USB 2.0 question

Similar Questions

• USB 3.0 question! PLS HELP!

  I have acer aspire es1-131-P4YH model... the following questions, I am facing right now is...

  1. my USB 3.0 keeps cutting and restoring while I transfer files (usually from 200 at most) from or around - 3 key USB to the computer and vice versa. I have an ADATA 16 GB USB 3.0 UV150 key...

  I hit google and has almost everything fact...

  -usb energy saving suspend power management

  -"allow to disable usb energy saving" disabled for usb 3.0 extensible host controller, controller xHCI and also for same input device usb human interface device tab, and also when usb is plugged in, a new device from USB mass storage pop up... that is also disabled for this too...

  -uninstalled/removed all form tab USB controller and rebooted the computer to auto/load to reinstall drivers usb 3.0 - same question

  -one last thing, I have a usb 3.0 host adaptation pilot came with the laptop... Installed and hoped it would work now... but NO!... This is not the cd rom and usb 2.0 is used for the mouse... .so to transfer or install I especially need to rely on usb 3.0... someone had to help me out here... I'm in big trouble

  I received the netbook with windows 10 pre-installed... pro is this hardware problem or a driver problem

  ALSO, WHAT IS THE VERSION OF THE MODEL INTEL CHIPSET?

  Good so I think you can contact Acer directly for support

• Satellite P70 - USB-A - 3 questions

  Hello

  After the installation of update Windows 8.1 on my Toshiba laptop, I have following strange behaviour:

  My external drive USB 3, which works perfectly on all other computers, only works on one of the four ports USB 3 (the upper left). If I connect it to the a 3 other ports, its "On" lights up, but it is not recognized by Windows (whether in 'My Computer', Device Manager or disk management) and I can't use it.

  If I disable the USB 3 support via the utility 'System Settings', the drive is recognized by all ports.
  I have re installed all drivers, followed the order of installation in the instructions but still nothing.

  No idea why this is happening?

  Hello

  I think that you should first check if the update 8.1 Win was really the reason of this problem.
  That's why I recommend you delete / undo the last Microsoft Update.
  You can do this by setting the system to a previous state.

  By the way: the USB 3.0 driver is part of the Windows System. Microsoft driver and it could be possible that updates received MS updated USB driver 3.0 as well.

  However the issue described resembles the external HDD doesn't receive enough power from the USB port. The need for USB 3.0 devices round on 900mA power in order to work properly.

  Try to connect the USB HDD on two USB ports using the USB Y cable.
  It would be interesting to know if this contributes to make it work.

• BlackBerry Storm 9500 Blackberry Smartphones - USB charge the question and problem of missed calls log

  Dear all,

  first of all Hello to everyone and that being said, I * fact * search both Google in general as well as this forum, in particular, prompt even to Vodafone was not any help, here I am, stuck with 2 problems with my BB Storm 9500 (.141 firmware, user of BES, Vodafone Germany) and it drives me crazy. Maybe someone here can help me.

  1. is it possible to load the storm via a USB cable connected to a computer * without * be disconnected from the network?

  Forcing me carry the charger around like a heavy phone (while previous models of BB) user authorized to charge by computer/USB without being offline.

  2. What can I do to see the missed calls in my call log?

  For the moment, I don't have the option to log in the missed calls message window, but to see them I have to unlock the storm via password I try * very * inconvenient (btw, the option to view missed calls directly in the call log was yet another function available with earlier models of BB).

  Any help or advice greatly appreciated!

  Concerning

  Jack

  Hi all

  It turns out that everything reported were caused by a screwed up political IT... that being resolved, everything works like a charm...

  THX once again all for your support and advice.

  Concerning

  Jack

• Overview of 2014 still USB 3 hub question

  There is a long-standing problem with USB3 devices plugged into a hub - if a guest Windows 7 runs when the device/hub is connected, devices are not available at the reception (no matter what you choose in the dialog box).  Even when the merger stops devices remain inaccessible until you reboot the host or plug it into another USB port on the host computer.

  Any issues with the merger, that's my point of great pain - I swap drives through hubs (or turn them on and off all the time).  A big request that it be corrected in the next version.

