USB parallel adapter

Similar Questions

• HP laserjet 1200 using windows7, wired to the printer with a USB to parallel adapter

  HP laserjet 1200 using windows7. My computer has USB ports, but no parallel port, if the computer is connected to the printer with a USB to parallel adapter. Sometimes works very well, sometimes States printer system as ready, but do not print. Reboot hardware and upon restarting, I got a page to print. Next attempt to print updates the document in cue, but is right there - no error message. Finally, after several reboots, I managed to do print (have no idea how), but now I had to print 20 pages one page at a time. It will print no more than one page, even if I have to print the 20. Next time I start the computer I don't know if the printer will print. Do you need to use the same USB port each time, or are USB to parallel unreliable maps?

  Hey renradd!

  Unfortunately, in addition to the adapters USB can be unreliable. Only a new printer, I don't know what it will provide you with a fix for this problem. You can try a different card if you have one, but if it still does not work, I would look for in a printer capable of supporting your computer.

  I hope this helps!

• iPod Touch 6th gen, lightning to the USB Camera adapter? Will it work?

  Hello

  I would use this official Apple product for my iPod Touch gen 6 for that I can connect with many

  devices.

  http://www.Apple.com/shop/product/MD821AM/A/lightning-to-USB-camera-adapter

  Someone at - he's trying to use it since it is not "officially" supported for iPod Touch product line?

  CCK is not supported on an iPod. The CCK has always relied on an iPad and iOS added 9.2 compatibility for iPhones...

• 10.11.3 USB series adapter

  Hi guys, I have a serial lindy USB adapter I used on my MBP successfully for a few years... until I upgraded 10.3.11 on my computer... now have updated drivers it will see not the com port when I try to log in series.

  does anyone have a solution? or even got a USB serial adapter that they use with the OSX above?

  happy to buy a new one if I have to

  Here is what has been the Keyspan USB serial adapter. The product page claims in favour of El Capitan.

  See ace http://www.tripplite.com/keyspan-high-speed-usb-to-serial-adapter-microsoft-surf ~ USA19HS /

• USB serial adapter works once for each reboot...

  I have a serial adapter USB to connect to the CONSOLE of the switch/router port and I use 'screen' inside the Terminal to connect. Recently, I found that the "screen /dev/cu.usbserial 9600" works only once for each restart of the system. Steps to reproduce:

  1. the output of "ls/dev / * usb *" shows the right device.

  2. connect to the console of the machine with 'screen /dev/cu.usbserial 9600 '.

  3. press on "Ctrl + A, Ctrl + K" to exit the screen

  4. (optional) disconnect/reconnect the usb to adapter series laptop OR disconnect/reconnect the cable to the device console target.

  5. the output of "ls/dev / * usb *" shows again the device.

  6. try to connect to the console with "screen /dev/cu.usbserial 9600", the process of the screen will hang. Once what is happening, the screen process cannot be killed by 'sudo kill-9' and only be solved by turning off the power full. BTW, the laptop will hang also when the start/stop, until I continue to press on the button / stop...

  7. When hanging them screen, the output of "ls/dev / * usb *" would show nothing.

  Once the notebook starts up again, I can connect with the same command screen and the same scenario for step 2-3 above...

  I have Mac OS 10.11.3 and adapter Micro Innovations brand (prolific chip). I downloaded and installed/re-installed driver from the prolific site and no difference...

  Any idea?

  Still questions... help!

• Watt 5 Apple USB Power adapt

  Hi all

  Just brought an iPod classic 30 GB with only the USB charge lead. Will be using the USB cable and the 5 Watt Mini iPad adapter for my iPod?

  See you soon

  There are several 30GB iPod "classic" models (3rd gen - 5th generation), but if it's the 5th gen "video" iPod (the last 30 GB iPod), I an and it recharges a 5W power adapter.  In addition, it's the Apple 5W power adapter registration

  http://www.Apple.com/shop/product/MD810LL/A/Apple-5W-USB-power-adapter

  and iPod 5th generation (video) on the list under compatibility.  The 4th generation iPod should also works very well.  The 3 rd gen iPod requires FireWire-base load; It will not charge with a USB connection.

