Use high processor after installing XP SP3.

Similar Questions

• No internet after installing xp sp3

  Original title: I installed XP SP3 and it seems to have erased all my network connections. Now will not set up new so I have no internet access... Any ideas?
  Had a recurring problem with the crash of the PC. This was resolved after I installed SP3, but the installation seems to have wiped my network connections. If I run the wizards to build their new it simply refuses to do so. I tried to reinstall my router, but that did no good.

  Help!

  Hello

  You receive an error message on the computer?

   
  Method 1:
  You can solve the problem of connection by following the steps in the link provided.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  You can try the steps listed in the links and check if it helps:
  Device Manager and network connections may be blank after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953791

  Device Manager may not show that all devices and network connections may not display network connections after installing Windows XP Service Pack 3 (SP3)
  http://support.Microsoft.com/kb/953979
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756 )
  How to back up and restore the registry in Windows.
  
  Method 3:
  You can also check out the link to see how to install Windows XP Service Pack 3
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

• Impossible to go online using Internet Explore after installing updates

  Title: I use Windows Vista Home Ed and after installing Windows updates 08/22/2012 (7 in total) I can't access any site on Internet Explorer without using the system restore

  I use Windows Vista Home Ed and after installing Windows updates 08/22/2012 (7 in total) I can't access a website on Internet Explorer. I need to restore my computer to the 21/08/2012 and then, all right, but I don't want to have to do that every day. Any ideas?

  The Windows updates were installed automatically and there was 7, so I can't identify which could be the cause of the problem. I also have access to internet via Sky which is my broadband provider. I use Internet Explorer 9.

  Hello

  -You have Windows Vista SP1 or SP2 installed on your computer?
  -What is the error message accurate/complete that you receive when you try to go online using Internet Explorer after you install the updates?
  -Is the issue not limited only with Internet Explorer or other web browsers?
  -What software Antivirus installed on your computer?
   
  Method 1: I suggest to follow the steps from the link below and check if the problem persists.
  Can't access some Web sites in Internet Explorer
  http://support.Microsoft.com/kb/967897
  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
   
  Method 2: If the problem persists, I suggest you to see link below and check if it helps.
  "Internet Explorer cannot display the webpage" error in Internet Explorer
  http://support.Microsoft.com/kb/956196
  For reference:
  Tips for solving problems when Internet Explorer hangs or stops working
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer
   
  Method 3: I also suggest that you install the updates in Mode safe mode with Networking if it is wired connection.
  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
   
  For reference:
  http://www.Microsoft.com/Windows/using/tools/IGD/default.mspx
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
   
  Hope this information helps.

• Computer OS used to start after installing windows 10

  Hello im having problem starting my system after installing windows 10. I did the install and it worked fine since the upgrade to 8.1. But then I tried to format the drive and in the menu format, he's stuck at 2%, and then I restarted the computer. Now it will hang at the hp logo and go back to the same logo. Do I have to replace my hard drive?

  What I understand, if you have completed the 10 Windows Installer and everything has happened until the end, then you are supposed to be able to do a clean install with the download of Windows 10 DVD or USB.  With a working computer, GO to THIS PAGEand scroll down to the button "download tool" selection the 64-bit version.  Once clicked, it will ask you if you want a DVD or USB for the iso.

  Once it's done and you have the DVD or the USB version, see if you can install Windows 10.  If this fails, you may need to replace the hard drive.

• Lightroom CC used to start after installing on mac

  Lightroom CC used to start after installation on both my mac, it only hows a splash screen at startup.

  I tried to restart the computer

  Someone knows what to do?

  A common question. A common response:

  Sign in, sign out | Creative office cloud app

• High utilization of the processor after installing the HP printer

  My computer is running Windows XP. When installing recently my computer HP printer failed complete installation on the supplied CD.

  Then I noticed a dramatic slowdown in the speed of the computer.
  I uninstalled the HP from the disk and was able to install the printer using the HP Web site.
  Since my computer is very slow to start. While they inspected the Task Manager, I noticed that Explorer.exe uses sometimes up to 100% of the CPU. How can I fix it?

  What is the processor and RAM how much your computer have? Make a right-click on the icon my computer on your desktop and select properties for this information.

  Try Ctrl + Alt + Delete, select Task Manager, and then click the performance tab. Under Commit Charge, which is the Total, limit, and the pic?

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, and place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Event Viewer reports

  1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

  2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

  3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs.

