User cannot access local drives

Similar Questions

• User cannot access network drives.

  Using Anyconnect 2.5 and ASA 5510. When a user connects to the VPN, DNS suffixes change settigs ' Append primary "to"Add these suffixes." (See below)

  The suffix PublicDomain.com is listed as the default domain in group policy. The problem I have is that a particular user can not see the network drives. If I ping the server that drives mapped, I get an audience to an IP address. If I ping server. OfficeComputerDomain.com I have the right internal IP address. So, if I manually change the order and OfficeComputerDomain.com first of all, the user can access without problem network drives. Can I first set up the VPN profile to the OfficeComputerDomain.com list or can I just change the default domain in the group to my internal domain name policy?

  Thank you

  

  Yes, you can change both in the related group policy configuration.

  attributes of group policy
  value by default-field OfficeComputerDomain.com
  Split-dns OfficeComputerDomain.com PublicDomain.com UserHomeDomain.com value

• Why my VPN clients cannot access network drives and resources?

  I have a cisco asa 5505 configured to be a VPN gateway. I can dial using the anyconnect VPN client. The remote user is assigned an IP address to my specifications. However... The remote user cannot access network such as disks in network resources or the fax server. I've done everything I can to set the right settings NAT and ACLs, but in vain. I write my config... If someone can track down the problem. It would be appreciated!

  : Saved

  :

  ASA Version 8.2 (5)

  !

  ciscoasa hostname

  Cisco domain name

  activate the password xxxxxxxxxxxxx

  passwd xxxxxxxxxxxxxxxxx

  names of

  name 68.191.xxx.xxx outdoors

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.201.200 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address outside 255.255.255.0

  !

  passive FTP mode

  DNS domain-lookup outside

  DNS lookup field inside

  DNS server-group DefaultDNS

  192.168.201.1 server name

  Cisco domain name

  permit same-security-traffic inter-interface

  permit same-security-traffic intra-interface

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  object-group network obj - 192.168.201.0

  FREE access-list extended ip 192.168.201.0 NAT allow 255.255.255.0 192.168.201.0 255.255.255.0

  NAT-FREE 192.168.202.0 permits all ip extended access list 255.255.255.0

  FREE access-list extended ip 192.168.202.0 NAT allow 255.255.255.0 any

  Extended access list-NAT-FREE enabled a whole icmp

  allow any scope to an entire ip access list

  allow any scope to the object-group TCPUDP an entire access list

  allow any scope to an entire icmp access list

  inside_access_in of access allowed any ip an extended list

  inside_access_in list extended access allow TCPUDP of object-group a

  inside_access_in list extended access permit icmp any one

  outside_access_in of access allowed any ip an extended list

  outside_access_in list extended access allow TCPUDP of object-group a

  outside_access_in list extended access permit icmp any one

  Standard access list DefaultRAGroup_splitTunnelAcl allow 192.168.201.0 255.255.255.0

  access extensive list ip 192.168.202.0 inside_nat0_outbound allow 255.255.255.0 192.168.201.0 255.255.255.0

  inside_nat0_outbound list extended access permit icmp any one

  inside_nat0_outbound_1 of access allowed any ip an extended list

  pager lines 24

  Enable logging

  asdm of logging of information

  Outside 1500 MTU

  Within 1500 MTU

  mask 192.168.202.1 - 192.168.202.50 255.255.255.0 IP local pool KunduVPN

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  NAT-control

  Global 1 interface (outside)

  NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access

  NAT (inside) 1 192.168.201.0 255.255.255.0

  Access-group outside_access_in in interface outside

  inside_access_in access to the interface inside group

  Route inside 0.0.0.0 0.0.0.0 192.168.201.1 1

  Route inside 0.0.0.0 255.255.255.255 outdoor 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.201.0 255.255.255.0 inside

  http 0.0.0.0 0.0.0.0 outdoors

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  Crypto ca trustpoint ASDM_TrustPoint0

  registration auto

  name of the object CN = ciscoasa

  Keypairs xxx

  Proxy-loc-transmitter

  Configure CRL

  XXXXXXXXXXXXXXXXXXXXXXXX

  quit smoking

  crypto ISAKMP allow outside

  crypto ISAKMP allow inside

  crypto ISAKMP policy 10

  authentication crack

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 20

  authentication rsa - sig

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 30

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 40

  authentication crack

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 50

  authentication rsa - sig

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 60

  preshared authentication

  aes-192 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 70

  authentication crack

  aes encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 80

  authentication rsa - sig

  aes encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 90

  preshared authentication

  aes encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 100

  authentication crack

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 110

  authentication rsa - sig

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 120

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 130

  authentication crack

  the Encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 140

  authentication rsa - sig

  the Encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 150

  preshared authentication

  the Encryption

  sha hash

  Group 2

  life 86400

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  dhcpd outside auto_config

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  SSL-trust outside ASDM_TrustPoint0 point

  WebVPN

  allow outside

  allow inside

  SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

  enable SVC

  tunnel-group-list activate

  internal DefaultRAGroup group strategy

  attributes of Group Policy DefaultRAGroup

  value of 192.168.201.1 DNS server

  VPN-tunnel-Protocol svc webvpn

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl

  Cisco by default field value

  attributes of Group Policy DfltGrpPolicy

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  WebVPN

  SVC request enable

  internal KunduVPN group strategy

  attributes of Group Policy KunduVPN

  WINS server no

  value of 192.168.201.1 DNS server

  VPN-tunnel-Protocol svc webvpn

  Cisco by default field value

  username xxxx

  username xxxxx

  VPN-group-policy DfltGrpPolicy

  attributes global-tunnel-group DefaultRAGroup

  address VPNIP pool

  Group Policy - by default-DefaultRAGroup

  IPSec-attributes tunnel-group DefaultRAGroup

  pre-shared key *.

  tunnel-group DefaultRAGroup ppp-attributes

  ms-chap-v2 authentication

  type tunnel-group KunduVPN remote access

  attributes global-tunnel-group KunduVPN

  address (inside) VPNIP pool

  address pool KunduVPN

  authentication-server-group (inside) LOCAL

  Group Policy - by default-KunduVPN

  tunnel-group KunduVPN webvpn-attributes

  enable KunduVPN group-alias

  allow group-url https://68.191.xxx.xxx/KunduVPN

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:c0e4540d4a07f2c544f0eddb653627cc

  : end

  don't allow no asdm history

  Hello

  What is the IP address of the hosts/servers LAN Gateway?

  If this is not the ASA 'inside' interface IP address then I assume that the problem with VPN is simply routing.

  For example, if your hosts/servers LAN wireless LAN gateway router then the following would happen to your Clients VPN connections.

  • Forms of customers login VPN users through configuring wireless routers static PAT (Port Forward) to interface "inside" ASA
  • Client VPN sends traffic through the VPN to ASA and again the host of the server or LAN.
  • Host/server LAN sees the connection from a network other than the LAN (192.168.202.0/24) and therefore to forward traffic to the default gateway that would likely be the wireless router.
  • Wireless router has no route to the network 192.168.202.0/24 (VPN Pool) and therefore uses its default route to the external network to forward traffic.
  • Client VPN host never received the traffic back as transmitted sound on the external network and abandoned by the ISP

  So if the above assumption is correct, then you would at least need a configuration of the road on the wireless router that tells the device to transfer traffic to the network 192.168.202.0/24 to the 192.168.201.200 gateway IP address (which is the SAA)

  I would like to know if the installation is as described above.

  -Jouni

• Error message: Windows cannot access the specified device path and the second user cannot access the internet

  Original title: I have two users on Vista. We get to the top with windows can not access the specified device path.etc. The other has no problem

  The second user cannot access the internet. Can't access window appears. The other user is not problems.

  Hi Rickravel,

  1. what type of account you use?

  2. This only happens when you access Internet?

  3. when the problem started?

