USB 3.0 64 GB - how I format in 64 GB NTFS on Windows 8.1?

Similar Questions

• Cannot start Windows XP. How to format my hard drive and reinstall Windows XP?

  Unable to log on to Windows XP and continues to repeat the initialization. May I know what is happening to my system?

  Dear Sir/Madam,

  I can not even log in to Windows XP, this is why I am not able to access the system restore. Can I know how can I format my hard drive because I can't find all a command 'format '. The system continues to repeat opening a Windows XP session but failed. Help requested to provide your professional advice & solution.

  Yours sincerely,

  Davidaries

  Hello DavidariesGoh

  Reinstall Windows XP
  To reinstall Windows XP, try either of the following methods. If the first method does not work, try the second.
  
  Note You can disconnect from the Internet during the installation. This helps to protect you against malicious users. Method 1: Start the reinstallation of Windows XP to reinstall Windows XP by using the Windows XP CD, follow these steps:

  1. Start your computer.
  2. Insert the Windows XP CD in the CD drive or DVD drive of your computer.
  3. In the Welcome to Windows XP page, click Install Windows XP.
  4. On the welcome page in Windows installation, click upgrade (recommended) in the Type of Installationbox (if it is not already started), and then click Next.
  5. On the license agreement page, click I accept this agreement, and then click Next.
  6. On the your product key page, type the 25-character product key in the product key boxes, and then click Next.
  7. Get the updated Setup files page, select the option you want, and then click Next.
  8. Follow the instructions that appear on the screen to reinstall Windows XP.

  If you completed the reinstallation, congratulations. You are almost finished. Please go to the section "after you have reinstalled Windows XP' at the end.

  If you receive an error or if the reinstallation did not finish, try Method 2. Method 2: Repair install of Windows XP by starting your computer from the Windows XP CD Note if Windows XP was preinstalled on your computer, you may need the installation CD to reinstall. Contact the manufacturer of your computer to make sure that you have the CD for a repair installation.

  To reinstall Windows XP by starting your computer from the Windows XP CD, follow these steps:

  1. Insert the Windows XP CD in your computer's DVD or CD drive, and then restart your computer.
  2. When you receive the message "Press any key to boot from CD" on the screen, press a key to start your computer from the Windows XP CD.
  3. The following message on the Welcome to Setup screen is displayed:
     This part of the Setup program prepares Microsoft Windows XP to your computer: to set up Windows XP now, press ENTER. To repair an installation of Windows XP using the Recovery Console, press R. To quit Setup without installing Windows XP, press F3.
  4. Press ENTER to set up Windows XP.
  5. On the Windows XP licensing agreement screen, press F8 to accept the license agreement.
  6. Make sure that your current installation of Windows XP is selected in the box, and then press R to repair Windows XP.
  7. Follow the instructions that appear on the screen to reinstall Windows XP. After repairing Windows XP, you may have to reactivate your copy of Windows XP. For more information, click on the number below to view the article in the Microsoft Knowledge Base:
     310064 how to fix Windows XP Setup problems when you upgrade from Windows 98 or Windows Millennium Edition

  If you completed the reinstallation, congratulations. You are almost finished. Please go to the section "after you have reinstalled Windows XP' at the end.

  If you receive an error or reinstallation did not finish, unfortunately, this article did not resolve your problem. For your next steps, you can ask someone you know for help. Or, you can contact Microsoft Support to help you resolve this problem.

  Back to top

  After you have reinstalled Windows XP after completing reinstallation, perform the following final tasks.

  Note You can also turn on the firewall in Internet Explorer. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

  283673 how to activate or turn off the firewall in Windows XP

  Reinstall Windows XP Service Pack 2, Windows XP Service Pack 2 (SP2) has been installed on your computer until you have reinstalled Windows XP, you must reinstall SP2. If you do not have already reinstall SP2 with Windows XP in the previous section, use one of the following methods to reinstall SP2 now. To order Windows Service Pack 2 on CD, visit the following Microsoft Web site:

  http://www.Microsoft.com/windowsxp/downloads/updates/SP2/cdorder/en_us/default.mspx

  For more information, click on the number below to view the article in the Microsoft Knowledge Base:

  322389 how to obtain the latest Windows XP service pack

  Reinstall all Windows updates after reinstalling Windows XP, you must reinstall all updates to Windows also. To reinstall Windows updates, visit the Microsoft Web site at the following address:

  http://update.Microsoft.com

• How to format USB 3.0 player to play more than 4 GB on TV media

  Hello

  I'm looking for a way to format a USB drive to play media on my television. This problem seems to occur when the upgrade to El Capitan. I could always format the USB to play large files of 5 to 15 GB and easily play through my smart TVs. I am able to always format the drive to the exFAT to enable the large file size, but my TV does not recognize the drive and therefore can't play.