  4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. You will see a button resembling two pages. Click on the button and close Event Viewer. This places a copy of the report to your Clipboard. Paste it into the body of your message. Make sure that it is the first dough right out of the event viewer.

  5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

  6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

  7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

• HP mini5102 interruption using high CPU after sleep / resume

  I have the same problem described recently (without solution) on the Forum of Support HP Business. After resume from sleep, 5102 HPmini consumes constantly about 30% of the capacity of the CPU even with the system at idle. Sunny (0-3% CPU use at idle) before going to sleep. As Roderick Laird (copied below) I've already got rid of wireless assistant that caused a different problem of high CPU usage (100% CPU use even before you sleep / resume, now fixed by an update of the version unless served for those who want to keep the wireless assistant).

  Consumption of futile processor by 30% after standby/sleep is due to material interruptions (revealed by Sysinternals Process Explorer). I understand that may be due to problems such as several drivers attempting to control a device (for example, after a faulty update). But I have no idea how find the offending device or drivers.

  My guess is that many owners of this model simply did not notice the problem and they areassuming the poor performance is due to the atom processor netbook. You must use Task Manager or performance monitor to view CPU usage high, and process Explorer to find it hardware interrupts.

  If anyone has found the cause / solution?

  HP, help to resolve this issue please--nobody wants netbooks HP fall into the category "do not buy" due to persistent problems with the futile CPU usage. The HP mini 5102 is the flagship model!

  Ref:

  "Author subject: HP mini5102 interruption high CPU usage after standby Roderick Laird 24 March 2010 04:03:03 GMT - I see of other HP5102 users having problems with high use of the processor of the Wireless Wizard operation amok; I avoided this by disabling the corresponding services. But one problem remains. The system works beautifully/effectively from a cold start. However, if I go back I think that interruptions are consumes about 35% of the cycles CPU. Not something that I want to pass battery on. I made sure that all the drivers are the latest versions according to the HP support site. I also tried disabling the obvious drivers that might be wrong (wireless, ethernet, audio, non-touchpad mouse)... »

  Update the Intel AHCI 9.6.4.1002 driver (iastor.sys) removes the futile CPU usage after sleep from 30% to 20%. This is not in the drivers of HP, but is available at Intel. Subsequently the chipset driver updates might solve the problem. In the meantime:

  Disabling in BIOS Drivelock completely eliminates the problem!

  Apparently users who want a computer that is useful after sleep / summary to know somehow ignore the advice of stern of HP in the BIOS that Drivelock is recommended for safety.

  It cost a lot of time to resolve, with no whatesover help to be published by HP. My consolation is that by systematically eliminating all the bloatware and other services-waste of unused resources, pilots and scheduled tasks automatically loaded on the system (while trying to find the cause of the CPU / interrupt use) I now have a mini 5102 (SSD) that:

  * Cold boots Win 7 Pro 32 in less than 30 seconds (including wireless access)

  * Stops in less than 8 seconds

  * Beds / back in 1-2 seconds

  * Consumes less than 600 MB of RAM at idle

• Satellite Pro U400 - micro reception problem after installing xp sp3

  I had Vista, then I recently installed windows XP SP3 from scratch (not downgraded). I downloaded the latest drivers from Toshiba and install. Now, I have a problem with the microphone. Speakers audio playback is fine, but the built-in microphone reception level is very low and often unrecognizable. I use a voip program. In Vista, micro worked better.

  Now in Windows XP Home edition, I told myself that they cannot hear me or my voice is very weak and difficult to recognize. I also tried to sound recorder in windows. My voice is as if I am talking about ten meters.
  I have an external microphone, so I can't say if line microphone. works well.

  In messages previous people mention a fix for xp download his questions but I'm not sure if applies to my situation.

  Thank you

  Erdem

  Hello Erdem

  As I see you have CD/DVD for Windows XP SP3 home edition recovery facilities. Everything worked well with the original recovery image? I have way is there a reason why you installed the new driver?
  Were you informed of the new drivers (Tempro) somehow?

  You have installed the drivers who exactly?
  What Satellite Pro U400 you (U400-xxx)?

• Very slow PC after installing xp sp3

  I recently installed windows xp SP3 on my PC. Once all installed began to go very very slow. I ran avast antivirus, once disabled or uninstalled the PC worked fine, so I removed and replaced by AVG 2011. The same thing is happening again. It seems to be a conflict between the installation of SP3 and both of these virus protection software.

  Does anyone have experience of this and how to fix it?

  Or someone has a suggestion of a different virus software to use?

  Thank you very much

  Hi Gordon,.

  Try the following.

