, what we're looking at is a blu & Uncable ylw. A video card would prefer that a connector of the blu & the ylw be installed, rather than clogging in the primary & the rider. When possible, use a pair cable, instead of a cable + a rider (which, in the end, is just a cable). I have it?

  

  Aurora, each cable is on its own 12 volt rail or 12v power supply. Your Titan will be beneficial if you are connecting to as pictured, let it run out of "two tracks", or two cables... not a single cable w/a "cavalier". If this is how you have it now, fix, test. If you are already connected as pictured? Hmmmm. Let me know what your story is 1.

  Here, find a chart to help get the connectors directly on a series of nVidia/AMD products:

  • Alienware Aurora ALX, R1, R2, R3, R4, can hang or encounter errors of blue screen due to the graphics card power cable
  • http://www.Dell.com/support/article/us/en/19/SLN128872/en

• Absolutely the best possible upgrade for a Dell Dimension C521 graphics card?

  I've been upgraded to a Dell Dimension C521, that I use as a general computer and play games.

  I know that he will never play in recent games, although with the x 1300 pro that was in it when I got it I have successfully played 2 games or 3 years and more. Runs of Prince of Persia: the forgotten sands, Batman: Arkham Asylum and Darksiders without any problem (all parameters lowish and resolution 800 x 600).

  Since I got it I upgraded the CPU to an AMD Athlon 64 x 2 5600 + (Windsor) and the RAM from 2 GB to 4 GB, which has cost me about £25.

  I really want to update the graphics card to something better than the Radeon x 1300 Pro that I have atm. I am aware that the PSU is only 280W and I need a map of low profile for this machine, although I read Dell generally insufficiently misses their PSUS in any case. All the posts I can find here and elsewhere online seem to be old enough and I wanted to make sure that I had discovered so far had not become outdated.

  So far, I found that the recommended card is the Radeon HD 6570.

  Can anyone suggest something better? If not, can anyone suggest what specific version of the 6570 to get (Sapphire, Asus etc.) and the amount of memory to get with it?

  Thanks in advance.

  Squall88uk

  Can anyone suggest something better?

  XFX R7 240 Low Profile Ready

  30 watts TDP, against 54 watts TDP for the 6570. Faster, too.

  A version of the R7 240 GDDR5 will be even faster, but more money, as well.

• No communication with the Dell AIO 926 printer.

  My Dell, Windows Vista, computer will not communicate with my Dell AIO 926 printer.  I went through the troubleshooting guides and the printer is powered and cables are connected correctly.  I downloaded Windows 'FIX IT' and there is no problems found.  I still cannot print anything on the printer.  I tried printing from Word files and the internet and nothing works.  I went in administrative tools to check that print spool is set to automatic, and running.  I also checked to make sure I have the latest printer driver.  None of this has helped.  Please notify.

  It worked before? have you tried the dell diagnostics. There should be a ficility to test the printer, either in the printer driver / utilities or by pressing a sequence of the inclinometer on the printer. Help of the printer Dell could guide you.

  Finally he could simply do not have

• Want to update and authentic copy of the widows 7 ultimate with the amounts deducted from the price against the Home Basic, one that comes with my dell inspiron windows 7?

  I have a dell inspiron with genuine windows 7 Home Basic with a product key. But yesterday, I have windows 7 ultimate which is not genuine (pirated) of the nave installed. its features are good. I want to make a genuine copy of windows 7 ultimate and update it.  Let me know that I can get a real and a copy updated widows 7 ultimate with the amounts deducted from prices against the Home Basic to windows 7, which is to come up with my dell inspiron?

  You can purchase a license of Windows 7 Ultimate Upgrade and convert a genuine license of your current installation.

  http://www.Microsoft.com/Windows/buy/default.aspx

  http://Windows.Microsoft.com/en-us/Windows7/get-a-new-Windows-product-key

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click on change product key

  Enter the new product key

  Proceed with activation over the Internet.