  I looked in our bug report internal on the issue of USB 3.0 hub, and it seems that the problem is a combination of Fusion claiming out of USB devices (in order to connect to a virtual computer or host), and a problem with USB 3.0 driver Apple not to issue a reset command correct to devices connected through a hub.

  There is a possible solution if you want to try:

  1 pause or stop the virtual machines running, and stop melting.

  2. ensure that the vmware-usbarbitrator process is no longer running.

  3 create/modify host-global configuration file, with root privileges: (this example uses nano, but feel free to use another editor)

  sudo nano Fusion Library/Preferences/VMware\/config

  4. Add the following line to disable the automatic suitor of USB devices:

  usbarb.autoconnect.claimAll = "FALSE".

  5 save the file and exit the editor.

  With this change, all USB devices should automatically connect to the host, even when virtual machines are running. Note that it will completely disable the USB connection prompt and stop devices to automatically connect to virtual machines (even if the option is selected in the settings). However, it should always be possible to manually connect USB devices to a computer running virtual (except perhaps in cases where the reset command is not correctly broadcast via the hub).

• 2.0 card USB and Firewire PCMCIA for Satellite Pro 6100

  I have a 6100 Pro of the Satellite with the USB 1.1 and I would like to install a pc card in the side slot which will act as a USB 2.0 / Firewire conector to increase speed, when using USB. My question is - is this possible with the 6100 series? the card will act as a separate high-speed 2.0 USB while others (oem) remain at 1.1.
  If it's ok does anyone know name and type to use pc card?
  I am running windows xp.
  thsnks, Rick

  Hello

  However, I know that it of possible to use 2 x PCMCIA Type II cards and 1 x of Type III PCMCIA card. In addition, the PCMCIA port supports 16 and 32 bit cards.
  You can use USB 2.0 + FireWire 1394 Combo PCMCIA Card like this:

  http://www.computercablestore.com/detail.aspx?ID=2155

  Of course, you can also try to use another.

  Good bye

• iOS 9.2 audio distortion on Lightening to USB (scrambled or skip/search as noise)

  As a result of this thread: iOS 9 lightening to POPS and clicks audio USB

  SITUATION
  iPhone 6 s more, iOS 9.2, Opel Ampera/Chevrolet Volt, Original Apple Lightning-USB cable

  QUESTION
  -Stuttering and seek/skip like sounds - audio distortion will occur during playback of audio files on a lightning to USB connection. The question of anywhere between 3 and 15 minutes in an audio file or the track. The question will arise only when the phone is locked.

  REPRODUCTION

  1. read audio for a long time (> 5 minutes) on an iPhone LOCKED running iOS 9.2 and wait for the audio distortion.

  2. once the problem occurs, UNLOCK the phone and the issue will be settled immediately.

  2B. pause playback and wait about 5 to 10 seconds until that play again will also solve the problem temporarily.

  3. once the phone is LOCKED again (stop automatic or manual) the question will return immediately.

  NOTES
  The question can be heard mainly using brackets of spoken. The issue will occur with the music, but because of the strong momentum may have certain types of music, the question might be less visible.

  If you have something similair, thanks for posting your results in this topic.

  + 1

  2011 Saab 9-5, 6 s, iPhone iOS 9.2, Apple music

• GPS (global positioning) will not work. Lack of USB mass storage device

  When I plug my GPS device into the usb port and driver disk into a dvd, where both worked, the installation wizard gives me a notice of default. Reference to the Device Manager shows 2 yellow? mark. Use of the facility of re - install and update does not solve the problem. I get a message indicating that a usb mass storage device is missing. Insertion of other devices on the usb port in question, or any other, says there is nothing wrong with any. Does anyone have an answer

  Hello

  You are able to correctly use the other USB devices on your computer, I recommend you contact the manufacturer of the GPS (global positioning satellite) for assistance.

  Hope the helps of information.

