USB 2.0 ports on the front of the Inspiron 660

Similar Questions

• USB 3.0 port select the pen drive, but does not allow to load mobile

  Hello

  I have acer Aspire V3 - 471G laptop with usb 3.0 port. In this port, it says usb charging device

  the manual also says it can charge when connected to the laptop via a usb port.

  If I insert the USB key, it allows to use, but when I connect the mobile to laptop using data cable the mobile isnot responsible... Why? Please help me... I m in prblem... I think that usb 3.0 is not damaged but not chargin... makes me using trouble.please! 11

  If the USB 3.0 port sees the other USB devices correctly, we know that the USB port works correctly.

  This does not guarantee that load power supply is working properly.

  Make sure that the cable is a charging cable.  If this does not work, you may need to contact the Department for further assistance.

• HP HDX X18T - 1200 CTO: where is the USB 3.0 port on the HP HDX X18T - 1200 CTO?

  The HP HDX X18T-1200 CTO Premium Notebook PC has USB 3.0 ports?

  No it's not. It precedes USB 3.0 a little. You can add ports usb 3.0 ExpressCard location and a complement to the card.

• How to determine the USB 2.0 ports on the machine.

  Original title: Usb 2.0 Ports.

  My Device Manager lists 8 Usb ports, including Usb 2.0 2.  How can I determine which ports are 2.0?

  Hello

  To determine the USB (Universal Serial Bus) 2.0 port, you can connect any USB device to each port & check in Device Manager at the same time to check which of the 8 USB 2.0 ports.

  Hope the helps of information.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Can I replace front usb 2.0 ports with 3.0 - if so how?

  I have a HP p6653w 64-bit with Windows 7 which currently has 2 usb 2.0 ports at the front.  I want to replace it with usb 3.0 ports but I don't know if I can or the steps to do if I can?  HP support told me to use Buffalo USB 3.0 PCI Express Interface Card for the replacement of back, but I have a drive hard toshiba laptop which has a cord usb very short, so I prefer to Exchange just in front.  Thank you.

  Hello

  All standard pins on the USB ports are the same.

  Kind regards.

• cannot detect usb 3.0 on Pavilion 15-N253TX ports after the downgrade from Windows 7 Pro

  Due to compatibility problems with other software, I had upgrade to Windows 7 Pro and have now detected problems the 2 usb 3.0 ports on the left side. Have the power, but can't see all the connected devices.

  Have you tried

  Intel USB 3.0 controller driver host.

  Fresco logic USB 3.0 Host Controller Driver ,

  Renesas Electronics USB 3.0 Host Controller Driver,

  NEC Electronics USB 3.0 Host Controller Driver

  Still no love.

  Help, please.

  Hello

  Please try:

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=3467&DwnldID=22824&keyword=USB+3%2C0&lang=eng

  Kind regards.

• VN7 - 791G: Wifi slow and unreliable when a USB drive is plugged into the USB ports on the right.

  WiFi becomes quick and reliable whne the memory stick is disconnected. Always reproducible. Does not occur when the memory stick is plugged into the USB port on the left. Also has anyone seen this behavior?

  Wireless network adapter Qualcom Atheros QCA61x4 with the version of the driver 12.0.0.230 dated 03-2016-21.

  Thank you

  Chris

  Hello

  The explanation is simple. I'm sure that the memory stick is a USB 3.0, a plugged in a USB 3.0 port. The problem is that all USB 3.0 devices generate a 2.4 Ghz interference, as it generates interference on the frequency working on wireless. The solution is to connect the player to another port or to spend the 5 GHz wifi if your router supports. The wifi antenna is probably very close to the port and to the USB key.

  This is known for a long time, and has nothing to do with the laptop.

  There is an article on the Web page of intel who described the problem more technically. You can search if you wish.

  This causes a problem also with a wireless mouse, if the receiver is connected next to a USB 3.0 stick or any other device.

• Tecra R840-10 t has no work webcam or USB 3.0 port

  Even if this [another thread | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=62061&start=15&tstart=0] has been marked as resolved, the problems remain, but are not related to the bone, hw-partners.

  1 week after that I got a Tecra R840-10 t (PT429E-00M007EP) of Windows 7 have frozen at startup and the fan run at maximum speed. All I could do was to enter safe mode. After a factory reset (reinstalling OS of the hidden HD partition), not even the safe mode worked!
  Took back to the store, 2 days later a local Toshiba representative referred to the store as fixed (they have updated the BIOS...)

  2-3 weeks later, same problem. I called Toshiba directly, they have picked up the laptop, took almost 2 weeks and sending parts of the Germany twice before they sent it. I had to call them to find out they were going to deliver the next day. So far it seems to be fixed, Windows has not frozen since.

