USB headset not supporting micro

Similar Questions

• E3000 displays "USB is not supported" error with external hard drive

  I have the E3000 router and recently bought a USB WD (Western Digital) 2 TB external hard drive.  I plug the HDD on the router, open the home page of the router (http://192.168.1.1/) then click on storage > disk and I get an error of "the USB is connected is not supported"-suggestions on how to solve this problem?

  Thanks for any help!

  I had the same problem with my WD hard drive today after setting up my E3000. Remove the protection 'security' or the password on the disk as well as level of what the duration of sleep obtained took care of this problem. My WD is now working with my E3000 seemlesly.

• Logitech usb headset not automatically activated when it is plugged

  On my old XP computer, whenever I plugged my Logitech USB headset, they are automatically detected and enabled, the its path from the speakers to the headphones when the pc has detected the and back to speakers when headphones unplugged, without me having to enter anything. On my new 64 bit Windows 7 pc, I have to open the Sound / select USB Logitech headset and set them as default. On the removal of the helmet, then I have to reverse the sequence. Both PCs have its Soundblaster cards.

  Is there a way to allow the pc to automatically detect the helmet and set them as value by default when it is connected, and vice versa when disconnected, without having to open the audio window all the time.

  Hello

  It will automatically be in headset mode when you plugin and when you remove the headset it will move to sprakers.

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to run this under fixit and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  Method 2:
  Also, try to update the latest drivers for the sound card and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  It will be useful.

• Drever USB not supported in Windows 7

  Hello Sir,

  Please suggest of the my leptop USB Drever not supported in Windows 7.

  Hello:

  This USB3 driver should work for W7 on your HP Pavilion computer 500-241 x Desktop PC:

  http://h20565.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=5404560&swItemId=vc_121496_1&swEnvOid=4058

• Apple USB Super drive not supported error message...!

  Hello.

  MBP 17 "in early 2008, El Capitan 10.11.2...

  Just bought a new drive for Apple USB Super brilliant at my local Apple store there are not 30 minutes.  Came home, plugged in and got the error specified in the JPEG format attached, namely "USB Device not supported.

  The details of the message said "The"Apple SuperDrive USB"is not supported on the Mac."

  Wow, is this true?  Now Apple can't even stand their own material?  USB is supposed to be a standard.  They don't build compatibility USB 2.0 in the last great player...?

  Someone at - it this same problem...?

  Thank you...

  Apple USB SuperDrive requires more power than what is normally allowed for a USB device and therefore is not intended for the Mac comes with internal. If you wish, you can operate in editing a plist in the computer files.

  
  (138201)

• Error message receiver: headphones may not be installed correctly and Sennheiser U 320 USB headset no longer works.

  Original title: USB headset not recognized by windows 8

  I have headphones Sennheiser U 320 USB that I got about 6 months before, it worked fine up until this point. The sound no longer plays through the headphones, he just playing through the speakers. I reinstalled my audio drivers and I tried to put the default audio headset in playback devices but the headphones don't even appear. When I right click on the space empty and check see the disconnected devices that they don't even appear. I don't know what to do at this point. At the time where they worked I got a few messages in the status bar system that says my helmet might not be installed correctly, I tried to fix it but didn't know what to do so I swept, then they just stopped working all together.

  There seems to be something weird with the usb it comes spontaneously started working and then when I unplugged and plugged again it does not work.

  Hello

  For a better understanding of the issue, I would need more information on your side.

  1. are you able to connect and use other USB devices on the computer without any problem?

  2. don't the problem occurs when you connect the headphones on another computer in Windows 8?
  3. What is the brand and model of the computer?

  I suggest to uninstall and reinstall the Device Manager USB controllers and check to see if it helps.

  (a) press on the Windows key + R, type devmgmt.msc.

  (b) expand USB controllers, click drivers.

  (c) click on Properties, click on the Uninstall tab.

  (d) click OK.

  (e) restart the computer and it will update automatically pilots.

  Note: You can also install the latest Chipset driver on the computer manufacturer site.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Device "USB" only is not supported after conversion

  * _Running vSphere + ESXi4 (paid and free) _ *.

  I have a XP system that has operated for some time, with 2 USB Dongles for software installed on VMWare Server authentication.

  Recently I found USB Net ShareStation IOGear solution for sharing USB devices over a local network, so I tried and managed to convert the virtual machine to free ESXi and successfully used the USB devices.  Perfect!

