User cannot access network drives.
Using Anyconnect 2.5 and ASA 5510. When a user connects to the VPN, DNS suffixes change settigs ' Append primary "to"Add these suffixes." (See below)
The suffix PublicDomain.com is listed as the default domain in group policy. The problem I have is that a particular user can not see the network drives. If I ping the server that drives mapped, I get an audience to an IP address. If I ping server. OfficeComputerDomain.com I have the right internal IP address. So, if I manually change the order and OfficeComputerDomain.com first of all, the user can access without problem network drives. Can I first set up the VPN profile to the OfficeComputerDomain.com list or can I just change the default domain in the group to my internal domain name policy?
Thank you
Yes, you can change both in the related group policy configuration.
attributes of group policy
value by default-field OfficeComputerDomain.com
Split-dns OfficeComputerDomain.com PublicDomain.com UserHomeDomain.com value
Tags: Cisco Security
Similar Questions
-
Why my VPN clients cannot access network drives and resources?
I have a cisco asa 5505 configured to be a VPN gateway. I can dial using the anyconnect VPN client. The remote user is assigned an IP address to my specifications. However... The remote user cannot access network such as disks in network resources or the fax server. I've done everything I can to set the right settings NAT and ACLs, but in vain. I write my config... If someone can track down the problem. It would be appreciated!
: Saved
:
ASA Version 8.2 (5)
!
ciscoasa hostname
Cisco domain name
activate the password xxxxxxxxxxxxx
passwd xxxxxxxxxxxxxxxxx
names of
name 68.191.xxx.xxx outdoors
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.201.200 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address outside 255.255.255.0
!
passive FTP mode
DNS domain-lookup outside
DNS lookup field inside
DNS server-group DefaultDNS
192.168.201.1 server name
Cisco domain name
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
object-group Protocol TCPUDP
object-protocol udp
object-tcp protocol
object-group network obj - 192.168.201.0
FREE access-list extended ip 192.168.201.0 NAT allow 255.255.255.0 192.168.201.0 255.255.255.0
NAT-FREE 192.168.202.0 permits all ip extended access list 255.255.255.0
FREE access-list extended ip 192.168.202.0 NAT allow 255.255.255.0 any
Extended access list-NAT-FREE enabled a whole icmp
allow any scope to an entire ip access list
allow any scope to the object-group TCPUDP an entire access list
allow any scope to an entire icmp access list
inside_access_in of access allowed any ip an extended list
inside_access_in list extended access allow TCPUDP of object-group a
inside_access_in list extended access permit icmp any one
outside_access_in of access allowed any ip an extended list
outside_access_in list extended access allow TCPUDP of object-group a
outside_access_in list extended access permit icmp any one
Standard access list DefaultRAGroup_splitTunnelAcl allow 192.168.201.0 255.255.255.0
access extensive list ip 192.168.202.0 inside_nat0_outbound allow 255.255.255.0 192.168.201.0 255.255.255.0
inside_nat0_outbound list extended access permit icmp any one
inside_nat0_outbound_1 of access allowed any ip an extended list
pager lines 24
Enable logging
asdm of logging of information
Outside 1500 MTU
Within 1500 MTU
mask 192.168.202.1 - 192.168.202.50 255.255.255.0 IP local pool KunduVPN
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT-control
Global 1 interface (outside)
NAT (inside) 0 inside_nat0_outbound_1 list of outdoor access
NAT (inside) 1 192.168.201.0 255.255.255.0
Access-group outside_access_in in interface outside
inside_access_in access to the interface inside group
Route inside 0.0.0.0 0.0.0.0 192.168.201.1 1
Route inside 0.0.0.0 255.255.255.255 outdoor 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
Enable http server
http 192.168.201.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown cold start
Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA
Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA
Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
outside_map interface card crypto outside
Crypto ca trustpoint ASDM_TrustPoint0
registration auto
name of the object CN = ciscoasa
Keypairs xxx
Proxy-loc-transmitter
Configure CRL
XXXXXXXXXXXXXXXXXXXXXXXX
quit smoking
crypto ISAKMP allow outside
crypto ISAKMP allow inside
crypto ISAKMP policy 10
authentication crack
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 20
authentication rsa - sig
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 30
preshared authentication
aes-256 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 40
