USB boot with UEFI charger problem

Similar Questions

• Satellite P840: How to create the secure boot with UEFI Bios recovery disk

  Hello

  I have laptop P840 that came pre-installed with Windows 8, which I've upgraded to Windows 8 Pro.
  I then updated to Windows Pro 8.1 by Windows store. Please notify:

  1. how to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.

  2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  3. check partitions with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  Your help will be very appreciated.

  Best regards

  Romero

  I found your previous thread on this topic:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=74272

  > 1. How to create a DVD repair or start for windows 8.1 pro with UEFI Bios and boot secured.
  To be able to boot from sources other than the drive HARD internal, the boot mode must be set to the CSM and secure boot must be disabled!

  > 2. I created a USB recovery using the control panel in Windows Pro 8.1. It starts OK. It will be the same as that I've created using the Toshiba Media recovery creator or will it drivers Windows Pro 8.1?

  Your laptop has been preloaded with Win 8. Right? For example, the USB flash stick memory you just use the Toshiba Recovery media creator contains the Image of Toshiba with Windows 8. Don t mix this Toshiba image with the image that can be created using Microsoft's own backup and restore function. Both are different pictures!

  > 3. Check it with disk management, then 3 (450MO, 350 MB and GB 10.90) recovery partitions, 1 EFI system partition and 2 partitions primary (C: programs) and D: for data. I created the recovery DVD and USB 2 disks. Can I remove the 3 recovery partitions?

  The last partition contains the files on HARD drive recovery. Usually this partition will be created again when you use the Toshiba Recovery disk to put the laptop back to factory settings. So in the case where you n t need this files or the partition, you can delete

• Gigaware USB headset with microphone, has problems hearing Netflix on Firefox

  I have a gigaware usb headset with microphone.  I searched for the latest driver updates.  I am able to hear the system sounds, pandora on my helmet, but Netflix via firefox is still coming through the laptop speakers.  I use a toshiba satellite with windows Vista

  Hello

  1. have you checked if the problem occurs with other browsers?
  2. have you installed the latest drivers for your helmet?

  Check if the problem occurs with Internet Explorer.

  In addition, uninstall and reinstall the Silverlight player and check if it helps.

  You can post your request in the Mozilla Forums for assistance.

  Here is the link:
  http://www.Mozilla.org/about/forums/

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Creating a USB boot for el capitan

  Hello together,

  my macbook pro does´t work longer. The monitor during startup is gray and it does´t boot correctly. I wanted to create a USB boot with my mac and followed the instructions on the apple site. I wrote it in the terminal:

  sudo/Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume of 16 Volumes/STICKI-applicationpath/Applications/Install\ OS\ El\ Capitan.app X\

  STICKI 16 is the name of the usb key. Then I got the comment, I should check my device twice. It is possible, I have stop my Mac. I have Don t need of such a catastrophe. It s worse enough, that my macbook pro pro is down.

  Now I m uncertained.

  Here my question: do you have someone proceeded as above written successfully? Is there someone who has a good advice for me in this case?

  Sorry for my bad English, I left school 40 years ago.

  Thank´s for the good answers and greetings form Germany.

  Ralf Jacob

  These are the instructions I used:

  http://osxdaily.com/2015/09/30/create-OS-x-El-Capitan-boot-install-drive/

  Ciao.

• Problems when I want to update my complete system Mavericks using a USB key with the installation program.

  I want to "Refresh" my Mavericks home cleaning system and I still have a USB key with the complete installation program.

  With this USB key, I installed successfully already before Mavericks. Now, I want to repeat the installation by booting from USB key. But when the installation starts early an alert appears, said something like "... the verification failed - something is changed on the volume...". "and the cant of the installation continues.

  I've archived the original "OS X Mavericks installieren.app" from the app store and I have properly prepared another USB key using the terminal app, referencing the original installer, but I still get this alert when I try to install with this new USB.

  It is necessary for me to work with the Mavericks, because it's the latest version of the system on which I can run Adobe Creative Suite CS6 correctly. With the later versions of OS X, I get problems on my Mac Pro (end of 2008).

