USB drive is not Accessible

Similar Questions

• My USB drive is "not accessible". My camera is "not accessible". What is going on?

  When I plug in my flash drive to my usb ports that nothing happens.  When I go to the library and click on the drive that I get so bad "inaccessible", "access denied" message.  Same thing when I plug in my camera.  Any port that I use is the same.  When I put my SD card in the port, it will be not open either - same message.  Help is appreciated.

  Hi Ryan,

  1. would not be detected devices on the PC?

  2. have you made any hardware or software replaces the PC before this problem?

  I understand that you are getting access denied message when you try to access the files from the disk drive or USB card.

  I suggest you to follow these steps and check.
  a. press the Windows key + X and choose command prompt (Admin)
  b. type takeown /F (external drive letter) and press ENTER.
  c. again, tap CACLS (external drive letter) /G Administrator: F and press ENTER.
  d. restart the computer and test the issue.

  See also: you may need to change the permissions of folders or files.
  "Access denied" or other errors in the access to or work with files and folders in Windows
  http://support.Microsoft.com/kb/2623670/en-us

  Let us know if it helps.  If the problem persists, please answer, we will be happy to help you.

• MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "

  Hello

  So, here are the problems I encounter, and what I did to try to fix myself.
  Whenever I try to connect my MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "  This same thing happens everytime I try to put an SD card in the SD card slot.  However, despite this, I can plug my USB mouse and use it, as well as the keyboard and it records only.  I can also use the HDMI port to use my TV as a second monitor and, also, to record that.
  What I did to solve the problem, it is to restore the system to the previous times before that happened, did not.  I also went into the Device Manager and uninstalled and re installed, USB and SD card drivers.  I also tried something in the sense of taking control of the files via a right click on a folder and go to properties and then security and to the 'advanced settings', the problem with this situation is that I can't in readers at all.
  I am currently running Windows 7 (64 bit) on a laptop Lenovo, the computer itself is actually only a few months.  If someone knows something about this, please let me know.  Thanks in advance.

  Hello

  1. What is the number of brands and models of MP3 player?

  2 are logged in as an administrator on the computer?

  3. are you able to use this device on another computer (not Windows XP)? The MP3 player or SD card already worked on this computer?

  4. Once you get this error message? Do you get this error when accessing the mp3 player and SD card on Windows Explorer?

  Run an antivirus with Microsoft Safety scanner scan and make sure your computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

  Response with more information to help you.

• On Satellite A100 DVD drive is not accessible - i/o device error

  I have a Satellite A100 - 01 G, but the CD/DVD drive is not accessible when I try to open the files on a disc. When I try to run a disc I ge "the request cannot be performed an i/o device error.
  When I click on the drive icon it says that the application is not found.

  Help, please.
  Thank you

  Hello

  Have you tried to update the CD/DVD drive?
  You could go to the Device Manager and could remove the reader of CD/DVD from the list of devices.
  Then, you must restart the laptop.
  After restarting again the Windows operating system will recognize the new device as the CD/DVD drive and will initialize and reinstall the driver.

  Then try using the new CD/DVD drive

• USB driver is not support for HP Deskjet 1050 j410a.

  My HP Deskjet 1050 j410a is installed on a windows 7 and show a code 37 error message which means usb driver is not supported. I had reinstalled so many times and also restarted the pc but the problem does not resolve itself. kindly help me to solve this problem.

  Hello

  Make sure you first upgrade the driver by uninstalling the HP software and install the latest version below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-109412-2&cc=us&DLC=en&LC=en&OS=4062&product=4027465&sw_lang=

  If the same continues to try to plug the USB key into a different port on the PC and check any change.

  Then try another device (for example, the disk on the key) and check if you can see a similar behavior, if so the problem may be with your PC Chipset problem.

  If the issue appears only on the Deskjet 1050 and no step has not resolve the problem, try an another USB cable from the printer and check any change.