• Found usb bluetooth adapter in 626 x box? Where the application overview?

  I just bought a replacement to my 2009 Enterprise edition ReadyNas Pro success. I have contributed the most to the RAM and upgraded the processor in the old horse in 2009 and it has been amazing ever since, but recently the lower power supply fan seized completely it is time to retire the old box and upgrade!

  So, I bought a 626 X last week and it's currently sitting in my living room. I'm waiting for an update of backup on USB to finish at the old box, then I'll change the disks of 6x2tb of place in the new unit and restore the backup.

  Unpacking of the new kit, I found a USB bluetooth adapter that is stuck inside the box. Around the navigation, I found mention of a 'insight' phone application that uses bluetooth. I can't seem to find it either in the app store of apple or android and I saw other a designate as beta.

  Anyone has any info on this app or what can I do with the bluetooth dongle?

  Hi Cpitchford,

  Application overview is not yet officially published, please wait.

• How to install the USB WiFi adapter?

  I've received a USB WIFI adapter and do not know how to set up or even knowing if it is attached.

  New hardware has been installed on the plug-in. Switch turned on, but there is nothing that lets me know he's working.

  Hi garyhenrymacphail,

  Hmm and what should I say now? I also put t how to configure your USB WiFi adapter because I don t know which you have, what laptop and operating system.

  The spirit normally each USB WiFi adapter, you also get a manual how to install it. Alternative, contact the manufacture of this adapter for more information.

• The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  The Apple Magic Keyboard can operate without bluetooth when connected to an iPad with the lightning to the USB camera adapter?

  I love the Apple Magic Keyboard to be very light (I want it with me everywhere). I also like that I can choose the layout of the keyboard I want (Canadian multilingual), which is not available on any keyboard for any brand, with the exception of Apple iPad (and I did a ton of research). I have problems with the old model of keyboard Apple Wireless because of the Bluetooth connection: I often have trouble connecting. I want a reliable keyboard. I don't like having to plug the keyboard on the iPad, and I think that a wired keyboard can more reliable and safer than a wireless keyboard. And a wired keyboard never had battery problems.

  I read that the Apple Magic Keyboard can work wired with a Mac without bluetooth. And I read that some USB keyboards work with lightning to the USB camera adapter. There are several keyboards with a cable (Belkin or Logitech) lightning, but none with the available Canadian multilingual.

  So, if I buy a magical keyboard Apple and a Flash to the USB adapter of the camera, according to my needs, I'll be satisfied or I'm going to be disappointed?

  A better solution would be to have a male-male cable lightning between the keyboard and the iPad, but I don't find any of these products anywhere.

  Thank you.

  It will not work. And where did you read that the keyboard works wired with a Mac?

• ProBook 430 G3: USB ethernet adapter cannot be enabled.

  Hello

  I have to connect the public network with integrated lan card and share another PC via the USB ethernet adapter.

  After installation of the USB adapter, the card is automatically disabled and it displays the error code 22 in Device Manager.

  Once I click on activate the device, it can be activated for less than 1 second, and then goes back to the people with reduced mobility.

  This condition occurs on these two chip axis and the Realtek chip.

  Are there solutions to enable the USB card successfully?

  I found the root cause that there is an application automatically disabled my NIC after the slaughter of the application, the NETWORK adapter can be enabled correctly.

• BSOD when putting in an Inspiron 1100 USB wifi adapter

  When you use a cat5 connection, it works fine.  Much less the 100% of the svchost CPU, I connected via the Task Manager.  The KB update did not help.  Minor problem.

  The major problem is that I get several BSOD when I plug the USB wifi adapter.  Mainly of 0 x 00000050 0x0000008e, 0x000000c2 and 0x000000f4. I have reinstalled twice in the driver package.  The adapter is compatible XP.  I tried both USB ports.  This is the second card, I tried from different manufacturers.  I scanned for viruses and malware.  To make this usable machine, there must be wireless.  Any help is welcome.