  Method 1: You can check if installing Microsoft Security Essentials of AVG in place can help.

  Method 2: Check to see if this article helps you.

  How to set performance options in Windows XP

  See also:

  Windows XP performance

• Cannot use the mouse after installing windows 7

  Original title: mouse W7 disorders linux Instalation

  Hello

  so I had linux on my computer, but now I myself bought a treat - W7 Home premium 64-bit. So I had wiped the hard disks and clean. Everything worked before (on linux), but while I was installing W7 something must have gone wrong - I couldn t move the mouse , from the moment of the instalation was started - so I thought maybe it s a few pilot missing, but now (after completing the instalation) I ve tried four or five mouse (usb, ps2, usb wireless), but none of them work. I did remember to restart with the mouse still connected. I also tried a different usb port, restart the pc and not even a simple memory card is able to load... and then I thought to try the live CD (it was linux yet) and the mouse works - so tell me, where could be the problem? It seems that there is something wrong with the windows software, but I Don t have an idea what is...

  the keyboard works very well (thankfully), that the screen resolution is still correct ;)

  thx for any helpful answer :)

  Rami

  Hi again once, thank you so :)

  After confirming that it s probably related to drivers, I found a driver CD for my motherboard (I built the computer at home with parts) and learned how to use "mouse keys" and managed to install a few drivers - after restarting the pc, (after some time) everything went very well-> the PC works great now.

  The greatest difficulty before was that I was luckily able to use the "mouse keys" and he kept breaking the feet,, I thought that it s associated with the mouse, but it was just my incompetence :D (I forgot to keep alt + shift)

  Thank you so much, again :)

• Are there known issues using PSE 13 after installing Apple recent 10.10.3 updated on day of Combo to Yosemite?

  I've had Yosemite for some time and bought/installed PES 13 thereafter.

  In the last days, I've upgraded to Yosemite 10.10.3.

  As a novice PSE 13, I worked my way through "Adobe Photoshop elements 13 - classroom in a book". Work through the exercises that I found that my iMac is sometimes take more time to process the functions I am using upgrade prior ro the 10.10.3. For example, using the correction tools, straighten tool etc.

  I struggled with Apple upgrade and had to re - install my machine from a backup Time previous Machine and so I was wondering: -.

  • Are there known issues with PSE 13 post 10.10.3 upgrade?
  • Are there things I should be concerned about the future before accepting an OS X update?

  Thank you

  Andy

  No known issues. However, it is advisable to always remove preferences after updates to the OS X system.

• zbook u15: fan at high speed after installed windows 10

  Yesterday, I updated to windows 7 pro for windows 10 pro.  I have rarely heard my fan in windows 7 and only when I was cad or had a large number of open images.  With 10 windows, my fan is at high speed all the time.

  Suggestions?

  Ok

  Found two programs running that caused the fan to high speed.

  One was post 2012 31% of the processor chips

  other was

  AlertusDesktop or 32% of the processor.

  E-mail private, removed the Alertusdesktop for now and normal operation.

  Thank you!

• I can't connect to my user account after installing XP SP3

  Original title: problems after SP3
  I run Windows XP.  After obtaining the new update SP3, Windows not found my profile when I tried to sign.  So he created a new user profile for me through my husband.  Where are my programs?  I tried to download a "bypass", but no difference.  I tried the system restore, but it cannot restore because my computer had not been changed.  How can I find 'me '?

  Hello

  1. don't you get an error when you try to connect to your account?
  2. do you see any other restore points on your computer?

  Step 1: try to start in safe mode and check if you can connect to your account.

  Refer to this article:
  http://support.Microsoft.com/kb/315222

  Step 2: connect to the newly created user account andcopy all parameters and the content of the previous user
  folder to the new user.

  Refer to this article for help:

  How to copy data from a corrupted to a new profile in Windows XP user profile:
  http://support.Microsoft.com/kb/811151

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printer disappeared after installing Windows SP3

  I have no printer listed now.  I tried to go thru administrative "Printer Spooler" in the system - nothing has worked.

  I get an error "1068", which I can't find something on.  Help!

  I'm sorry. I use Windows XP 2000.

• use of recovery after installing windows free 10 (acer aspire 532-E1-2616)

  My download free windows 10 on my computer acer laptop will affect my recovery program when I need to use it due to virus? in other words, windows 7 will load up with the default settings or him downloaded 10?

  If you use Recovery of Acer, it will make another copy of your recovery.

  https://www.windowscentral.com/how-make-full-backup-Windows-PC