USB Ports dead after undocking and anchor W510 in Minidock Plus series 3

Similar Questions

• USB ports not recognizing keyboard and the mouse after sleep

  I have a wireless Logitech and mouse keyboard. These connect to my PC (Vista32) wirelessly via a USB plug small heel I plug into a USB port. Logitech called "Unify" which, according to them, is standard to connect devices through a USB port. My mouse and keyboard work fine when I restart my computer, but when he goes to sleep and I me re - wake up there that they do not have. I force power off of my computer because I can't access my account.

  I have ensured that the selective suspend setting in settings usb in advance power settings is disabled. Support Logitech seem unable to help him.

  Hey Sinclair,

  You can refer to this link suggestions and answer us with the State of the question.

  A USB device may no longer work correctly when Windows Vista comes out of standby or hibernation

  http://support.Microsoft.com/kb/928631

  Also refer to this link: How to troubleshoot USB device problems that can occur after a PC that is running Windows 7 or Windows Vista from sleep or hibernation resume

  http://support.Microsoft.com/kb/953367

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I hope this helps.

• I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  I have an imac 27 "... on power there is no signal to startap, usb ports are not working and its deadlock with the logo of the Apple with the circle of rotation... Help, please

  Wake the computer to your Apple store or Apple authorized service for the service provider. He probably suffered a hardware failure.

• try connecting a printer, mobilefoon or e-reader for my laptop USB port I ad, 2 and 3

  Original title: USB Port

  I am trying to connect a printer, mobilefoon or e-reader for my laptop USB port I ad, 2 and 3.

  There is no device USB not recognized message any device.

  Try a regular wired mouse or the keyboard to test the hypothesis that none of your USB ports work

  If this is the case:

  Start, type device in the text box, select Device Manager

  Right click on the USB one host controllers at once and to uninstall

  Reset

  Which should cause Windows to re - install their drivers

  Let us know the result, please

• All my USB ports are disabled; keyboard and mouse do not work, can not navigate to reactivate their?

  After installing Java rebooted my system update, while booting it showed Eroor message 'BootMGR' missing, disabled bymistake USB ports, now my keyboard & mouse not working does not help?

  Hi Abhi SR,

  ·        How do you disabled the USB ports?

  ·        What you did to fix the "BootMGR" error missing?

  If you have disabled the USB ports in the BIOS (Basic Input Output System), you will need to use a PS2 Keyboard and enter the BIOS for their re help.

  Note: Changing the BIOS / chipset can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/chipset can be solved. Changes to settings are at your own risk.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ProDesk 600 MT: all the usb port disabled after startup Win7

  Hello world

  I just brought a few ProDesk 600 MT after that the installation operating system, one of them seems locked all the usb port after the boot of win7.

  Can I use keyboard and mouse during startup, including the bios or windows safe mode selection menu. However, once started to win7, all usb port are disabled, not even power supply. Which means no keyboard, no mouse. I can't do anything else until the eve of the computer by push and hold button / stop.

  Anyone know why and how to solve this problem?

  Thank you

  Alan

  Hi, Alan:

  See if the news on the thread below solves the problem, if your PC is chipset Skylake.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/can-not-install-Windows-7-on-new-600-G2/m-p/5822964/highlight/true#M130817

• E280 plugged into a USB port may be bad and it fried my sansa?

  Hello everyone, this is perhaps my last posting! I am so sad and upset: I just plugged my V1 e280 on a friends computer using a sandisk connector cable I got free on a freebox (variable n ° 1) and plugged into the front USB port (variable n ° 2); He turns, and then now it won't turn at ALL.  I opened the back and took out the battery, and it was VERY HOT.  I messed up with the battery for a while and it won't always turn.  Then I plugged it in USB computer port (my friend just told me, "those before does not work") and still it won't turn.  HOWEVER, a minute or two later, always connected, the BLUE RING OF DEATH on and is always turned on, ten minutes later while the screen is still blank, until the unit is now so hot that they are almost HOT.  I put it in the refrigerator.

  So.  That's happened?  I'm f * cked?  Whose heads will roll for this disaster?  PLEASE HELP I CAN'T UNDERSTAND THIS.

  Thank you very much

  YES, I'M SURE IT IS a SANSA CABLE, it says "SanDisk" on it and is similar to my own cable.  What diff he would do anyway, the device is F - ed.  Also, it turns out that it was the old cable and not the other, although a big deal.  Any advice for me?

• USB ports, CD/DVD player, and Mike just does not work

  So I'm pretty sure that these things are happening at the same time, although there are risks my trying to troubleshoot the USB ports have contributed to the failure of the microphone (internal and will not capture sound) and cd/dvd drive (not open). Perhaps? It is true that I know little about these kinds of things, but I'm much less following the indications which is what I did to try to tackle the problem of USB port, which was the first I noticed. I followed all the advice I could find online for troubleshooting when all usb ports do not respond. I used Device Manager to disable in its regular and safe mode. I also uninstalled them all in both modes (even if they reinstall until I'm able to restart). I unplugged and wait 5, 10, 15 min etc. There was a difficulty mentioned about watching the. Mine and INF files do not contain the mentioned error. I'm tempted to all my files backup and restore the computer to factory settings, especially now that the CD/DVD player and the micro does not work. This would solve the problem? If these things are related? Could even restore settings because I can't have in the cd/dvd drive? It's a dell inspiron 1721, and it crushed while you restart for almost a whole day just all the time I've began to notice all these malfunctions. I really appreciate any guidance!