authentication crack
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 50
authentication rsa - sig
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 60
preshared authentication
aes-192 encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 70
authentication crack
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 80
authentication rsa - sig
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 90
preshared authentication
aes encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 100
authentication crack
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 110
authentication rsa - sig
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 120
preshared authentication
3des encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 130
authentication crack
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 140
authentication rsa - sig
the Encryption
sha hash
Group 2
life 86400
crypto ISAKMP policy 150
preshared authentication
the Encryption
sha hash
Group 2
life 86400
Telnet timeout 5
SSH timeout 5
Console timeout 0
dhcpd outside auto_config
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
SSL-trust outside ASDM_TrustPoint0 point
WebVPN
allow outside
allow inside
SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image
enable SVC
tunnel-group-list activate
internal DefaultRAGroup group strategy
attributes of Group Policy DefaultRAGroup
value of 192.168.201.1 DNS server
VPN-tunnel-Protocol svc webvpn
Split-tunnel-policy tunnelspecified
value of Split-tunnel-network-list DefaultRAGroup_splitTunnelAcl
Cisco by default field value
attributes of Group Policy DfltGrpPolicy
Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn
WebVPN
SVC request enable
internal KunduVPN group strategy
attributes of Group Policy KunduVPN
WINS server no
value of 192.168.201.1 DNS server
VPN-tunnel-Protocol svc webvpn
Cisco by default field value
username xxxx
username xxxxx
VPN-group-policy DfltGrpPolicy
attributes global-tunnel-group DefaultRAGroup
address VPNIP pool
Group Policy - by default-DefaultRAGroup
IPSec-attributes tunnel-group DefaultRAGroup
pre-shared key *.
tunnel-group DefaultRAGroup ppp-attributes
ms-chap-v2 authentication
type tunnel-group KunduVPN remote access
attributes global-tunnel-group KunduVPN
address (inside) VPNIP pool
address pool KunduVPN
authentication-server-group (inside) LOCAL
Group Policy - by default-KunduVPN
tunnel-group KunduVPN webvpn-attributes
enable KunduVPN group-alias
allow group-url https://68.191.xxx.xxx/KunduVPN
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:c0e4540d4a07f2c544f0eddb653627cc
: end
don't allow no asdm history
Hello
What is the IP address of the hosts/servers LAN Gateway?
If this is not the ASA 'inside' interface IP address then I assume that the problem with VPN is simply routing.
For example, if your hosts/servers LAN wireless LAN gateway router then the following would happen to your Clients VPN connections.
- Forms of customers login VPN users through configuring wireless routers static PAT (Port Forward) to interface "inside" ASA
- Client VPN sends traffic through the VPN to ASA and again the host of the server or LAN.
- Host/server LAN sees the connection from a network other than the LAN (192.168.202.0/24) and therefore to forward traffic to the default gateway that would likely be the wireless router.
- Wireless router has no route to the network 192.168.202.0/24 (VPN Pool) and therefore uses its default route to the external network to forward traffic.
- Client VPN host never received the traffic back as transmitted sound on the external network and abandoned by the ISP
So if the above assumption is correct, then you would at least need a configuration of the road on the wireless router that tells the device to transfer traffic to the network 192.168.202.0/24 to the 192.168.201.200 gateway IP address (which is the SAA)
I would like to know if the installation is as described above.
-Jouni
-
User cannot access local drives
Win7 - 64 bit - new out of the box – users of local computers work fine - joined the field - add a domain user as a domain account user - user 'all programs' missing - administrator can access the shares of domain - domain user cannot see local readers - domain cannot run command line programs - domain user has been deleted and restored - changed permissions on the C drive for everyone «» total control"= thank you
Hi Thensley,
Thanks for posting your query in Microsoft Community.
I understand that you have problems with the domain user account.
The question you have posted is would be better suited to the Technet community.
Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads
Hope it will be useful. If you still have questions, please reply and we will be happy to help you.
