USB enclosure for HDD GB 900

Similar Questions

• Transfer of old XP files and settings to new XP using a USB enclosure.

  Main map of my old XP computer died.  My new (refurbished) computer has an ATA hard drive, but old did an EIDE hard drive.

  I want to transfer files and settings, etc. from my old hard drive (now in a USB enclosure) on my new computer.

  The problem is to execute the transfer Assistant, I need to start Windows on the USB HDD and I can't.

  Is there a way to do this or what I try and do it manually?

  Currently running on the computer Dell Optiplex 740 current XP sp3

  Old hard drive is Western Digital Caviar Blue 500 GB that has XP sp3 on it.

  Thanks in advance, Al

  I'm sorry, but you cannot use the wizard to transfer settings and files for it.  You must do it manually.  The new computer must assign a drive letter to the old drive when it is connected. Boulder computer Maven
  Most Microsoft Valuable Professional

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

• USB drivers for HP50g on Windows 8 (64-bit)

  Hi all

  Has anyone tried installing the USB drivers for the 50g on Windows 8?

  Conn4x installed well but USB drivers comes. I tried all available troubleshooting options using the features of Windows 8 compatibility (XP, Vista and 7) and none of them worked.

  So I was wondering, maybe someone here may have already installed and could share some tips.

  Thank you

  Márcio

  I read messages in other forums indicating that the conn4x and the USB driver peut be installed.

  The post on the forum indicated that Windows 8 comes pre-configured with the possibility for signed drivers enabledapplication.

  In order to install the USB driver, signed driver enforcement must be disabled.

  See this forum comp.sys.hp48 post it here:

  https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/win$208/comp.sys.HP48/tzpjXzysXrU/-XZbRLN2CucJ

  Please inform the forum if you succeed, and what measures allowing you to complete the installation.

• Need USB drivers for old Equium L40 - 10U PSL41E running Vista 32-bit

  Hi all

  I think that my USB driver is corrupted. I found the ChipSet, LAN and BIOS drivers for my old PSL41E Equium L40 - 10U running Vista 32 bit. However, I have not found the USB drives I need. USB drivers are contained in the ChipSet, BIOS or LAN driver?

  If not, where can I find and download the USB drivers for my old old Equium L40 - 10U PSL41E running Vista 32 bit?

  Thank you! -Le Cannet

  Here is where I found the drivers (but with no mention of USB drivers):
  [Drivers Equium L40 - 10U PSL41E | http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=8 & selFamily = 391 & selSeries = 326 & selProduct = 752 & selSho rtMod = 541 & language = 13 & selOS = 26 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 8 & pa ge 1 = & startPage = 1 & prevCl = true]

  > Are contained in the ChipSet, BIOS or LAN USB drivers driver?

  USB drivers are part of the Windows operating system.
  The USB ports should work after the installation of the Windows operating system and, therefore, there is no such thing as a USB driver for the USB 2.0 standard.

  In addition, the chipset driver must be installed.

  I checked the proposed link in your ad and here, you can download the Intel chipset utility.
  The update of the BIOS is also available

• Converter USB/serial for Satellite P100-112

  Hi, I need to buy a converter usb/serial for my P100-112. The one I have, I can't make it work with my current machine. Tips for what to buy would be appreciated.

  Hey Buddy,

  I googled a bit around and found an example for a converter that can be useful for you:

  http://www.ramelectronics.NET/HTML/usb_serial.htm

  Please give some feedback what you need exactly, maybe find us something better...

  Welcome them

• SM Bus controller and controller USB drivers for Pavilion P6 - 2307 has

  Hello

  I am trying to find the drivers for SM Bus controller and USB controller for the Pavilion P6 - 2307. If I go to download drivers and download updates, it does not install it. I run Windows 7 64 bit and I made sure I downloaded the correct drivers.

  At their launch, Windows 7 comes in asking if the run installation program correctly which means that somehow it didn't. It then asks if you want to run it in compatibility mode and if I say yes, nothing happens.

  Can you get it someone please let me know where I can find the correct drivers to make it work on Windows 7 64 bit.

  Thank you

  SAJ

  Hello

  Please use the following driver for SM Bus controller:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 5037949 & prodNameId = 5037951 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-88640-1

  and what follows for USB:

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56138.exe

  Kind regards.