  Please follow our instructions to find and download the files, we need to help you fix your computer.  They can be found at here

  If you have any questions regarding the procedure, please ask

• Aspire ax1800. It is better to add a wireless card or a usb wireless adapter will be sufficient

  Aspire ax1800 doesn't have a wireless card.  It is better to add a wireless card or a usb wireless adapter will be sufficient?

  Hello

  Here's the original Council/dongles Wireless:

• wusb100 usb wireless adapter is no longer recognized

  Hi, I have a wireless usb adapter wusb100 who ceased to be recognized when inserted into the usb port. It used to work very well and I think the usb can have viruses on it. I don't know if a usb wireless adapter can catch a virus? What can I do to check? I have windows xp pro

  Hello

  1. What is the exact error message?

  2 has there been recent changes made on the computer before the show?

  Please follow the provided steps and check if that helps.

  Method 1: Open recognition of the USB device by using Device Manager

  To initiate recognition of the USB device by using Device Manager, follow these steps:

  a. click Start; Click run, type Devmgmt.msc, and then click OK. The Device Manager window opens.

  b. Click to select your computer as the location for the scan.

  c. on the Action menu, click on Search the hardware changes.

  d. Windows XP recognizes the new device.

  e. close the Device Manager window.

  If this method does not resolve the problem, go to method 2.

  Method 2: Remove and reinstall all USB controllers

  To remove and reinstall all USB controllers, follow these steps:

  a. click Start, click run, type sysdm.cpl in the Open box and then click OK.

  b. click on the hardware tab.

  c. click the Device Manager button.

  d. expand Bus USB controllers.

  e. right click on each device under the Bus USB controllers node and then click Uninstall to remove them one at a time.

  f. restart the computer and reinstall the USB controllers.

  g. plug in the removable USB storage device, then check if it helps.

  For more information, see the link: troubleshooting tips advanced to General problems USB in Windows XP

  http://support.Microsoft.com/kb/310575

  Let us know if it helps!

• StarTech ec1pecps parallel adapter does not start, error 10

  I'm having trouble installing a parallel adapter from Startech ec1pecps on my laptop Dell inspiron 9400 running XP. I tried new drivers and the advice of the other forums, but the device driver says: "device cannot start error 10.» I received no response from Startech on it. Can anyone help?

  Hi GregSwinburne,

  ·         Have you tried to connect the unit to a different computer and check?

  The Code 10 error code is generated when the Device Manager has not enough information or the error that is upward by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  For more information, see the article:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  You can also run the troubleshooter and check if it works.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Let us know if that helps.

• USB wireless adapter for computer laptop problem

  Hello:

  The HP laptop with XP get "Low" signal every time I'm in the other room that is not too much longer off the router, about 60 to 70 feet away from him.  Then, yesterday, I got USB Netgear adapter in the hope of trying to get more signal.  Because, says a guy in the store of the computer installation USB adapter is 'boost' to get decent and more signals.

  When I installed the Netgear adapter for the laptop, there is no signal at all and to appear the following message appears in the middle of the screen.

  NETGEAR 111v3 Smart Wizard, WEP Passphrase to create WG and the key manually

  My question is;

  How to install the USB Netgear adapter for laptop?

  Thank you for your help in advance.

  Hello

  The general idea that a USB adapter is a bit a booster dose is false. I'm not sure that you will get the USB Ant thing you don't get the laptop.

  According to the physical environment, 60 to 70 domestic feet with walls is probably beyond the capacity of the wireless router.

  As for your specific question, it seems that USB is correctly installed but must adjust its password security to your current wireless network.

  In general.

  My wireless is not working - http://www.ezlan.net/wireless.html

  Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

  Wireless Security - http://www.ezlan.net/Wireless_Security.html

  Extending remote - http://www.ezlan.net/Distance.html

  Jack-MVP Windows Networking. WWW.EZLAN.NET