-
Showing in the form of folder icon and cannot access network drive icon
Hi team,
The network drive that I drew in my computer using my profile isn't allowing me to access.
The network drive icon shows as a folder icon and it says access denied even if I have the permissions to access the file on the server.
The server we use is the exchange Server 2003.
But I am able to access the files inside the drive using the Option RUN as well as Address bar in my computer.
And I am able to access the folder on the server without any problem.
The operating system I use is Windows XP.
But it worked for someone else, when I deleted a file named autorun.inf in the folder of the shared drive on the server!
Could you please tell me what is autorun.inf and he really causes this problem in the drive on the server or is there any other reason.
Thanks in advance for the help.
Hi Rani Jhansi,
Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer
-
Domain user on the laptop cannot access network folders
I have a user who has a laptop with Windows 7 Pro. The laptop is on the field. A week ago, some of its readers mapped network disappeared from his window of the computer - they have been set up with a logon script. When I tried remap readers, I got an error that the readers were already mapped with other identification information.
I tried to use wired and wireless and disabling NetBIOS. I tried to sign up with my own account, and after that my profile has been created I was able to access network drives without any problems, that tells me that this isn't a hardware problem.
I took a look in C:\Users and found 2 records for his profile, one named [username], another named [username]. [domain]. The [user name]. There is a padlock icon that tells me that it is the account currently being logged record [field]. However, records (e.g. office) are all empty, so it is somehow redirecting to the files under the profile of [username]. I backed up and deleted the registry key for its profile and restarted the computer, but this only created a NEW temporary folder called [username]. [domain]. 000.
Short to save all files in [user_name] and suppression of all profiles or do a clean install of Windows is there anything else I can try?
When I tried remap readers, I got an error that the readers were already mapped with other identification information.
-> The command console
net use
tell you what actions are mapped. And the console command
NET use * / del
Removes all existing connections to share.
I tried to use wired and wireless and disabling NetBIOS.
-> Ping your server would immediately you tell if you have network connectivity.
The [user name]. There is a padlock icon that tells me that it is the account currently being logged record [field].
-> How to lock that only takes into account with administrator privileges have access to this folder.
I backed up and deleted the registry key for its profile and restarted the computer, but this only created a NEW temporary folder called [username]. [domain]. 000.
->, You can force Windows to use a given profile folder manually by setting the name of the folder here:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\ProfileList\S...\ProfileImagePath
Search for the incorrect path name (. domain.000 [username]), and then change the path.
Your questions are indeed more suited for a TechNet forum.
-
Original title: I have two users on Vista. We get to the top with windows can not access the specified device path.etc. The other has no problem
The second user cannot access the internet. Can't access window appears. The other user is not problems.
Hi Rickravel,
1. what type of account you use?
2. This only happens when you access Internet?
3. when the problem started?
4. you remember to make changes to the computer before this problem?
Step 1:
You can start in safe mode with network and see if the problem occurs in the account.
You can see the following link to start in safe mode with network.
Start your computer in safe mode
Note: Restart the computer to boot into normal mode.
Step 2:
If you use Internet explorer, then you can try to disable add ons and check if it helps:
Run Internet explorer with no Add - ons. Steps to open Internet with no mode of modules:
a. click on start
(b) in the search box, type in Internet explore
c. Select Internet (no add-on mode)
If you were able to access the Web site without any problems, then the module may cause the error.
You can read the following article and try the steps to activate the modules individually determine which Add - ons may be the cause of the problem.
How the modules of the browser affect my computer?
Hope this information is useful.
-
Can not access network drives after installation of Windows 8 Pro
Hi all
I have a concern with a PC in Windows 8.
I am rebuilding a new laptop for a user. Successfully, I added to the domain and assigned privileges for the user. When I try to log on to the PC with the new user account, I can not access network drives. When I log in with my account, I am able to access the network without problem drives.
When I'm on the user account I can see the other computers on the network as well. But for some reason I can't access network drives. Other computers on the domain are running Windows 7 Professional.Can someone help me with this?
Thank you
Hello
As you are on a domain, I suggest you to post your query in the TechNet forum.
http://social.technet.Microsoft.com/forums/en-us/w8itpronetworking/threads
I hope this helps.
