use of recovery after installing windows free 10 (acer aspire 532-E1-2616)

Similar Questions

• Computer OS used to start after installing windows 10

  Hello im having problem starting my system after installing windows 10. I did the install and it worked fine since the upgrade to 8.1. But then I tried to format the drive and in the menu format, he's stuck at 2%, and then I restarted the computer. Now it will hang at the hp logo and go back to the same logo. Do I have to replace my hard drive?

  What I understand, if you have completed the 10 Windows Installer and everything has happened until the end, then you are supposed to be able to do a clean install with the download of Windows 10 DVD or USB.  With a working computer, GO to THIS PAGEand scroll down to the button "download tool" selection the 64-bit version.  Once clicked, it will ask you if you want a DVD or USB for the iso.

  Once it's done and you have the DVD or the USB version, see if you can install Windows 10.  If this fails, you may need to replace the hard drive.

• Problems of Jet 7 HP recovery after installing Windows 10 TP

  Hi all

  A month ago I bought the HP Jet 7. Soon after receiving it, I installed Windows 10 TP, without first create and save an Image of the system to an external drive recovery. While playing with Windows 10 TP, suddenly the touch screen doesn't work anymore, as well as WLAN. The SD card is not recognized eiter (and I can't boot from it). I now can with Windows only when you attach an external USB keyboard. I can't get into the BIOS (power-Volume-down).

  I tried to go back to Windows 8.1, so far without success. I tried the regular Windows recovery mechanisms - all fail. When booting from a USB 2.0 with 8.1 32-bit of Windows Installer source attached to a USB hub powered by bus, at least, I'm able to boot, and I see that your partition 4 is a recovery partition. Yet, when you mount the partition (via DISKPART) to check for recovering images in the 'Images of Windows' folder I only get "access denied".

  Does anyone have tips on how to do to get my stream of HP 7?

  Thanks for reading!

  / Maurice

  Hi all

  After you remove all of the partitions and create the recommended UEFI/GPT partition , I was finally able to install Windows USB 8.1. I guess the reason for all the facilities prior to failure were remnants of W10 Technical Preview (for example, recovery or similar tools). So in short: I had to wipe the hard drive to a successful downgrade.

  -Maurice

• Install Windows 7 on acer aspire E1 - 571G

  Okay so I saw this posted a few times, but is performed a few months ago.

  My problem: bought a new laptop, the material of the love, hate the abomination called 'Windows 8 '.

  My first solution: install from an old boot win7 disk I found lying around my apartment. (can not complain too much about win7).

  NEW problem at hand:

  After you delete the partition of win8 (beginning to think that I would not do), boot from win7 installation disc, all dandy until we reach page "Where do you want to install Windows?" & it gives me an error:

  "Windows cannot be installed to this disk. The selected disk is the GPT partition style. »

  After a little research, I found that this has something to do with legacy mode bios (I changed it in a successful effort to turn off the secure boot), so I go into the bios & change for UEFI, try again: now install win7 is suspended from the page "starting Windows." Please, anyone with some advice.

  1. disable "Secure boot".

  2 - change UEFI to Legacy

  3 format the installation in NTFS partition

  4. install WIndows 7

• Cannot use the mouse after installing windows 7

  Original title: mouse W7 disorders linux Instalation

  Hello

  so I had linux on my computer, but now I myself bought a treat - W7 Home premium 64-bit. So I had wiped the hard disks and clean. Everything worked before (on linux), but while I was installing W7 something must have gone wrong - I couldn t move the mouse , from the moment of the instalation was started - so I thought maybe it s a few pilot missing, but now (after completing the instalation) I ve tried four or five mouse (usb, ps2, usb wireless), but none of them work. I did remember to restart with the mouse still connected. I also tried a different usb port, restart the pc and not even a simple memory card is able to load... and then I thought to try the live CD (it was linux yet) and the mouse works - so tell me, where could be the problem? It seems that there is something wrong with the windows software, but I Don t have an idea what is...

  the keyboard works very well (thankfully), that the screen resolution is still correct ;)

  thx for any helpful answer :)

  Rami

  Hi again once, thank you so :)

  After confirming that it s probably related to drivers, I found a driver CD for my motherboard (I built the computer at home with parts) and learned how to use "mouse keys" and managed to install a few drivers - after restarting the pc, (after some time) everything went very well-> the PC works great now.

  The greatest difficulty before was that I was luckily able to use the "mouse keys" and he kept breaking the feet,, I thought that it s associated with the mouse, but it was just my incompetence :D (I forgot to keep alt + shift)

  Thank you so much, again :)

• K257ca: Recovery after installing Windows 10

  Hello

  I'm currently on Windows 8.1. I have a few questions before moving on to Windows 10:

  1. How can I make a recovery in Windows 10 if I have a problem, a virus...?

  2. make the recovery partition will be usable in Windows 10?