  I wonder what could happen with my first USB data, as I have already installed Mavericks successfully with it under the same conditions and after that he never touched the stick again so far. What can I do? What is the reason for this? Y at - there a site where I can get help or advice to solve the problem or if necessary can I re-download an Installer 'fresh '?

  Thank you and what is Berlin

  You can make a bootable USB to install using this free program that will do all the work for you. Try running disk utility/repair disk be before installation.

  Bootable USB Flash Drive-Diskmaker X

• USB boot option just don't not using uefi

  I am trying to install windows 7 64 bit. my hard disk partition type is TPG. But Usb boot option does not come in UEFI boot mode.

  If I choose the start for Legecy support option, then the usb option comes, but I want to install win 7 64 bit in the uefi.

  I have already created the USB bootable in uefi gpt mode by using diskpart as mentioned in other topics. Also tried with rufus.

  BIOS settings:

  G50 Lenovo 70

  Safe boot: disabled

  Start mode: uefi

  Quick start: disabled

  Boot USB: enabled

  Operating system optimized defults: other os.

  Format hard drive: TPG

  When I boot, only option "EFI PXE Network" comes. Not boot from usb option

  Help, please

  Thank you

  
  

• Create DIA USB boot UEFI?

  I have an E6440 with UEFI enabled in the bios.  I installed windows 7 64 bit Ent.  I installed DIA and created a USB and my captured image.  Now when I test the USB on the same E6440 with active UEFI, the USB IS NOT to appear in the start menu in "UEFI BOOT.

  what I've done wrong?  Why used to the USB that I create with show SLIDE upward with UEFI active?

  Tyler,

  When a USB stick is formatted for UEFi boot, it will appear in the boot under the heading "UEFI BOOT" menu.  I formatted USB key regular with "Rufus" that appear in the section 'UEFI BOOT' from the start menu, but the DIA USB created are not displayed in the "BOOT of the UEFI.

  My question is why don't the USB of DIA NE key appears in the section 'The UEFI BOOT' in the start menu, when it is formatted in fat32?

• Dell Inspiron 17R 5720 does not work with the charger. Charger is not recognized. No problem with charger.

  My Dell Inspiron 17R 5720 does not recognize charger. And unfortunately my warranty expired 2 months ago.
  It was plugged and work in the morning, but then in the afternoon I noticed he was running on battery only. It does not start without battery (charger just plugged).

  1 this is what I did to debug. Me and my brother, we bought the same computers Dell laptops at the same time a year and a bit ago. That's why a debugging purposes, it was good.
  I took my charger and plugged into his computer. And it works. Certainly not the charger problem I guess. And when I plug the charger my computer, green light is still on the charger. And I have the original charger provided with the laptop.

  2. now, laptop is running on battery only, so that means that this motherboard works. I think so.

  3. the next thing I did was charger disconnected and removed the battery from the laptop. Then I pushed and hold the "Power" button for 45 seconds to pay a royalty to the flea market. Charger plugged in but laptop will not start.

  4. then I booted the laptop on battery, went to the BIOS and check if the charger is recognized in the BIOS. No, it does not recognize charger. So, if this isn't a charger so what else can we?

  5 laptop has no strange smells so I don't know if something happened with the motherboard, but I guess that motherboard is ok because it works battery.

  6. I was thinking of updating the BIOS, but I can't do it, because it will be not be updated then the laptop runs on the battery, it needs to be plugged.

  Now I'm stuck. I don't know what I can do. I'm willing to spend a little more money on it to try to fix.

  If someone had such a problem in the past please let me know what you have done and if it fixed it.
  Or if anyone has any other ideas, I will be happy and appreciated the help.

  Hello and sorry for this late post. Just had this problem... If there is nothing wrong with the AC adapter, it's a software problem.