-
Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
New user cannot access any area of activity
Hi, I use Discoverer Desktop 9.0.4.43.17 and administrator of 9.0.4.43.18 and I have a new user cannot access any sector of activity, I tried to create a new business district to test and access the Security window on the Client of Directors for this user and my user (works very well!), for my user that this new BA shows normally on the desktop but for new user the selection of business on Assistant workbook area shows nothing. It's something to measure new users to access the space business?
Published by: user2997975 on 06/04/2009 07:19Hello
As suggested by Rod it sounds as if you may have several EUL in the same prod73. Try to connect again, but this time go to tools | Options and click the EUL. It is the last tab on the right side and you may need to click the button to the right (next to connection) several times before seeing the EUL tab.Under the EUL tab, make sure that the EUL you want to connect is selected. If it is bad you will need to change it, click on the OK button and then reconnect to the database using file | Connect to the database.
This time you must point to the right EUL.
Best wishes
Michael -
last updated *.
Problem is SOLVED. Read my response at the bottom of this thread.
* Update *.
Solved for drive D as now but it is still not accessible. Help the Microsoft Experts kindly. By clicking on the C drive, I got "access denied."
Hello world.
I need help. I have windows 8, 64 bit computer laptop. This system has 3 active accounts now. Account_One that is my administrator account. I have another
"limited account" created on my machine Account_two and the third one is "Guest account" account that is enabled.
Before you lend my cell phone to a friend in Account_two login I tried to restrict access to drives C and D of this Account_two which is a limited account.
While I was doing it, I put approval for object 'Windows users' 'decline '. This object is usually the last in the list of objects on the window that appears when we sail to click with the right button on C drive > properties > Security. I realized that instead of
for Account_two I did for Windows users / which means maybe Windows/users / * which covered my admin account too and that too on the drive root C.
When I connected to my Account_one account that is an administrator account, I'm not able to access drive C and D where I put the authorization of 'decline' for all the attributes as shown above to object/Windows users.
One of the folder that was on my desktop allows me to go inside the d drive as I kept this shortcut for easy access, but there is no way to navigate from c or d ' training on domestic issues. Not just me even Windows can not access important services such as 'Restore' and many others built in utilities of windows which simply will not charge blinking message windows has no access to it!
Please help how to access drive C and D for my administrator account. I am connected to this account now, but can not access drive C or d. when I go to the Security tab in the drive C and D right click Properties I get the screen it as: you must have read allowed to view the properties of this object. Click Advanced to continue. When I click on advanced, I see the "advanced security settings for local disk (d :)), where the owner is presented as: unable to display current owner." Exchange (Link) when I click on 'Change' I get the error message: cannot open access control editor access is denied.
So I put the Windows/user object to "deny" on the tab security for all read and writes, and I'm not able to access anything whatsoever since my administrator account.
Please let me know how to change access to 'allow' for c and D drive for the object user/Windows. From now there is no way to access this object by result cannot set permissions there.
Help, please.
Thank you very much.
Thank you very much.
Problem is SOLVED!
After three days of effort I was finally able to fix this mess. It took me three days after going through many similar positions as mine but no final answer or fix, so I kept
through the 'access denied' messages on this community and won an idea on what
had happened and what needed to be done. What I found that there are several hundred people
like me, who have faced this problem and there is no final official help file to explain how to fix
He IS but he MICROSFT official 'support chat' where they ask for $149 to connect remotely and difficulty
the problem!
in any case, here's how I solved my problem for people who need to fix it in case it happens to you.
How the problem began; Read my original post above on top. In short, I set the security setting to refuse to
Users of Windows/under the Security tab that comes after a right click drive then properties > Security. I put it and lost access to all readers!
How I fixed it.
Thanks to some nice people on this page of the community who have posted knowledge. A man had displayed the creation of "Administrator" "guest account of orders that I did now, I could sign out of my account and get on the 'Administrator' account with admin privileges so that I could fix it the mess on my account problem. So if you have similar problem first create the command prompt administrator account. However this only solved the problem partially as I could reverse the problem only on drive D and not on the drive C. I was able to go to security settings and set the properties 'allow' for drive D, but I was not able to read the page of security for drive C as he said I haven't read privilege he even newly created admin account.