• Cannot transfer files to/from the USB device after upgrade to 6.0

  After update MM I can't transfer the file of/device USB using the Commander file, Astor or any other file manager, also is not in this apps, I can access content outside of these applications, but cannot copy or paste something!
  I tried different types of USB storage even question!
  Did I forget something?
  Help please my world depend on this, can't use the laptop whenever I need to transfer files...

  I bypassed this problem by downloading a new app from File Manager - File Explorer ARE pro. Able to copy and move files with it.

• How can I install Windows 7 on asus x501a with usb flash

  I have an asus X501a windows 8 on it now, I would like to clean install windows 7 on it. This model with no dvd rom usb player is the only solution. Menu of boot Asus is very complicated because it is menu uefi, I'm completely confused, please help me how to clean install win 7.

  concerning

  Mr. Fadil

  Here is the solution:

  (1) place a bootable copy of Windows 7 on the USB key in question (there are several utilities to accomplish this, including PowerISO, v4.8 or superior and USB DVD Tool from Microsoft

  2) access the bios during the startup with F2

  (3) enable MSC startup and Save tab

  (4) re-boot and re - access the bios with F2

  (5) select the USB (the one without prefix of UEFI) as an option of Boot #1 and Save

  (6) re-boot and Windows 7 will launch its installation from the USB

  * Once the initial installation takes place and the machine re boots, you must re - access the bios, WSC, disable and set the internal hard drive as the Boot #1 option and save

  I have finished the taks in the order described above and have a copy of Windows 7 X 64 running on the ASUS X501A job.

• Wireless remote access disk attached to the router wi - fi via USB

  I access the internet from Windows 7, you use a wi - fi FiOS router. It has a USB port on the router. I connected an external hard drive (already correctly formatted) to the USB port. QUESTION: How can I access the HDD (wireless) of Windows 7? Currently, Windows 7 does not indicate the presence of the external drive.

  If you have the Actiontec MI424WR (Verizon FIOS router more common) the USB port is pretty useless.  Here is a quote from the Manual:

  "The USB port provides up to 5 VDC for the devices connected (to recharge a mobile phone, for example). In the future, with an update of the firmware version, the USB host feature will be available as external storage devices and cameras. »

  Here is a related discussion: http://forums.verizon.com/t5/FiOS-Internet/USB-Port-on-Actiontec-MI424WR-Rev-E/td-p/277749

• BitLocker without TPM refuses to recognize the USB key at startup.

  I have a Windows 7 PC, I'd need to BitLocker, but it fails to recognize the USB key at startup. I've resorted to skip verification and now enter the recovery key every time you start (this PC has a lot of data on what should be confidential), but it's not ideal.

  What is curious to me, is that the computer will start perfectly fine from a USB key, or produce a message of type "non system disk or disk error", if the USB key in question is not bootable. So it is not a matter of lack compatibility USB BIOS. When Bitlocker should read, yet there is no actifvity on the USB key. It seems to just try to read the empty floppy drive then give up.

  The PC is an all-in-one RM with an Intel D915GX motherboard.

  I tried two different USB, 64 megabytes cheapo player drives I usually use as a Bitlocker key and a 2 GB Cruzer Blade. I mucked with some of the BIOS settings but not in a particularly organized way. And I checked the key file is saved on the disk. Everything I did, Bitlocker will not always see the USB.

  Any suggestions?

  Hello

  Thank you for you answer and share the status of the issue.

  Sorry for the late reply.

  I suggest you to please update your motherboard chipset drivers

  Follow the link below:

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProdId=1676

  You can also check the drive (that you encrypted) to find errors by following the link below:

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  WARNING:

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  Additional information:

  In Windows 7 BitLocker Drive Encryption: frequently asked Questions

  http://TechNet.Microsoft.com/en-us/library/ee449438 (WS.10) .aspx #BKMK_USBDrive

  Deployment Guide for Windows 7 BitLocker Drive encryption

  http://TechNet.Microsoft.com/en-us/library/dd875547 (v = ws.10) .aspx

  Hope this is useful

• The request cannot be performed because of the I/o device error when opening a USB flash drive

  Original title: USB Flash Drive issues

  So, I tried to open my flash drive on my Dell Inspiron 15 with Windows 8 today to make an assignment. But for some reason some it does not open. This is what appears when I try to open it. I've done many things that are supposed to solve the problem with the ports themselves, but nothing seems to work that makes me think that it is the actual flash player. I don't know what to do all that my University materials are there then I really need to work, or at least find a way to get at least most of my files. Thank you very much for the help in advance.