• H700 (or H710) CacheCade and SSD non dell

  I was wondering if someone got cachecade successfully work with a non dell ssd. The dell docs say it must be certified dell ssd drive (but paid £1000 for one ssd 100 GB seems excessive). This http://www.tachytelic.net/2012/02/adding-an-intel-520-series-ssd-as-a-cachecade-drive-to-a-dell-poweredge-r510/ guy says he did so I was wondering if anyone had tried. I know that dell has changed the firmware on these in order to allow no dell grows in normal conditions of use, have they moved back on cachecade as well?

  Thank you

  John,

  No Dell SSD drives should work as long as they are detected and functional.

  There is also a limit of 512 GB for cachecade.

• 6.1.4 NSX upgrade to 6.2.0: DLR fails to upgrade with DHCP relay message

  Hey all, in the middle of an upgrade of non-prod to a greenfield 6.1.4 6.2. Did the Manager NSX, and follow-up of all controllers. Then after the VMware recommended upgrade sequence, I did the GSS. Then began the DLR. When you try to upgrade the DLR, I received an error message

  The "Upgrade Version" operation failed for the entity with the following error message.

  [DHCP] To enable DHCP Relay, DR instance must be created with a single connected LIF.

  

  Also, the router now displays status in the NSX edges pane: "failed to create/update edgeAssist interface for edge edge-3.» 404 not found. »

  

  So I tried erase the configuration of DHCP on the DLR with the button relay remove, no dice. Tried to redeploy, fail with the same message. Tried to force synchronization, changes in status to "impossible to force synchronization. NSX Edge edge-3 is in poor condition. Try the operation again. The DHCP configuration disappears, but the change seems never commit, because when I browse the bracing or routing section and browse to the DHCP relay page, the original configuration is still there. It is a simple DLR with no configured HA. I have attached the newspapers of DLR tech support in case there is any support curious people out there. Note, vCenter 6.0.0 2741530, ESXi 5.5 Patch 5 reissue 2718055.

  He was just going to remove the DLR and re-create it since it's a lab, but if it wasn't a lab I just want to know why it's a failure.

  After reading more carefully, I apparently missed a step in the upgrade (hosts). I suggest that whoever does the upgrade follows the upgrade guide in pubs located here: 6.2 NSX VMware vSphere Documentation Center

  • Manager of NSX upgrade to 6.2
  • Upgrade of the Cluster controller NSX to 6.2, check the status of cluster control
  • Upgrade the cluster hosts for NSX 6.2
  • 6.2 the NSX border upgrade
  • Guest Introspection to NSX 6.2 update
  • Remove the NSX data security and redeploy

  So I tried a lot of things to work myself back from that. I tried to upgrade the hosts but that didn't fly, esx-vxlan has been blocked to version 5.5.0 - 0.0.2691051. To return to a viable State in the end I had to nuke basically the GSS, logical switches, DLR, TZ, manually uninstall the NSX vibs and unsubscribe manager the NSX to vCenter in the cluster take-off of the State of "uninstall." From there, re - install the 5.5.0 - esx-vxlan 0.0.2983935 (6.2) vibs on the cluster worked OK, and I rebuilt the gateway routing and dashboard. So read before making anywhere near prod. : )

• Upgrade of RAM Dell Inspiron i5 3647

  Currently I have a 4 GB of RAM in my Inspiron 3647 Desk Top with an i5 processor...

  You want to upgrade with another 4 GB of RAM.

  What is the specification for the RAM and then I buy from Dell?

  Thank you

  emjay35

  Thanks for the reply with explanation.

• How upgrade of workstations DELL Precision 490

  Hello!

  I want to upgrade my workstation Dell to be able to use 5 PP with HD images.

  First: I know the motherboard has a PCI x express slot 16 but not a PCI express 2, I'll be able to install a GTX 470

  If the answer to the first is NOT, assuming that I have currently have a Nvidia FX 550 will be increased aid memory, if so up to what size.