  However, I want to save this virtual machine using Veeam Backup, I need it in my firm paid ESXi so I converted again using the stand-alone converter, but I get the following message if poster every time I try to start it:

  Ons power failure

  vCenter could not find a suitable host to power on the virtual machine for the reasons listed below

  & lt; VM & gt;   & lt; NAME of HOST & gt;  Device 'USB' is not supported.  It is a virtual hardware version general limitation of the virtual machine on the selected host.

  If I change settings and delete or one of the USBs listed as not supported, I get again theerror:

  "USB" device is not supported

  and she does not.

  I only am not familiar with editing ini files so would appreciate pointers that would allow me to remove USB devices manually if this is what it takes so it wil boot.

  Thank you.

  You are welcome

  If you think that my answer was helpful, please give points.

• K4 supports micro SDHC?

  I know that this note of K4 have memory card external slot - which is micro SD

  My question is, it does not support micro SDHC cards?

  Welcoming with satisfaction the responses.

  Thank you

  Is it supports SDHC

• Logitech USB Headset comfort micro works with XP, but not with Windows 7

  Hello.  I recently got a new computer with Windows 7.  I also have one with XP Pro.  My Logitech Comfort USB headset works great with my XP computer, but the microphone on my headset does not work with my computer of W7.  The headphones work fine, I can hear loud and clear.  There is no problems appearing in Device Manager.  Windows installed all the drivers when I plugged it in, it recognizes my helmet and said that it works correctly.  I ran the function of problem solving and it's supposed to be working very well.  Plug into my XP computer and it works fine.

  I tried several 'solutions' Troubleshooting over the few days without result, including the verification of all the sound levels (all 100%), ensuring that drivers is common (they are), to tweak the settings sound in various ways, (possibly reset to defaults), making sure Windows is up to date, blah blah blah.  The Compatibility Center Windows says that my helmet is compatible with W7.

  I looked everywhere and, with the exception of when someone has their Mute microphone or set low volumes, there doesn't seem to be a response to this problem, but there are a lot of people who have this and not only with Logitech headsets.

  Logitech forums say that it is a Microsoft problem, W7 has a compatibility problem.  I don't know what else to do to get my microphone to work.

  I would really appreciate any suggestions beyond the ones I've tried.   Thanks in advance.

  Moki

  Hi Moki-mo,

  The headphones came with the installation software? If so, install the software on the Windows 7 computer. If this does not resolve the problem, visit the Windows 7 Compatibility Center to make sure that the headset is compatible with Windows 7.

• Does not support the Lenovo S650 Usb otg cable

  I bought the new lenovo S650 and I connect the usb otg cable for read my USB but it does not support? Why? Please help me

  S650 hardware does not support the OTG. Regardless of the cable.

  The micro-USB port to charge the phone only.

• Logitech USB Headset H530 NOT Plug and Play

  Just got a Logitech USB Headset H530 - Logitech docs don't say "no driver required" but my computer says differently. Running Vista Home Premium SP 2 64-bit. Plug them in French - is going through the routine "find the pilot, can find no driver." I plug it into another system of 64-bit Vista Home Premium SP 2 and they work!

  Sequence of driver shown on this machine...

  USB driver Composite
  Logitech H350 headset
  USB Human Interface Device
  I never see the other two - it just stops do not find anything for the "unknown device". I scanned the forums here and besides anything. Seems to me that my system does not find the right sequence of events (Composite then HID).

  Any help is appreciated!

  Jim

  Hi Jim,.

  What is the brnad and model of the PC, you cannot install the USB headphnes on?

  What is the brand and model of the PC headset works on?

  I suggest to remove all devices external and other devices in your computer, then restart and try installing the headset.

  You could go in Device Manager, click the view tab at the top and select hidden devices.

  You can remove all instances of the headphones and other devices which are not connected, and then restart the computer.

  As stated in your second post, what chipset driver version you did install (version number in particular, not "the last" please)?

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L550 does not recognize USB Headset

  Hey,.
  I have a Satellite L550 and buyed yesterday a USB headset but my laptop does not see somehting when I put the USB in the port?

  How can I solve this problem?

  Have you noticed the same situation using all USB ports?
  Other USB devices are correctly recognized?
  What operating system do you use?
  Use of the original BONES you with your laptop?

• Selected physical channel DAQmxCreateAIVoltageChan OR-USB-9237 VB6 does not support the type of action required

  I have a VB6 program with code that correctly reads the analog inputs of a NOR-USB-6008.

