USB devices not recognized after exiting standby

Similar Questions

• Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

  Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

  Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.

• USB device not recognized (Nothing plugged and the mouse does not)

  My mouse (microsoft) wireless worked well until what within hours.
  then I said to unrecognized USB device
  The port works, but for some reason any
  the mouse is not, went bought another mouse and still getting the same message.
  Plus I get the USB device not recognized pop up, same
  Tho, nothing is plugged into one of the USB ports.
  Any suggestions on how to solve this problem

  Computer brand and model?  Windows OS?

  Open the Device Manager

  Click on the + sign next to USB controllers

  Do you not see that unknown device listed?

  Right click on the playlists of USB root hub

  Select uninstall

  Close Device Manager

  Restart the computer to Windows reload the drivers

  USB is now recognized?

  If failed, shutdown computer.  Unplug it from the electrical outlet.  Leave unplugged for 1 to 2 minutes.  Plug the unit in and restart the computer.

  USB is now recognized?

  How to troubleshoot USB device problems that can occur after a laptop computer that is running Windows Vista recovery from sleep or standby extended

  http://support.Microsoft.com/kb/953367

  Windows Vista does not recognize a USB external optical disc drive when you reconnect the USB optical drive to the computer drive

  http://support.Microsoft.com/kb/944292

  Run the System File Checker

  Right-click on command prompt and select run as administrator

  Type sfc/scannow

  Press enter

  Note: there is a space between sfc and / scannow

  How to analyze the log generated by the SFC Scan file:
  http://support.Microsoft.com/kb/928228

• His number disappointed + B500 USB device not recognized at startup

  Hello

  We have 2 B500

  whenever I'm starting, after loading windows they give me an error "USB device not recognized" I don't know what to do any help will be greatly appreciated as it is strange that both machines are giving the same error.

  also on one of the machines the sound does not work, I tried to get out of trouble, the diagnostic says the speakers are working properly, but not her out at all.

  I'm kind of disappointed by these questions, we always buy at Dell, but we thought we would give Lenovo a chance, the machines were barely a few months, when the problem started.

  advice please?

  That error usually comes up when a non bootable USB device is connected. Check the Bios and make sure that the CD drive and HARD drive are loading first. That should solve your problem. If this is not the case, make sure that you don't have any USB stick or disk external HARD connected until the PC load.

• Satellite L30: Usb device not recognized

  I have a problem with my laptop L30.
  When I connect my phone or a flash drive or external hard drive, it is said: Usb device not recognized one of the usb devices malfunctioned.
  Tried to reinstall windows did not help...

  is there a solution?

  Hello

  Hmm. First of all, you should unplug all external USB devices.
  Then go to Device Manager and remove it all concentrators root USB and USB host controllers.
  Reboot the laptop.

  After this procedure, the operating system should recognize and should install new ports.
  Now you can connect to a plug - and play instruments. These devices should be recognized automatically. But some external USB devices need additional drivers.
  Usually these drivers are provided with the USB device.

  I would recommend this review if necessary!

• USb device not recognized / Power surge on hub port

  I don't have the slightest idea what happened here, but when I plug my defy in a PC all I get is 'USB device not recognized '.

  and I can't connect to usingf a P.C.

  Ive tried to re-satring the phone and the PC, ive tried also in another PC and it did the same "USB device not recognized"

  Ive tried to download the drivers, restart Phone bot and Paolo and still "USB device" unrecognized on the two p.cs.

  Ive also tried the USB debugging on the phone mode, but after a short pause, "Unrecognized USB device"

  
  

• USB Device not recognized Hp OfficeJet 6600

  Hello all - I use my desktop Hp 6600 (connected via usb) jet and my computer (dell E6430 latitude) says that it is a usb device not recognized.  I tried a lot of troubleshooting, including the removal of usb controllers and reinstall, but which doesn't seem to work.  I'd like to help as soon as POSSIBLE. Again, I must keep my printer cable, because the network, I refuse the acess printers or something like that.

  Thank you

  J

  Hello

  If I understand correctly your computer does not detect the printer. You can try the following steps and check the results.