  Shlomi

• c:\ drive is not accessible access is denied

  my hard c:\ drive is not accessible access is denied my restore says system c:\windows\system32\rstui.exe the parameter is incorect I can't change my account I can't download need help

  I fixed it myself without access to drive c and with finding my lost vista cd.  I partitioned a space on my 2nd hard drive were I have installed windows 7 rc that I could find. then I completely lost my vista at startup program but was finally able to access the c drive was I changed the owner and reset the permissions {sweet}, then I downloaded the vista startup and repair cd {freebie} rebooted from the cd, he fixed the restarted start menu and was able to see my vista who temporarily lost started it and I ended up controll full return it downloads updates etc. just as it has done before my vista nightmare now, everything has been left a hard drive #2 I copied everything that was on the vista partition and it moves on the drive c in its own new folder then reformatted the drive d {drive #2] which left me with a clean drive were I was able to bring back every thing and worked.} I ' m sure that there was probably an easier way, but being able to find my vista cd and have very limited access to my vista program there were no alternative short bought another operating system and lose everything that I already had on my computer. "  6 weeks waiting for a response time was bad enough

• No matter how much hard drive space or size is not displayed. It says hard drive is not accessible and the cyclic redundancy error.

  * Original title: hard drive problem

  No matter how much hard drive space or size is not displayed. It says hard drive is not accessible and the cyclic redundancy error. When I try to format it, it says windows could not finish.

  What just happened? How can I solve this problem?

  It says hard drive is not accessible and the cyclic redundancy error. How can I solve this problem?

  Sorry, you can not. A CRC error means that there is a serious problem with your drive. You need to replace it.

• My digital camcorder Panasonic NV-GS11 USB driver is not compatible with my Windows 7 OS

  * - Original title - programs Application Applications App Apps games inherited Freedoms (e) (s) hang crashes aren't more answers like

  My "digital video camera", Panasonic NV-GS11 can't work with my PC because the 'USB Driver' is incompatible with the Windows 7 OS. Please help me! Thank you.
  My digital camcorder Panasonic NV-GS11 USB driver is not compatible with my Windows 7 operating system. Please help me! Thank you.

  Hi John,.

  I see that the usb for digital camera driver is not compatible with windows 7. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4 is the issue limited to usb drivers?

  Method 1.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2.

  Installing the driver in compatibility mode and check.

  Make sure to run older programs in this version of Windows: http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  Method 3.

  Install a USB device: http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Try these steps and let us know the status.

  Thank you.

• My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports.

  My WD 3 USB drive does not work in the 3 USB Ports on my Lenovo W530 lap. But work in the regular ports. What can I do to fix this?

  Do not use windows update for drivers.

  Update your drivers Lenovo support and see if that helps

  If the lenovo is new, you can contact Lenovo support to asertain why usb3 ports apparently do not work

• GUARANTEED 500 GB drive hard-Nomad crash-request Format-Drive is not accessible

  Hello
  I recently purchased (2 weeks) a SECURED 500 GB.
  PX16668E-1HEO - 3a274187ag
  and I used it gently to transfer data between computers.

  The application of Nomad crashed my last usable session and does not close correctly.

  When I try to log in now
  just after typing the password,.
  He asks me:
  +-Installer/Activer mobile application
  and then
  -format the drive, since it may not recognise. +

  Currently from the windows Explorer, I can see them both:
  the part of d (g) + Player
  the Local (h) + Player

  If I access it from windows Explorer:
  + H:\ is not accessible
  the device is not ready.
  and data is not accessible (disaster)

  computer management/storage/disk
  +(H:) est marqué comme étant en bonne santé, actif mais sans système de fichiers et 100 % gratuite (un peu effrayant) +)

  the drive has been used on Vista and XP.

  I would really appreciate anyone tell me a way out.
  Thank you

  See you soon

  Hey, man

  To be honest, I don't know GOT 500 GB of hard drive, but why you don't want to get in shape or you have something important here...