  Close the laptop... Unplug the AC adapter / CC... Remove the battery... Plug the power adapter... Start the laptop... Go to the control panel... Find and select the Device Manager... Batteries, left click... Uninstall Microsoft AC Adapter, uninstall Microsoft ACPI compatible with battery control method... In fact, uninstall all you can under the batteries, but that should be all there is. It will be re - install when starting... Stop cell phone... Remove the AC adapter / CC... Replace the battery... Plug the power adapter... Start the laptop... Now, everything should be good.

• Updated BIOS for a boot with USB (external)?

  I have a laptop of G50-104NR with Windows Vista Home Premium.

  It doesn't seem to be a BIOS update available at HP when you run the update from HP. As best I am able to determine, the BIOS does not support boot from an external USB device. Does anyone know of a source of an update of BIOS or other workaround to allow booting from a USB device?

  Thanks in advance.

  the update of hp does not always show the BIOS updates.

  Enter your product number in the search box at top right of this page, select software downloads and the pilot, then the OS you are using.

  you will then to the drivers page for your laptop.

  most of the newest BIOS of HP usb Boot support

• Where can I buy a usb key with thin cable for A500 for cell phone charger?

  Where can I buy a usb key with thin cable for A500 for cell phone charger? Or I can do?  Thanks for any help.

  The A500 uses 12VDC to load. USB use 5VDC. You could do a cable, but it wouldn't work because of differences in voltage. Sorry...

• I just finished my first computer, with Windows 7 USB boot, construction and now it asks for drivers.

  * Original title: drivers

  I just finished my first computer, with Windows 7 USB boot, construction and now it asks for drivers. help please?

  What drivers?

  Your hardware such as a video card may require pilots. Only you know what is in your version of the computer.

• I opened my laptop and I lit the charge then it shows connect to 65w adapter y at - it a problem with my charger?

  I opened my laptop and I lit the charge then it shows connect to 65w adapter y at - it a problem with my charger?

  I pressed the f1 key to continue, then my laptop recharges normally.

• Boot from CD/DVD with UEFI

  I found an article very useful Dell here:

  www.dell.com/.../en .

  It works fine on my new laptop Dell Inspiron, but I would like to know if it works on any PC with UEFI or just Dells.  The part that says add this to the boot sequence:

  Example: ' PciRoot (0 x 0) / (0x1F, 0 x 2) Pci / Sata (0x3, 0x0, 0x0) / CD " in particular makes me wonder.  Anyone know?  TIA

  No such thing as the bios all providers of all versions always matching and work forever.

  PciRoot (0x0) / (0x1F, 0 x 2) Pci / Sata (0x3, 0x0, 0x0) / CD is that specific model dell.

  Secure Boot works with 64-bit media and only 8, 8.1, or 10, or Ubuntu 12.04.5.

  F12 Boot Win7 requires CSM and Legacy Boot.   Grub in MBR BACK startup is not available TPG only boot with WIN7 64 bit.  16 and 32 bits of software DO NOT and DO WILL never start.

• Clean install Windows 7 with UEFI in dv6-7215nr

  Hi, I would like to do a clean install of my HP dv6-7215nr Windows 7 Enterprise SP1 x 64 envy laptop.

  To this end, I have 3 questions to solve some installation issues.

  1. What are the steps to clean install Windows 7 SP1 Enterprise intact in UEFI mode?

  I tried to install Win 7 after the pre-requisites following:

  (a) not partitioned 200 GB free space on the disk (only 1 physical disk)

  (b) already installed Windows 8 files with UEFI

  (c) UEFI enabled

  (d) heritage disabled startup

  (e) secure boot disabled

  When I Boot in UEFI of CD/DVD, I can't switch to the Windows startup screen, it just hangs. What I am doing wrong? Is there any other prerequisites that I don't know?

  I tried to install UEFI with Legacy enabled Boot, and I installed win7 but I can't disable Legacy new Boot because Win7 boot and I want only the UEFI Boot and need for inheritance disabled.

  2. where can I download drivers for Windows 7 for my laptop?

  I found this topic:

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-envy-DV6-7210ei-downgrade-fr...