  4. you remember to make changes to the computer before this problem?

  Step 1:

  You can start in safe mode with network and see if the problem occurs in the account.

  You can see the following link to start in safe mode with network.

  Start your computer in safe mode

  Note: Restart the computer to boot into normal mode.

  Step 2:

  If you use Internet explorer, then you can try to disable add ons and check if it helps:

  Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:

  a. click on start

  (b) in the search box, type in Internet explore

  c. Select Internet (no add-on mode)

  If you were able to access the Web site without any problems, then the module may cause the error.

  You can read the following article and try the steps to activate the modules individually determine which Add - ons may be the cause of the problem.

  How the modules of the browser affect my computer?

  Hope this information is useful.

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• BlackBerry Smartphones "Cannot access local files" error when syncing with Outlook

  I have an old BlackBerry Bold 9780 which works well. However, just yesterday, I started getting a "Cannot access local files" error when you try to use BB Desktop to synchronize with Microsoft Outlook 2016. I uninstalled and reinstalled the BlackBerry Desktop Software 7.1, but the problem persists. There is no error when using Outlook or other aspects of synchronization in BB Desktop.

  I am running 64-bit Windows 10 on my desktop computer. I got no synchronization issues in the past until yesterday. To my knowledge, nothing has changed.

  A Google search for the error message returns questions posted on several different forums, but there is no clear solution given.

  The problem seems to be in Outlook, rather than with the BlackBerry Desktop, at least in my case. I solved it by repairing my Microsoft Office installation. For most versions of Office, this is accomplished by going to the list of programs installed in the Control Panel, highlight and right-click on the desktop and select the option to repair or change.

• BlackBerry Smartphones "Cannot access local files" error when syncing with Outlookl

  I have an old BlackBerry Bold 9780 which works well. However, just yesterday, I started getting a "Cannot access local files" error when you try to use BB Desktop to synchronize with Microsoft Outlook 2016. I uninstalled and reinstalled the BlackBerry Desktop Software 7.1, but the problem persists. There is no error when using Outlook or other aspects of synchronization in BB Desktop.

  I am running 64-bit Windows 10 on my desktop computer. I got no synchronization issues in the past until yesterday. To my knowledge, nothing has changed.

  A Google search for the error message returns questions posted on several different forums, but there is no clear solution given.

  The problem seems to be in Outlook, rather than with the BlackBerry Desktop, at least in my case. I solved it by repairing my Microsoft Office installation.  For most versions of Office, this is accomplished by going to the list of programs installed in the Control Panel, highlight and right-click on the desktop and select the option to repair or change.

• To access local drives using pcoip

  Hello

  Anyone have any suggestions on how to access local drives with the client VMware View with pcoip?  Is there a way to move the disks similar to how the Protocol RDP t - it?

  Thank you

  Jeremy

  You might be able to get around with some scripts.  You can get the fat client the name of 'Unstable environment' section of the registry on the virtual machine, and then from there, you can map a drive with a login script or such.  Is not ideal, but based on your security requirements, pool type and size of deployment, it is a possibility.

• New user cannot access any area of activity

  Hi, I use Discoverer Desktop 9.0.4.43.17 and administrator of 9.0.4.43.18 and I have a new user cannot access any sector of activity, I tried to create a new business district to test and access the Security window on the Client of Directors for this user and my user (works very well!), for my user that this new BA shows normally on the desktop but for new user the selection of business on Assistant workbook area shows nothing. It's something to measure new users to access the space business?
  
  Published by: user2997975 on 06/04/2009 07:19

  Hello
  As suggested by Rod it sounds as if you may have several EUL in the same prod73. Try to connect again, but this time go to tools | Options and click the EUL. It is the last tab on the right side and you may need to click the button to the right (next to connection) several times before seeing the EUL tab.

  Under the EUL tab, make sure that the EUL you want to connect is selected. If it is bad you will need to change it, click on the OK button and then reconnect to the database using file | Connect to the database.

  This time you must point to the right EUL.