• External drive is not accessible by Time Machine or disk utility

  I have a USB drive connected on my MAC (OS X El Capitan) the drive has 3 partitions, one is used for bacp of documents (200 GB), empty (300 GB) and for the backup copies made with Time Machine (300 GB). Since yesterday, Time machine does recognize more the drive for the installation of the most recent reserve backup copy, The Time Machine, the disk partition is also not found by Finder and when the drive is connected via USB to the MAC, disk utility does not but rest in mode search, without giving any information.

  The MAC system information indicates that all the three partitions connected via the USB bus, ar

  I can't remove the disks with the indications of the boom, but when I remove them physically a warning I thay sgiven the duisk has been removed as not appropriate.

  I think that something is wrong with the partitioning of the disk, but I see no way to retrieve the disc.

  Does have same problem or if it can indicate a path to a solution of the problem.

  Stop

  Remove all external devices except the keyboard and mouse

  Restart and rest the PRAM

  How to reset the NVRAM on your Mac - Apple Support

  start in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  Reconnect the drive (and any other external devices)

  If the disc is not visible in disk utility, you can try to connect to another computer and check it or reformat if all else fails.

  a disc formatted in anything other than extended journaled Mac will not be usable with Time Machine. If you need to reformat the drive in NTFS or FAT or ExFat, format Windows PC then reconnect to the mac, once the drive is recognized, reformat with extended Mac.

  It is also possible that the drive is dead. If it is still under warranty it can be replaced, but manufacturers don't offer a premium-free data recovery. see the manufacturer's Web site. you will need the serial number of the drive.

• Satellite - D drive is not accessible

  Hi, I am trying to copy files to a disk for backup purposes, but I get a message error "D:\ is not accessible. incorrect function. Enyone help? Surely, it must be possible to copy files on a disk.

  What satellite notebook you have exactly and what drive are you trying to copy?
  It's a Toshiba recovery CD?

• Satellite Pro A200 - CD/DVD question - D:\ drive is not accessible

  Hello

  No one knows what may be the cause of this problem - when I put a disc into my laptop to install the new sotware - I see the following error message:

  "D:\ is not accessible."

  The request could not be performed because of an i/o error. "

  Thank you

  Kristian

  I can provide a possible solution that has worked for many others:

  Go to Device Manager and remove the drive from the list of devices CD/DVD.
  Then start the registry (regedit) and delete the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart your machine and windows will install the drive again. Check if it worked for you.

• lgvm670 android USB driver do not settle

  the driver for lgvm670 USB android does not settle and cannot be found by the computer, I also try the LG site and they do not have the driver, I spoke on the phone with LG tech.support, and they were unable to help him. Any ideas?, I'll appreciate. Tanks

  HI cxt5510,

  The windows Compatibility Web site saying your phone is compatible, but it is free to download required. Check out the link provided below, scroll and click on the "update software" tab to download the usb driver for windows.

  http://www.LG.com/us/support-mobile/LG-VM670

  Let us know if this helped.

• USB drive is not showing in "My Computer".

  I use my USB key for a long time... and this is the first time that he s showing this problem... I formatted the USB and can't remember... for example NTFS or FAT format... after foratting every time I insert this USB into the usb ports there is a sound that something is inserted in the usb ports on the laptop... but it does not appear on MY computer... Although other keys are workin on my laptop...

  Hi John,.

  1. are you able to view the Flash DRIVE in disk management?

  2. What is the operating system installed on your computer?

  I suggest you to follow the steps and check if it helps.

  Method 1: If you are able to see the Pen Drive under disk management, check the format of the USB and after return,

  Change, add, or remove a drive letter

  Method 2: Check the status of the device your pen drive and after return to the status updated.

  (a) click Start.

  (b) type device manager in the start search box, and then open it.

  (c) check that the device is listed there.

  (d) right click on the device, and then click Properties.

  (e) on the general tab, check the status of the device.

  Method 3: Alternatively, you can try to plug the USB stick on another computer and check if it helps.

  Method 4: If you use Windows XP as the operating system, you can follow the steps from the link and check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Method 5: You can also check out the link and check if it helps.

  My drive does not appear in Windows Explorer