  Is anyone else having this problem or knows how to solve this problem? Thank you

  What format your TV so not recognize ExFat? If the TV accepts the format ExFat, you can try formatting the drive ExFat using a Windows PC to see if it works.

• How to format my USB after making it bootable with Windows 7 USB/DVD Download Tool

  I used the Windows 7 USB/DVD download tool to make my bootable usb key. But now I can't format it. When I open my computer and connect my USB it is shown as a cd. Also when I go into disk management it is shown that two disks hard each of them Go 99,76 and a CD-ROM that has 1123,13 GB RAW. I've tried a few programs for formatting, but they say that it is protected against copying. Is it possible that I can use as a normal USB again?
  Thank you very muck for your help.

  Hi mifocc,

  ·         What is the brand and model of the USB?

  Check if there is no slide switch on the side that provides protection against Scripture. This spectacle of a lock closed and open on each side.

  I suggest you follow these steps.

  (1) Insert the USB key into the USB port.

  2) click Start, type devmgmt.msc in the search text box and press ENTER.

  (3) find hard drives and expand it.

  (4) find the USB flash drive you want to format, and then double-click it. He opens the Properties dialog box.

  5) click on the policies tab.

  (6) the default option optimize for quick removal of the selected options, put it to optimize for performance, and then press OK.

  (7) now, open computer. Right click on the USB Flash drive and select format. The Format dialog box will now appear.

  (8) in the file system field, select NTFS.

  9) Press Start and wait while the process will be completed.

  You can also connect the USB on a different computer and try formatting.

• Flash DRIVE with U3 software-> how to format?

  Hello
  I use a Toshiba USB key, including the U3 software. This key is very slow.
  I can't remove the U3 sotfware. Could you explain how to format this key or remove U3 software
  Concerning

  Hello

  That would you say, do a right-click on the USB and choose the format.

  Will be before doing this check in the task manager what background process belongs to the U3 software and disable this process.
  Then try formatting the external device

• How to format a 8 GB SD card? (Windows XP) (ie. delete the already recorded videos)

  Windows XP formatting
  How to format a 8 GB SD card? (Windows XP) (ie. delete the already recorded videos)

  Best bet... map format the SD card in your camera.
  Or... you can delete the files using the menu of the device.

  Or... If you can go to... Start / my computer... and
  the camera (connected by USB cable) or your
  the media player is recognized as a removable
  Drive... just right click on the drive letter and select
  Open or explore to display the directory of the
  SD card. Reach... Edition / select all / drop / delete.

• How to formate my sandisk 32GB pan drive

  before I make my bootable USB key, but now I want to format my USB. When I go to the format m pen drive it shows "this disc is well protected.

  Hello.

  Some readers of the pen have a physical switch that allows to lock write for her protection, so if possible take a look if your pen drive has such. In case there is such, then move the switch to unlock the pen and this should clear the write protection.

  If she doesn't, then you can try to format via the CMD. So that you can follow these steps:

  • Go to cmd, type diskpartand press ENTER.
  • After that type list disk, press ENTER.
  • Type select disk X (where X is the number of your drive appears as), press enter and type clean, press ENTER.
  • Once the category create primary partition, press ENTER, type format quick fs = ntfs, press ENTER, type assign letter = F (or the letter you want to assign to the player), press enter and type at last - exit.

  Hope this helps and let me know how it went. :)

• HOW TO FORMAT A FILE SYSTEM RAW PEN DRIVE TO THE FAT32 FILE SYSTEM

  I have an of Sandisk USB key that is formatted by Místek in raw Format, so plaese tell me that how I can convert it from raw to fat 32 System. I await your response.

  Thank you.

  USB and SD drives readers are better formatted with a tool specifically designed for this purpose. HP has a tool with external USB drives in mind and can format FAT32 or NTFS. Looking for a. EXE file downloaded from the Internet can be a bit daunting, so I downloaded the copy I use on my SkyDrive and made available on the link below.

  HPUSBDisk
  It is a stand-alone. EXE which requires no installation runs. Note that you need to provide administrator rights to use the above. This provides the elevated permissions necessary for formatting on a Windows 7 system.
  On a related note, DD disks must be formatted with a special formatting tool that keeps the reserved protected area that allows them is set (the S in SD). The best place for an SD card formatting tool is SDCard.org on the link below.
  Trainer of SD 4.0 for SD/SDHC/SDXC

• Disk utility seems different in El Capitan - how to format a Seagate HDD to my MacBookPro which now operates under El Capitan?

  Disk utility seems different in El Capitan - how to format a Seagate HDD to my MacBookPro which now operates under El Capitan?