  3 - could I do a restore to restore Windows 10 with all software drivers / preinstalled?

  Thank you

  Hi there @Heisenberg653,

  Thank you for visiting the Forums HP's Support and welcome! It is an excellent site to find answers and ask questions. I read your post on the Forums of HP's Support and I understand you want to know some information about the upgrade of Windows 10 before you go ahead with it.

  Here are the documents for you to read. They have all the answers to your questions.

  1. obtaining of the HP recovery discs or a USB HP recovery disk - HP offers a hard disk recovery solution, but it's always a good idea to have a recovery on a USB storage device solution or discs. A disk or a USB device can be stored in a safe place and used in the case of a hard drive failure, a format of hard drive, or if you change the operating system.

  2. backup of files (Windows, 10, 8) - history of file automatically backup files that are in your contacts list, libraries, Favorites, and your desktop. If the originals are lost, damaged or deleted, you can restore a file or all files. You can also find previous versions of your files from specific dates.

  3. HP Notebook PC - upgrade to Windows 10 - upgrade your laptop for Windows 10 8.1 Windows or Windows 7 by following the instructions in this document. This document also has many categories different information which should be very useful given the questions that you ask before you perform the upgrade to Windows 10.

  Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  Not all drivers are available immediately. Drivers 10 updated Windows will be available and be released as soon as they are available for HP.

  Have a great day!

• SD card is not working properly after installing windows 10

  I have a MacBook Pro (retina, 13 inches, early 2015) with EL Capitan 10.11.5 and after I installed 10 windows using bootcamp, everything worked fine at first, but after I deleted my part of windows and then installed windows 10 the second time, the SD card is not working properly. She mounts only if the computer shuts down first, and then start. If I take the laptop directly, the SD card will not rise. The same thing happens when I switch systems using a control option key or bootcamp Center where when I switched to another system, the SD card that was mounted on the old system does not appear in the new system. I was trying to solve this problem remove the part of windows before you reinstall it again once, so I found that after I deleted the windows part, the problem is gone and it reappeared after installing windows 10 even once. I also found that after I installed windows the total volume of hard drive (128g front) became 121g.

  Hello LorinMax,

  Thanks for this info and choosing the communities Support from Apple. I know the importance of your work with your Macbook Pro SD card!

  If I understand correctly, you cannot use your SD card, unless you stop and then restart. Because this behavior started when you installed Boot Camp, I would start with the following steps:

  1. first of all, start by repairing your hard disk in disk utility to correct the unexpected problems that could be the cause of this behavior.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory.

  Try safe mode if your Mac does not end commissioning

  Graphics performance limited in recovery of OS X or in safe mode

  3. According to Boot Camp Installation & Setup Guide, you may need to back up your personal data and reinstalling OS X, then reinstall Windows via Boot Camp and related support files.

  Boot Camp Installation & Setup Guide

  Backup of your Mac hard drive

  OS X: on OS X Recovery

  See you soon!

• lost touch pad dell drivers after installing Windows updates.

  Separated from this thread.

  I did the update and lost contact dell drivers pad and now I can't play all the games that I got on the computer. The previous update lost my sound card drivers.

  Hi Craig,.

  Thanks for posting your question in the Microsoft Community forums.

  I'm sorry to know that you are facing problems after installing Windows updates.

  Any Windows specific update which is the origin of the problem or you face the problem after installing updates? This is to check if the updates you receive are associated with hard devices.

  To view your history of update, follow these steps:
  a. open Windows Update by sliding into the right edge of the screen (or, if you are using a mouse, pointing to the corner bottom right of the screen, move the mouse upward), tapping or clicking on settings, tapping or clicking change PC settingsand then by typing or clicking on update and recovery.

  b. press or click view update history.

  I wish that you install the Dell Web site touchpad drivers.

  You can refer to this article for the procedure: http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=1JW07

  In addition, if all of the updates are at the origin of the problems with the hardware on the PC, then I suggest you also update the drivers from the Dell Web site chipset.
  See the article:

  Download and update drivers
  http://Windows.Microsoft.com/en-us/Windows-8/all-drivers

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• HP pavilion zv5000: missing zv5000 system drivers of base after installing windows 7

  After installing windows 7 displays device management point exclaimation

  Hardware ID:

  PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C & REV_01
  PCI\VEN_104C & DEV_8201 & SUBSYS_006B103C
  PCI\VEN_104C & DEV_8201 & CC_088000
  PCI\VEN_104C & DEV_8201 & CC_0880

  Also CD-ROM/DVD-rom won't recognize my cd/DVD, but Device Manager shows the work of the unit.