  Best wishes
  Michael

• Set security on 'Decline' for users of Windows/object, cannot access a drive C and d. 'Access denied'-[[problem solved]]

  last updated *.

  Problem is SOLVED. Read my response at the bottom of this thread.

  * Update *.

  Solved for drive D as now but it is still not accessible. Help the Microsoft Experts kindly. By clicking on the C drive, I got "access denied."

  Hello world.

  I need help. I have windows 8, 64 bit computer laptop.  This system has 3 active accounts now. Account_One that is my administrator account. I have another

  "limited account" created on my machine Account_two and the third one is "Guest account" account that is enabled.

  Before you lend my cell phone to a friend in Account_two login I tried to restrict access to drives C and D of this Account_two which is a limited account.

  While I was doing it, I put approval for object 'Windows users' 'decline '. This object is usually the last in the list of objects on the window that appears when we sail to click with the right button on C drive > properties > Security. I realized that instead of

  for Account_two I did for Windows users / which means maybe Windows/users / * which covered my admin account too and that too on the drive root C.

  When I connected to my Account_one account that is an administrator account, I'm not able to access drive C and D where I put the authorization of 'decline' for all the attributes as shown above to object/Windows users.

  One of the folder that was on my desktop allows me to go inside the d drive as I kept this shortcut for easy access, but there is no way to navigate from c or d ' training on domestic issues. Not just me even Windows can not access important services such as 'Restore' and many others built in utilities of windows which simply will not charge blinking message windows has no access to it!

  Please help how to access drive C and D for my administrator account. I am connected to this account now, but can not access drive C or d. when I go to the Security tab in the drive C and D right click Properties I get the screen it as: you must have read allowed to view the properties of this object. Click Advanced to continue. When I click on advanced, I see the "advanced security settings for local disk (d :)), where the owner is presented as: unable to display current owner."  Exchange (Link) when I click on 'Change' I get the error message: cannot open access control editor access is denied.

  So I put the Windows/user object to "deny" on the tab security for all read and writes, and I'm not able to access anything whatsoever since my administrator account.

  Please let me know how to change access to 'allow' for c and D drive for the object user/Windows. From now there is no way to access this object by result cannot set permissions there.

  Help, please.

  Thank you very much.

  Thank you very much.

  Problem is SOLVED!

  After three days of effort I was finally able to fix this mess.  It took me three days after going through many similar positions as mine but no final answer or fix, so I kept

  through the 'access denied' messages on this community and won an idea on what

  had happened and what needed to be done. What I found that there are several hundred people

  like me, who have faced this problem and there is no final official help file to explain how to fix

  He IS but he MICROSFT official 'support chat' where they ask for $149 to connect remotely and difficulty

  the problem!

  in any case, here's how I solved my problem for people who need to fix it in case it happens to you.

  How the problem began; Read my original post above on top. In short, I set the security setting to refuse to

  Users of Windows/under the Security tab that comes after a right click drive then properties > Security. I put it and lost access to all readers!

  How I fixed it.

  Thanks to some nice people on this page of the community who have posted knowledge. A man had displayed the creation of "Administrator" "guest account of orders that I did now, I could sign out of my account and get on the 'Administrator' account with admin privileges so that I could fix it the mess on my account problem. So if you have similar problem first create the command prompt administrator account. However this only solved the problem partially as I could reverse the problem only on drive D and not on the drive C. I was able to go to security settings and set the properties 'allow' for drive D, but I was not able to read the page of security for drive C as he said I haven't read privilege he even newly created admin account.

  Now if I needed the "Access denied" problem on drive C. I continued through messages of so many "access denied" here and discovered about utilities like SFC, TAKEOWN, ICACLS, but none of them worked from the command prompt I always said "access denied."