  There is a sharing on the top button. Select the Seagate to reformat.

• How to format an external hard drive in el capitan

  How to format an external hard drive in el capitan?

  I have a new iMac and bought a WD 2 TB hard drive. The manual says that I have to reformat the hard disk to use it with OS X.

  I opened the disk utility program, but there is no button to format the hard drive.

  How can I manage to reformat the hard drive?

  Select the external drive, and then click clear. Format Mac OS Extended journaled. If you want the drive to be bootable partition with the Guid partition scheme.

• How to format Vista and install Xp on Satellite P300?

  Hello

  I have Toshiba Satellite P300-1GQ with Vista Home Premium installed.
  But now I want to format the drive and put a new installation of Windows XP on it. I have my XP CD, I start it s loading the files and when it ends and says windows starts now so I can start to format and then install a new windows it gives me a blue screen saying windows found problems and stopped.

  It says to check the hard drive or a virus and try again. I did a lot of time checking everything, but nothing has changed. My windows locked and I can't get in shape? Question: How can I format them?

  Everyone please help. My CD of Windows XP Home edition works well I checked it if it s not my drive he owes me something on the laptop? Any ideas?

  You are using Windows XP Home SP2 installations CD edition?
  You have loaded the SATA drivers?

  One more thing: before you start the installation of Windows XP Home edition, did you create a Vista recovery media?

• How to format the HDD on my Satellite C855 1GQ

  I have a Toshiba Satellite C855 1GQ.
  How to format my HARD drive for your help thanks.

  Hello

  I don't know what you want to do exactly. HARD disk can be formatted before installing original recovery image that you got with your machine but also if you want to install the version of the OS.

  If you created the recovery disc you can format the HARD drive by using one of the available options (erase the hard drive) - http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm
  In the case you want to use the installation of Microsoft at the beginning of the installation disc disc HARD current will be shown. You have the option to delete existing partitions, create new partitions and install the Windows operating system.

  Please let us know what you want to do exactly.

• How to format Mac Pro 12-Core OS Original 2012?

  My friend has a Mac Pro 12-Core 2012 is the model MD771LL/A. I know it's 4 years but how I format it to its original operating system?

  The original was v10.8 for Mac OS X Lion of the mountains.

  Do I need a product key? To reformat?

  Click here and follow the instructions. No product or other authentication key is needed during the restoration of the original OS.

  (138791)

• HP Photosmart B110: Solutions Center installs - problems of usb - only wanted to scan - how to install the scanner part

  -With the help of HP Photosmart B110

  -Use of Tower/Desktop computer running Windows 7 64 bit

  Printer/Scanner connected via WiFi to router

  -Printer part works, I can print to this device

  -Scanner is accessible via the device Web page.

  I want the software of the scanner Solutions Center.

  I can't install the Solutions Center on Windows 7 64 bit. Setup stops and says that I have USB hardware and driver problems. USB on my Tower is USB2 and USB3 ports. Everything works perfectly and the Windows Device Manager has no problem with USB drivers/devices.

  How can I install the scanner software (or all of the Solutions Center software)?

  Tried to look in the folder for the files of instsaller scanner, nothing seems to work. (pulled other positions where it not install Solutions Center). Computer is working very well, so my only option at the moment is to look through the device's Web page, but it is not the best. And I would like to use the software. Also one third of the software "fax and scan" software and windows does not see the connected B110 (probably because it is on a network and not directly plugged into a usb port), so these two options came out.

  HP forum, help please. Is there a way to bypass the usb part? I use this device on a network. Windows 7 sees (even if only as a printer), so also want windows to consider it as a scanner as well.

  Thank you

  Hi @jedi11csa,

  Thank you very much to get back again.

  I just talked with a few colleagues in this regard, and this problem seems to be more a matter of Windows operating system, if the computer displays that USB related errors as well as the installation had not yet reached the point where it asks you to select your connection type.

  Maybe it's an investigation that is best suited for community Microsoft Forums as my resources have been exhausted in this respect.

  I hope that you are able to find the solution you need.

  Thank you.

• How to format the drive "C"?

  How to format my 'C' drive which is clear of all my files and programs? I want to sell my computer but don't want anything of mine on the disc.

  Hello

  You format the drive as part of the resettlement process.

  Do a clean reinstall of the operating system of your computer to the factory settings; State new, as it was purchased.

  But remember that nothing is definitively deleted; only the 'flag' to where the files are located is removed.

  It is a good program to use to wipe the hard drive of most of the attempts to access your information 'deleted '.

  http://www.DBAN.org/

  Then install the own.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  And if you have never received a recovery disk when you bought your computer, there should be a recovery on the drive Partition hard reinstall Windows how much you bought your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  See you soon.