  Sorry for the late reply Jose. I appreciate your efforts to resolve the issue.

  This can occur because of one or more of the reasons below:
  1. the currently loaded USB driver has become corrupt or unstable.
  2. your PC requires an update for problems that could conflict with a key USB and Windows.
  3. Windows may miss other problems hardware or software updates.
  4. your USB controllers may have become unstable or corrupt.

  Check the disc on another computer flash memory to ensure that the issue is not with the device.

  You can try the methods below:
  Method 1: Uninstall, then reconnect the USB flash drive:
  This method solves the problems where the currently loaded USB driver has become corrupt or unstable.
  1. go in search for, type device manager in the search box
  2. click on Device Manager in the returned list.
  3. click on disk in the list of hardware drives
  4. right click on the USB with the question and click on uninstall.
  5. once the flash player is uninstalled, unplug it.
  6. wait 1 minute and then reconnect the USB flash drive. The driver should load automatically.
  7. look for the USB key in Windows Explorer

  Method 2: Reinstall the USB controllers.
  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.
  1. click on start, type device manager in the start search box, and then click Device Manager.
  2. expand Bus USB controllers. Right click on a device, and then click on uninstall. Repeat for each device.
  3. Once complete, restart your computer. Your USB controllers will automatically install.

  I hope this helps to solve the issue. If you still have the same problem, get back to us.

• HP Pavilion 17-f115dx: a USB Microphone works on a HP Pavilion 17?

  Hi, I've learned that Microphones do not work on HP, as said to helmet catch. So, I wanted to buy a new blue snowball that is powered by USB. My question is that if it works, so I'm not wasting my money.

  And please press, that it is for sale

  Hi there @andyfragz ,

  Thank you for visiting the Forums HP's Support and welcome! It's a great site for information and questions.

  I have here a document that shows you the specifications appropriate for your HP Pavilion Notebook f115dx 17. If you look at the page you will notice under external Ports, you have;

  • 2 ports USB 3.0 superSpeed
  • 1 universal Serial Bus USB 2.0 Port.

  It depends on the specifications of the Blue Snowball USB device. Make sure before you buy that it is compatible with the USB 3.0 Ports or the Ports USB 2.0 and make sure that there is a specific driver for your 64-bit Windows 8.1 available for the Blue Snowball USB device.

  If they match specifications and there is a specific driver that is compatible with your operating system, it should work.

  Re-post and let me know how it goes.

  Thank you

• Fusion takes over my USB speakers and don't give them back!

  I use VMware Fusion on OS X and Windows Vista.  I have a pair of Harmon Kardon Soundsticks connected via USB.  I have activated their merger via the menu "settings".  The merger is able to use them to read audio data.  So far so good.

  However, when I left the audio for OS X by default Fusion to the internal speaker.  What more, when I go into Preferences system & gt; His, I don't see that the output listed in the tab Soundsticks Harmon more.  It is as if the Fusion 'hijacked' them and returns to OS X.

  I tried to unplug the USB dongle and in plugging it back.  Does not work.  Tried to disconnect and rear connection.  Does not work.  The only thing that solved the problem is to reboot.  Of course, it is a pain.

  Is this a known problem or there at - it a setting I can use to fix?

  A USB device can be directly controlled only by an operating system at a time so if, when you say "when I leave Fusion...". "is stop Virtual Machine target, not suspended, in the guest before quiting OS merger or you're just quiting Fusion and allowing the virtual machine will not target?  If the latter you must eject the USB device in question since the icon remove the device safely in the Notification area of the taskbar, and then disconnect the virtual computer target USB device from the USB icon on the status bar of the Virtual Machine of the target or the Virtual Machine > menu USB before to stop or suspend the Virtual Machine and or quiting merger.