  1) inspect the cable USB and connection:- icon on the USB () facing up when the cable is connected to the product correctly. Check the back of your product and the back of your computer to make sure that the USB cable connects correctly and safely. After that you make sure that the USB cable connects correctly and safely, consider the following guidelines to check other potential problems associated with USB: Connect any other USB device. Connect any other USB device to the computer and check if it is detected. USB ports on the keyboard. USB ports on the keyboard and on the front of some computers is maybe not powerful enough to support the product. If the USB cable connects to the USB port on the keyboard, try to connect to it in another USB port on the computer. Length of the cable USB. HP recommends that the lower USB cables or equal to 5 m (16 ft 5 in) long. However, a USB cable which is 5 m (16 ft 5 in) in length must be of high quality. Otherwise, HP recommends using a USB cable that is less than 2 m (3 ft 3 in). Do not use connection cables to increase the length of the cable. Use a powered USB hub, if you need more length. USB ports replacing. Connect the USB cable to a different port on the computer to make sure that the USB port on the computer is not the cause of the problem. Defective USB cable. Replace the USB cable to ensure that the existing cable is not defective. Conflicting USB ports. Disconnect all other USB, USB, USB cameras scanners printers and all other connected USB devices. Start the connection of these devices one at a time to determine if the devices to use too much power. Plan to buy and install a hub USB powered if necessary. (2) power Off and power of the device. (3) update the Windows Device Manager: (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens. (b) in the Open text box, type devmgmt.msc and press ENTER. The Windows Device Manager opens. (c) lists to look for your HP printer in Bus USB controllers or other devices . (d) right click on the entry for device to device/unknown HP and then click on set to update driver. The material up to date hospitality Assistant opens. (e) select install the software automatically and click Next. Follow the on-screen instructions to complete the refresh Device Manager. (f) repeat these s for all entries of device with a yellow exclamation point. (4) delete the temporary files and folders. (5) disable some startup items: -. (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens. (b) in the Open box, type msconfig, and click OK. The System Configuration Utility window opens. (a) click on the general tab, click Selective startup. (b) if there is a check next to load startup items, select the check box to remove it. (c) click on the Services tab and then click on the hide all Microsoft Services check box.

  (d) click Disable all.

  (e) click on apply and then click Close.

  (f) restart the computer.

  (6) make sure that the Plug-and-Play Service is activated: -.

  (a) click Start (for Windows XP) or the Windows Logo (for Windows Vista and 7), and then click run. The run window opens.

  (b) in the Open box, type services.msc, and then click OK. The Services window opens.

  (c) to seek the 'Plug-and-Play services' and check if the status is started.

  (d) if the status is not started, then right-click on it and select start.

  (e) once on the way out of the window.

  (7) uninstall and reinstall the printer software.

  (8) re-enable the startup programs: -.

  (a) click Startand then click run. The run window opens.

  (b) in the Open box, type msconfig, and click OK. The System Configuration utility window opens.

  (c) click the general tab, click Normal startup.

  (d) click the Services tab, and then select the hide all Microsoft Services check box.

  (e) click applyand then click close.

  (f) click on reboot to apply the changes to the next time the computer starts.

  (9) try to install the software on another computer.

  Although I am an employee of HP, I speak for myself and not for HP.

  -Say 'Thank you' by clicking on the star of congratulations in the post helped you.
  -Please indicate the position that solved your problem as "accepted Solution".

• USB problem-"USB device not recognized".

  Original title: USB problem

  I have a problem when I connect my nokia mobile to my pc via USB cable there is a display of msg of error "USB device not recognized.how to solve this problem? I tried all reboot pc, reconnect the device, format XP and reinstall.last night I was using a mobile navigation correctly with the same device same system same cable.i have tried driver re install but not fixed yet.i have Windows XP 3 intel p4.please help.

  Hello

  1. Are you having the same problem if you connect a drive flash or any other device?
  2. Have you tried plugging in Nokia mobile on another computer?
  3. Have you tried plugging it into different USB ports?

  I suggest you send more information to help you better.

  You can also refer to:

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive.

  http://support.Microsoft.com/kb/925196

  USB port may stop working after you remove or insert a USB device.

  http://support.Microsoft.com/kb/817900

  .

• USB printer not recognized after Windows update

  OT: usb device not recognized

  After that suddenly stop, reboot, done, the device is plugged in where the printer indicates that it does not recognize the device. I said abattissent unplug it and reconnect it and if it doesn't work me to replace... I re install the driver for the Hpdeskjet940c but nothing works...

  Hello grasshopper.

  This problem may be caused mainly by broken printer drivers, this could have been caused when you installed the updates. I suggest that you start with a restoration of the system on the computer by choosing a restore point when it was working fine.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can see the following article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also try driver restore on the computer and check if it helps.

  To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

  a. open the Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

  b. right click on the device for which the previous version of the driver is desired and then click Properties.

  c. click the tab drivers.

  d. click on Roll Back Driver.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• USB device not recognized when I connect my iphone to my computer

  Original title: USB device not recognized

  I get the error message "Unrecognized USB device" when I connect my iphone to my computer.  It is the same as the one I use for months.  Same computer.  Same sync cable.  I have changed everything, including hang iphone to my wife instead of mine and get the same message.  I also did a restore on my computer that doesn't change anything.