  They point to these drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us & dlc = in & lc = in & product = 5273735 & task = &

  I think I could use these drivers, but I need just in case where. I guess they should work as the product names are roughly similar (with mine).

  3. is it possible to Secure Boot with Windows 7 SP1?

  I have no research on this so far.

  Thanks for the help that someone in the community can give to me, it is not important all the problems that I have set in I can still do research on questions 2 and 3 and help others with my research if I can do it before a response. Any info you can give me will be too great.

  Carlos

  (1) ' secure Boot' must be DISABLED and 'Legacy Support' must be ENABLED to install Windows 7 and many other older operating systems. The bootable media must support UEFI boot to install on a GPT-partitioned drive.

  You let people with DISABILITIES 'Secure Boot' (and 'Legacy Support' ENABLED) once you have installed Windows 7. Changing these options causes Windows 7 to start is no longer.

  (2) the Windows 7 drivers on the CTO Entertainment Notebook PC drivers HP Pavilion dv7t-7000 page you referenced, will work on your computer.

  (3) it is not possible to install or use Windows 7 with "Secure Boot" ACTIVE.

  WARNING *.

  HP does not recommend installing Windows 7 on a consumer computer comes with Windows 8, and it will support the installation of Windows 7. HP cannot provide the drivers for Windows 7 and the appropriate drivers are not available for the hardware in the computer. In addition, Windows 7 can not take in charge some of the hardware or software designed for the computer.

  Make sure you create your media recovery HP or USB Flash Recovery discs before you edit or change anything.

  You will need to DISABLE 'Secure Boot' and ENABLE 'Legacy Support' in the 'Configuration of the BIOS start-up secured' on the page parameters below, until you try to install Windows 7.

  

  In addition, as the hard drive is probably partitioned as TPG, you must start the computer by using the "UEFI - CD/DVD drive" or "UEFI - USB Flash drive" options in the boot menu "F9". If "UEFI - CD/DVD drive", "UEFI - USB Flash drive" or something to that effect does not exist in the start menu, please post a screenshot and/or make startup listed options.

  I suggest using Windows 7 SP1 for the best installation experience. If you need Windows SP1, see 'How to install Windows 7 without the disc' to download and create your own disc of Windows 7 SP1. If the DVD does not start as UEFI, you may need to use a USB Flash drive (can ask "Quick start" DISABLING in BIOS) as the installation media. Please download the Windows 7 USB/DVD download tool to create a Windows 7 SP1 USB Flash drive. Please note that some computers may not recognize a valid active UEFI USB Flash drive if it is formatted in NTFS and may require only a FAT32 formatted USB Flash drive. You should be able to make a FAT32 formatted Windows 7 installation USB Flash drive using Rufus, UNetbootin, Universal USB Installeror WiNToBootic. I like Rufus, because it contains options for 'Plan of GPT partition for UEFI computer' and 'FAT32'.

  If you have missing or unknown devices after installing the drivers, please post to the "Hardware ID" Device Manager (just the text string will do) to these devices as shown in the example below.

  

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• HP EliteBook 820 G3: HP EliteBook 820 G3 - no USB Boot

  Hello

  I have a HP EliteBook 820 G3 which was working fine a few days ago and now I can't boot from a USB key.

  I put the USB Boot BIOS and any type of USB, I try and no matter what USB Port I try I can not show USB boot F9 option menu.

  The stick, I'm trying to start is a stick of SCCM Boot to BIOS devices (non-uefi).

  I tried a fomatted UEFI, one to make sure that it was not the problem and it made no difference.

  In my cube, I have a ton of HP hardware and all begin this exact stick even without problem.

  But even if the stick did not form correctly it should still show USB as an option in the Menu start with the BIOS configured to boot from it.

  I have reset the BIOS settings, I disabled the USB Boot box then restarted and places back.

  I have flashed the BIOS to the latest version and that made no difference.

  When the machine starts the operating system correctly shows the contents of the flash player.

  Anyone have any ideas?

  Thanks in advance!

  False problem.

  A factory more reset BIOS seems to have understood that it works.