Used to install Service Pack2

Similar Questions

• 2012f5 used to install service pack 2

  I have just installed update f5 for LV 2012. I built a program on XP Setup program. Setup fails and requests for service pack 3. It worked and the generation of installation program indicates service Pack2 and above. That's happened?

  I dropped the CAR 429902 document this behavior.

  For now, assume that the XP computers require SP3.

  Please let us know.

• used to install service pack 2

  When I try to install service pack 2, I get an error that says I have to install sp1.  When I try to install SP1 he says that it is already installed.

  I did another clean Vista and loaded SP2 installation before I did the windows updates this time.  I was in charge of Internet Explorer 9 and everything seems to work fine now.  Thanks for your help.

• Cannot install service Pack2 dllcache copy

  Recently reformatted my computer with a new copy of windows XP home. After update service pack 2 during its installation, I get hundreds of reviews saying "cannot copy the abcdefg.dll file to ensure that the location below is correct, or change it and insert"Windows XP files in the drive system, you specify "copy the files from c:\windows\system32\dllcache. If I click on start, I just get the same warning, I have to click Cancel, and then continue Setup. It seems to show this warning on each file from the dllcache folder and I was cancel and continue alone. so far I did it 2 days and did not get through all the files haha. I checked on my hard drive and the dllcache folder exist and all the files, he says: I'm missing are actually in this case, I just have no idea why its not to recognize their. Any input would be appreciated, thanks.

  @Gregory in DC only:

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the page following before otherwise connect the machine to a network or the internet and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Used to install Service Pack 1 for Vista

  I get to the point if I download the sp1, it starts the installation. It goes all the way up to step 3, and then he tells me after a very long time that service Pack 1 installs recovery of changes. Wondering what to do.

  I thought about it myself. I have McAfee and read somewhere that the update will not take if you have mcafee. So he says to disable anti-virus, firewall and software spies. I have done that and restarted my computer. With disabled McAfee, I was able to install the Service pack. Then I re active my McAfee and everything is fixed. Thanks for your help.

• Have installed windows update service pack 1 for vista 10 times and always used to install

  Windows Update has installed 10 times
  even if it's to say that it has installed, it keeps on telling me it must be installed.
  I rebooted several times
  I am running windows vista.

  Help, please!
  Thanks in advance

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Windows Vista will not install Service Pack 1

  Hello, I have an Acer laptop that has Windows Vista 32-bit Basic on it.  I did a factory reset on it and started to update Windows.  It says it installs successfully in 30 seconds about, but when you do another search that Service Pack 1 is found as a update and Service pack 1.  How can I fix it?  I tried the fix it tool and still no luck.

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Cannot install service pack 1 on Vista

  Hello

  can anyone help?

  I changed the hard drive on my PC and re installed vista. Several updates later and am stuck now with service pack 1 do not install it even if he says he has. Because of the incompatibility of IE 7 with the Microsoft Web site, I am unable to download in stand-alone form or download the tool etc. such as documented on the solutions, I googled.

  There is no antivirus outside Defender running nd tried to install firewall on and outside. No idea what it takes now short of forking out for windows 7 or 8.

  Any help greatly received.

  Hello

  If you encounter problems, you can download the stand-alone version on another computer and save to disk.

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• I can not install Service Pack 1 on my Vista Home Premium Edition

  Hello

  I am trying to install on my Windows Vista Home Premium Edition 32-bit Service Pack 1.

  The green bar ends, but there is an error message saying "an internal error has occurred."

  Error code: 0x800703F0

  I don't know what to do, I need to install MS Office 2010 and need service pack 1.

  Please provide opinions on what I should do.

  Alburr

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon

• What version of Microsoft Office installed on a laptop running Windows Vista Home Premium (Service Pack2), 32-bit operating system

  What version of Microsoft Office installed on a laptop running Windows Vista Home Premium (Service Pack2), 32-bit operating system

  Thanks in advance

  Hello

  Microsoft Office 2010

  Microsoft Office 365 is for Windows 7 or higher

  Have you tried to use Microsoft Office Online (free)

  http://Office.Microsoft.com/en-us/collaborate-on-Microsoft-Office-documents-spreadsheets-presentations-and-more-online-FX104341235.aspx

• used to install Vista service pack 2. help please

  I tried to install it twice, just don't install. the progress bar gets all the way through, but it is said that it is impossible to install. I strongly doubt of my drive is full, I have nothing here. and I didn't cancel it... so any help is great!

  Hey sarrade,.

  Please, try the following steps to install Service Pack 2 on your computer.

  The reason why Service Packs are system files corrupted or some third party software conflict or because of some obsolete drivers on the computer.

  But you don't worry why it failed and what is the possible cause of his failure.

  So, here are the steps:

  1. turn off your anti-virus software.

  2. put the computer in a clean boot by following these steps

  a. Click Start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  b. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)
  c. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all.

  Note following this step lets Microsoft services continue to operate. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.
  d. click OK and then click on restart.

  3. disconnect your external devices [basically printers, scanners, do not unplug keyboard or mouse]

  4 turn off your Windows updates by clicking on the evolution of the setting in the Windows Update window. Check do not search for updates.

  5 try to clear Windows Update history.

  1. click on start--> all programs--> accessories--> right click on command prompt - click on run as administrator.

  2. hit enter on each order now.

  C:\WINDOWS\SYSTEM32\services.msc
  
  In the Services window, stop the following services by right-clicking on each of the services.

  a. Background Intelligent Transfer Service

  b. Crytpographic Service.

  c. Windows Update Service.