Now if I needed the "Access denied" problem on drive C. I continued through messages of so many "access denied" here and discovered about utilities like SFC, TAKEOWN, ICACLS, but none of them worked from the command prompt I always said "access denied."
Thing was to take the mouse to the right of the screen and get this blue bar, then settings > change PC settings > General - Advanced startup-press the button -
. Then he made up the blue screen, where you have the option called troubleshooting... go there and then advanced setting > look to start Windows from the command prompt. Do you have a command prompt with C:\windows\system32 on the command prompt. Here, my order was accepted both takeown and icacls. If I shot a command there: TAKEOWN /F /R C:\/a and I also tried icacls to give permissions after checking using the syntax on the command line itself. All commands ran successfully this time, but be careful what you give in the command. It's under a lien high built based on the account of Windows 8. Takeown command executed successfully and it solved my problem. I leave the command prompt then connected to this administrator account. This time, I could go to the Security tab of the C drive and set allow it for users here. Still on some issues, I was getting no access permission, but I was asked to change it to allow me to access to and I was able to do.
For access to the C drive on the Security tab, you need to go to the 'Advanced' and change the owner too.
in any case I'm happy this is finally resolved even if I wasn't getting much help responds I used the previous positions of other threads to solve.
Since he was not an official help of WINDOWS or MICROSOFT on that page, I'm sure I did the security setting while making the methods of trial and error on my machine which may not be the right setting from the point of view of security in general, so I'll try to reset the default state machine as my problem is now solved.
So I fixed it. If you need help let me know and I'll try to help you, and I do not charge $149 or $99. ;-)
-
HP 190 t and cannot access network after upgrade to win 8
Upgrade to Windows 8 and cannot access the internet on my desktop HP 190 t. No driver available on the HP support site. I can see received/transmitted data between router but that is as far as it goes. Have ideas or how to get the chipset drivers or should I get another network card? Everything else seems to work very well.
I found the problem. Norton Security Suite does not work with Win 8, causing conflicts. I have remove the application configured defender and firewall Windows to maintain security until Norton product can support 8 Win.
-
How to prevent users to access network of comments?
Hello everyone,
I have a business network (users are using NAM, User and Pass of AD and chaining EAP) and a network of comments (authentication Web portal, local database ISE).
I don't want my corporate users to access the network of comments (to assume she got a user and pass for this). How I do that?
I know that it is possible to block connections on NAM, but I would like to know if we can control it at the ISE, and not on the client.
Thank you.
Unfortunately no, unless you have an identity store that contains the machine of the company mac addresses, you cannot differentiate between comments and pc peripheral companies. Your users don't take their machines outside the corporate network normally?
-
AnyConnect VPN users cannot access remote subnets?
I googled this until blue in the face without result. I don't understand why Cisco this so difficult? When clients connect to the anyconnect vpn, they can access the local subnet, but cannot access the resources in remote offices. What should I do to allow my anyconnect vpn clients access to my remote sites?
Cisco 5510 8.4
Hello
What are remote sites using as Internet gateway? Their default route here leads to the ASA or have their own Internet gateway? If they use this ASA for their Internet connection while they should already have a default route that leads traffic to the VPN to the pool, even if they had no specific route for the VPN itself pool. If they use their own local Internet gateway and the default route is not directed to this ASA then you would naturally have a route on the remote site (and anything in between) indicating the remote site where to join the pool of 10.10.224.0/24 VPN network.
In addition to routing, you must have configured for each remote site and the VPN pool NAT0
Just a simple example of NAT0 configuration for 4 networks behind the ASA and simple VPN field might look like this
object-group network to REMOTE SITES
object-network 10.10.10.0 255.255.255.0
object-network 10.10.20.0 255.255.255.0
object-network 10.10.30.0 255.255.255.0
object-network 10.10.40.0 255.255.255.0
network of the VPN-POOL object
10.10.224.0 subnet 255.255.255.0
NAT static destination DISTANCE-SITES SITES source (indoor, outdoor) REMOTE static VPN-VPN-POOL
The above of course assumes that the remote site are located behind the interface 'inside' (although some networks, MPLS) and naturally also the remote site networks are made for the sake of examples.