  Hello

  At this point, I think it's a good idea to run a scan for viruses/malware on the PC with the anti-virus software that you have installed.

  Also, if you haven't already, I would try removing the USB controllers and restart again, now that the updates of Windows are installed. Don't forget, you can even download the drivers directly from manufacturer support site for your PC, if they install automatically when you restart after their removal.

  Finally, take a look at the thread I linked below. The first answer is quite similar to that mentioned above in this thread, but there are also a few other really good measures listed there as well. Then take a look at the linked thread and see if that helps at all.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/USB-device-not-recognized-in-Windows-7/8106a712-A13E-4ca5-b82e-c3961cc254b1

• USB device not recognized in windows 7

  USB device not recognized in windows 7

  Hi eyadOdetallah,

  -Is the issue specific to a particular USB device?

  -What software changes you did on the computer before the show?

  Follow the steps below:

  Method 1:

  Run the hardware and devices Troubleshooter to run the automated troubleshooting services.

  Open the hardware and devices Troubleshooter

  Disable and re-enable all the USB controllers.

  Method 2:

  This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  To disable and re-enable the USB controllers, follow these steps:

  a. Open the Device Manager.

  b. expand Bus USB controllers.
  
  Note that you have to scroll down to find this point.

  c. right-click on the first USB controller under Bus USB controllersand then click Uninstall to remove it.

  d. Repeat steps above for each controller USB is listed under Bus USB controllers.

  e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

• Problem of "USB device not recognized... "with syncing Treo 750

  "USB device not recognized - one of a mulfunctioned USB devices" - this sign always appears when I sync my Treo 750. After a few attempts WM Device Center finally can 'see' Treo and this sign disappears. What I supposed to do? Find a driver for Treo or what? Could someone help me please?

  In your 750, go to start > programs > USB to PC. There, you will see a check box. If it is not checked, check it, if it is checked, uncheck it. After that try to sync your device to your PC and let me know what happens.

  Message is about: Treo 800w (Sprint)

• PRS-600 USB device not recognized

  I am unable to get ereader PRS-600 to be recognized by the computer (Win7).
  I tried to update the software (even if I think it's in)
  (date) but the window 'connect a PRS-600 to update' does not progress and the update button is dimmed.
  I deleted the "unknown device" in the drivers, but when I reconnect the USB cable and the ereader, I always get the display of device not recognized and the message "USB device not recognized".

  I seem to have solved the problem. I contacted Sony through esupport and a chat with a tech.

  Make sure that the battery has some charge inside. Completely charge if you can.
  Stop eReader (fully)
  Remove the SD card
  Press the button Reset (at the bottom of the ereader)
  Turn it on
  While the display shows "Open book", at the same time press the button to "turn the page" (back) and the Volume button until the "Reset All" + screen
  Enter 'Yes' to reset the ereader. You may need to configure the screen (X button with the tip to draw at various points)
  If you charge the battery, you may need to contact the support chat for sorting.

  Good luck!

• USB device not recognized. unknown device

  USB device not recognized, peripheral unknown.  I can not connect any USB

  If no USB device does not is that you need to install drivers of motherboard (chipset) or your USB ports on the motherboard failed. Since you have told us nothing about your computer, it's as specific as I can get. See the links in general troubleshooting below and if they do not help, post back with the missing information by:

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting USB by Uwe Sieber -http://www.uwe-sieber.de/usbtrouble_e.html

  General USB troubleshooting in Windows XP -http://support.microsoft.com/?kbid=310575

  MS - MVP - Elephant Boy computers - don't panic!

• How do I update driver for printer Epson Stylus C43 Color inkjet (USB device not recognized)

  I run Windows XP Home Edition and have a printer Epson Stylus C43UX Color.  Quite often, the printer connects, is recognized by my laptop and works very well, but sometimes, when I connect and turn on the printer, I get a ball on the toolbar "USB device not recognized" State the Device Manager shows the printer as an unknown device and in the State of the device properties is no indication 'no driver installed for this device.  I uninstalled drivers and enforcement "Looking for new hardware" menu Action of the Device Manager has received the balloon message "new hardware found: your hardware is installed and ready to use. Try to then print the results in a "Communication error" message and the printer fails to print.

  Hello

  
  You did changes to the computer before the show?

  Method 1:
  Try the steps in the link and check.
  Advanced troubleshooting tips for General USB for Windows XP problems
  http://support.Microsoft.com/kb/310575

  Method 2:
  You can update the drivers on the manufacturer's Web site and check.
  See the link to update the driver:
  How to manage devices in Windows XP
  http://support.Microsoft.com/kb/283658
  Manufacturer link:
  http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp?BV_UseBVCookie=Yes

  Method 3:
  Try the steps from the link and check if you are able to print.
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows