Use of VI express

Similar Questions

• Extend the iPhone hotspot using an airport express?

  Is it possible to EXTEND - no JOIN - a 6 hotspot iPhone (iOS 9) using an Airport Express station (Terminal AirPort Express 802.11n (1st generation))?

  Sorry, but no.

• Is it possible to use the AirPort Express to AirPlay only? (Wireless)

  Hello

  I have a speaker and I would empower AirPlay for it. I have an old airport express here in my house and I wanted to plug my express from the airport to my wireless network and allow the airplay.

  The only thing I don't want to not remove is the possibility to extend the wireless network, because I'm pretty sure it will do more bad then good, since I was a big of AC very close to the speaker wireless router. (http://www.asus.com/us/Networking/RT-AC5300)

  Is it possible to use the Airport express only airplay? Without trying to extend my network?

  Thanks in advance!

  Kind regards

  Tiago

  Yes, if you have the main router near the speakers... then simply plug the Express into the enclosure of the ethernet... Run it in Bridge mode and turn off wireless... Then check if you can find it in iTunes etc to send the stream of airtime.

  Or you can configure it to join a wireless network... it will not extend... Apple call it client mode.

  AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network

• Can I have the user enter a variable that will be used to Signal Express?

  We seek to use the Signal Express to collect data of analog sensors and load cells. We would like the user to be able to enter a variable that the program Express of Signal can act on. Is it possible within Signal Express?

  Hello

  When you select 'Change destination', it will fill with all stage settings that are supported for the given control used.  Not all the steps or step settings are able to be adjusted when the operator mode.  That is why you were only able to bind controls to step DAQmx Acquire and filter (they are only available to bind in your configuration steps settings).  The forumla node is not able to reference an entry of order of the operator interface. You must manually configure the formula tab of configuration step for that particular step.

  I would recommend if you want that more customized the user interface and approach programming using an application development environment.  Signal Express is ideal for acquisition of signals and perform analysis and basic treatment, but if you want more functionality LabVIEW would be a better option.

• can I use Visual studio express for commercial projects?

  can I use Visual studio express for commercial projects?

  No, this version of visual studio is for purposes of learning and not commercial, if you want to make commercial project, you should get the right edition.

• I can animate individual characters in a block of text using the Wiggle Expression?

  I'm new to after Express and just diving in expressions. I was trying to understand if there was a simple way to use the wiggle expression so that he would wiggle of the individual characters in a text block independently of each other.

  Certainly appreciate any help.

  Have you tried the earthquake selector? Alternatively, you could add a selector expressions and add and raise the expression as follows:

  seedRandom (textIndex, true);

  Wiggle (1,100)

  Dan

• I am using oracle 11g express edition, how I can change the service name and the port number?

  I am using oracle 11g express edition, how I can change the service name and the port number?

  I am using oracle 11g express edition, how I can change the service name and the port number?

  What do you mean by "port number"? HTTP port (usually 8080), or listening port (normally 1521)?

  To change the name of the service, you can use (as a DBA or SYSDBA)

  SQL > alter system set service_name = '';

• Displays the dates of diff using PL/SQL expression for the item "display only"?

  Hello
  I have a single display element -: P2_FROM_Date. If his game, Fri, sat or Sun I want to put the date of the last Monday date. If its Mon, Mar or sea, it must be this date of Monday.
  
  Ex: Today is Friday and last Monday was 18.
  So yesterday, today, tomorrow and Sunday, the date appear as June 18, 2012.
  Since Monday to Wednesday, the date has to be the next that is Monday, June 24, 2012
  
  I tried under 'Source' from the element using PL/SQL expression and the body of the PL/SQL function. Does not
  
  Can anyone help?
  
  Thanks and greetings
  Umer

  1. you must set 'used source' "Always".
  2 If you use a PLSQL function as source type body should set a 'RETURN' statement like this:

  declare
  lv_date number;
  begin
  select to_char(sysdate,'D') into lv_date from dual;
  if lv_date=2 then
    return to_char(sysdate-1);
  end if;
  end;
  

  Published by: mario1977 on June 27, 2012 11:44

• How to call a method defined in AppmoduleImpl using a groovy expression?

  Hi experts,
  
  With the help of jdev 11.1.1.5.0 - adfbc battery.
  
  I followed this post as the blogger says.
  How to call a method defined in AppmoduleImpl using a groovy expression?
  https://blogs.Oracle.com/ADF/entry/how_to_call_a_method
  
  While a button insert hit
  
  Suite error survey.
  

  java.sql.SQLException: ORA-20483: ADM-
  ORA-06512: at "RMSTD.FUNC_FIND_PLNT_DESC", line 22
  ORA-06512: at line 1
  
       at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:457)
       at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
       at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:889)
       at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:476)
       at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:204)
       at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:540)

  It is my code for the function.

  CREATE OR REPLACE FUNCTION func_find_plnt_desc (
     p_bu        VARCHAR2,
     p_plnt_id   VARCHAR2,
     p_lang      NUMBER
  )
     RETURN VARCHAR2
  IS
     CURSOR cur_find_plant
     IS
        SELECT bup_name1, bup_name2
          FROM bus_unit_plants
         WHERE bup_bu = p_bu AND bup_plant_id = p_plnt_id;
  
     rec_find_plant   cur_find_plant%ROWTYPE;
  BEGIN
     OPEN cur_find_plant;
     FETCH cur_find_plant INTO rec_find_plant;
  --RAISE_APPLICATION_ERROR(-20999,P_BU||P_PLNT_ID);
     IF cur_find_plant%NOTFOUND
     THEN
  
        raise_application_error (-20483, 'ADM' || P_PLNT_ID ||'-'||P_BU);
        --NULL;
     END IF;
  
     CLOSE cur_find_plant;
  
     IF p_lang = 1 THEN
        RETURN (rec_find_plant.bup_name1);
     ELSIF p_lang = 2 THEN
        RETURN (rec_find_plant.bup_name2);
     END IF;
  END;
  /

  Reason behind:
  while hitting the insert means null from the value of the survey so error function.
  
  If am not hitting doesn't mean no problem. the function works correctly return description.
  
  can someone help me how to override?
  
  Published by: ADF7 on April 10, 2012 23:51

  ADF7,
  the subject of the post has nothing to do with the question (for as far as I see it).
  As you can see the error message clearly comes from the procedure pl/sql you call the application module, works of groovy appeal method.

  We cannot decide what makes your service if you pass null as a parameter. You can check the settings before you proceed to the procedure or write the procedure in how it treats null parameters.

  Timo

• Discount Pro for cloud Creative if I currently use Final Cut Express?

  Can I get the Pro discount for cloud Creative if I currently use Final Cut Express?

  Hi

  I was watching the promo here:

  http://www.Adobe.com/products/premiere/switch.html

  I also looked on the terms and conditions here:

  http://www.Adobe.com/store/en_US/popup/offer/save30_cs6_prodprem.html

  It seems that it applies only to the Final Cut Pro does not intentionally, sorry

  -Dave

• How can I use a regular expression to validate the email address

  How can I use a regular expression to validate the e-mail address.

  var emailExp:RegExp = /([a-z0-9._-]+?) @([a-z0-9.-] +). ([a - z] {2,4});

• Error using filter with Expression SQL

  Hey all -
  
  New to Oracle BI and have a problem with filters that use the SQL Expressions.
  
  The column I'm filtering is a 4-digit year, expressed as a VARCHAR2(4 byte) in the physical database. My SQL Expression in the filter is:
  
  Column: CAL 4-DIGIT YEAR
  Operator: is in
  SQL expression: TO_CHAR (ADD_MONTHS (SYSDATE,-24), "YYYY"))
  
  When I click on the "Results" tab, I get the following error message:
  Error codes: YQCO4T56:OPR4ONWY:U9IM8TAC:OI2DL65P
  ODBC driver returned an error (SQLExecDirectW).
  State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 27002] Near <>(): syntax error [nQSError: 26012]. (HY000)
  
  I've isolated the problem to the above expression. If I put a literal value and provide a year to four digits as below, it works:
  
  Column: CAL 4-DIGIT YEAR
  Operator: is in
  SQL expression: * 2008. *
  
  Any ideas on what is causing my problem?
  
  Thank you!
  
  Mac

  Yep, this should work, although sometimes you need an extra cast to CHAR.

  It works fine:
  SELECT "D0 time." "" Saw_0 T05 by name of the year ","recipes of F1. " "" Recipes 1-01 (all in all) ' saw_1 'Sample Sales' WHERE 'Time D0. "" T05 by name year ' = CAST (YEAR (TIMESTAMPADD (SQL_TSI_MONTH-24, CURRENT_DATE)) as CHAR) ORDER BY saw_0

  concerning

  John
  http://www.obiee101.blogspot.com/

• Using the Airport Express Terminal as a bridge

  I would like to get video Amazon on my older Blu - ray player.  I was wondering if I could use my old AirportExpress (1st generation) as a bridge.  Now my new Comcast modem connects to my Time Machine that gives me my wireless connection. I tried to connect to the airport & connecting to my Blu - ray via ethernet cable, but I just get a flashing yellow light and the DVD on the screen tells me just the internet connection failed. Is this possible?

  Now my new Comcast modem connects to my Time Machine that gives me my wireless connection.

  I think that you wanted to say that you have a Time Capsule that produces the signal of your wireless network, correct? (Time Machine is a software on your Mac used to back up the Mac on another hard drive).

  I was wondering if I could use my old AirportExpress (1st generation) as a bridge.

  In 'bridge', do you mean you want the AirPort Express to receive a wireless signal of the time and then wireless Capsule to deliver one Ethernet signal to the DVD player?

  The answer is 'yes' to the offer that you really have a 1st generation AirPort Express. To check, look for the model number on the side of the Express in the small print. It starts with an "A" followed four digits.  A 1st Gen AirPort Express is A1264 model number.  What is the number that you see?

  I tried to connect to the airport & connecting to my Blu - ray via ethernet cable, but I just get a flashing yellow light and the DVD on the screen tells me just the internet connection failed

  Assuming you have a 1st Gen Airport Express, the device must be set up and configured to work with time Capsule. The AirPort Express doesn't quite work simply by plugging.

• You can access time capsule iTunes library using the Airport express

  Hello

  I I have an Apple Airport express and listen to music from my iTunes library on my MacBook Pro. I have just bought a Time Capsule from Apple and saved my MacBook to this. I would like to listen to the music of my Time Capsule, as is always on.

  Anyone know if this is possible?

  Thank you

  Unfortunately, your new Time Capsule is not an iTunes server. This is, in itself, it can not stream audio files stored on the internal hard drive to an AirPort Express or Apple TV point. You will still need to use iTunes on your MBP to do. You would just point to the media library on your Time Capsule in the case of iTunes. (Note: However, if your iTunes library is stored on the Time Capsule as a Time Machine backup, this no longer works.) "It will take a stand-alone copy of the one that was on your MacBook.)

• Using an Airport Express to listen to music - ethernet cable or not?

  My wife - who bought me an Airport Express 802.11n Wi - Fi for Christmas - was reassured in a certified store to which he would have a wireless connection to my existing wifi to stream spotify on my stereo, but I could not set up like that. According to Apple's Support, the Airport Express must be connected to a modem via an ethernet cable to work, which totally contradicts the advice she was given. This will not work for me - the stereo is in a completely different room for the modem.

  Who is right?

  I can't find clear indications on the web.

  Thank you very much.

  A "modem" , it's just that... a device that connects to the service of your Internet service provider to another router with a wireless Ethernet cable. "modem" does not any signal wireless... only an Ethernet signal.

  A ' modem/router ' or the 'bridge' is a device that combines the functions of a modem and router wireless in one package. It provides a signal of wireless network for other wireless devices can connect to the Internet wirelessly.  The modem/router or gateway also provides several Ethernet ports... usually 3 or 4... for devices to connect in this way as an option.

  An AirPort Express can only connect to a modem using a wired Ethernet cable connection.

  An AirPort Express can connect to a modem/router or Gateway using either a wired Ethernet connection or a wireless connection.

  Who is right?

  It all depends on if you have a modem... .or you have a modem/router, also called a gateway.

  If you do not know what you... then post back with the number of brand and model of the device that you call your modem... and we will try to find what it is you have.

• I can read two-channel USB-6008 using THE Signal Express?

  Hello world!!

  Is possible to read the two analog inputs at the same time?

  Example: Using Signal Express, I need to read the (channel 0) analog input and analog input (channel 1) at the same time.

  I try this but, the signal on purpose gives me an error message saying that I can't read several channels at the same time using the USB-6008.

  Is this true?

  Thank you

  Ivo João

  André,

  Grato definition of pela.

  SUA ajuda muito util faith.

  SDS,

  Ivo João