  Need help

  Hello:

  You can use the driver card reader XP support for your laptop and driver page.

  There is no vista or W7 driver for this card reader.

  If auto installation does not work, manually install the driver.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-29677-1 & CC = US & DLC = in & LC = on & os = 228 & Product = 385148 & sw_lang =

• Satellite P300-1This - Microphone does not work after installing Windows 7

  Hello world.

  At first, I'm sorry for my bad English, so I will say in no time.

  A few days ago, I removed a few programs, and I installed the new Windows 7 operating system. Everywhere I had to download the new drivers for the camera because they do not work. After you download the drivers of the camera, the camera become operative (YES!), but later worked for me, a built-in microphone was out of use. What may be of it with the cause and this driver to download and why the microphone not working?

  I can't talk with friends on Skype ;( Help me. I hope you know what I'm saying.

  Hello

  Do you really install any drivers after installing Windows 7? Maybe you have forgotten something and so it doesn t work.
  Micro is a part of webcam so be sure that driver webcam is properly installed and driver sound, you need to as well.

  After that, check the sound settings. Make sure that the Microphone is enabled and test it again with amp active microphone.

• HP Officejet 7612: analysis of problems after installing Windows 10

  After installing Windows (prior to Windows Vista) 10, scan documents with my HP Officejet 7612 became a hell of a job.

  Printing is no problem.

  With Webscan, I can only scan and save 1 page at a time, I can not scan several pages of the document 1 more.

  I downloaded "Extended Scan" but when I try to use this app, it says "year error occurred while scanning" without more information.

  With "HP Scan and capture" I can't scan the size of A3 paper full of documents and there seems to be no possibility to change the size of a3 paper. Maximum size is 'legal letter '.

  Same problem with "Windows Fax and scan."

  Are there other ways to recover the possibilities of full scan from my HP Officejet 7612?

  Hello
  
  Thank you for using the HP Forums.
  
  You can download and install the software COMPLETE features of HP printing for your operating system:

  The following resources will help you:
  
  HP printer install wizard for Windows
  http://ftp.HP.com/pub/softlib/software13/COL50403/MP-150580-2/hppiw.exe
  
  Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
  
  Hope that helps.

• WiFi not detected after installing Windows 7 Ultimate 64 - bit Elitebook 8740w

  Hello

  I used a DVD to install Windows 7 Ultimate 64 - bit to replace Windows 7 Professional 64 - bit on my Elitebook 8740w. In the end, I used a new facility as the upgrade option ended with a failure error. However, after the clean installation, it cannot detect any wifi. What drivers I am likely to need download and re - install?

  Thank you, in advance.

  Kenwin

  Hi, Kenwin:

  Here is the link to the wireless card driver you need:

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=4137878&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_108502_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

• Disc Association file missing after installing windows 7 SP1,.

  After installing windows 7 SP1, trying to open the drives C, D, F, I get error message cannot open, lack assocition file, can someone tell me how to solve this

  Restore the Type Associations by default Windows 7 file Extension:
  http://www.SevenForums.com/tutorials/19449-default-file-type-associations-restore.html

  Change the programs that Windows uses by default:
  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• S3-951: terrible Wi - Fi connection after installing Windows 7

  Hello

  On Monday of this week I bought a new SSD that I used to replace the HARD drive of my Acer Aspire S3 (long out of warranty, unfortunately). Therefore, I had to install new Windows 7 and download all the drivers from the Acer site. However, while before I got the WiFi connection at full power, now I get only one bar, and if I move slightly in the whole House, the connection would be lost and even report no network in sight.

  Could someone help me find a solution to this problem? I don't have access to my recovery partition, otherwise I would have just used it to restore the settings by default when the wireless adapter worked flawlessly.

  Thank you in advance!

  There is a possibility of wire antennas came out the wifi card. You can access it by removing the 12 screws holding the bottom and gently lift the back. If it sticks, use a pick or a card plastic to clear out gently. Be aware of the static elect. damage. Look it up.

• 0 x 80244004 error after installing Windows Update Agent 7.6.7600.256

  After installing Windows Update Agent 7.6.7600.256 22/06/2012, I no longer see the Windows Update page when I run Windows xp and get this error 0 x 80244004, any response?

  Hello

  I saw an answer posted by (DevekY) and it's here:

  (Go to Advanced Setup ESET
  Web and email-> Web access and anti-phishing protection-> HTTP, HTTPS
  Installation scanner HTTPS-> HTTPS filtering mode

  Select "do not use HTTPS protocol control")

  I did this and solved my problem (have no more error 0 x 80244004)

  But what do you think? My computer will not be endangered?

  Thanks a lot for your time to help me.