  However, now, little more than a month after I bought this laptop from professional quality, I noticed that, on his return, the USB 3.0 port (as long as this port) and the webcam does not work. They do not appear in the Device Manager, update their drivers through page for the download of Tecra yields nothing (and you have to go through hoops to actually install the webcam driver), nothing. It's as if they did not exist. I guess that any material they brought in wasn't exactly in perfect condition, or someone forgot to plug it into some pine trees.

  I tried several Linux LiveCD as well, they all recognize the material to varying degrees (being the most comprehensive Debian), but no recognize the USB 3.0 port or the webcam as well.

  Not an OS problem. Call them once again, waiting for a response from a representative Monday morning. Seriously considering to move directly to a repair center and asking the complaints book. There is no guarantee that this laptop won't break again.

  Not a happy camper.

  Hello

  > I tried several Linux LiveCD as well, they all recognize the material to varying degrees (being the most comprehensive Debian), but no recognize the USB 3.0 port or the webcam as well.

  Have you tested this with Toshiba configured OS?
  It would be interesting if Windows 7 would get the same problems, recognizing the USB 3.0 and the webcam

  by the way: this is a user forum to...

• Satellite P850 - 12Z USB 3.0 Ports right side do not work USB 3.0 speed

  Hi all

  I bought a portable Satellite P850-12Z with * 4 * USB 3.0 ports. Two ports on the left side and two ports on the right side with sleep functions and fresh.

  If I connect an external drive Verbatim USB 3.0 ports on the left side, everything works fine. Transfer rate is about 70-90 MB/s, but if I connect the * same drive * USB ports on the right side I see the pop up message "this device can perform faster if you connect it to a Super Speed USB 3.0 port" and the transfer rate is about 20-30 MB/s. These ports operate as USB 2.0 ports.

  I repeat that all the available ports on the laptop are USB 3.0.

  Anyone know what is happening with ports USB 3.0 on the right side?

  I don't have another USB 3.0 drive to do more tests.

  Thank you

  Carlos

  > I repeat that all the available ports on the laptop are USB 3.0.
  You are absolutely right.
  I ve checked specification s notebook, and all ports are USB 3.0 ports.

  It is not easy to say what the problem is here.
  What you can do is to contact the nearest Toshiba service provider and ask for explanations.
  They know what the problem is here.

  Maybe a few update driver or BIOS update offered in the future will solve this problem. In my opinion, you should continue to use the ports on the left side for data transfer.

• Nighthawk R8500, USB 3.0 Flash drive not recognized USB 3.0 Port, Port of only 2.0

  My Nighthawk R8500 router with the latest firmware, V1.0.2.54_1.0.56, does not recognize my SanDisk Ultra Fit 128 GB USB 3.0 Flash drive when it is connected to the router USB 3.0 Port. The Ultra Fit is formatted in FAT32 and works fine when plugged into USB Port 2.0 router or my laptop.

  At first, I thought maybe USB 3.0 Port on my router wasn't working at all, but it recognizes my SanDisk 16 GB Cruzer USB 2.0 Flash Drive that is also formatted FAT 32. Unfortunately both my laptop have USB 2.0 Ports, so I don't know if the problem is with the router or the Ultra Fit Flash Drive. Everyone knows about this problem of their Flash 3.0 player is not recognized in USB 3.0 Port their router, especially with a SanDisk Ultra Fit? This problem can be resolved through firmware? I'd really like to take full advantage of the speed of USB 3.0 as I like to share files through my router via ReadyShare and ReadyCloud.

  Thanks in advance for any help, Carlos

  Technical support with me. Installation of a updated firmware, V1.0.2.64_1.0.62, which became available shortly after my post, solved the problem. -Carlos

• HP Envy 14-1010nr: HP Envy 14-1010nr Notebook PC: replace and upgrade to USB 3.0 ports

  Hello
  
  I have a HP Envy 14 - 1010nr Notebook PC, which had two USB 2.0 ports on the left side and a USB 3.0 port on the right.
  
  USB 3.0 port was damaged such as connectors plugged it seem a little loose and can move laterally a little so that the connection to the device comes in and out - makes it uncertain to copy some stuff on a hard drive through it, for example.
  
  Is it possible for me to replace this port? Where could find a spare part for that if it can replace?
  
  Even though I am inside the computer, I might as well replace the USB 2.0 with USB 3.0 ports ports if the pats replacement for that exist...