  3. go back to the command prompt and type these commands.

  Ren catroot2 catroot2.old C:\WINDOWS\SYSTEM32\

  C:\WINDOWS\SYSTEM32\CD...

  C:\WINDOWS\ren c:\Windows\SoftwareDistribution softwaredistribution.old

  Go back to Windows Services and restart the services which we stopped as shown in step 2.

  4. open the Windows Update window and in the lower corner on the left, click installed updates. A list of updates will fill. In the upper right corner in the search box, try searching the KB972036 update.

  If you find this KB972036update, please right-click on the update and uninstall.

  5. close all windows and start downloading these two updates.

  First update: analysis of system - KB947821 update tool

  This is for the 32-bit operating system

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=0435684b-8d12-4028-9cb0-b2903257f1fd&displaylang=en
   
   It is for the 64-bit operating system

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=b950e3b1-3267-41c2-8f10-1fe9a4bfa44d&displaylang=en
   
  Second update: Service Pack 2 for Windows Vista - KB948465

  This is for the 32-bit operating system Service Pack 2

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=a4dd31d5-F907-4406-9012-a5c3199ea2b3

  Is Service Pack 2 for 64-bit operating system

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=656c9d4a-55EC-4972-a0d7-b1a6fedf51a7

  6. download both updates and launch the installation of the first KB947821 update. This update will take 15-20 minutes to install on your computer.

  7. After installing KB947821 update, launch the installation of the Service Pack 2 update KB948465.

  I would like to know once you have completed these steps.

  Good luck sarrade

• Service Pack2 will not install on Vista

  I try to install Service Pack 2 on Vista, but it's just not going to install on my laptop. I tried all the solutions given on the help, for example using rugged, stand alone installation, uninstallation of McAfee, etc with no luck.

  The installation goes through steps 1 and 2 of fine, then get to 100% in step 3, bu, then it gives me a message "Service pack not installed, restore changes" and after about an hour, I get in Vista, where it gives me a message that the installation has been unsuccessful and the details of its says:

  ERROR_SERVICE_CANNOT_ACCEPT_CTRL (0 X 80070425)

  I use a Dell Inspiron 9400.

  Any help will be greatly appreicieted.

  Ian.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack) ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• USED TO INSTALL VISTA SERVICE PACK 2

  USED TO INSTALL WINDOWS VISTA SERVICE PACK 2

  
  I TRIED TO DOWNLOAD AND INSTALL WINDOWS vISTA SERVICE Pack 2 (KB948465) AND AFTER 6 HOURS of INSTALLATION 1 1 I HAVE AVORTE THE PROCESS.__I HAVE REPEATED THE PROCESS TWICE AND THE SAME RESULT - FACILITY No. - CE WHO IS BAD?
  

  Framinghambill,
  First thing to check is to ensure that your system is free of any virus or malware.  Here is a thread with information on cleaning your system: get rid of malware 
  Can I perform a clean boot and try the installation again.  If there is still a problem you can follow the following and test later.

  Disk error checking
  System File Checker
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't install service pack 3, I get an error that ntkrnlpa.exe is in use by another application

  I search on the forum and found that another user had the same problem but nobody answered.

  What happened is that I had a few viruses that my computer shuts down completely.  I have simply no money to buy or update of protection against the virus at the moment.  So, my computer crashed.  Then I had to use my system restore disks to restore my computer.  Then, after that I restored my computer now goes to the blue screen and scans files each time.  At the end of the list is a message: unable to write to the boot sector (according to me, it is said).

  Then I accidentally downloaded a virus.  He was disguised as a MS program and was called FixIt.  I couldn't get down there and he asked for credit card information.  I don't give any information and was able to use a browser to display the McAfee, then remove.  Then I used Malwarebytes to remove some other virus.  Not knowing what else to do, I tried to defrag and received an error message that my C: drive has been corrupted.

  My CD Player no longer works and my computer has problems.  I thought that if I downloaded the FixIt problem, it could solve some of the problems it is to have my computer.  It won't work because I have not installed Service Pack 3.

  When I try to intall Service Pack 3, it extracts files and brings me to setupwizard and then gets up to a certain point, and I get an error message as follows:

  c:\windows\system32\ntkrnlpa.exe file is open or in use by another application.

  I don't know what else to do.  I have everything turned off.  I tried to download and save to my desktop and it still won't work.

  Any help would be greatly appreciated!

  When I ran Process Explorer, I have disabled this file ntkrnlpa.exe.  I couldn't tell what was using this file - but I got the Google Redirect virus, so I thought that a virus has access to this file and prevents me from doing anything.  I don't know if that was the case, it was just my guess that it was what was going on.

  It worked for me.  It temporarily disables this file and then you can install Service Pack 3.

  I received instructions on my site quietfish.ca if you want to check.

• I want to buy xp SP2. Can I use xp service Pack2 legally now?

  Mr President.

  I want to buy the new XP Service Pack 2. My system configuration is not so much to install Windows 7 or Vista.

  I heard that Microsoft has stopped the production of XP Service packs. but in the markets it is still available.

  Can I legally use the XP Service pack 2?

  Please respond immediately.

  Thanking you

  Concerning

  Shaik Mohammed Noor

  If you mean Windowns XP * with * Service Pack 2 - it has been so long, I wouldn't trust to buy from anywhere.

  In addition, you'd really like Windows XP with Service Pack 3.