  Thanks for your help

  Edgar

  Take a look how a Dell 690 with the same processor performs the Benchmark PPBM5

  He comes down with 921 s with a card GTX 460 CUDA, approximately 9 times slower than a fast system.

• Purchase backlit keyboard of Non-Dell - having problems

  Recently, I buy a laptop Dell 15 3558, great touch screen case and many additions. One thing she didn't was a backlit keyboard, so I went and bought a (refundable) non Dell keyboard backlit on Amazon.

  I know that a backlit keyboard has 2 connections, one for data and one for the light. When I opened my laptop the light connector was something trendy (don't know how). I advanced and unplugged and plugged my new keyboard backlit non dell... Here is what happened.

  1-main Board informed and worked.

  2-back light never stops, even when you stop always on sound. (The Windows Mobility Center doesn't have even a keyboard function.)

  3 - laptop will not start unless I unplug and reconnect the laptop again.

  Any ideas what going on?

  Finally, Dell made a backlit keyboard, which would be compatible?

  Hi MOEMAYA,

  This system model is not designed to support a backlit keyboard and so there is no backlit / deactivate the toggle function keys as seen on others not models - see specs here - http://dell.to/2gryrMy

  The backlit remains on when the system is turned off and disconnected the power adapter?

  Update the BIOS - http://dell.to/2h6A06p - restart the system and check.

  If the problem is not resolved, so I suspect a problem with the installed keyboard.

  In this case, you must reinstall the original OEM Dell keyboard on the machine.

  Also, please click my username DELL and write me a private conversation with the serial number and your name for the records.

  Let us know if you have any other questions.

• Reconfigure RAID (Online Capacity Expansion) does not work for non Dell drives in the bios and is not available in OMSA for VMWare

  VMWare users have found a solution for the following?

  Readers of PERC H700 and H800 (firmware current 12.10.4 - 0001 A10, r610 servers) allow the user (in the bios during startup) to create new virtual disks using non Dell drives, but you cannot expand a virtual disk existing readers not Dell, when in the bios.  The option is grayed out.

  OMSA for Windows bypasses it.  Virtual disk | Tasks | Reconfigure can do online capacity expansion and accepts disks not Dell for this.

  Problem is OMSA to VMWare ESXi (v7.2, the current version and older versions) doesn't have a virtual disk tasks fall to the bottom.  You can not even a hard drive flashes.  (VMWare ESXi = v5.1)

  The only solution we can think of is to have two drive arrays connected to the computer, and create a simple Windows with OMSA, boot in Windows Server to expand the virtual disk using OMSA for Windows.

  I would be interested in the comments of others, including those of Dell.  We spent hours on the phone with Dell; This seems to be the only solution.  (Yes, Dell released a firmware version last year that has ceased blocking non Dell readers, but it only works for the creation of a new virtual disk, do not expanding one existing).

  The firmware update the unlocked non certified discs was in July 2010 (two years ago).  No latest updates seem to speak of changes/updates to update that.

  I don't know why uncertified discs would be blocked for a single operation (expansion/reconfigure) - are get you certain types of message that certainly is the case?  Did you do that with certified readers?  Last I heard, Dell had a firmware update in the works that would allow an extension to get the CTRL-R utility, where it historically could not be done from there.  12.10.4 as of 2012, I guess (if the Dell guy who told me he rode was OK) this update has not been released yet... However, I could be wrong.  I don't have a H700 to test with, but you can try OMSA live as an alternative to the construction of a temporary Windows Server to try the expansion of the OMSA.

  Linux.Dell.com/.../OMSA-71-Live

• You want to upgrade to OS for my Mcair with mem 4 GB 10.7.5 running. Which that I had to upgrade with? Thank you, hhai65c

  You want to update OS for my Mcair 10.7.5 running 4 GB mem. What operating system should I upgrade with? Thank you, hhai65c

  More details about exactly what MBA you have would be useful?