  You're right, because there is no audio + USB 3.0, only the original + USB 2.0

• HP DV7 ENVY: USB 2.0 Port does not

  Hello

  I have a DV7 HP ENVY with 3 - USB 3.0 ports and 1 - USB 2.0 port. The USB 3.0 ports are working well but USB 2.0 does not work. When you plug a USB stick to the USB 2.0 port power led on the memory stick lights up but the led data is not. The computer does not at all to the inserted USB memory. The USB works fine in other 3.0 ports. I tried also to connect other USB devices, and it's the same thing. They work well on USB 3.0 ports, but nothing happens when you connect to a USB 2.0 port.

  I was looking at the USB drivers in Device Manager and haven't noticed anything that seems strange.

  I have run the system test diagnostic USB to start the system and got the following codes:

  Failure ID: 9BXQGK-6JK858-QFPK0K-8D0G03

  Product ID: C1W26EA #UUW

  No idea if this is a hardware or software failure?

  Hi @pefre,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand that the USB 2.0 port has failed on your laptop. According to the fault code 9BXQGK-6JK858-QFPK0K-8D0G03 you officer, I got following results:

  ID Tag9BXQGK-6JK858-QFPK0K-8D0G03 failure

  ChecksumOK

  16/06/Date2016 of test

  Failure Code434

  Device

  Communications

  Includes

  GPS, HUB, Modem, network, map network drive, PCI, PCMCIA, Switch, USB card

  Error message

  Failure of USB (not specified)

  It seems that there is a hardware failure with the USB port.

  Is your laptop still under warranty? If so, please contact support phone HP load a repair:

  Please the following link http://www.hp.com/contacthp allows you to create a folder for your problem and contact HP. If you do not live in the United States / Canada, please click on the link http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html to get contact information for your region.

  Please let me know if that solves the problem by marking this message as "accept as a Solution.  To simply say thank you, click the thumb upward below!   If you need more assistance let me know and I will gladly do everything I can to help. Thank you.

  Kind regards

• HP Elitebook 8460p: USB 3.0 ports do not work

  Number and name of the product: HP Elitebook 8460 p - WX558AV
  Operating system: Windows 7 Pro 64-bit

  When I opened my laptop today, my wireless mouse will not work. Then I find that all my USB 3.0 ports on the left do not work or the other. If I plug in my external hard drive, I can see clearly (which means power is there), but the drive will not be displayed in Windows Explorer.

  I also had another weird error that my computer will not shutdown. It will be auto-restarting/reset in a few seconds. Very strange.

  Is this a software or hardware failure? This laptop was bought anything recently and I expect the quality of the business.

  Thank you

  Hieu

  I solved this. It wasn't because of the driver. I reinstalled the driver from this link that you provided before the validation of this one, but it did not work. I googled high and low and found various fixes, but they do not work.

  I have even come back to an image previous when I just installed Windows 7 (and at that time where the USB ports still work). However, after restoration, the ports still refuse to recognize any USB.

  So I think that there are only 2 possibilities: hardware failure (1), or a BIOS (2) problem.

  Then I updated to the latest version of the HP BIOS (using HP Support Assistant) and then voila. Problem solved.

  I guess the updates of Windows 7 somehow comes into conflict with Bios HP, where the question.

  I hope my explanation is clear enough for someone with the same problem can fix their computers.

  Hieu.

• all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  all of a sudden... my computer does not see the things I plug into the usb ports on the front of the computer...?

  If I shut down the computer and plug... he sees the thing then turned back...
  I can not just plug in while the computer is turned on... once again he has used to do this just as well... for some reason any, he sees things now.
  any thoughts?

  Hi KK Waddell.

  Thanks for posting in the Microsoft Community.

  I understand that you face the issue with the USB port does not work when you embedded on the front of the computer.

  Before you start the troubleshooting steps, I need the information required.

  1 did you changes to the computer?

  2 did you receive an error message?

  I suggest you to check with the other USB port.

  I suggest you to see the links and check.

  USB port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  One or more USB devices may not work when you start your Windows XP-based computer

  http://support.Microsoft.com/?kbid=885624

  See also:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

• Looking for the USB Ports on the front of my desk for my ipod

  my model is HP P7-1044, Windows 7

  I'm looking at the front of my pc from one place with easy access to recharging my ipod. so my question is can plug you all devices that need a USB Port in the back of my pc. only. I do not understand this sd/mmc, xd/smart media and compact flash.

  Thank you very much and I think I know what the problem is. There are two buttons, one on the top to open the cd drawer and the other is supposed to open the tray of expansion and my button stuck inside or do anything when I click on it. I bought it as a model of future shop floor so I'll have to consider if this is the case. I tried opening with my hands.