  Thing was to take the mouse to the right of the screen and get this blue bar, then settings > change PC settings > General - Advanced startup-press the button -. Then he made up the blue screen, where you have the option called troubleshooting... go there and then advanced setting > look to start Windows from the command prompt. Do you have a command prompt with C:\windows\system32 on the command prompt. Here, my order was accepted both takeown and icacls. If I shot a command there: TAKEOWN /F /R C:\/a and I also tried icacls to give permissions after checking using the syntax on the command line itself. All commands ran successfully this time, but be careful what you give in the command. It's under a lien high built based on the account of Windows 8.

  Takeown command executed successfully and it solved my problem. I leave the command prompt then connected to this administrator account. This time, I could go to the Security tab of the C drive and set allow it for users here. Still on some issues, I was getting no access permission, but I was asked to change it to allow me to access to and I was able to do.

  For access to the C drive on the Security tab, you need to go to the 'Advanced' and change the owner too.

  in any case I'm happy this is finally resolved even if I wasn't getting much help responds I used the previous positions of other threads to solve.

  Since he was not an official help of WINDOWS or MICROSOFT on that page, I'm sure I did the security setting while making the methods of trial and error on my machine which may not be the right setting from the point of view of security in general, so I'll try to reset the default state machine as my problem is now solved.

  So I fixed it. If you need help let me know and I'll try to help you, and I do not charge $149 or $99.  ;-)

• AnyConnect VPN users cannot access remote subnets?

  I googled this until blue in the face without result.  I don't understand why Cisco this so difficult?  When clients connect to the anyconnect vpn, they can access the local subnet, but cannot access the resources in remote offices.  What should I do to allow my anyconnect vpn clients access to my remote sites?

  Cisco 5510 8.4

  Hello

  What are remote sites using as Internet gateway? Their default route here leads to the ASA or have their own Internet gateway? If they use this ASA for their Internet connection while they should already have a default route that leads traffic to the VPN to the pool, even if they had no specific route for the VPN itself pool. If they use their own local Internet gateway and the default route is not directed to this ASA then you would naturally have a route on the remote site (and anything in between) indicating the remote site where to join the pool of 10.10.224.0/24 VPN network.

  In addition to routing, you must have configured for each remote site and the VPN pool NAT0

  Just a simple example of NAT0 configuration for 4 networks behind the ASA and simple VPN field might look like this

  object-group network to REMOTE SITES

  object-network 10.10.10.0 255.255.255.0

  object-network 10.10.20.0 255.255.255.0

  object-network 10.10.30.0 255.255.255.0

  object-network 10.10.40.0 255.255.255.0

  network of the VPN-POOL object

  10.10.224.0 subnet 255.255.255.0

  NAT static destination DISTANCE-SITES SITES source (indoor, outdoor) REMOTE static VPN-VPN-POOL

  The above of course assumes that the remote site are located behind the interface 'inside' (although some networks, MPLS) and naturally also the remote site networks are made for the sake of examples.

  Since you are using Full Tunnel VPN should be no problem to the user VPN transfer traffic to this ASA in question.

  My first things to check would be configuring NAT0 on the ASA and routing between remote sites and this ASA (regarding to reach the VPN pool, not the ASA network IP address)

  Are you sure that the configuration above is related to this? Its my understanding that AnyConnect uses only IKEv2 and the foregoing is strictly defined for IKEv1?

  -Jouni

• Blue screen error CANNOT ACCESS HARD DRIVE SPACE

  I'm trying to install windows xp after removing windows 8 of my computer and creat new partition using the boot disk windows 98se, fdisk, but the installation during windows startup I get in trouble when get a blue error message screen telling
  "YOUR COMPUTER'S STARTUP PROGRAM CANNOT ACCESS THE DISK THAT CONTAINS THE PARTITION FREE SPACE, YOU CHOOSE. CANNOT INSTALL WINDOWS XP ON THIS HARD DRIVE. »
  Image of the screen available message if necessary. There is no error due to this error code.
  Please help me to solve the problem, and I'll be really thankful to you.
  Kind regards
  Kay

  First of all, you need not use a setup of Windows 98 to work partition disk before installing Windows XP, Setup of Windows XP has the tools to do this job.