• dirver USB controller for HP 15-d024se for windows 7 64 bit

  I couldn't find the dirver for usb controller for HP 15-d024se for windows 7 64 bit, please help

  Hello

  Please try Driver Intel Management Engine Interface (MEI)

  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64344.exe

  and Intel Chipset Driver and Utility Installation:

  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64343.exe

  Reboot and try Intel USB 3.0 host controller driver

  http://ftp.HP.com/pub/SoftPaq/sp64501-65000/sp64706.exe

  Kind regards.

• Connection 12 '' Macbook to Thunderbolt display does not work (USB - C for HDMI / Lightning)

  I have connected a retina 12 '' Macbook to a Thunderbolt display via two adapters, and no video is coming through.

  Here is what I use:

  1 USB - C for HDMI: (Apple USB - C to HDMI adapter)

  2 HDMI to Thunderbolt (Monoprice adapter)

  Any ideas what's happening? The Thunderbolt display is without a doubt, since power is to come via USB when I plug my phone directly on the back of the monitor. The Apple adapter works because I could try to connect directly to a LG monitor with HDMI ports.

  The present model 2015 MacBook 12 inch Retina does not support the Apple Thunderbolt display

  what I read.  The other models Apple Cinema can work if they are used with correct adapters

  as other brands. Some adapters support the audio, while others do. Note there is

  limits for the specifications of display supported; This can limit their usefulness if it is not better configured.

  Special adapters and cables can allow to configure some display options for use with the MacBook.

  The graphical support through MacBook, MacBook Air, MacBook Pro varies with the specifications.

  The absence of a Thunderbolt port, use of adapters to provide only what it can bear MacBook 12 plug-in software component.

  and the mini-display port cannot connect or transfer at frequencies Thunderbolt usage views. The

  cure should be taken as built-in support for this; If the adapters could carry signals. A new model

  could understand such an improvement; but there is nothing of this specification in the Apple Store again.

  • Use 4K views and Ultra HD TVs with your Mac - Apple Support

  Bolt of lightning • ports and poster: frequently asked questions (FAQ) - Apple Support

  • Get help with graphical problems on external displays connected to your Mac - Apple Support

  Good luck & happy computing!

• How attached iPhone off to USB host for charing only

  How attached iPhone off to USB host for charing only

  How attached a motorized iPhone to USB plug for battery charing

  without the phone starts in normal mode? The phone should simply keep turned off

  and only switch to the mode of charing on its data cable plug-in / original accessory load to the USB host.

  iPhone 6 s.

  You cannot charge an iPhone if it is turned off, because the charger is implemented on the software, which must be supplied to do its job. However, if you plug first, then turn to it it keep the charging circuit on and off the rest of the phone.

• HP - 15 af008ax: my new laptop usb port for the left side does not, only 1 work on 3 Please help me

  My new laptop usb port for the left side does not, only 1 work on 3 Please help me

  Hello:

  Have you installed the drivers for W7 32 bit amd chipset?

  If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

• Need a driver for usb controller for hp pavillion slimline 400 - 020l win 7 pro 64-bit

  Hi guys,.

  I need a driver of usb controller for hp pavillion slimline 400 - 020l win 7 pro 64-bit

  any help will be much appreciated

  Thank you

  Enter the Device Manager and right-click on the device without driver. Select Properties. Use the following image for example, to find the PCI\VEN string. Post it here.

  

• Mcc usb 1208FS for labview 10.0 connection problems

  I have version 10.0 of Labview installed on windows XP computer. I want to connect MCC USB 1208FS for Labview. Not able to see the device MCC in device of measurement and Automation Explorer interface. It appears? Please let me know the steps to access the device of the MCC in Labview.

  I can see the MCC card detected in the software InstalCal of MCC supported. I installed the latest version of the CMC the CMC site software.

  As far as I know, you will not be able to see physical computer as in MAX.

  From the file of help from MAX: "Measurement & Automation explore (MAX) allows to access your National
  Instruments of devices and systems. "that is material MCC is not a feature of National Instruments.

  Why not stick with the InstaCal software and the MCC screws provided?

  Ian

• Looking for USB DAQ for AO using the external sample clock

  Hi all

  I'm looking for a cheap solution for the acquisition of data to select the AO using an external digital signal as sample clock, and I just realized that the USB-6001 is not a good candidate. Please someone remind the cheapest USB version for this task? There no need for high sampling rate. Thank you.

  Define cheap and low sampling rate. You've already been told on the 6211.