• Satellite A500-1GL upgraded with keyboard backlight, but do not work

  Hello

  I have a laptop Toshiba A500-1GL.
  I wanted to upgrade with a backlit keyboard, so I went to an authorized Toshiba reseller in my area (Portsmouth, UK) and after checking the laptop, they said yes, it supports a backlit keyboard and it cost around 90 pounds (about 140 dollars) the price of the backlit keyboard and the cost of installation.
  So I said okay, let...

  But the keyboard does not work!
  I went back to the place where I bought, and I asked the guy (yet) "are you sure that my laptop takes in charge the backlit? ... He said yes, and in fact he removed the keyboard and showed me 2 connectors (one to attack the keyboard and fix the lighting cable)

  Then. My computer supports portable backlit keyboard... But it's not working!
  I tried to reinstall the package added value, Flash card... Chipset... almost anything!
  But it still does not (it should work when I click Fn + Z)

  What can I do now?

  I can't return the keyboard, because the guy said "sry its now use!
  So, what should I do? Is there something I should install/remove I'm missing or what?

  Any help will be appreciated...

  See you soon.

  Hello

  What to say either the technician has done something wrong or the laptop is not extensible.

  As far as I know the keyboard lighting is controlled by the BIOS.
  In my case, I can disable and enable it in the BIOS.

  I don't know if your BIOS contain this option, but you could check it
  Please note that each model of mobile phone is supported and some BIOS each BIOS is different.

  In my opinion if the BIOS does not support this feature you so would not be able to activate the lighting, even if the keyboard has been installed.

• P50/P70: Upgrade with WWAN later is not possible anyway?

  Hello

  So maybe this is already known by everyone in the world, but me. As the P50/P70 come pre-installed with no WWAN module, but with the antennas and cables already present antenna, presumably it can be upgraded with the WWAN module when it becomes available?

  Now, that seems in German (item 38): http://www.notebookchat.com/index.php/topic, 55724.30.html

  For those who don't read German no, here is a rough translation of what the author/reviewer to Notebookcheck.com, Andreas Osthoff, wrote:

  "

  Hello everyone, we have now a statement from Lenovo on the LTE modems:

  "The current P50 ThinkPad and Thinkpad P70 are unfortunately NOT" WWAN (LTE) READY "even though that some models were already pre built with the necessary antennas. As it seems at the moment - probably not it is possible that an option of post-installation WWAN (ETL) for P50 ThinkPad and ThinkPad P70 will come.

  The reason:

  The WWAN (LTE) module works at a frequency of 2133 MHz, the same as the used Skylake CPU with @ 2133 MHz DDR4 memory. This causes "interference" to occur, i.e. superposition phenomena when radio waves collide.

  "

  He also wrote that the P50/P70 will be delivered with WWAN/LTE April pre-built options.

  For me, the P50 Thinkpad more like a product rushed. The bad thing for Lenovo, it is their top-of-the-line Workstation laptop series.

  I'm still hoping that this statement was made to someone at Lenovo who didn't know what he was talking about, but knowing the bandwidth of the LTE channels 2.1 GHz, it seems likely that the statement is correct.

  So Lenovo: Is the information which the above correct?

  If so, what CAN be installed in the WWAN slot, now that the antennas are already pre-installed, considering that you are using a whitelist for WWAN modules?

  
  

• Mac pro with monitor Dell P2414H book: how to rotate the image displayed in mode portrait when I rotate the monitor 90 degrees

  I have a mac book pro retina bought in 2014 which I use with a Dell P2414H monitor.

  I bought this monitor because it can turn up to the vertical position ('portrait'), but when I do that the image of the screen does not turn with it.

  I called Dell and they said that it is a problem to solve with Apple.

  Does anyone else have this problem? and it got fixed?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.