  I tried to re - use the code in a module of extensometer OR-USB-9237, but at the stage of DAQmxCreateAIVoltageChan, I get the following error:

  "Measurements: physical channel selected does not support the type of measure required by the virtual channel you create."

  Create a channel to a type of measure that is supported by the physical channel, or select a physical channel that supports the type of measure. »

  Should I call one function other than DAQmxCreateAIVoltageChan?

  If so, what is it, or where can I find the reference for these functions?

  Or - if it of the right function, should I pass different arguments?  Currently, I'll call you:

  DAQmxErrChk DAQmxCreateAIVoltageChan(taskHandle, "Dev1/ai1", "", DAQmx_Val_Cfg_Default,-10, 10, DAQmx_Val_VoltageUnits1_Volts, "")

  Thanks in advance for your help

  -Alas

  I thought she 372251a. PDF

  Firstly, the correct function is DAQmxCreateAIVoltageChanWithExcit

  Second, you can't just ask for a sample single channel - ask for 2 samples instead.

  -Alas

• USB-6211 - digital output not supported?

  Hi all

  I can't use the USB6211 device port... I use daqmx with Delphi7 API functions.

  First of all, I tried this:

  DAQmxCreateTask('', @TaskDO);
  DAQmxCreateDOChan (TaskDO, PChar('Dev1/port0'), ", DAQmx_Val_ChanForAllLines);
  DAQmxWriteDigitalU8 (TaskDO, 1, 1, 1, DAQmx_Val_GroupByChannel, $FF, @written, nil);

  I had an error in the DAQmxWriteDigitalU8:-200012 (= digital output not supported). (???)

  OK, I tried to disable autostart option based on DAQmxWriteDigitalU8 and insert a 'manual' start in the code:

  DAQmxCreateTask('', @TaskDO);
  DAQmxCreateDOChan (TaskDO, PChar('Dev1/port0'), ", DAQmx_Val_ChanForAllLines);
  DAQmxStartTask (TaskDO);
  DAQmxWriteDigitalU8 (TaskDO, 1, 0, 1, DAQmx_Val_GroupByChannel, $FF, @written, nil);
  DAQmxStopTask (TaskDO);

  Now, I got the same error in DAQmxStartTask:-200012 (Digital Output not supported, once again). (?????)

  I don't understand.. 'Digital output not supported "? USB-6211 has 4 lines! What is the problem?

  I want to just turn on and off the lines from code...

  -Cs George-

  Well, finally I figured out...

  Here is the solution:

  DAQmxCreateTask('', @TaskDO);
  DAQmxCreateDOChan (TaskDO, PChar('Dev1/port1'), ", DAQmx_Val_ChanForAllLines);
  DAQmxWriteDigitalU8 (TaskDO, 1, @dummy, 1, DAQmx_Val_GroupByChannel, @bitmask, @written, nil);

  Digital output lines are on port1! Corrected parameter.
  And the part of the interface of DAQmxWriteDigitalU8 had to be changed (in nidaqmx.pas).
  I don't know why, but the AutoStart (dummy) parameter in the DAQmxWriteDigitalU8 function is ignored: function always starts task automatically, regardless of the value of autostart. But this isn't a problem for me.

  -Cs George-

• NI-VISA 5.3 driver Wizard does not support USB 3.0 devices

  Hi all

  It seems that NI-VISA 5.3 does not support USB 3.0 devices. When I try to use the driver Wizard to create a driver for a USB 3.0 device, I get the error "ERROR-1073807178: device descriptor error - value not valid bMaxPacketSize0 (must be set to 8, 16, 32, or 64 bytes). I noticed that the unit has been giving wMaxPacketSize0 of 512 (2 ^ 9). But the driver Wizard treats the value 9. So I think that Assistant driver does not support USB 3.0 devices. If someone could confirm this?

  Thank you very much in advance!

  Jackie

  Hello Jackie,.

  Unfortunately, USB 3.0 is not officially supported in VISA 5.3 when you use VISA Driver Wizard.

  A non-official solution is to work around the "information in the descriptor' by selecting 'Other' in the list of devices. You will need to manually enter the 'USB manufacturer ID (vendor ID)' and 'type USB (Product ID) Code. You will then need to find your driver in Windows Device Manager, right click and select "update driver software". This, however, is not a workaround solution guaranteed as NI-VISA 5.3 is not officially compatible USB 3.0.