  Good so I solved all of these problems. I don't know what did the trick, but when I went back in the BIOS to re - activate the ports they have worked!

• USB port not recognize mice and other devices.

  I have a logitech wireless mouse who worked on my computer (Fujitsu A6220) for 2.5 years, but now device for ports management USB says that it does not recognize the device.  I travel and a few times I returned from a trip and trendy and it worked for a few days.  I have the same problem with my printer and an external drive connected to the USB ports.  I also tried a USB mouse that is not wireless and same problem.  The mouse works on other computers.  I tried the update of drivers and get a response the the best driver is already installed.

  So, this could be a hardware problem?

  I get the error message is: Windows stopped device (Code 43) port #0001, Hub_ #000

  Hello

  1 did you change on your computer?

  You can connect another USB device into the outlet to check if it works.

  Method 1:

  Step 1:

  Remove and reinstall all USB controllers to remove and reinstall all USB controllers, follow these steps:

  (a) click Start, run, type sysdm.cpl in the Open box, and then click OK.

  (b) click on the Hardware tab.

  (c) click the Device Manager button.

  (d) expand Bus USB controllers.

  (e) right click on each device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  (f) restart the computer and reinstall the USB controllers.

  (g) connect the removable USB storage device and perform a test to ensure that the problem is solved

  Step 2:

  You can visit this link below and check if the problem gets solved by running the fixit.

  http://support.Microsoft.com/GP/hardware_device_problems

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Method 2:

  I suggest you to follow the steps from the link and check.

  Code 43: Windows has stopped this device because it has reported problems

  http://TechNet.Microsoft.com/en-us/library/cc725873 (WS.10) .aspx

• delivers USB ports until after the pc wakes up from sleep

  When I put the pc to sleep its all good, but when I try to wake up the pc to sleep, the mouse stop working, it is power as I see the red light on the mouse, but I can't control it I tried to change the power supply to all three options, I put the USB suspend to disable, I enabled device wake up 'allow' the computer or turn off depending It has been verified or not, and the result is the same: works for the first sleep, but after that, he returned. I check the http://support.microsoft.com/kb/266283 link, which seems almost there, but there is also another device that is affected: the wireless card. What happens to her is it turns on and is active but the router should automatically connect to is not. When I go to 'network' and select the router, the "connect automatically" box is checked, even if it does not connect. the only way to get 2 assistive devices is again to disconnect and then reconnect: the mouse moves and automatic network connects again.

  Thank you

  Hi Aromero,

  I suggest to follow the steps below and check if it helps to solve the problem:

  Method 1

  Reinstall the USB controllers.

  This method addresses the steps where the USB driver currently loaded became unstable or corrupted.

  1. on the desktop, press the Windows key + X , and then select Device Manager.

  2. expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.

  When finished, restart your computer. Your USB controllers will automatically install.

  If this does not resolve your issue, go to method 2

  Method 2

  Install the latest drivers for your motherboard chipset.

  This method updates the chipset of your motherboard drivers, so that your computer will use your USB devices.

  1 see the documentation for your computer that will contain the name of the manufacturer of the motherboard.

  2. visit your computer manufacturer's support Web site. For a list of the computer manufacturers support sites, visit: http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers

  (http://windows.microsoft.com/en-US/windows/help/contact-support/computer-manufacturers)

  Go to their Web site to find the appropriate drivers for your motherboard. For assistance, contact the manufacturer of your computer.

  I hope this helps.

• USB ports of my son and the webcam will not work. We get "driver webcam open fail." "Please restart camera or computer" and 19 code for USB

  In the Device Manager say USB controllers ' Windows cannot start this hardware because its information for configuration (in the registry) is incomplete or damaged (Code 19).»  We have already deleted the drivers and rebooted (did not work) and tried a restore from the registry, but there was nothing old enough to return to. Now what?

  Hello

  There could be a hardware problem that just happened to come while he was on the system.

  Disable Legacy Support just in case he has a problem - don't forget to put back so no joy. Look to see
  If there is another USB settings and check with system manufacturers.

  Maybe an upgrade InPlace or even a reinstall of Windows would be useful.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Don't forget to do a good backup, or three if you
  keep the data.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  --------------------------------------------------------------------------

  Several options below.

  You mean reinstall the OS completely? If you have Vista DVD you can do however make sure to
  totally your data off the drive of backup, and you need to reinstall your programs. If you do not
  Disks of Vista, you can buy them in your machine to cheap system. If you don't care about existing programs
  Then you can make a complete new installation - just select the format options that erases the entire disc (this
  Clears all data as well).