Since you are using Full Tunnel VPN should be no problem to the user VPN transfer traffic to this ASA in question.
My first things to check would be configuring NAT0 on the ASA and routing between remote sites and this ASA (regarding to reach the VPN pool, not the ASA network IP address)
Are you sure that the configuration above is related to this? Its my understanding that AnyConnect uses only IKEv2 and the foregoing is strictly defined for IKEv1?
-Jouni
-
Can no longer access network drive with the Explorer of Windows 7 Pro
Up to what a week ago it worked fine. After a weekend of not to use the computer, I noticed that my Synology and WD network drives were not under network in Explorer. I tried to enter the IP address in the address \\10.0.1.36 bar and it says windows cannot access
It is visible and accessible from my other computers. There must be some setting that inadvertently changed, but I can't. It's all in the same workgroup.I can access the drive via the web browser and the software of the player.
Any suggestions?
Hello
Thanks for choosing Windows and thank you for providing an opportunity to help you.
According to the description provided, you have problems with access to the network drive.
Method 1: perform the steps described here below and see if it helps.
a: Click on Start->Control Panel. Double-click on network and sharing Center.
b: In the left pane, click "change advanced sharing settings.
c: Make sure that "discover the network" is turned on.Method 2: temporarily disable the Windows Firewall and check.
Turn Windows Firewall on or off (Windows 7)
Warning: Firewall software can help protect your computer against viruses and other security threats. In most cases, you should not disable your firewall software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your firewall software is disabled, your computer is vulnerable to attacks.
Answer to us if you have problems with access to the road or any other issue of Windows, and we would be happy to help you.
Good day!
Hope this information helps.
-
Blue screen error CANNOT ACCESS HARD DRIVE SPACE
I'm trying to install windows xp after removing windows 8 of my computer and creat new partition using the boot disk windows 98se, fdisk, but the installation during windows startup I get in trouble when get a blue error message screen telling"YOUR COMPUTER'S STARTUP PROGRAM CANNOT ACCESS THE DISK THAT CONTAINS THE PARTITION FREE SPACE, YOU CHOOSE. CANNOT INSTALL WINDOWS XP ON THIS HARD DRIVE. »Image of the screen available message if necessary. There is no error due to this error code.Please help me to solve the problem, and I'll be really thankful to you.Kind regardsKayFirst of all, you need not use a setup of Windows 98 to work partition disk before installing Windows XP, Setup of Windows XP has the tools to do this job.
Windows XP Setup cannot see the hard drive as it doesn't have drivers for the SATA controller on board. To install Windows XP you must go into the BIOS and put the hard drive in IDE mode you will need to integrate the SATA drivers in the XP installation CD, or you need to feed them to the Windows XP Installer with a floppy using the F6 method drive.
Your new PC does support Windows XP, it has Windows XP drivers available for it? If this isn't the case, you will have a lot of crying by train to get there.
John
Maybe you are looking for
-
Now, Firefox is ready for me to start using?
I just want to know if everything is ready for me to start to use firefox?
-
Airport Express not on my network more
My Airport Express has worked wonderfully for years. Today when I tried to use AirPlay, it shows that the Airport Express Terminal dropped out of the network. The network works fine everywhere else, iMac, iPhone, iPad Pro... I checked the plug and i
-
Satellite A200: How to find the serial number
I need to know the ETA of my laptop so I can download the specified drivers...Cause when I did my search, there are several version of the SATELLITE A200...If anyone can help out where I can find it? Thank you!!
-
I have to keep the center of the media on channel 3, and the decoder controls the channel I want to watch or record. For example if I want to record channel 631 21:00 to 23:00 I would say the MC to record channel 3 for as many programs they broadcas
-
When I hit the DELETE key on the keyboard, e-mail disappears. It does not go in my trash folder. How to fix this?