  Windows XP Setup cannot see the hard drive as it doesn't have drivers for the SATA controller on board.  To install Windows XP you must go into the BIOS and put the hard drive in IDE mode you will need to integrate the SATA drivers in the XP installation CD, or you need to feed them to the Windows XP Installer with a floppy using the F6 method drive.

  Your new PC does support Windows XP, it has Windows XP drivers available for it?  If this isn't the case, you will have a lot of crying by train to get there.

  John

• Cannot access the drive after you type the correct password for BitLocker. Access is denied.

  Hi all!

  I really have a problem with my disc drive BitLocker encrypted.

  On my PC at the beginning (from 2009), with OS win7, I encrypted my external WD 500 GB MY BOOK hard drive.

  Unfortunately, old PC died:(et il y a un problème.)

  Now on my new computer with win7 OS or another, I can't access my WD 500 GB MY BOOK external hard drive?

  my first try the solution: I try to unlock the drive with my correct password and everything seems OK, drive is unlocked, but when I try to enter the disk I have the popup alert message: location is not available. J:\ is not available. Access is denied.

  After that, I try another option.

  try my second solution: In Control Panel > system and security > BitLocker Drive Encriptación I chose my encrypted disk and try to decrypt the drive. After maybe 7 hours and 99 percent, I got a pop-up message with the error. I don't remember now exactly how was the message.

  Now, when I log on windows, on another device (laptop) when I attach my WD 500 GB MY BOOKoutside, drive in my computer , I have the following status: my external WD MY BOOK 500 GBhard drive is unlocked, visible and recognized as a drive J:\, but I can't access it.

  When I try to enter again the drive, I have the popup alert message: location is not available. J:\ is not available. Access is denied.

  Also, I have the correct password and BitLocker recovery key stored correctly the USB onmy.

  Help, please

  Best.
  

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  Try changing the permissions on the drive for access.

  a. go to "Computer".

  b. right-click on drive J and choose Properties.

  c. click the 'Security' tab and see if your current user is displayed in the ' group or user names " list. If not, please click on the Add button, type the name of your current user account in the "enter the names of the objects to select " box, then click 'OK' to add this group.

  d. Select the user from the list, then check the box 'Allow' next of ' Full Control '.

  e. click on the Advanced button, and then click the 'Owner' tab. Then, press the button "Edit" .

  f. Select current user in the list and check the box "replace the owner of subcontainers and objects".

  g. click 'OK' to save the changes and wait for Windows to transfer ownership of all objects on the partition.

  h. click OK to save the changes and exit the Properties window.

  Check if you are able to access the drive.

  You can also check: BitLocker Drive Encryption Step Guide for Windows 7

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• VPN users cannot access Tunnel

  Hi all

  I have a problem, I have 2 sites both with ASA 5520, they are both connected via a site to site VPN.

  It works very well all users in site A can access resources in site B and vice versa.

  The problem comes when a user connects to a remote user VPN site has they cannot access or anything in site B same ping if the FW them delivers an ip address in the range for the site.

  Im sure there is something simple that I missed.

  Thank you

  If the VPN Client pool is in the same subnet as the site of A LAN, then you are probably missing just the following:

  (1) check if you have divided political tunnel, and site-B LAN is included in the ACL split tunnel.

  (2) configure 'same-security-traffic permit intra-interface' on the site A ASA.

  If the above has been configured, please share configuration the two ASA to further check where it is.

• Standard user cannot access program (event id 882) installed on windows 7 home 64 bit.

  It's driving me crazy.  Whenever a user attempts to open a program already installed, nothing happens.  The event viewer displays the event id 882.  The laptop is running windows 7 home so it doesn't have the local security policy that I can change.  How to disable this check or allow the program is accessible by standard users?

  I solved the problem.  I downloaded and installed gpedit.msc following the instructions here - http://www.askvg.com/how-to-enable-group-policy-editor-gpedit-msc-in-windows-7-home-premium-home-basic-and-starter-editions/

  Once this was done, I was able to change the policy to allow the user to access the new application.