  How to perform a repair for Vista Installation (this keeps your data if the backup off the)
  Player is safe)
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  How to do a clean install and the installer with a full Version of Vista - this erase ALL programs and data on
  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  This tells you how to access the System Recovery Options and/or Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to do a clean install with a Version upgrade to Vista - this wipes ALL programs and data on
  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  How to do a Custom Installation of Vista - this is a clean install should, however, save your data
  http://www.Vistax64.com/tutorials/241565-custom-install-Vista.html

  Upgrade to another edition of Windows Vista - this should keep the programs and data
  http://windowshelp.Microsoft.com/Windows/en-us/help/3af7e05f-4d2a-4af7-A168-9242f9093bb81033.mspx

  Installation and reinstallation of Windows (upgrade - store programs and data or New Installation that removes them)
  http://windowshelp.Microsoft.com/Windows/en-us/help/e77344fa-e978-464c-953e-eba44f0522671033.mspx

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite C650 USB - Ports off a few minutes after the start of every day

  When I start my C650 Satellite for the first time every day the USB ports work perfectly, then after a few minutes, that you hear the-, they stop working and features of disappear of display devices & Printers.

  Reboot during the day makes no difference but the next day to the first commissioning of the USB ports working again. I think that every day they work a little longer, but I have not yet proved.

  Anyone got any ideas?

  You already posted in this thread.
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=73552

  Therefore, it would be interesting to know how USB ports work after that USB controllers was removed and installed again. The comments appreciated.

  In addition, you can disable the option that allows to disable USB ports in order to save power. This can be done in-USB Controllers-> properties > Device Manager - > last tab (power management)

• Satellite Pro 6100: USB port does not work after the return of the mode "Eve"

  I have a strange error on my USB ports on Satttelite Pro 6100 with XP SP2.

  Two USB 1.1 ports work fine after cranking up what the laptop goes into mode 'sleep' (automatically or manually).
  The restart afret optical mouse connected to the USB port does not illuminate and the XP system displays the error message on the device not recognized on USB port.

  Plug the mouse on or off doesn't change anything. Only restart helps.

  Any ideas?

  It's very strange, but it will be interesting to see if the same problem persists with other USB devices. Can you test and post again on the results?

• Cracked screen and faulty USB ports on Satellite A105-S1014

  On my Satellite A105-S1014 screen is cracked and needs to be replaced. How much cost could replace the screen?

  In addition, my phone and USB ports do not work properly. This problem arise well before that I accidentally cracked the screen. Some times when I turn first of all the computer, USB port and telephone ports work for awhile and then after a period of time ranging from a few minutes to several hours, they badly run simultaneously and the computer says that what is in the USB port does not work and that there is no dial tone in the phone port that I use to access dial-up. At the beginning, I don't have this problem with the Toshiba laptop, but it arises after about three months.

  My warranty has expired. How much it could cost to solve the problem of the phone and USB ports?

  Hey Buddy,
  I can't tell you how much would it cost to fix these two things, but I can tell you that you buy rather a new machine because the display and motherboard are the most expensive parts in your machine. Since your ports USB and your RJ11 (phone port) don't work anymore and this stuff is on the motherboard, I guess you have to swap the motherboard, too.

  I suggest you to sell your machine @ ebay and buy another. It would be too expensive to fix your machine. Believe me, I had a case of simiar and parts cost more then buy a new machine that was more recent and better performance.

  Just my opinion and just a thought for you... :)

  Welcome them

• My USB ports and MIC do not work. I hope that this is not the motherboard. Someone knows how to fix this?

  Initially, it was a port that would not work. Before the USB ports out I did pay my phone with the USB cable. Before that my microphone stopped working. Deactivation and activation of the ports as well as uninstall then re install the USB readers and I tried a system restore. I also tried to take the battery for an hour or two and restart the PC. None of this has worked. Today, I heard some hope of my computer... I heard the sound of him recognize a dongle that is plugged. This sound is produced after starting my PC. I have not heard in a while and still haven't when I unplug and plug back in to the dongles. My computer (a laptop) like also to restart auto sometimes when I close the lid and open it, the screen does not light and it will be off and try to restart itself but the screen never lights up and he'll stop and try several times to start. In this case I have to hold the power button down to turn off completely and take the battery out and put it back in, then turn it on. I feel that it's a hardware problem but I'm not that great with computers and I don't want to give up yet on this computer. It cost me a pretty penny and I am a broke student.

  If anyone had the same types of problems and has a solution I'm willing to try anything.
  Thanks in advance
  -Mike

  Hi Mike,.

  You can consult the following wire link and check if it helps.

  Tips for solving problems of USB devices

  It seems that you have to re - enable ports in the BIOS (Basic input/output system) settings.

  NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk. Be sure to observe the manufacturer's instructions or contact the manufacturer for the same thing.

  You can consult the following thread link and check.

  USB ports, CD/DVD player, and Mike just does not work